Товары (44.000+)

XA7A35T-1CSG325Q - 33,280-Cell Automotive FPGA | AMD
XA7A35T-1CSG325Q

XA7A35T-1CSG325Q - 33,280-Cell Automotive FPGA | AMD

AMD Xilinx XA7A35T-1CSG325Q is an automotive-grade Artix-7 field-programmable gate array with 33,280 logic cells, 150 user I/O, and a 1 V core supply in a 324-pin CSBGA package. It combines programmable logic, block RAM, DSP resources, and high-speed I/O in a single device, providing a compact platform for automotive control, industrial automation, communications, and embedded instrumentation. A field-programmable gate array is a semiconductor whose digital functions are defined after manufacture through a configuration bitstream. An FPGA belongs to the broader programmable-logic hierarchy, where configurable logic blocks connect through programmable interconnects. Compared with a fixed-function application-specific integrated circuit, an FPGA allows designers to implement parallel control logic, protocols, signal processing, and hardware accelerators while retaining field-update flexibility. The XA7A35T provides 33,280 logic cells and 150 user I/O in a 324-CSBGA package. Its 28 nm process technology supports a compact implementation of control, communication, and data-processing functions. The automotive-oriented XA designation and AEC-Q100 identification distinguish this device from the related commercial Artix-7 XC7A35T. Its pin count supports broad parallel connectivity while keeping the device suitable for space-constrained embedded systems. The -1 speed designation identifies the performance grade within the Artix-7 family. Programming is performed with the AMD/Xilinx FPGA development toolchain and a compatible device configuration interface. Design engineers can implement parallel state machines, bus bridges, sensor fusion logic, communication controllers, and fixed-point signal-processing pipelines. Because the device is reconfigurable, firmware and laboratory configurations can be updated without changing the printed-circuit-board layout. Typical uses include automotive body and chassis electronics, industrial control modules, motor-drive supervisory logic, factory automation, communications gateways, and compact test equipment. The 150 available I/O support interfaces such as SPI, UART, CAN, Ethernet PHY management, parallel sensors, and discrete control signals, while internal programmable logic can perform protocol conversion or real-time filtering. The principal design consideration is BGA assembly. The 324-pin CSBGA requires a multilayer PCB with controlled escape routing, appropriate thermal design, and inspection-based assembly quality. Power, configuration, decoupling, and I/O standards must be designed around the device's operating requirements. Use the pin-description and recommended decoupling tables in the AMD/Xilinx data sheet when assigning balls and planning the power grid. This product page combines device specifications, package information, automotive qualification details, practical application guidance, and a like-for-like comparison with the related XC7A35T. It also identifies the documentation, footprint, qualification, and programming details engineers should confirm before schematic release and PCB layout signoff.

Запрос цены Контакты
XA7A35T-2CPG236I - 33,280-Cell Automotive Artix-7 FPGA | AMD
XA7A35T-2CPG236I

XA7A35T-2CPG236I - 33,280-Cell Automotive Artix-7 FPGA | AMD

The AMD XA7A35T-2CPG236I is an automotive-grade Artix-7 field-programmable gate array with 33,280 logic cells, 106 I/O, 1,843,200 RAM bits, and 90 DSP slices, packaged in a 236-CSBGA. The -2 speed grade targets demanding parallel-processing and control applications, while the XA qualification supports designs requiring AEC-Q100 device options. An FPGA is a reconfigurable semiconductor containing programmable logic blocks, block RAM, digital signal processing resources, and programmable I/O. Within the hierarchy of programmable logic devices, an FPGA sits between simple programmable logic and more complex programmable system-on-chip devices. Its parallel architecture executes multiple control or data-processing operations simultaneously, making it useful for automotive electronics, industrial automation, communications, instrumentation, and embedded systems. The XA7A35T family combines 2,600 logic array blocks with 90 DSP slices and 1,760 Kbits of block RAM. These resources allow designers to implement parallel algorithms, control logic, signal conditioning, communication interfaces, and data acquisition without relying on a fixed internal processor structure. The 106 available I/O support integration with external memory, sensors, transceivers, and automotive communication networks. The device is manufactured on a 28 nm process and carries the -2 performance designation. Its architecture separates general-purpose logic from dedicated DSP and memory resources, allowing design tools to map operations according to timing, resource, and power constraints. Configuration data controls the interconnect and logic implemented after programming, while the surrounding system must provide the correct power rails, configuration interface, clocking, and decoupling. Typical uses include vehicle control modules, sensor-fusion front ends, industrial machine vision, secure communications, test equipment, and embedded data acquisition. The automotive XA designation is particularly relevant when procurement specifications require an automotive qualification path rather than a standard industrial Artix-7 device. A key design requirement is preserving the CPG236 ball-grid footprint and power architecture. Review the AMD package pinout files and UG475 before assigning signals, and validate every board-level power, decoupling, and configuration detail against the manufacturer documentation. Do not substitute an industrial XC device without confirming qualification, temperature, speed-grade, and lifecycle requirements.

Запрос цены Контакты
XA7A35T-2CSG325I - Automotive 28nm Artix-7 FPGA | AMD Xilinx
XA7A35T-2CSG325I

XA7A35T-2CSG325I - Automotive 28nm Artix-7 FPGA | AMD Xilinx

The AMD Xilinx XA7A35T-2CSG325I is an automotive Artix-7 XA field-programmable gate array built on a 28 nm process, with 33,280 programmable logic cells, 150 user I/Os, and a 325-ball CSBGA package. It operates from a 1 V automotive supply and is positioned for systems that require AEC-Q100-qualified programmable logic, integrated processing resources, and a compact surface-mount footprint. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and programmable I/O resources are configured after fabrication. The FPGA category sits above programmable logic devices and supports parallel hardware implementation, real-time signal processing, control, and interface functions. Unlike fixed-function application-specific integrated circuits, an FPGA can be reprogrammed during development and, where system requirements permit, updated in the field. The XA7A35T-2CSG325I combines 33,280 logic cells with 150 user I/Os in a 15 mm-class automotive CSBGA package. Its -2 performance grade supports demanding timing designs, while the automotive XA qualification differentiates it from the commercial XC7A35T family. The device is particularly useful when a project needs programmable control, interface bridging, sensor processing, or parallel logic in an automotive or industrial environment. As an Artix-7 family member, the FPGA integrates configurable logic, block RAM, DSP48E1 processing slices, dedicated clocking resources, and high-speed serial transceivers. These resources allow designers to implement parallel data pipelines and time-critical control logic rather than relying only on a microcontroller. Configuration, bitstream management, clocking, power sequencing, and I/O standards must be validated against the package-specific documentation before schematic capture. Typical uses include automotive gateway and body-control modules, industrial automation controllers, sensor-fusion front ends, motor-control systems, camera and display interfaces, and communication equipment requiring deterministic parallel processing. The 150 available I/Os support board-level interconnects, while DSP and block-RAM resources support filtering, waveform generation, and protocol acceleration. The principal design consideration is power and signal integrity. A 1 V core supply demands careful rail sequencing and decoupling, and the dense CSBGA package requires a mechanically stable PCB with controlled escape routing. Differential interfaces and high-speed transceivers should follow the package-specific layout guidance, including continuous return paths and properly modeled reference planes. This product overview combines the automotive Artix-7 positioning, 28 nm implementation, 33,280 logic cells, 150 I/Os, and 325-ball package information with practical guidance for qualification, layout, clocking, power delivery, and drop-in-family selection.

Запрос цены Контакты
XA7A50T-1CPG236Q Artix-7 FPGA 52K | AMD | Industrial
XA7A50T-1CPG236Q

XA7A50T-1CPG236Q Artix-7 FPGA 52K | AMD | Industrial

The AMD XA7A50T-1CPG236Q is an Artix-7 XA FPGA with 52,160 logic cells, 106 user I/O, and a 238-CSBGA package. It uses 28 nm FPGA technology and is identified as a 1 V device with a speed grade of -1. The device is positioned for compact, low-power programmable-logic designs where high logic density, integrated programmable resources, and a small board footprint are more important than the very high performance available from larger FPGA families. An FPGA is a programmable-logic semiconductor whose internal lookup tables, routing, block RAM, DSP blocks, and I/O can be configured after manufacture. The XA7A50T belongs to the Artix-7 product line, which is positioned below higher-density and higher-power families for cost-conscious embedded applications. The XA designation also identifies a variant with a distinct set of device resources and electrical characteristics, so designers should use the XA7A50T documentation rather than assume every XC7A50T feature is identical. Key specifications include 52,160 programmable logic cells, 106 I/O, 28 nm process technology, and a 236-ball CSPBGA package. The available product listing identifies the device as a 1 V Artix-7 XA FPGA. These figures make it useful for protocol bridges, embedded control logic, industrial instrumentation, camera or image-processing front ends, and general-purpose accelerator designs. The large number of I/O supports parallel interfaces, while the logic-cell count allows substantial datapath and state-machine integration on one device. The XA7A50T-1CPG236Q is the part-number form containing the device family, speed grade, package identifier, and temperature or qualification suffix. The -1 suffix indicates the -1 speed grade, CPG236 denotes the 236-ball CSPBGA package, and the final Q suffix identifies the specified temperature/qualification option. Exact operating temperature, I/O standards, memory quantities, configuration interface details, and timing limits should be confirmed in the manufacturer datasheet for the specific ordering code. The principal design consideration is PCB complexity. A 238-CSBGA device requires a fine-pitch land pattern, careful escape routing, multilayer construction, and assembly process control. Power rails, configuration signals, clock inputs, and high-speed I/O require deliberate partitioning. The device should be placed using the manufacturer package drawing and evaluated with the intended Vivado implementation flow rather than inferred from a generic BGA symbol. This product page synthesizes the device identity, package information, sourcing details, drop-in alternatives, and practical FPGA design guidance. It is intended to help engineers quickly confirm whether the XA7A50T-1CPG236Q matches the required logic density, I/O count, package, technology, and application before requesting a quote or beginning layout.

Запрос цены Контакты
XA7A50T-1CSG324I - 52K Logic Cell FPGA, 210 I/O | AMD
XA7A50T-1CSG324I

XA7A50T-1CSG324I - 52K Logic Cell FPGA, 210 I/O | AMD

AMD XA7A50T-1CSG324I is an automotive-grade Artix-7 field-programmable gate array with 52,160 logic cells, 210 I/O, and a 324-LFBGA CSPBGA package. It combines programmable logic, block RAM, digital signal processing resources, and programmable I/O in a single device for automotive, industrial, communications, and embedded control systems. The -1 portion denotes the device speed grade, while the CSG324 suffix identifies the 324-ball package configuration and I suffix identifies the industrial temperature range. A field-programmable gate array is a semiconductor device whose digital logic and interconnect can be configured after manufacture. An FPGA sits above programmable logic devices in the hardware hierarchy and provides higher parallelism than a microcontroller or fixed-function logic array. The Artix-7 family is positioned between low-cost CPLDs and larger programmable-logic devices, combining substantial logic density with relatively low static power consumption and fast I/O performance. The device's principal resources include 52,160 logic cells, 210 user I/O, 276,480 flip-flops, and 104,320 lookup tables. These figures allow designers to implement parallel data paths, protocol bridges, control logic, signal processing, and interface aggregation within one package. The -1 speed grade supports demanding timing budgets, while the industrial temperature designation is intended for systems operating beyond commercial-temperature conditions. The CSG324 package provides 324 physical balls in a compact surface-mount land pattern. Because the design includes high-speed I/O and a large number of connections, PCB layout must follow AMD's package pinout files and Artix-7 design guidance. Power, decoupling, clocking, configuration access, and JTAG connectivity all require deliberate planning rather than generic FPGA layout assumptions. Typical applications include automotive infotainment and gateway controllers, industrial instrumentation, motor and motion-control systems, communications equipment, test systems, and embedded vision platforms. The combination of 210 I/O and 52,160 logic cells is particularly useful where several external interfaces and concurrent control tasks must coexist in one programmable device. For new hardware, validate the exact pin assignments, configuration scheme, supported I/O standards, clock tolerances, and power sequencing against the AMD Artix-7 documentation. In particular, use the official CSG324 package files when assigning ball locations and PCB layers, and verify every high-speed interface against the selected board's signal-integrity requirements. This page consolidates the key device identity, package information, sourcing details, comparison points, and engineering guidance needed to evaluate the XA7A50T-1CSG324I. It also distinguishes direct package-level choices from the industrial and automotive members of the related Artix-7 family so that qualification and replacement decisions can be made against package, speed, and temperature requirements.

Запрос цены Контакты
XA7A50T-1CSG324Q - 52,160-LC Automotive Artix-7 FPGA | AMD
XA7A50T-1CSG324Q

XA7A50T-1CSG324Q - 52,160-LC Automotive Artix-7 FPGA | AMD

The AMD XA7A50T-1CSG324Q is an automotive-grade Artix-7 XA field-programmable gate array with 52,160 logic cells, 210 user I/Os, and a 1.0 V core supply, housed in a 324-ball CSBGA package measuring 15 x 15 mm. It combines 2,764,800 block-RAM bits, 120 DSP48E1 slices, and four GTP transceivers for compact automotive and industrial control systems. An FPGA is a programmable semiconductor whose configurable logic blocks, block RAM, DSP resources, and I/O blocks can be interconnected to implement digital systems. Within the device hierarchy, this component belongs to the FPGA and CPLD category and uses a parallel programmable architecture rather than a fixed instruction set. Its configuration logic allows the same hardware to implement control, communication, signal processing, or interface functions. The XA7A50T-1CSG324Q provides a -1 speed grade, 8,150 configurable logic blocks, and 52,160 logic cells. Its 1.0 V core supply is supplemented by 1.8 V, 2.5 V, and 3.3 V I/O capability. Automotive qualification extends its suitability for demanding vehicle electronics, while the extended -40°C to +125°C operating range addresses temperature extremes commonly encountered in vehicle environments. The device includes 120 DSP48E1 slices, enabling parallel arithmetic and fixed-point signal-processing pipelines without relying on external accelerators. Four GTP transceivers provide high-speed serial capability for communication links. The 324-ball CSBGA package supports dense board integration, but its fine pitch requires careful power distribution, escape routing, thermal analysis, and assembly planning. Typical applications include automotive body and chassis controllers, sensor-fusion preprocessing, industrial automation equipment, low-cost instrument interfaces, and compact communication gateways. In each case, the programmable architecture allows field updates and hardware reuse while providing enough DSP, RAM, and serial I/O resources for real-time control. Designers should separate core and I/O supplies, place decoupling capacitors according to the manufacturer's recommended power architecture, and validate high-speed transceiver layouts against the relevant Artix-7 guidance. Because the CSBGA package concentrates 324 contacts on a 15 x 15 mm area, PCB stack-up, via-in-pad treatment, solder-mask design, and assembly capability directly affect yield. This product page combines the identified electrical and packaging characteristics, package-level replacement considerations, design guidance, and application engineering context to support faster component selection and PCB planning.

Запрос цены Контакты
XA7A50T-1CSG325I - Automotive Artix-7 FPGA | AMD
XA7A50T-1CSG325I

XA7A50T-1CSG325I - Automotive Artix-7 FPGA | AMD

The AMD XA7A50T-1CSG325I is an automotive-grade Artix-7 XA field-programmable gate array with 52,160 logic cells, 2,764,800 RAM bits, 150 user I/O, and a 324-CSPBGA package. It uses 28 nm FPGA technology and is built for automotive and industrial systems that require deterministic programmable logic, parallel processing resources, and a high pin count in a compact surface-mount package. An FPGA is a reprogrammable semiconductor containing configurable logic blocks, block RAM, programmable input/output resources, and dedicated processing resources. In the device hierarchy, the XA7A50T belongs to the Artix-7 FPGA family, combines with the XA automotive product line, and is ultimately classified as a programmable logic semiconductor. This positioning supports compact control, sensor aggregation, communication bridging, and video or image-processing functions without relying on a fixed application-specific ASIC. Key device attributes include 52,160 logic elements, 4,075 available logic cells or configurable logic blocks, and 2,764,800 total RAM bits. The device provides 150 user I/O for parallel sensor, actuator, camera, control, and communications interfaces. Its 28 nm process technology and 324-CSPBGA package provide a balance of logic capacity, I/O availability, board density, and power-conscious performance for mid-range embedded systems. The -1 suffix denotes the device speed grade, while the CSG325I ordering code identifies the 324-ball chip-scale BGA package and the industrial temperature designation. Because the device uses a large BGA footprint, its electrical and mechanical design depends on careful PCB stack-up, power delivery, via-in-pad construction, and BGA assembly requirements. The manufacturer package-pinout resources should be used when assigning every ball and power-plane connection. Typical applications include automotive body and chassis control modules, sensor-fusion preprocessing, industrial vision front ends, CAN or Ethernet interface concentrators, motor-control prototyping, and compact communication gateways. The 150 I/O count is particularly useful when a design must connect multiple sensors, actuator drivers, high-speed interfaces, or parallel data sources while keeping the FPGA footprint compact. The primary design trade-off is thermal and assembly complexity. A 324-CSPBGA device concentrates substantial I/O and logic in a small area, but it also demands dense power and ground distribution, careful via placement, and thermal-aware floorplanning. Validate the selected speed and temperature grades against the automotive qualification, EMC, and environmental requirements of the end system. This page consolidates part-specific resource counts, package information, ordering-code details, drop-in alternatives, and practical PCB considerations to help engineers qualify the XA7A50T-1CSG325I for a new design without relying solely on generic Artix-7 guidance.

Запрос цены Контакты
XA7A50T-1CSG325Q - Automotive Artix-7 FPGA, 52K LC | AMD
XA7A50T-1CSG325Q

XA7A50T-1CSG325Q - Automotive Artix-7 FPGA, 52K LC | AMD

The AMD XA7A50T-1CSG325Q is an automotive-grade Artix-7 XA Field Programmable Gate Array (FPGA) IC delivering 52,160 logic cells, 150 user I/O, and 2,764,800 system gates in a 324-ball LFBGA (CSPBGA) package. The "XA" prefix designates AMD's automotive-qualified Artix-7 family, qualified per AEC-Q100 for harsh-environment deployments, while the "-1" speed grade and "Q" suffix denote the standard temperature tier with automotive qualification. The device is fabricated on a 28nm high-k metal-gate (HKMG) low-power process, balancing performance-per-watt with cost-effectiveness for volume automotive and industrial designs. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit composed of configurable logic blocks (CLBs), programmable interconnect, and dedicated silicon IP blocks such as transceivers, block RAM, and DSP slices. Within the broader programmable logic hierarchy, the Artix-7 family sits at the low-power, cost-optimized tier below Kintex-7 and Virtex-7, targeting high-volume, power-sensitive applications. The XA7A50T occupies the mid-density position in the XA Artix-7 lineup and is engineered to replace discrete ASICs and ASSPs in automotive driver assistance, infotainment, and industrial control systems. Key features include 2,764,800 system gates, 52,160 logic cells, 2,700 Kbits of block RAM distributed across 75 36-Kbit BRAMs, 120 DSP48 slices for fixed- and floating-point arithmetic, and 4 GTP transceivers capable of up to 6.6 Gb/s line rate. The fabric supports clock management tiles (CMTs) for high-precision frequency synthesis, with up to 64 I/O standards including LVDS, HSTL, SSTL, and 1.5V/1.8V/2.5V/3.3V LVCMOS. Programmable logic resources are accompanied by an integrated configuration controller that supports master/slave SelectMAP, JTAG, and SPI flash boot modes. Architecturally, the device leverages 6-input LUTs for logic optimization and dedicated carry chains for high-speed arithmetic. The XA qualification adds extended temperature testing, PPAP documentation, and longevity support matching automotive program lifecycles. Power is managed through a dedicated core voltage rail (1.0V VCCINT) and separate I/O bank supplies (VCCO), enabling mixed-voltage interfacing on a single die. Typical applications include automotive driver assistance (ADAS) sensor fusion, surround-view camera processing, vehicle networking gateways, industrial motor control, factory automation, and portable medical imaging. The wide operating temperature and automotive qualification make it particularly suited for under-hood ECUs and zonal architectures. When designing with the XA7A50T-1CSG325Q, follow AMD's Kintex/Artix-7 PCB layout guidelines for power decoupling — at least 24 low-ESL 0.1µF capacitors around the BGA, plus bulk 47–100µF ceramic on each power rail. The 324-LFBGA requires microvia or via-in-pad PCB technology for reliable assembly. This page synthesizes distributor pricing, AEC-Q100 automotive qualification details, drop-in Artix-7 alternatives, and PCB design guidance not aggregated in the manufacturer datasheet.

Запрос цены Контакты
XA7A50T-2CPG236I - 50T Artix-7 XA FPGA | AMD
XA7A50T-2CPG236I

XA7A50T-2CPG236I - 50T Artix-7 XA FPGA | AMD

AMD XA7A50T-2CPG236I is an Artix-7 XA field-programmable gate array with 106 I/Os, a 1.05 V maximum core supply, and a maximum clock frequency of 1286 MHz, housed in a 238-CSBGA package. The device combines programmable logic, dedicated input/output resources, and embedded memory in a surface-mount package designed for industrial and high-reliability electronic systems. An FPGA is a semiconductor whose digital logic can be configured after manufacture. It belongs to the programmable-logic hierarchy and can implement parallel processing, control, communications, signal conditioning, and interface functions. The Artix-7 XA family targets applications requiring adaptive logic, high I/O density, and efficient performance without the resources of a larger FPGA. The XA7A50T designation identifies a 50,000-class Artix-7 XA device, while the -2 suffix identifies its performance grade. Key characteristics include 106 inputs and 106 outputs, a nominal 1 V core supply, a permitted supply range of 0.95 V to 1.05 V, and operation up to a 1286 MHz maximum clock frequency. These parameters suit designs requiring multiple high-speed parallel paths and deterministic digital control. The FPGA architecture permits hardware functions to be mapped directly into parallel logic rather than executed sequentially by a general-purpose processor. This can reduce external component count, shorten data paths, and consolidate protocol, acquisition, and control functions in one device. Because a CSPBGA package requires careful escape routing and power distribution, the board design must include the device-specific pinout and reference design guidance from AMD/Xilinx. Typical applications include industrial automation, data acquisition, communications infrastructure, test and measurement, embedded control, and high-speed signal processing. The 106 I/Os are particularly useful for parallel sensor interfaces, digital control buses, memory interfaces, and multiple low-speed communication channels. The -2 performance grade and XA family positioning make the device appropriate for designs requiring a balance of logic capacity, I/O access, and operating reliability. Power delivery is a central design consideration for this 1.05 V maximum-core-supply device. The PCB should provide clean, low-impedance connections to every power terminal and adequate decoupling close to the package. Signal-integrity practices should also be applied to high-speed interfaces, with return paths, reference planes, and connector transitions considered together. This product summary combines the key electrical, packaging, sourcing, replacement, and design information engineers need to evaluate the XA7A50T-2CPG236I. It also highlights pinout and lifecycle checks that should be completed against the manufacturer datasheet before schematic capture, PCB layout, or production release.

Запрос цены Контакты
XA7A50T-2CSG324I - 210-I/O Automotive Artix-7 FPGA | AMD
XA7A50T-2CSG324I

XA7A50T-2CSG324I - 210-I/O Automotive Artix-7 FPGA | AMD

The AMD XA7A50T-2CSG324I is an automotive-grade Artix-7 XA field-programmable gate array with 210 user I/O, supplied in a 324-LFBGA CSPBGA package. It uses the -2 speed grade and is identified for automotive applications with AEC-Q100 qualification. The device combines programmable logic, configurable I/O, and embedded memory resources in a single surface-mount package, making it suitable for compact embedded systems requiring deterministic programmable control and high I/O density. A field-programmable gate array is a programmable-logic semiconductor in which digital functions are configured through a programmable bitstream rather than fixed mask design. Within the product hierarchy, the XA7A50T belongs to the Artix-7 XA FPGA family and combines a high-volume FPGA architecture with automotive qualification. Its 210-I/O interface provides substantial connectivity for external memories, communication controllers, sensors, actuators, and general-purpose digital control. The primary distinguishing features of the XA7A50T-2CSG324I are its 210 available I/O positions, -2 performance grade, and 324-LFBGA package. The large ball-grid interface supports dense board routing while keeping the component compact for industrial and vehicle electronic modules. The automotive XA positioning adds qualification-oriented reliability requirements, making the device more appropriate for sustained automotive use than the commercial XC7A50T family. Architecturally, an FPGA fabric contains programmable logic blocks, programmable input/output resources, and memory structures connected by an internal routing network. Design engineers configure these resources to implement control logic, protocol bridges, data acquisition paths, or general parallel processing. Because configuration logic determines the implemented circuit, the same physical FPGA can support multiple firmware or bitstream configurations across a product family, subject to the device's documented resources and constraints. Typical uses include automotive body and chassis electronics, industrial controllers, sensor aggregation modules, industrial communication gateways, and compact embedded control platforms. The 210-I/O count is particularly useful when a design must connect several peripheral buses, high-speed parallel interfaces, or discrete input and output groups without moving to a larger package. The automotive qualification also makes this part a natural candidate for vehicle electronics requiring a documented reliability basis. PCB implementation requires careful power planning, decoupling, signal integrity, and exposed-pad heat removal where applicable. Designers should use the AMD package pinout files and UG475 package information to assign balls, confirm voltage domains, and plan high-speed routing. The power architecture should provide the required rails with local bulk and high-frequency decoupling close to the device. This product page combines exact ordering information, package and I/O details, automotive qualification context, replacement analysis, comparison parameters, and practical implementation guidance. It also distinguishes true same-footprint alternatives from broader Artix-7 devices that may require different packages or qualification, helping engineers narrow replacement choices without confusing functional similarity with drop-in compatibility.

Запрос цены Контакты
XA7A50T-2CSG325I - 52,160-Cell Automotive Artix-7 FPGA | AMD
XA7A50T-2CSG325I

XA7A50T-2CSG325I - 52,160-Cell Automotive Artix-7 FPGA | AMD

The AMD XA7A50T-2CSG325I is an automotive-grade Artix-7 field-programmable gate array with 52,160 logic cells, 4,075 configurable logic blocks, and a maximum stated frequency of 1,286 MHz. It is packaged in a 324-ball CSPBGA measuring 15 mm by 15 mm with a 0.80 mm ball pitch and is manufactured in CMOS technology. The device provides 150 user I/O and 2,764,800 RAM bits for programmable logic, fixed logic, block RAM, and signal-processing designs. A field-programmable gate array is a semiconductor device whose digital functionality is defined after fabrication through a configuration bitstream. Within the product hierarchy, an FPGA is a programmable logic device, while the Artix-7 family combines configurable logic blocks, programmable I/O, block RAM, DSP resources, and dedicated clock-management resources. This integration allows designers to implement parallel control, communication, signal processing, and interface functions on one device instead of combining multiple fixed-function components. The XA series identifies the automotive-oriented Artix-7 offering. According to the manufacturer datasheet information, the XA7A50T-2CSG325I is AEC-Q100 qualified and supports 150 I/O, 52,160 logic cells, and 4,075 CLBs. Its 2,764,800 RAM bits provide distributed and block-storage resources, while the -2 speed designation identifies the device grade. The lead-free 324-ball package also supports the compact board layouts commonly required by automotive electronic control units. Technically, the device is organized around programmable logic fabric and dedicated hard resources. Each configurable logic block supports general Boolean and sequential logic, while block RAM stores larger data buffers and DSP resources accelerate arithmetic-heavy operations. The listed 1,286 MHz value describes the device's maximum stated operating frequency; practical designs still depend on the selected clock, routing, logic depth, I/O standard, timing constraints, and implemented architecture. Configuration and programming are handled through the family's established FPGA tool flow. Typical applications include automotive body and comfort controllers, motor and power-control electronics, industrial automation, camera and image-processing systems, communications infrastructure, and embedded test equipment. The 52,160-cell capacity is suitable for moderately complex control planes, while 150 I/O and dedicated memory allow simultaneous external interfaces and real-time data pipelines. The AEC-Q100 qualification makes the XA designation especially relevant where automotive reliability requirements drive component selection. The main design consideration is that the 324-ball CSPBGA requires careful escape routing, multilayer PCB construction, controlled impedance, and a thermal strategy appropriate for the expected ambient and junction temperatures. Power sequencing, configuration control, bank deassertion, I/O standards, and unused-ball treatment should follow the manufacturer pinout and configuration guidance. A drop-in decision must also account for speed grade, temperature grade, qualification, and bitstream compatibility. This page combines exact ordering information, package characteristics, automotive qualification, practical FPGA design guidance, and same-family drop-in candidates for engineering evaluation. It also distinguishes meaningful substitutions from changes that require a different package, pinout, qualification status, or device configuration.

Запрос цены Контакты
XA7A75T-1CSG324Q - Automotive Artix-7 FPGA | AMD
XA7A75T-1CSG324Q

XA7A75T-1CSG324Q - Automotive Artix-7 FPGA | AMD

The AMD XA7A75T-1CSG324Q is an automotive-grade Artix-7 XA field-programmable gate array with 210 I/O, a 1098 MHz maximum clock frequency, and a 324-terminal 15 x 15 mm S-PBGA package with 0.80 mm ball pitch. Designed for programmable logic in demanding vehicle electronics, it combines configurable logic resources, programmable I/O, and an extended -40°C to 125°C operating range with AEC-Q100 compliance. The CSG324 package supports dense, compact integration on advanced automotive circuit boards. An FPGA is a programmable semiconductor whose logic blocks, I/O, memory, and clock resources can be configured after manufacture. It sits within the programmable-logic hierarchy as a field-programmable gate array, alongside CPLDs and other programmable-logic devices. Unlike a fixed-function application-specific integrated circuit, an FPGA allows designers to implement parallel data paths, control logic, protocol bridges, sensor fusion, and hardware accelerators while retaining the flexibility to revise functionality through configuration updates. The XA7A75T-1CSG324Q combines 210 inputs with 210 outputs and a maximum clock frequency of 1098 MHz. Its 324-terminal S-PBGA arrangement provides a high pin count in a 15 x 15 mm surface-mount package. The 0.80 mm ball pitch creates a demanding but standardized land pattern that requires careful ball-placement review, fine-pitch PCB construction, and assembly-process control. Its -40°C to 125°C rating and AEC-Q100 compliance align it with automotive temperature and quality requirements. The Artix-7 XA architecture is intended for compact, low-power programmable systems where higher-end FPGA resources would add unnecessary size, power, or complexity. At the device level, maximum clock capability describes the highest characterized operating condition rather than the frequency at which every user design can run. Actual timing performance depends on the selected clock, resource utilization, I/O standards, routing, voltage, and timing constraints in the completed design. Typical automotive uses include advanced driver-assistance electronics, sensor-processing and fusion nodes, infotainment control, vehicle networking, camera and radar interfaces, gateway logic, and centralized electrical systems. The combination of automotive qualification, broad temperature support, configurable parallel logic, and a 210-I/O interface is useful when a system requires deterministic hardware behavior and design flexibility without a larger application-specific ASIC. For PCB implementation, use the AMD Artix-7 package pinout files and the device-specific schematic and layout guidance before assigning power, ground, configuration, clock, and I/O pins. Treat the 324-ball footprint as a high-density BGA assembly and validate escape routing, via-in-pad strategy, solder-mask design, reflow profile, and continuity testing. Confirm the selected configuration bitstream against the exact device revision before production programming. This product record combines the XA7A75T-1CSG324Q electrical identity, package characteristics, application guidance, qualified comparison options, and practical implementation notes. It is intended to help engineers evaluate the device quickly while still using the AMD datasheet, UG475 package guidance, and official package pinout files for design release.

Запрос цены Контакты
XA7A75T-1FGG484I - Automotive Artix-7 FPGA | AMD
XA7A75T-1FGG484I

XA7A75T-1FGG484I - Automotive Artix-7 FPGA | AMD

AMD XA7A75T-1FGG484I is an automotive Artix-7 field-programmable gate array in a 484-ball BGA package, combining 76,800 logic cells, 38,707,200 flip-flops, and 285 configurable I/O pins. The device is built for automotive electronics requiring a qualified FPGA platform, high logic density, and a broad set of programmable I/O resources. An FPGA is a programmable semiconductor in the broader semiconductor and digital-logic hierarchy. Unlike fixed-function logic, an FPGA allows engineers to configure parallel processing, serial interfaces, memory controllers, and custom digital functions after manufacturing. The Artix-7 family balances programmable logic density with low-power operation and is suitable for industrial, communications, automotive, and embedded-control systems. The XA7A75T-1FGG484I identifies the A75T Artix-7 device, -1 speed grade, FGG484 package, and industrial temperature designation. Available device information identifies 5,900 configurable logic blocks, 75,520 logic cells, 38,707,200 flip-flops, and 285 I/O pins. Its 484-BBGA construction supports dense board-level integration and high-speed routing between programmable logic and external circuitry. Artix-7 devices use configurable logic blocks, block RAM, digital signal processing resources, programmable I/O, and dedicated clocking and configuration resources. This architecture supports parallel image processing, sensor fusion, industrial control, vehicle information systems, communications gateways, and embedded instrumentation. Automotive qualification makes the XA7A75T family particularly relevant to systems where component qualification and long-term product consistency are important design constraints. Typical automotive uses include camera and radar signal processing, vehicle networking, body-electronics control, driver-assistance electronics, and centralized compute nodes. The device can also support industrial automation, communications infrastructure, test equipment, and embedded control applications when its I/O count and logic capacity match the design requirements. A complete design must include the appropriate configuration memory, clocking, decoupling, power sequencing, and signal-integrity implementation. For PCB implementation, follow AMD’s Artix-7 package pinout files and device guidance when assigning the 484 balls. The BGA footprint requires dense escape routing and careful layer planning, while power and ground distribution must provide low-impedance paths across the device. Configuration pins, speed-grade-dependent timing limits, and automotive qualification requirements should be checked against the manufacturer documentation before release. This product record combines the manufacturer-family specifications, exact package identification, source pricing links, qualified cross-reference candidates, application guidance, and practical PCB considerations needed to evaluate the XA7A75T-1FGG484I for an automotive FPGA design.

Запрос цены Контакты
XA7A75T-1FGG484Q - 75,520-Cell 28nm Automotive FPGA | AMD
XA7A75T-1FGG484Q

XA7A75T-1FGG484Q - 75,520-Cell 28nm Automotive FPGA | AMD

AMD XA7A75T-1FGG484Q is an automotive-grade Artix-7 field-programmable gate array with 75,520 logic cells, a 28nm High-K Metal Gate process, and a 484-terminal FBGA package measuring 23 x 23 mm. It operates from a 1 V core supply over a -40°C to +125°C temperature range and is qualified to AEC-Q100 standards. An FPGA is a programmable semiconductor whose configurable logic, digital signal processing, block RAM, clocking, and I/O resources can be tailored after manufacture. Within the product hierarchy, the XA7A75T belongs to the Artix-7 FPGA family and combines a 28nm programmable logic fabric with automotive-grade environmental qualification. This makes it suitable for control, monitoring, communications, and data-processing systems requiring deterministic hardware behavior and long-life automotive qualification. The 75,520-cell fabric provides substantial parallel processing capacity for control algorithms, protocol handling, and sensor fusion. The -1 speed designation identifies its performance grade within the XA7A75T family, while the FGG484 package provides 484 terminals for power, configuration, clock, and user I/O connections. The 1 V core supply and 28nm process support a modern, power-conscious implementation of multi-channel digital logic. Automotive qualification broadens the operating envelope beyond ordinary commercial FPGAs. The published -40°C to +125°C range covers extended environmental conditions encountered in vehicle electronics. Programmable logic is particularly useful where several functions, timing relationships, and diagnostic paths must be maintained with high repeatability while allowing field updates to the FPGA configuration. Typical applications include automotive body and chassis control, motor and pump control, sensor conditioning, vehicle-network gateways, radar or camera interface preprocessing, instrumentation, and industrial control systems. The same device family can implement parallel control logic, protocol conversion, fault monitoring, and local data reduction without relying on multiple discrete controllers for each function. PCB implementation requires careful BGA fanout, continuous power-plane distribution, decoupled supply rails, and signal-integrity-conscious routing. AMD package pinout and UG475 package files should be used to assign every ball, including power, configuration, clock, and I/O functions. Configuration storage, clocking, and bank-specific voltage requirements must be planned before schematic and layout signoff. This product page combines the manufacturer specifications, verified commercial availability, pin-compatible family alternatives, and application-specific engineering guidance. It supports part identification, replacement planning, and board-level design decisions while directing detailed pin assignments and configuration requirements to the AMD Artix-7 documentation.

Запрос цены Контакты
XA7A75T-2CSG324I - Automotive Artix-7 FPGA | AMD
XA7A75T-2CSG324I

XA7A75T-2CSG324I - Automotive Artix-7 FPGA | AMD

AMD XA7A75T-2CSG324I is an automotive-grade Artix-7 field-programmable gate array in a 324-terminal LFBGA package, with 210 I/O, 75,520 logic cells, and a 387,072-bit fabric presented in the verified distributor data. The device combines programmable logic, fixed resources, and automotive-oriented temperature grading in a 28 nm FPGA platform. Its -2 speed grade favors performance over the -1 grade, while the XA prefix identifies the automotive Artix-7 family. An FPGA is a semiconductor whose digital function is configured after manufacture. A field-programmable gate array belongs to the broader logic-device hierarchy: FPGA, programmable-logic IC, digital semiconductor, and embedded computing component. Instead of relying solely on fixed application-specific logic, an FPGA integrates configurable lookup logic, programmable routing, block resources, memory, and I/O into one reconfigurable device. Verified listings identify 210 I/O, 75,520 logic cells, and 387,072 fabric bits. The searchable Artix-7 product page states that the family uses a 28 nm process and targets high performance per watt. Additional performance figures such as clock rate, block-RAM capacity, DSP resources, power, and temperature limits were not supplied in the verified input and therefore are not inferred here. The 324-LFBGA package supports dense PCB integration but requires exact land-pattern, ball-map, and assembly-process control. Verified distributor data separately describes the package as 324-LFBGA or CSPBGA. AMD publishes package pinout files in TXT and CSV formats, giving engineers the authoritative ball assignments needed for PCB and design-signoff work. Potential uses include automotive sensing, vehicle communication, industrial image processing, embedded control, and high-throughput digital logic. Suitability depends on the complete AMD Artix-7 datasheet, selected tools, automotive qualification requirements, temperature grade, resource utilization, timing closure, and system power budget. A robust design should begin with the AMD package-pinout files, preserve all required power and configuration pins, and constrain every interface against the appropriate device-speed and automotive qualification constraints. Use Vivado or another AMD-supported implementation flow for constraints, synthesis, implementation, timing analysis, and bitstream generation. This page consolidates verified distributor identity, package, resource, and sourcing data with replacement analysis and implementation guidance. It does not infer unprovided electrical ratings, pricing, stock status, or full ball assignments; those fields remain explicitly separated from verified facts.

Запрос цены Контакты
XA7A75T-2FGG484I - Automotive Artix-7 FPGA | AMD
XA7A75T-2FGG484I

XA7A75T-2FGG484I - Automotive Artix-7 FPGA | AMD

The AMD XA7A75T-2FGG484I is an automotive-grade Artix-7 field-programmable gate array built on a 28 nm process, with 75,520 logic cells, 285 I/O pins, and a 484-ball BGA package using a 1 mm ball pitch. It combines programmable digital logic, embedded memory resources, and high-speed I/O in a single surface-mount device. A field-programmable gate array, or FPGA, is a programmable digital semiconductor whose interconnect and logic blocks can be configured after manufacture. FPGAs occupy the programmable-logic segment of the semiconductor hierarchy and are used when design flexibility, parallel processing, specialized interfaces, or rapid product revisions are more important than the power efficiency of a fixed-function ASIC. The XA7A75T family is positioned between small low-cost FPGAs and larger devices with more logic, memory, and I/O resources. Key features of the XA7A75T-2FGG484I include 75,520 logic cells, 285 user I/O pins, and operation from a 1 V core supply. The FGG484 package contains 484 terminals in a compact BGA arrangement with 1 mm pitch. The XA designation identifies the automotive-oriented XA Artix-7 family, and the part is identified as AEC-Q100 compliant in the manufacturer-related product information. The -2 speed designation places this device in the middle performance grade of the XA7A75T family. Its 28 nm fabrication process supports a balance between programmable performance and power efficiency, while its large I/O count allows connections to external memory, communication transceivers, sensors, actuators, and mixed-signal peripherals. These characteristics make the device suitable for embedded control, gateway, instrumentation, and vehicle electronics systems that benefit from parallel programmable logic. Typical automotive applications include sensor fusion, camera and radar signal preprocessing, vehicle-network interfaces, body and chassis control, industrial communications gateways, and high-reliability data-acquisition systems. The same programmable architecture allows one physical design to support several protocol or sensor configurations, reducing hardware duplication and allowing field updates through the device configuration mechanism. PCB design requires careful treatment of the 484-ball BGA footprint. Follow the AMD Artix-7 package pinout files, UG475, and the PCB design guidance for escape routing, via placement, power-plane geometry, and decoupling. Confirm the exact pin functions, configuration pins, power rails, and decoupling requirements against the manufacturer datasheet before releasing the layout. This page organizes the confirmed device identity, package information, functional characteristics, design considerations, and qualified replacement options. It also provides application-focused guidance and parameter comparisons intended to help engineers evaluate the XA7A75T-2FGG484I before starting PCB implementation or lifecycle planning.

Запрос цены Контакты
XA7S25-1CSGA324I - Spartan-7 FPGA, 150 I/O | AMD
XA7S25-1CSGA324I

XA7S25-1CSGA324I - Spartan-7 FPGA, 150 I/O | AMD

The AMD XA7S25-1CSGA324I is a member of the Spartan-7 XA family of Field Programmable Gate Arrays (FPGAs), designed for automotive and industrial applications requiring high performance and reliability. It features 23,360 logic cells, 3,650 adaptive logic modules (ALMs), and 1.58 Mbit of block RAM, providing ample resources for moderate-complexity digital designs. The device is housed in a 324-ball CSGA (Chip-Scale BGA) package with 150 user I/O pins, supporting a core voltage of 0.95V to 1.05V and operating over a temperature range of -40°C to +100°C. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence "field-programmable." FPGAs consist of an array of programmable logic blocks, interconnects, and I/O blocks, allowing them to implement any digital logic function. They are a subset of programmable logic devices (PLDs) and sit within the broader category of embedded processors and controllers. FPGAs are distinct from microcontrollers and ASICs because they offer reconfigurability, enabling rapid prototyping and in-field updates. Key features of the XA7S25-1CSGA324I include 150 user I/Os, 1.58 Mbit of block RAM, and support for various I/O standards such as LVCMOS, LVDS, and SSTL. The device is AEC-Q100 qualified, making it suitable for automotive electronics. It also supports partial reconfiguration and has built-in security features like AES bitstream encryption. The CSGA-324 package offers a compact footprint with a 0.8mm ball pitch, ideal for space-constrained designs. Technically, the Spartan-7 family is built on a 28nm process, balancing performance and power efficiency. The XA7S25 includes DSP slices for signal processing, clock management tiles (CMT) with PLLs and MMCMs, and high-speed transceivers (though this specific variant does not include GTP transceivers). The device supports configuration via JTAG, SPI, or BPI interfaces, and can be programmed using AMD's Vivado Design Suite. Typical applications include automotive driver assistance systems (ADAS), industrial motor control, machine vision, and communication interfaces. The XA7S25's combination of logic density, I/O count, and automotive qualification makes it ideal for these environments. When designing with this FPGA, ensure proper decoupling of the core and I/O supplies, and follow the layout guidelines in UG475 for the CSGA package. The device requires a 1.0V core supply and 1.8V/2.5V/3.3V I/O supplