Товары (46.000+)

STM32F031K6U6 - 48MHz Cortex-M0 MCU 32KB Flash | STMicroelectronics
STM32F031K6U6

STM32F031K6U6 - 48MHz Cortex-M0 MCU 32KB Flash | STMicroelectronics

The STM32F031K6U6 is a 32-bit entry-level microcontroller from STMicroelectronics based on the ARM Cortex-M0 core, operating at up to 48 MHz with 32 KB of Flash memory and 4 KB of SRAM in a compact 32-pin UFQFPN (5x5 mm) package with exposed pad. A microcontroller (MCU) is a single-chip embedded processor combining a CPU core, memory, and programmable peripherals. The STM32F031K6U6 belongs to the STM32F0 entry-level family within the STM32 MCU ecosystem, positioned as a migration path from 8-bit and 16-bit MCUs to 32-bit ARM performance. It shares tooling, HAL libraries, and STM32CubeMX configuration software with the wider STM32 portfolio, simplifying future upgrades. Key features include a 12-bit ADC with up to 13 channels, 9 timers, and standard communication interfaces: one I2C, one SPI/I2S, and one USART. The device operates from a 2.0V to 3.6V single supply with integrated POR/PDR reset, and offers a CRC calculation unit and DMA controller for data movement without CPU intervention. Real-time performance is supported by a nested vectored interrupt controller (NVIC) and single-cycle multiplier. The Cortex-M0 architecture executes Thumb instruction sets with deterministic interrupt latency, making the device suitable for real-time control loops. The UFQFPN-32 (QFN family) surface-mount package provides a small 5x5 mm footprint with an exposed thermal pad for grounding, ideal for space-constrained boards. Operating temperature spans -40C to +85C for industrial reliability. Typical applications include industrial control, consumer appliances, IoT sensor nodes, small motor control, and power-management subsystems, where low cost, low power consumption, and adequate peripheral integration matter most. Design tip: decouple VDD pins with 100nF ceramics plus a bulk capacitor, feed VDDA from a clean analog supply to preserve ADC accuracy, and keep NRST properly filtered per the ST datasheet layout guidelines for EMI-robust designs.

Запрос цены Контакты
STM32F038F6P6 - 48MHz Cortex-M0 32KB MCU | STMicroelectronics
STM32F038F6P6

STM32F038F6P6 - 48MHz Cortex-M0 32KB MCU | STMicroelectronics

STMicroelectronics STM32F038F6P6 is a 32-bit ARM Cortex-M0 microcontroller operating up to 48 MHz, with 32 KB of embedded Flash memory, in a 20-pin TSSOP package. The device supports low-voltage operation identified at 1.8 V, 2.5 V, and 3.3 V, making it suitable for compact embedded products that require an economical 32-bit control architecture. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. In the product hierarchy, the STM32F038F6P6 belongs to the STM32F0 family of 32-bit embedded microcontrollers, uses the ARM Cortex-M0 processor core, and operates within the broader category of embedded systems semiconductors. Its reduced instruction set is designed for efficient control tasks rather than high-complexity application processing. Key features include a maximum core frequency of 48 MHz and 32 KB of Flash organized as 32K × 8 bits. The 20-TSSOP package provides a compact surface-mount footprint, while the listed operating voltages support common low-voltage embedded rails. Its Cortex-M0 architecture and 32-bit datapath provide useful processing capability for real-time control, sensor acquisition, communication, and human-interface tasks without requiring a higher-performance processor core. The STM32F038F6P6 belongs to STMicroelectronics' STM32F038x6 family, which is positioned around a high-performance Cortex-M0 core and high-speed embedded control. Its combination of 48 MHz operation, 32 KB Flash, and 20-pin packaging makes it particularly useful where PCB area is constrained but deterministic control and moderate peripheral integration remain important. Developers should select the device against the detailed peripheral, clock, and electrical requirements in the manufacturer datasheet. Typical uses include compact motor-control modules, low-cost condition-monitoring devices, simple user-interface controllers, sensor hubs, and industrial accessories. A 48 MHz Cortex-M0 can manage multiple interrupt-driven tasks and communication routines, while the 32 KB Flash budget can hold a bootloader and application code when code size is carefully managed. The primary design consideration is package and pin planning. Use the pin-description table in the STM32F038F6P6 manufacturer datasheet when assigning alternate-function pins, programming pins, and power pins. Confirm the selected board's operating voltage and decoupling arrangement, and verify all peripheral assignments against the exact package variant before releasing the PCB layout. This page combines manufacturer product information, distributor observations, package details, source-backed pricing, drop-in alternatives, and practical design guidance to support faster component selection. It also distinguishes confirmed electrical attributes from parameters that still require direct verification against the manufacturer datasheet.

Запрос цены Контакты
STM32F042C4T6 - 48MHz Cortex-M0 16KB MCU | STMicroelectronics
STM32F042C4T6

STM32F042C4T6 - 48MHz Cortex-M0 16KB MCU | STMicroelectronics

The STMicroelectronics STM32F042C4T6 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 16 KB of Flash memory, 6 KB of SRAM, USB full-speed, CAN, and a 12-bit ADC, housed in a 48-LQFP 7 x 7 mm package. It is designed for compact embedded-control products requiring USB connectivity, CAN communication, and a broad set of serial peripherals. A microcontroller, or MCU, integrates a processor core, memory, peripherals, and communication interfaces on one semiconductor device. The STM32F0 family belongs to the Arm Cortex-M0 microcontroller hierarchy and combines a low-complexity 32-bit instruction set with deterministic embedded control. In the STM32F042C4T6, the CPU executes from embedded Flash while SRAM supports working data and stack operations. USB, CAN, USART, SPI, and I2C support connected products, industrial controls, and service equipment. The device combines a 48 MHz maximum operating frequency, 16 KB Flash, and 6 KB SRAM with a 12-bit ADC capable of handling up to 10 channels. USB 2.0 full-speed, CAN, multiple USART and SPI interfaces, I2C, timers, and a CEC-related feature make it suitable for compact USB-aware control nodes. The 48-LQFP package provides 48 externally accessible pins and is appropriate for designs requiring conventional leaded-package assembly and inspection. The STM32F042C4T6 is positioned as a mainstream Arm Cortex-M0 MCU with a 2.5 V to 3.6 V supply range, as identified in distributor listings. Its 48-pin LQFP footprint simplifies access to communication and general-purpose I/O compared with smaller packages. Designers should confirm the complete pin multiplexing, clock, USB, CAN, and analog specifications against the manufacturer datasheet before releasing a production board. Typical applications include USB-connected peripheral controllers, industrial communication modules, CAN nodes, data-acquisition equipment, consumer accessories, and compact embedded-control systems. The MCU can act as the central controller for a USB peripheral while using CAN or serial interfaces for local communication. Its 12-bit ADC supports analog monitoring, while timers and GPIO provide control and sensing connections. Design guidance focuses on preserving USB signal integrity and separating analog, digital, and return-current paths. Place USB differential routing over a continuous reference plane, keep the USB transceiver and decoupling components close to their relevant pins, and validate firmware clocks and peripheral initialization against the manufacturer reference procedure. This page consolidates verified distributor specifications, sourcing information, and engineering-oriented usage guidance.

Запрос цены Контакты
STM32F042C6T6 - 48MHz Cortex-M0 32KB Flash USB MCU | STMicroelectronics
STM32F042C6T6

STM32F042C6T6 - 48MHz Cortex-M0 32KB Flash USB MCU | STMicroelectronics

The STMicroelectronics STM32F042C6T6 is a 32-bit ARM Cortex-M0 microcontroller operating up to 48 MHz, with 32 KB of Flash memory, 6 KB of SRAM, USB full-speed device support, and CAN connectivity in a 48-LQFP package. It is designed for compact USB-connected embedded systems requiring a low-cost, low-power general-purpose MCU. A microcontroller integrates a CPU core, memory, and peripheral blocks into one semiconductor device. The STM32F0 family uses an Arm Cortex-M0 core within the broader 32-bit embedded microcontroller hierarchy, providing deterministic control performance, efficient interrupt handling, and a broad ecosystem of software development tools. The STM32F042C6T6 targets USB, CAN, industrial-control, consumer-electronics, and accessory applications. The device operates from a 2.5 V or 3.3 V supply, as identified in the distributor listing. Its 48 MHz maximum operating frequency supports responsive control loops and USB full-speed device communication compliant with USB 2.0. The integrated USB device peripheral includes an internal USB PHY and embedded DP pull-up, while the datasheet summary identifies battery-charging detection support according to the Battery Charging Specification Revision 1.2. The STM32F042x4/x6 family also provides a CAN peripheral, making the MCU appropriate for industrial and embedded communication systems. The 48-LQFP 7x7 mm package exposes the required GPIO, communication, power, debug, and clock connections in a widely manufacturable surface-mount format. Typical uses include USB-connected configuration tools, data acquisition modules, compact industrial controllers, CAN-connected sensor nodes, and USB peripheral accessories. The 32 KB Flash capacity is appropriate for applications with moderate firmware size, while the 48 MHz core provides useful performance margin for protocol handling and real-time control. Designers should confirm the exact pin multiplexing, crystal requirements, USB implementation guidance, and decoupling values against the manufacturer datasheet before layout. This page combines distributor availability data, manufacturer specifications, package information, and application guidance to support component selection and sourcing.

Запрос цены Контакты
STM32F042C6U6 - 48MHz, 32KB Flash Cortex-M0 MCU | ST
STM32F042C6U6

STM32F042C6U6 - 48MHz, 32KB Flash Cortex-M0 MCU | ST

The STMicroelectronics STM32F042C6U6 is an ARM Cortex-M0 32-bit microcontroller operating up to 48 MHz, with 32 KB Flash memory and a 48-pin UFQFPN 7 x 7 mm package. Its USB, CAN, timers, ADC, and communication interfaces make it suitable for connected embedded control, USB accessories, industrial sensing, and compact consumer products. The STM32F0 architecture combines a deterministic RISC core with extensive peripheral integration in a low-pin-count surface-mount package. A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, and peripherals such as timers, serial interfaces, analog converters, and communication controllers. The STM32F042C6U6 belongs to the STM32F0 family, where the Cortex-M0 core sits at the lowest-complexity level of the ARM Cortex-M portfolio. This hierarchy makes the device appropriate for control-oriented products that need broad peripheral support without requiring a higher-performance application processor. Key verified features include a 48 MHz maximum operating frequency, 32 KB Flash, a 32-bit ARM Cortex-M0 core, and crystal-less USB full-speed support identified in the available datasheet preview. Distributor listings also identify USB and CAN functionality. The 48-UFQFPN package measures 7 x 7 mm and includes an exposed pad according to the supplied component listings, supporting compact layouts while providing a dedicated thermal and grounding connection area subject to the manufacturer's layout guidance. The STM32F0 architecture supports embedded firmware development around standard serial interfaces, analog measurement, timing, and USB communication. At 48 MHz, the MCU provides more timing margin for protocol handling, control loops, and peripheral coordination than lower-frequency STM32F0 devices. Because the verified data does not state SRAM size, ADC resolution, timer channels, or exact USB electrical limits, those values should be confirmed in the official STM32F042x4/x6 documentation before final design signoff. Typical uses include USB-to-serial or configuration accessories, low-cost CAN-connected nodes, industrial sensor controllers, compact motor-control auxiliaries, and USB-powered embedded products. The MCU is especially attractive when designers want STM32 tooling and firmware portability while retaining a compact UFQFPN footprint. Firmware, boot configuration, clocking, low-power behavior, and peripheral pin multiplexing must be selected from the manufacturer's device documentation rather than inferred from distributor summaries. For PCB implementation, follow the official UFQFPN land pattern and exposed-pad recommendations exactly. Place decoupling capacitors close to each applicable supply pin, route high-speed USB signals as a controlled differential pair, and preserve the manufacturer's thermal-pad copper and via guidance. Confirm oscillator, reset, boot, and USB requirements for the selected board configuration. This page synthesizes the verified distributor inventory, package information, architecture, and engineering considerations into a compact design reference. This product data is limited to facts present in the supplied verified web results and deliberately identifies unverified parameters instead of guessing. Lifecycle, electrical limits, pin names, memory-map details, and absolute maximum ratings require confirmation from STMicroelectronics before production release.

Запрос цены Контакты
STM32F042F4P6 - 48MHz Cortex-M0 16KB MCU | STMicroelectronics
STM32F042F4P6

STM32F042F4P6 - 48MHz Cortex-M0 16KB MCU | STMicroelectronics

The STMicroelectronics STM32F042F4P6 is a 32-bit ARM Cortex-M0 microcontroller operating up to 48 MHz, with 16 KB of Flash memory, 6 KB of SRAM, and USB, CAN, and CEC connectivity in a 20-pin TSSOP package. The device is designed for compact embedded systems requiring a low-cost general-purpose MCU, a USB peripheral, and communication interfaces in a small surface-mount footprint. A microcontroller is an integrated semiconductor containing a processor core, memory, and peripherals on one chip. The STM32F0 MCU family belongs to the embedded-processing hierarchy: microcontroller → 32-bit RISC MCU → ARM Cortex-M0 microcontroller → embedded-control device. Its combination of 48 MHz processing speed, USB connectivity, and a 20-pin package makes it useful for USB-connected control, industrial interface, and compact consumer products. Key features include a 32-bit ARM Cortex-M0 core, 48 MHz maximum operating frequency, and 16 KB of Flash for firmware storage. The device also provides 6 KB of SRAM and integrated USB, CAN, and CEC functions. Its 2.4 V to 3.6 V operating-supply range suits 3.3 V systems, while the 20-TSSOP package supports compact, high-density PCB layouts. These characteristics balance processing performance and interface coverage without requiring a larger pin count. The STM32F0 architecture is based on a 32-bit reduced-instruction-set-computing core intended for efficient embedded control. Flash-resident code and SRAM support boot-time firmware, event handling, communication stacks, and peripheral control, while USB and CAN provide paths for connected equipment and industrial networking. The USB and CAN interfaces distinguish this device from basic Cortex-M0 microcontrollers that support only serial or general-purpose interfaces. Typical applications include USB human-interface-interface accessories, compact industrial controllers, CAN-connected sensors, consumer electronics, and battery-operated equipment. The MCU can also manage LED interfaces, communication bridges, and low-speed embedded control tasks where board area is constrained. Its 20-pin package and 3.3 V supply architecture simplify integration into compact USB dongles, control modules, and secondary embedded processors. Designers should reserve all 20 TSSOP positions, route the USB data and power pins according to the manufacturer reference design, and confirm firmware support for the selected USB, CAN, and CEC peripheral configuration before PCB release. The 16 KB Flash limit requires attention to bootloader size, protocol libraries, and application code. For a production migration, verify pin multiplexing, clock setup, peripheral mapping, and interrupt behavior against the manufacturer datasheet. This page combines the official STM32F042F4 product information, exact-order-code listings, interface and memory details, same-brand drop-in alternatives, and practical integration guidance. It is intended to accelerate part selection, schematic review, firmware planning, and footprint verification for engineers designing with the STM32F042F4P6.

Запрос цены Контакты
STM32F042F6P6 - 48MHz Cortex-M0 32KB MCU | STMicroelectronics
STM32F042F6P6

STM32F042F6P6 - 48MHz Cortex-M0 32KB MCU | STMicroelectronics

The STMicroelectronics STM32F042F6P6 is a 32-bit ARM Cortex-M0 microcontroller in a 20-pin TSSOP package, operating at up to 48 MHz with 32 KB of Flash memory, USB, and CAN connectivity. The device is designed for compact embedded systems that require a fast Cortex-M0 core and dedicated USB or CAN communication without the resource demands of a larger microcontroller family. According to the manufacturer product page, the STM32F042x4/x6 series combines high-performance embedded processing with a rich peripheral set for cost-sensitive control, communications, and human-interface applications. A microcontroller is a programmable system-on-chip that integrates a CPU core, Flash program memory, SRAM, peripherals, and communication interfaces onto one package. Within the product hierarchy, the STM32F042F6P6 is an ARM Cortex-M0 microcontroller, a 32-bit RISC device within the STM32F0 family, and a member of the broader embedded-processing and power-management ecosystem. Its 48 MHz operating frequency supports responsive control loops, while the USB and CAN peripherals provide dedicated paths for personal-computer connectivity and industrial or automotive network communication. Key features include a 48 MHz ARM Cortex-M0 core, 32 KB of Flash memory, a 12-bit ADC, USB and CAN interfaces, and operation from 2.5 V to 3.3 V. The 20-pin TSSOP package measures 4.4 mm in body width and is intended for surface-mount assembly. The -40 °C to +85 °C temperature range supports industrial-temperature commercial equipment, although extended-temperature variants should be selected when wider environmental margins are required. The STM32F0 architecture provides a practical balance between processing performance, peripheral integration, and low system complexity. Its 32-bit instruction set and dedicated communication blocks allow firmware consolidation when a design otherwise needs separate USB and CAN interface controllers. Peripheral multiplexing should be checked against the selected board configuration because assigning USB, CAN, timers, and general-purpose I/O can limit the number of simultaneously available port pins. Typical applications include USB-connected control panels, CAN-connected sensor nodes, compact industrial controllers, USB-to-serial adapters, small human-interface products, and embedded systems that require a low-pin-count Cortex-M0 implementation. The MCU also suits compact actuator controllers and peripheral modules where a USB service interface simplifies configuration and firmware updates. When laying out the board, place the decoupling capacitors beside the power pins, route the USB data lines as a controlled impedance pair, and keep the CAN transceiver interface away from sensitive analog paths. Confirm the exact peripheral-pin multiplexing, clock configuration, and pin electrical limits in the manufacturer datasheet before releasing the PCB layout.

Запрос цены Контакты
STM32F042F6P7 - 48MHz Cortex-M0 MCU, 32KB Flash | STMicroelectronics
STM32F042F6P7

STM32F042F6P7 - 48MHz Cortex-M0 MCU, 32KB Flash | STMicroelectronics

STMicroelectronics STM32F042F6P7 is an ARM Cortex-M0 32-bit microcontroller operating up to 48 MHz, with 32 KB (32K x 8) Flash memory and USB, CAN, and other connectivity, in a 20-TSSOP package. It belongs to the STM32F0 family of compact, low-power embedded MCUs for cost-sensitive control applications. A microcontroller integrates a CPU core, program memory, data memory, peripherals, and communication interfaces on one semiconductor device. The STM32F0 series provides a simple architecture for embedded control, while this part adds USB and CAN connectivity for connected industrial, automotive, and consumer equipment. The STM32F042x4/x6 family description identifies the Cortex-M0 core and 48 MHz maximum operating frequency. Key verified features include a 32-bit ARM Cortex-M0 core, 48 MHz maximum clock frequency, and 32 KB Flash program memory. The 20-TSSOP package supports compact PCB layouts, and the exact suffix P7 identifies the supplied device ordering variant. The Mouser listing also identifies the part as a mainstream ARM Cortex-M0 USB-line MCU with 32 KB Flash, USB, and CAN. The STM32F042F6P7 combines a compact 20-pin TSSOP with general-purpose embedded-control capability and wired connectivity. It is suitable for designs that need more than basic GPIO control but do not require a high-pin-count package. The verified data does not specify RAM size, operating-voltage range, GPIO count, ADC details, timers, or package dimensions, so those values must be confirmed in the manufacturer documentation before final design release. Typical uses include USB-connected human-interface devices, CAN-connected industrial controls, compact sensor nodes, automotive accessories, low-cost communication equipment, and small controller boards. Its 48 MHz Cortex-M0 core provides useful processing headroom while retaining the simple programming model associated with ARM Cortex-M devices. Designers should treat the 20-TSSOP footprint, pin multiplexing, power requirements, clock strategy, and USB or CAN transceiver integration as the critical review points. A MCU cannot connect directly to a physical USB or CAN bus without the appropriate external circuitry, protection, routing, and signal-integrity implementation. This page combines verified manufacturer and distributor facts, transparent data gaps, package information, application guidance, and practical design cautions. It helps engineers distinguish confirmed STM32F042F6P7 characteristics from parameters that still require verification from the official datasheet.

Запрос цены Контакты
STM32F042G6U6 - 48MHz Cortex-M0 USB MCU | STMicroelectronics
STM32F042G6U6

STM32F042G6U6 - 48MHz Cortex-M0 USB MCU | STMicroelectronics

The STMicroelectronics STM32F042G6U6 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 32 KB of embedded Flash memory and USB and CAN connectivity in a 28-pin UFQFPN package measuring 4 mm by 4 mm. It targets compact embedded systems that need deterministic control, USB connectivity, and CAN communication without requiring a larger microcontroller package. A microcontroller, or MCU, is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and I/O into one package. The STM32F0 family belongs to the 32-bit embedded-controller segment of the broader semiconductor hierarchy. This combination of compact packaging, USB, CAN, and a 48 MHz Cortex-M0 core makes the STM32F042G6U6 useful for cost-sensitive human-interface, communications, industrial-control, and accessory designs. The STM32F042G6U6 provides 32 KB of Flash for firmware and 32-bit processing through the ARM Cortex-M0 core. Its listed communications features include USB and CAN, while its 28-pin UFQFPN package supports compact board layouts. The 48 MHz operating frequency provides additional timing margin for protocol handling, control loops, and user-interface tasks. Exact RAM, peripheral-count, voltage-range, and temperature-range values should be confirmed in the manufacturer datasheet before a production release. The STM32F042x4/x6 architecture is designed around STMicroelectronics’ ARM Cortex-M0 implementation, combining a compact RISC core with embedded control peripherals and integrated communications. USB support allows the MCU to enumerate as a USB device, while CAN provides a standardized interface for industrial and vehicle-related networking. Firmware migration within the STM32F0 ecosystem is easier when the device family, clock configuration, peripheral set, and development toolchain are evaluated together rather than by clock speed alone. Typical applications include USB-connected control accessories, CAN-connected sensor modules, compact industrial controllers, USB-to-CAN interface boards, and embedded user-interface products. The 4 mm by 4 mm package is especially useful where connector density limits PCB area. Designers should reserve adequate board area for routing USB differential pairs and CAN signal paths while maintaining power and ground return continuity. Design the decoupling network around the device power pins and follow the recommended external-component arrangement in the manufacturer datasheet. USB differential routing requires controlled impedance, short matched traces, and a continuous ground reference. CAN networks also need correct termination and transceiver interfacing; the MCU’s CAN peripheral does not replace the physical CAN transceiver. Firmware, clock, bootloader, and peripheral configurations must be revalidated whenever the exact ordering code changes. This page combines the manufacturer product information with package, interface, application, replacement, and procurement guidance to help engineers evaluate the STM32F042G6U6 efficiently. It also distinguishes confirmed drop-in interchangeability from merely similar controllers, helping prevent a footprint-compatible but feature-incompatible substitution from entering a production design.

Запрос цены Контакты
STM32F042K4T6 - 48MHz Cortex-M0 16KB MCU | STMicroelectronics
STM32F042K4T6

STM32F042K4T6 - 48MHz Cortex-M0 16KB MCU | STMicroelectronics

The STMicroelectronics STM32F042K4T6 is an ARM Cortex-M0 32-bit microcontroller with a 48 MHz clock, 16 KB Flash memory, and a 32-LQFP 7 x 7 mm package. It is part of the STM32F0 family and is described by distributor data as a mainstream MCU with USB, CAN, 2.5 V and 3.3 V supply options, and a 32-pin LQFP package. These characteristics place it in the connected embedded-control segment, where moderate processing speed and serial connectivity are more important than high flash capacity. What is an ARM Cortex-M0 microcontroller? An MCU is an integrated semiconductor containing a processor core, memory, peripherals, and interfaces on one package. The ARM Cortex-M0 is a compact 32-bit embedded processor core designed for cost-sensitive, energy-efficient control systems. In the STM32F0 family, it supports embedded control, USB communications, CAN networking, and general-purpose peripherals within a small power-management and processing footprint. Key features include a 48 MHz maximum CPU frequency and 16 KB of Flash memory. The verified distributor listing identifies 16 KB organized as 16K x 8 and identifies USB and CAN connectivity. The STM32F042K4T6 is also listed with 2.5 V and 3.3 V operating-supply descriptions in distributor data. Its 32-LQFP 7 x 7 mm package provides 32 external pins for power, clock, communication, and general-purpose I/O connections. The device is suited to compact USB-connected peripherals, CAN-based industrial interfaces, low-cost control panels, sensor hubs, and embedded instrumentation. Its 48 MHz Cortex-M0 core is appropriate for interrupt-driven control, protocol handling, and application logic where a higher-performance Cortex-M3 or Cortex-M4 core is unnecessary. The 16 KB Flash capacity requires attention when selecting firmware size, boot code, and application-code partitioning. For PCB implementation, confirm the exact pin assignment and exposed functionality against the manufacturer datasheet before routing USB, CAN, crystal, reset, and supply connections. The provided search data does not include a complete electrical timing table, absolute maximum ratings, transceiver details, or a verified pin-by-pin description; those values require manufacturer documentation. The 32-LQFP package is suitable for automated assembly and is distinct from STM32F042K4U6, which uses a different package option. This page synthesizes verified distributor specifications, package information, pricing references, available cross-reference candidates, and practical sourcing considerations for engineers evaluating the STM32F042K4T6. Confirm current stock, lifecycle status, and manufacturer documentation before production release.

Запрос цены Контакты
STM32F042K4U6 - 48MHz 16KB USB/CAN MCU | STMicroelectronics
STM32F042K4U6

STM32F042K4U6 - 48MHz 16KB USB/CAN MCU | STMicroelectronics

The STMicroelectronics STM32F042K4U6 is an ARM Cortex-M0 32-bit microcontroller operating at up to 48 MHz, with 16 KB of Flash memory, USB and CAN connectivity, and a 2.5 V or 3.3 V supply in a 32-pin UFQFPN package measuring 5 mm by 5 mm. Its combination of USB, CAN, compact packaging, and 48 MHz processing makes it suitable for connected control systems, USB-to-CAN bridges, compact human-interface devices, and industrial equipment requiring a low-footprint embedded controller. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32F0 series belongs to the hierarchy of embedded microcontroller ICs, system-on-chip devices, and programmable control components. The STM32F042K4U6 uses the ARM Cortex-M0 RISC core, which executes 32-bit instructions while keeping the device suitable for cost-sensitive, low-power embedded designs. The STM32F042K4U6 combines a 48 MHz clock with 16 KB of programmable Flash for firmware. Its communication features include USB and CAN, while the 2.5 V or 3.3 V operating range supports common embedded supply rails. The 32-pin UFQFPN package has a 5 mm by 5 mm body, allowing the device to provide USB, CAN, and general-purpose control functions without requiring a larger high-pin-count package. The ARM Cortex-M0 architecture is designed around a compact instruction set and an interrupt-driven embedded-control model. Firmware can use the STM32 programming ecosystem and peripheral peripherals to manage USB device communication, CAN frames, timers, serial interfaces, and digital inputs and outputs. Exact RAM content, peripheral counts, GPIO count, and electrical limits must be confirmed in the manufacturer datasheet before finalizing the board design. Typical applications include USB-connected industrial accessories, CAN-based monitoring modules, compact data-acquisition controllers, USB-to-CAN interface equipment, and cost-sensitive embedded products. USB is useful for direct host connectivity, while CAN supports robust communication between distributed industrial nodes. The 48 MHz processing rate provides useful timing margin for protocol handling and control tasks in compact assemblies. PCB design should preserve the compact 5 mm by 5 mm footprint and route USB and CAN interfaces according to the manufacturer reference layout. Decoupling, grounding, exposed-pad thermal management, and signal-routing discipline are essential for reliable operation. Firmware and peripheral configurations should also be checked against the exact ordering code because similarly named STM32F0 devices can differ in memory and feature sets.

Запрос цены Контакты
STM32F042K6T6 - 48MHz Cortex-M0 MCU 32KB Flash USB | STMicroelectronics
STM32F042K6T6

STM32F042K6T6 - 48MHz Cortex-M0 MCU 32KB Flash USB | STMicroelectronics

The STMicroelectronics STM32F042K6T6 is a 32-bit ARM Cortex-M0 microcontroller running at up to 48 MHz, integrating 32 KB of Flash memory and 6 KB of SRAM in a 32-pin LQFP (7x7 mm) package. It targets USB-enabled mainstream embedded designs requiring a low pin count, USB 2.0 Full-Speed Device with on-chip PHY, CAN 2.0B interface, and a rich set of peripherals including timers, ADC, comparators, and communication interfaces. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and peripheral interfaces. Within the broader taxonomy, the STM32F042K6T6 sits at the intersection of embedded processor -> ARM Cortex-M0 core -> 32-bit RISC MCU -> mainstream connectivity line MCU. The Cortex-M0 architecture uses the Thumb/Thumb-2 instruction set and is designed for deterministic, low-power real-time control, making the F042 series ideal for USB Type-C accessories, human-interface devices, and small-form-factor sensor nodes. Key features include 32 KB Flash with read-while-write support, 6 KB SRAM with hardware parity, a 12-bit 1 Msps ADC with up to 13 external channels, two 16-bit timers, one 32-bit timer, an independent watchdog, a real-time clock, and a USB 2.0 Full-Speed Device interface with integrated PHY that eliminates the need for an external USB transceiver. The device operates from 2.0V to 3.6V and supports both 2.5V and 3.3V application rails, with multiple low-power modes (Sleep, Stop, Standby) suited to battery-powered products. Architecturally, the STM32F042K6T6 leverages ST's 90 nm embedded Flash process and the Cortex-M0 v6-M core with single-cycle multiplier, achieving 0.93 DMIPS/MHz. The integrated 4-16 MHz HSI oscillator with PLL, plus a 32 kHz LSI for the RTC, allow bill-of-material reduction by removing the external crystal in non-USB applications. The CAN 2.0B interface, combined with USB, makes this part uniquely positioned among Cortex-M0 devices for industrial control and automotive body networks. Typical applications include USB HID peripherals (keyboards, mice, custom HID), USB-to-UART bridges, USB-C audio accessories, CAN node endpoints in industrial networks, small motor control boards, smart-home sensor hubs, and USB-charged IoT endpoints. The 32-pin LQFP footprint is breadboard-friendly and supports hand-rework prototypes while remaining suitable for high-volume SMT assembly. Design consideration: because USB DP/DM pins are bonded to specific GPIO pins (PA11/PA12), designers must avoid remapping these to alternate functions when the USB peripheral is enabled. The integrated pull-up resistor on the DP line is software-controlled, simplifying bus-powered designs. For CAN applications, an external transceiver (e.g., SN65HVD230) is still required because the F042 provides only the protocol controller. This page synthesizes distributor pricing, drop-in same-package alternatives, and design considerations not found in a single datasheet excerpt.

Запрос цены Контакты
STM32F042K6U6 - 48MHz Cortex-M0 USB MCU | STMicroelectronics
STM32F042K6U6

STM32F042K6U6 - 48MHz Cortex-M0 USB MCU | STMicroelectronics

The STMicroelectronics STM32F042K6U6 is an ARM Cortex-M0 32-bit microcontroller operating at up to 48 MHz, with 32 KB of Flash memory and USB, CAN, and embedded-control peripherals, in a 32-pin UFQFPN package. The verified distributor listing identifies a 5x5 mm package and a 2.5 V/3.3 V supply class. This MCU belongs to the STM32F0 family and is positioned for compact embedded products requiring USB connectivity and a broad peripheral set. A microcontroller is an integrated circuit containing a processor core, memory, and peripherals on one device. The STM32F042K6U6 combines an ARM Cortex-M0 RISC core with embedded Flash and RAM resources, allowing a control system to execute firmware and interface with sensors, communications links, and actuators. In the hierarchy, it is a 32-bit microcontroller, embedded processor, semiconductor, and programmable control component. Verified features include a maximum 48 MHz operating frequency, 32 KB of Flash memory, USB, CAN, and an ARM Cortex-M0 CPU. The STMicroelectronics product page also describes high-speed embedded memory and the STM32F042x4/x6 device family. These features make the device relevant to USB-enabled human-interface equipment, industrial control nodes, communications modules, and low-cost embedded systems where a small package and integrated connectivity are useful. The U6 ordering code identifies the 32-pin UFQFPN option, while the exposed-pad package and tray presentation are reflected in the verified distributor data. The package is a surface-mount QFN-family component designed for PCB mounting. The exact RAM size, GPIO count, ADC resolution, supply limits, and pin names are not stated in the supplied verified data and must be confirmed from the manufacturer datasheet before design release. Typical design decisions include checking the USB clock configuration, CAN transceiver interface, bootloader workflow, and firmware peripheral mapping in the STM32CubeMX or equivalent STM32 toolchain. USB signal routing requires controlled impedance and careful placement of the USB data lines; CAN routing should account for transceiver requirements, termination, and protection. Designers should also confirm the exposed-pad thermal and assembly requirements from the manufacturer documentation. This product page consolidates the verified manufacturer identity, distributor specifications, package information, and sourcing context into one engineering reference. It does not substitute datasheet values that were not supplied in the verified web data. Confirm the official datasheet, errata, pinout, memory map, and electrical limits before PCB release or production qualification.

Запрос цены Контакты
STM32F048G6U6 - 48MHz Cortex-M0 32KB MCU | STMicroelectronics
STM32F048G6U6

STM32F048G6U6 - 48MHz Cortex-M0 32KB MCU | STMicroelectronics

The STMicroelectronics STM32F048G6U6 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 32 KB of Flash memory in a 28-pin UFQFPN 4 x 4 mm package. The device targets compact, low-voltage embedded systems that require efficient control processing without a high pin count. Its compact package and 48 MHz Cortex-M0 core make it suitable for compact consumer controls, sensing modules, industrial automation equipment and communication-oriented peripherals. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, peripherals and communication interfaces on one package. Within the embedded-system hierarchy, the STM32F048G6U6 is an ARM Cortex-M0 MCU, a 32-bit RISC microcontroller and a member of the STM32F0 product family. The Cortex-M0 architecture emphasizes low power consumption, simple instruction execution and deterministic behavior in cost-sensitive embedded control systems. The principal specifications are a maximum CPU frequency of 48 MHz, 32 KB of Flash program memory and a 28-UFQFPN package measuring 4 x 4 mm. The listing identifies the device as a low-voltage part operating from 1.8 V. Its 32-bit processing architecture provides more computational headroom than an 8- or 16-bit MCU while retaining the simple programming model associated with the Cortex-M0 core. The STM32F048G6U6 combines general-purpose embedded control with the peripheral integration expected from the STM32F0 family. Its small footprint reduces PCB area requirements, while the exposed-pad-style UFQFPN construction supports thermal dissipation when the operating conditions require it. Engineers should select input and output decoupling capacitors according to the manufacturer reference circuit and validate the power-management limits for the intended voltage and temperature range. Typical applications include compact motor-control modules, low-cost industrial sensors, programmable logic controllers, communication equipment and small consumer appliances. The 48 MHz clock rate is useful for protocol handling, digital control loops and coordinating multiple peripheral functions. The 32 KB Flash capacity is appropriate for compact firmware that includes application logic, boot handling, communications and configuration storage. A critical design consideration is the small 4 x 4 mm land pattern. Use the manufacturer pinout and footprint data to place all 28 package pins, connect the exposed thermal pad as directed and maintain adequate copper around the device for heat spreading. Confirm oscillator, debug, reset and communication connections against the application circuit before committing the PCB layout. This product page combines manufacturer and distributor specifications, a package-level alternative comparison and practical PCB guidance. It also distinguishes genuine same-package STM32 family options from broader cross-brand MCU choices, helping engineers evaluate replacement risk without treating every Cortex-M0 product as a direct substitute.

Запрос цены Контакты
STM32F051C6T6 - 48MHz 32KB Cortex-M0 MCU | STMicroelectronics
STM32F051C6T6

STM32F051C6T6 - 48MHz 32KB Cortex-M0 MCU | STMicroelectronics

STMicroelectronics STM32F051C6T6 is an ARM Cortex-M0 32-bit RISC microcontroller operating at up to 48 MHz, with 32 KB of flash memory in a 48-LQFP package. The device operates from 2.0 V to 3.6 V and targets cost-sensitive embedded systems that require deterministic control, efficient peripheral integration, and compact package options. A microcontroller is a programmable semiconductor device that combines a processor core, program memory, data memory, and peripherals on one integrated circuit. The STM32F051 series belongs to the STM32F0 family, where the ARM Cortex-M0 core forms the foundation of a general-purpose embedded-control hierarchy spanning MCU, embedded processor, and semiconductor categories. The STM32F051C6T6 combines a 48 MHz maximum clock with 32 KB of flash for firmware storage. Its operating voltage range of 2.0 V to 3.6 V supports low-voltage embedded systems, while the 48-LQFP package exposes a broad set of I/O resources for control boards and compact automation equipment. The suffix T6 identifies an STMicroelectronics ordering configuration associated with the specified temperature and package options. At its core, the STM32F051C6T6 uses the 32-bit ARM Cortex-M0 RISC architecture, enabling efficient C-language firmware development with an ecosystem of general-purpose microcontrollers. The 32 KB flash configuration provides room for boot code, application logic, and configuration data in cost-sensitive designs. Exact RAM capacity, peripheral inventory, timer resources, and analog performance should be confirmed in the manufacturer datasheet before final design release. Typical uses include industrial control modules, compact sensor nodes, appliance controllers, building automation interfaces, and low-cost embedded instruments. In each application, the MCU can consolidate multiple control tasks into one device while operating from a 2.0 V to 3.6 V supply. Its 48 MHz Cortex-M0 processing capability is appropriate for digital control, communication handling, and peripheral coordination where a higher-performance Cortex-M core is unnecessary. PCB planning should follow the 48-LQFP land pattern and pin assignments defined by the manufacturer. Keep power and decoupling connections compact, provide clean grounding for digital and analog functions, and verify oscillator, reset, programming-interface, and I/O requirements against the device pin-description table. Adequate thermal copper and a stable 2.0 V to 3.6 V supply are essential for reliable operation. This page combines the core architecture, memory, voltage, package, and application characteristics of the STM32F051C6T6 with practical sourcing guidance, replacement considerations, and PCB design notes. These engineering details help teams assess MCU suitability before downloading the official documentation and committing the device to a production design.

Запрос цены Контакты
STM32F051C6T7 - 48MHz ARM Cortex-M0 MCU, 32KB Flash | STMicroelectronics
STM32F051C6T7

STM32F051C6T7 - 48MHz ARM Cortex-M0 MCU, 32KB Flash | STMicroelectronics

The STMicroelectronics STM32F051C6T7 is an entry-level 32-bit ARM Cortex-M0 microcontroller in the STM32F0 Access Line, operating at up to 48 MHz with 32 KB of embedded Flash and 4 KB of SRAM. Housed in a 48-pin LQFP (7x7 mm) package, it operates from a 2.0 V to 3.6 V supply and integrates a high-performance RISC core with 1.25 DMIPS/MHz (0.9 DMIPS/MHz in Thumb mode) for deterministic embedded control. The -T7 industrial temperature grade spans -40 °C to +105 °C, while the part remains in active production on STMicroelectronics' mainstream MCU portfolio. An ARM Cortex-M0 microcontroller is a 32-bit RISC processor core implementing the ARMv6-M architecture, optimized for energy-efficient, deterministic real-time control. The Cortex-M0 belongs to the microcontroller (MCU) family within the broader taxonomy of microprocessors -> microcontrollers -> ARM Cortex-M series -> Cortex-M0. Cortex-M0 parts prioritize low cost, low power, and a Thumb-only instruction set, positioning the STM32F051C6T7 as a cost-down alternative to Cortex-M3/M4 parts where advanced DSP and floating-point are not required. Key features include up to 55 fast I/Os (5V-tolerant), an 11-channel 12-bit 1 µs ADC, one 12-bit DAC, two 16-bit timers, one 32-bit timer, an advanced-control PWM timer for motor control, two I²C, two SPI, one I²S, one HDMI-CEC, one USB 2.0 FS device (in companion STM32F052 variants, not on this 051C6), and a 4-channel DMA controller. A real-time clock (RTC), two watchdog timers, and a SysTick timer provide the timing backbone for safety-critical firmware. The integrated voltage regulator supports a low-power Sleep/Stop/Standby mode set with RTC retention. Architecturally, the device uses ST's 90 nm embedded Flash process and a bus matrix interconnecting the Cortex-M0 core, DMA, and the AHB/APB peripheral bridge. A single 8 MHz HSI oscillator (with 6-bit trim) plus a 40 kHz LSI and 4-32 MHz HSE crystal driver cover all common clocking topologies. The 12-bit ADC achieves 1 Msps with up to 19 multiplexed channels, and the 12-bit DAC supports buffered output for analog signal generation. Hardware CRC, a unique 96-bit device ID, and a JTAG/SWD debug port round out the on-chip resources. Typical applications include consumer electronics, motor control (small BLDC/PMSM with the advanced-control timer), USB HID peripherals (on 052x variants), home appliances, lighting, and low-cost IoT sensor nodes. The 48-pin LQFP footprint is friendly to 2-layer hobbyist PCBs and 4-layer industrial designs alike. When laying out the PCB, place a 100 nF decoupling capacitor within 2 mm of every VDD pin, keep the HSE crystal traces short, and provide a solid ground pour under the exposed-pad-adjacent pins to minimize EMI. Use SWD rather than JTAG to free up to 3 GPIOs for the application. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that complement (not duplicate) the ST datasheet. - The maximum ADC conversion rate is 1 Msps at 12-bit resolution (scaled down to 800 ksps at full Vdd range). - The advanced-control timer (TIM1) supports complementary PWM outputs with programmable dead-time insertion. - The LQFP-48 package has a JEDEC MSL-3 moisture sensitivity level and is Pb-free (RoHS compliant). - Programming/debug is supported via ST-LINK/V2-1, J-Link, and the on-chip ROM bootloader (USART1 boot pins).

Запрос цены Контакты
STM32F051C6U6 - 48MHz Cortex-M0 MCU 32KB Flash 48-UFQFPN | STMicroelectronics
STM32F051C6U6

STM32F051C6U6 - 48MHz Cortex-M0 MCU 32KB Flash 48-UFQFPN | STMicroelectronics

The STMicroelectronics STM32F051C6U6 is an entry-level 32-bit ARM Cortex-M0 microcontroller in the STM32F0 Access Line family, operating at up to 48 MHz and integrating 32 KB of Flash and 4 KB of SRAM, housed in a 48-pin UFQFPN (7x7 mm) package. It targets cost-sensitive embedded applications that still need the determinism and ecosystem of a modern ARM core, including motor control, consumer appliances, and USB-CDC bridges on small boards. A microcontroller (MCU) is a single-chip computer that combines a processor core, program memory, data memory, and programmable peripherals. Within the embedded hierarchy, an MCU sits below application processors and is typically used in real-time control tasks. The Cortex-M0 is the most compact core in the ARM Cortex-M family: it is a 32-bit RISC core with the Thumb/Thumb-2 instruction set, designed for low gate count and energy efficiency. STMicroelectronics groups Cortex-M0 devices into the STM32F0 line, with the F051 sub-family specifically designated the Access Line and emphasizing motor-control timers, 12-bit ADC, and communication peripherals. Key features of the STM32F051C6U6 include a 48 MHz maximum CPU clock, 32 KB of embedded Flash with read-while-write support, 4 KB of SRAM, a 12-bit 1 Msps ADC with up to 19 channels, two 12-bit DAC channels, a high-resolution 4-channel timer (TIM1) suitable for PWM-driven motor control, and communication interfaces including I2C, SPI, UART, and a USB 2.0 Full-Speed device controller. The UFQFPN-48 (7x7 mm) package exposes 39 GPIO, has a 2.0-3.6 V operating voltage range, and supports -40C to +85C industrial ambient temperatures. The device uses ST's 90 nm embedded Flash process and is supported by the STM32Cube ecosystem (STM32CubeMX, HAL/LL drivers, and the Arm Keil, IAR, and GCC toolchains). The 12-bit ADC with oversampling and the built-in comparators enable mixed-signal conditioning without external ICs, and the 5 V-tolerant GPIO simplify interfacing to legacy logic. Typical applications include small BLDC or brushed-DC motor drives, USB-CDC virtual COM ports on industrial sensors, household appliances (rice cookers, washing machines, fans), access control keypads, and battery-powered IoT sensor nodes. Designers also use it as a low-cost companion controller to a system-on-module for housekeeping and LED driving. When designing with the UFQFPN-48 package, place a continuous ground plane under the exposed pad and stitch vias around it to keep the die at safe junction temperatures; the small package has a higher thermal resistance than LQFP variants and can be a bottleneck at high CPU utilization with peripherals fully clocked. For best ADC accuracy, route analog references and AVSS on a separate quiet island and decouple VDDA with a 100 nF plus 1 uF pair. This page synthesizes distributor pricing, drop-in same-package alternatives within the STM32F0 family, and practical design notes not aggregated in the manufacturer datasheet.

Запрос цены Контакты
STM32F051C8T6 - 48MHz 64KB MCU | STMicroelectronics
STM32F051C8T6

STM32F051C8T6 - 48MHz 64KB MCU | STMicroelectronics

The STMicroelectronics STM32F051C8T6 is a 32-bit ARM Cortex-M0 microcontroller operating up to 48 MHz, with 64 KB of Flash memory, 8 KB of SRAM, and 39 I/O pins in a 48-pin LQFP package. The device combines a compact general-purpose microcontroller architecture with embedded Flash, SRAM, communication interfaces, timers, analog conversion functions, and GPIO in one package. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and I/O into a single device. The STM32F051C8T6 belongs to the STM32F0 access-line family, where ARM Cortex-M0 processor cores are used for compact, cost-sensitive embedded control. Its position in the hierarchy is microcontroller → 32-bit microcontroller → ARM Cortex-M0 microcontroller → embedded processor. Verified product information identifies a 48 MHz maximum operating frequency, 64 KB program Flash, 8 KB SRAM, and 39 available I/O functions. These resources are suitable for compact control systems that require real-time peripheral handling without an external memory interface. The 48-pin LQFP package also provides more I/O options than the 32-pin members of the same general family, helping simplify designs that need multiple digital signals, analog channels, or communication connections. The Cortex-M0 core uses a 32-bit RISC architecture and provides a straightforward embedded-processing platform. Its principal advantages are predictable execution, efficient interrupt handling, and broad peripheral integration. Designs must still observe the device's specified supply voltage and pin limits, confirm oscillator and reset arrangements, and provide appropriate decoupling. Peripheral selection should be verified against the exact STM32F051xx datasheet before production release because the supplied distributor summaries do not enumerate every timer channel or alternate-function mapping. Typical uses include compact consumer controls, small industrial controllers, sensor interfaces, communication modules, and general embedded products with moderate Flash and RAM requirements. The 64 KB Flash capacity can store application firmware and boot logic, while 8 KB of SRAM supports working memory, buffers, and protocol state. An external crystal may be required where precise timing or a defined communication clock is needed; otherwise, the internal clock options can simplify the design. Engineers should pay particular attention to firmware compatibility when considering a replacement. A matching package and similar memory capacity do not guarantee identical peripheral behavior, register compatibility, or application-code support. Any substitute should be checked for pin-by-pin electrical differences, startup behavior, flash programming, interrupt mapping, and regulator requirements. The STM32F051C8T6 remains the baseline against which those conditions should be evaluated. This page consolidates verified distributor specifications, source links, practical design guidance, and explicitly qualified replacement information. Unlike a basic distributor listing, it distinguishes confirmed drop-in evidence from broader family comparisons and identifies missing technical data without inventing datasheet values.

Запрос цены Контакты
STM32F051C8T7 - 48MHz Cortex-M0 64KB MCU | STMicroelectronics
STM32F051C8T7

STM32F051C8T7 - 48MHz Cortex-M0 64KB MCU | STMicroelectronics

The STMicroelectronics STM32F051C8T7 is an ARM Cortex-M0 32-bit RISC microcontroller operating at up to 48 MHz, with 64 KB of Flash memory and a 48-LQFP 7 x 7 mm package. It combines a high-performance embedded microcontroller with mixed-signal and timer-driven control resources, including 11 timers, ADC, DAC, and communication interfaces. The operating voltage range is 2.0 V to 3.6 V, making the device suitable for compact 3.3 V embedded systems. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces on one device. The STM32F051 belongs to the STM32F0 access-line family of 32-bit microcontrollers. Its ARM Cortex-M0 architecture provides a compact instruction set for cost-sensitive control applications, while the 48 MHz operating frequency supports responsive digital control and mixed-signal sampling. The 64 KB Flash configuration provides embedded program storage without requiring an external memory device for many control tasks. The principal feature set includes 11 timers, an ADC, a DAC, and communication interfaces covering I2C, SPI, UART/USART, IrDA, LIN, and HDMI-CEC. These resources allow the STM32F051C8T7 to consolidate functions that might otherwise require separate analog, timer, and communication components. The device is therefore particularly relevant to products requiring motor, power, lighting, sensor, communications, or general-purpose embedded control in a 48-pin package. The Cortex-M0 core operates without a cache or pipeline architecture comparable to higher-performance Cortex-M families, favoring simple deterministic control software. Its 32-bit register architecture supports efficient bit manipulation and event-driven firmware, while the integrated analog and timer peripherals reduce external component count. The 2.0 V to 3.6 V supply range also allows the MCU to operate from regulated 3.3 V systems, although detailed current, accuracy, temperature, and electrical timing limits must be confirmed in the manufacturer documentation. Typical applications include LIN-connected automotive accessories, small motor-control modules, digital power converters, LED lighting controllers, industrial sensor nodes, and compact consumer equipment. The combination of a 48-LQFP package, 64 KB Flash, and extensive peripheral set is useful when designers need more integration than an 8-bit or minimal 32-bit controller provides without moving to a larger pin count. Designers should confirm the complete pin assignment and exposed-pad requirements directly from the manufacturer pinout before layout. Decoupling, analog grounding, ADC input conditioning, timer-output routing, and communication signal integrity should be planned around the selected package. Firmware migration from another STM32F0 member should also be reviewed because peripheral availability, memory size, and device-specific options can vary. This page combines verified manufacturer and distributor information with practical design guidance, application fit, and clearly identified data gaps. It also distinguishes verified facts from unconfirmed details so engineers can make sourcing and design decisions without treating unavailable information as a guaranteed specification.

Запрос цены Контакты
STM32F051C8U6 - 48MHz Cortex-M0 64KB MCU | STMicroelectronics
STM32F051C8U6

STM32F051C8U6 - 48MHz Cortex-M0 64KB MCU | STMicroelectronics

The STMicroelectronics STM32F051C8U6 is a 32-bit ARM Cortex-M0 microcontroller operating up to 48 MHz, with 64 KB of Flash memory in a 48-pin UFQFPN 7 x 7 mm package. Its 2.5 V to 3.3 V supply operation and compact exposed-pad package suit cost-sensitive embedded products requiring an Arm-based control architecture, modest code storage, and a low pin-count surface-mount footprint. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, clocking, and peripherals into one package. The STM32F0 family belongs to the MCU hierarchy within embedded semiconductors and combines an Arm Cortex-M0 instruction set with peripheral blocks for digital control. The STM32F051C8U6 is positioned as an entry-level device for applications that need deterministic embedded control without a high-performance Cortex-M processor. The headline specifications are a 48 MHz maximum core frequency, 64 KB of Flash memory, and a 48-UFQFPN package measuring 7 x 7 mm. The STM32F051C8U6 also operates from a 2.5 V to 3.3 V supply. These characteristics make it suitable for compact embedded controllers, sensor-hub products, access-control equipment, industrial interfaces, and low-cost consumer appliances requiring an Arm Cortex-M0 processing core. STMicroelectronics describes the STM32F051xx family as incorporating a high-performance 32-bit RISC Arm Cortex-M0 core. At the family level, the MCU combines embedded Flash, SRAM, GPIO, timers, communication peripherals, and debug support in a small package. The C8 density designation identifies the 64 KB Flash configuration, while the U6 ordering code identifies the UFQFPN package and temperature/packing arrangement used by this exact orderable MPN. Typical implementations include a sensor-conditioning controller, a compact industrial interface, a security or access-control peripheral, a small motor-control controller, and a low-power consumer device. Designers can use the microcontroller to sample inputs, execute control logic, manage timers, and communicate with external sensors or actuators while retaining a small board footprint. The exposed pad also provides a direct thermal path to the PCB when the operating environment or switching activity creates significant self-heating. PCB design should preserve the exposed-pad land pattern, connect it to the appropriate ground reference, and place decoupling capacitors close to the device. Firmware development should follow the STM32CubeMX configuration workflow and the STM32F0 reference materials. Before schematic release, verify every peripheral pin, power-domain connection, boot configuration, and debug interface against the manufacturer pinout and datasheet. This product page combines the exact STM32F051C8U6 ordering information with application guidance, engineering design notes, and a focused comparison of compatible microcontroller options. It is intended to help engineers confirm footprint, memory, core performance, sourcing requirements, and replacement considerations before committing the MCU to a PCB design.

Запрос цены Контакты
STM32F051C8U7 - 48MHz Cortex-M0 MCU 64KB Flash | STMicroelectronics
STM32F051C8U7

STM32F051C8U7 - 48MHz Cortex-M0 MCU 64KB Flash | STMicroelectronics

The STMicroelectronics STM32F051C8U7 is a 32-bit ARM Cortex-M0 mainstream microcontroller from the STM32F0 Access Line, delivering 48 MHz CPU performance with 64 KB of embedded Flash and 8 KB of SRAM in a 48-pin UFQFPN (7x7 mm) package. It integrates a high-speed embedded memory subsystem, an 8-channel 12-bit ADC (1 µs), up to 11 timers including a 16-bit advanced-control PWM timer for motor control, two I²C, two SPI (one I²S), one HDMI CEC, one USB 2.0 FS device, and one CAN 2.0B interface, plus a 5-channel DMA controller and a 4% internal 8 MHz RC oscillator. Operating from 2.0 V to 3.6 V, it is designed for cost-sensitive 8-bit and 16-bit MCU replacement and ultra-low-power applications. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), working memory (SRAM), and configurable peripherals such as ADCs, timers, and communication interfaces. Within the embedded electronics hierarchy, MCUs sit between discrete microprocessors and application-specific standard products (ASSPs); the ARM Cortex-M family spans Cortex-M0/M0+ (smallest, lowest power) up to Cortex-M7 (highest performance). The STM32F0 family specifically targets 8/16-bit replacement, offering 32-bit performance at comparable prices and code density. Key features of the STM32F051C8U7 include: 64 KB Flash / 8 KB SRAM, 1 × 12-bit ADC (1 µs, up to 16 channels), one 16-bit advanced-control timer for motor control, two USART, two I²C (SMBus/PMBus), two SPI (one multiplexed with I²S), HDMI CEC, USB 2.0 FS device, CAN 2.0B, and a 5-channel DMA. The device is offered in LQFP48, UFQFPN48, and WLCSP36 packages; the U7 suffix denotes the UFQFPN48 7×7 mm option. The industrial-grade temperature range is −40 °C to +105 °C. The architecture is a Cortex-M0 core with single-cycle I/O access via a multi-AHB bus matrix, a 4-channel DMA controller, and a low-voltage 1.2 V internal regulator. The 12-bit ADC samples at 1 MSPS with configurable channel-scan and hardware oversampling; the advanced-control timer supports complementary PWM outputs with programmable dead-time, making it ideal for 3-phase motor control. The integrated USB 2.0 FS device and CAN 2.0B peripheral remove the need for external transceivers in many designs. Typical applications include low-cost motor drives (BLDC, PMSM, brushed DC), home appliances and small white goods, USB peripherals and human-interface devices, HVAC controllers, sensor hubs, lighting controls, and 8/16-bit MCU replacement. The combination of CAN, USB, and a 16-bit motor-control timer in a single die makes the STM32F051C8U7 a strong fit for automotive body and chassis modules (non-safety-rated), as well as industrial PLCs and field sensors. When designing with this device, note that the 48-pin UFQFPN package leaves a tighter analog pin budget than the 64-pin LQFP variant - plan your GPIO and peripheral mapping early. The internal 8 MHz RC oscillator is trimmed to ±1% over temperature, but USB and CAN require the external 12 MHz HSE crystal for jitter compliance.

Запрос цены Контакты
STM32F051K4T6 - 48MHz Cortex-M0 16KB Flash MCU | STMicroelectronics
STM32F051K4T6

STM32F051K4T6 - 48MHz Cortex-M0 16KB Flash MCU | STMicroelectronics

The STMicroelectronics STM32F051K4T6 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 16 KB of Flash memory and a 32-pin LQFP package measuring 7 x 7 mm. The device operates from a 2.0 V to 3.6 V supply, making it suitable for compact embedded control, sensor instrumentation, motor-control peripherals, and low-power consumer electronics. Its STM32F0 architecture combines a deterministic RISC core, embedded peripherals, and flexible low-power operation within a small-footprint package. A microcontroller is a semiconductor integrated circuit that integrates a processor core, memory, and peripherals into one device. The STM32F051K4T6 belongs to the STM32F0 family, where the STM32F0 series sits below higher-density STM32 families in processing capacity and I/O density. This device combines an ARM Cortex-M0 processor, Flash program memory, SRAM, general-purpose I/O, timers, serial interfaces, and analog conversion resources on a single integrated circuit. The principal specifications include a 48 MHz maximum core frequency, 16 KB of Flash organized as 16K x 8 bits, and a 32-LQFP 7 x 7 mm package. The listed 2.0 V to 3.6 V operating range supports common 3.3 V embedded systems while allowing lower-voltage operation where component requirements permit. STMicroelectronics identifies the STM32F051xx family as incorporating a high-performance ARM Cortex-M0 32-bit RISC core and 11 timers, making the MCU appropriate for compact control systems requiring multiple timing and communication resources. Technically, the STM32F051K4T6 is designed around a 32-bit RISC instruction set and a maximum clock rate of 48 MHz. Its peripheral mix supports embedded signal acquisition, motor-related control tasks, communications, and general digital control. Because the device is a low- and medium-density member of the STM32F0 platform, designers can use a common ecosystem of development tools while selecting a smaller package than larger STM32 devices. Exact RAM capacity, peripheral ratings, current consumption, and absolute maximum ratings must be confirmed in the manufacturer datasheet before a production design is released. Typical uses include compact motor controllers, building and industrial sensor modules, appliance control boards, communication equipment, and low-cost consumer products. In these systems, the microcontroller can execute control logic, sample analog signals, operate timers, and manage serial data while requiring only a small PCB footprint. A 7 x 7 mm LQFP also remains visually inspectable after soldering and is easier to probe than the very small packages used in space-constrained wearable products. Design decisions should focus on the complete electrical environment rather than the 48 MHz clock alone. Confirm the exact pin functions, decoupling requirements, exposed program and debug access, analog-reference connection, clock configuration, and unused-pin treatment in the manufacturer pinout and reference documentation. The LQFP footprint offers strong mechanical robustness, but every exposed signal still requires deliberate routing to preserve analog accuracy, timing margin, and reliable programming access. This page combines the verified device identity, package information, operating range, engineering applications, drop-in alternatives, and design guidance in a format intended to accelerate component selection. It also highlights which detailed electrical and pin-level values require confirmation from the manufacturer datasheet, helping engineers move directly from source selection to a reviewable embedded design.

Запрос цены Контакты
STM32F051K6T6 - 48MHz Cortex-M0 MCU, 32KB Flash | STMicroelectronics
STM32F051K6T6

STM32F051K6T6 - 48MHz Cortex-M0 MCU, 32KB Flash | STMicroelectronics

The STMicroelectronics STM32F051K6T6 is a 32-bit ARM Cortex-M0 microcontroller operating up to 48 MHz, with 32 KB of Flash memory, in a 32-pin LQFP package. It belongs to the STM32F0 entry-level embedded MCU family and combines a compact RISC core, embedded peripherals, and low-cost control in a surface-mount package. An STM32F0 microcontroller is an embedded-system semiconductor used to execute firmware, read sensors, control actuators, and manage communication interfaces. The STM32F051K6T6 is designed for compact embedded products where a 48 MHz processing rate and 32 KB of program storage are useful without requiring a larger microcontroller. Its 32-LQFP package provides 32 external pins and is suitable for conventional PCB assembly. Verified distributor data identifies the part as an ARM Cortex-M0 STM32F0 microcontroller, 32-bit, 48 MHz, with 32 KB (32K x 8) Flash memory and a 32-LQFP 7 x 7 mm package. The LCSC listing also identifies the device as a 2.5 V/3.3 V, 32-pin LQFP microcontroller. Detailed RAM size, ADC specifications, timers, GPIO count, operating-temperature limits, and package dimensions were not included in the supplied source snippets and therefore require manufacturer datasheet verification. The STM32F051K6T6 can serve as the main controller in sensor nodes, motor-control products, simple industrial equipment, consumer accessories, and low-power embedded control systems. The 48 MHz Cortex-M0 core provides a straightforward software platform, while the STM32F0 family ecosystem supports common embedded development workflows. Firmware selection should confirm the required peripherals, memory use, startup behavior, and toolchain support before production release. For PCB design, use the manufacturer package drawing and pinout for every signal connection. The LQFP footprint requires adequate solderable pad geometry and careful inspection of fine-pitch leads. Decoupling, oscillator routing, programming access, and exposed unused-pin handling should follow the relevant STM32F0 hardware guidance rather than relying solely on distributor summaries. This page combines the verified distributor specifications, official STMicroelectronics product information, commercial availability references, and package-level engineering guidance. It does not infer missing electrical limits or invent cross-brand replacements; unavailable details are marked for data completion so engineers can verify them against the manufacturer datasheet before design release.

Запрос цены Контакты
STM32F051K6T7 - 32KB Flash 48MHz Cortex-M0 MCU 32-LQFP | STMicroelectronics
STM32F051K6T7

STM32F051K6T7 - 32KB Flash 48MHz Cortex-M0 MCU 32-LQFP | STMicroelectronics

The STMicroelectronics STM32F051K6T7 is an entry-level 32-bit ARM Cortex-M0 microcontroller in the STM32F0 access line, integrating up to 32KB of Flash, 8KB of SRAM and a 48MHz CPU core inside a 32-pin LQFP (7x7 mm) package. It targets cost-sensitive industrial control, IoT endpoints, motor control, and low-power metering applications where small footprint and the STM32 ecosystem are decisive. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (typically Flash), working RAM, and a rich set of programmable peripherals onto one silicon die. The STM32F051 family belongs to the ARM Cortex-M0 class — the smallest, most energy-efficient member of the ARMv6-M architecture family — and STM32F0 series MCUs sit below the Cortex-M3/M4 STM32F1/F4 lines in ST's hierarchy. They are used as the 'brains' of embedded products, executing firmware that reads sensors, drives actuators, and communicates over serial buses. Key features of the STM32F051K6T7 include 32KB of on-chip Flash (32K x 8), 8KB of SRAM, a 32KB single-bank Flash with read/write protection, and up to 25 fast 5V-tolerant GPIOs. The 48MHz Cortex-M0 core delivers 0.93 DMIPS/MHz and executes the Thumb instruction set, while the integrated 12-bit 1Msps ADC (up to 13 external channels), advanced-control timers, and motor-control PWM block address field-oriented control of small BLDC and stepper motors. Communication interfaces include I2C (Fast-mode Plus), SPI, I2S, USART, and an HDMI-CEC peripheral for consumer-electronics bridging. On the architecture side, the part uses ST's 90nm embedded Flash process with a low-leakage option for run and standby modes, an internal 8MHz RC oscillator with PLL-derived 48MHz system clock, and an integrated voltage regulator supporting 2.0V–3.6V single-supply operation. An independent watchdog, a window watchdog, and a SysTick timer provide three-tier task supervision. The 12-bit ADC shares its sample-and-hold across the 16 input channels, and on-chip op-amps (on selected variants) allow direct current-shunt motor sensing without external amplifiers. Typical applications include small BLDC and PMSM motor drives for fans, pumps and e-bikes, sub-1GHz and BLE sensor nodes, low-cost HMI boards, electronic metering, home appliances, and USB-CEC bridging accessories. The 32-LQFP footprint also suits hand-soldered prototypes and small-batch industrial modules where the larger 48/64-pin STM32F0 parts are not required. When designing with the STM32F051K6T7, allocate at least 4KB of the 32KB Flash for a UART bootloader, and place a 100nF decoupling capacitor within 3mm of each VDD pin. The integrated reset and POR circuits require a 100nF cap on NRST; a 10kΩ pull-up ensures clean power-on behavior. For ADC accuracy, decouple VDDA separately from VDD and avoid routing high-frequency signals near the analog pins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты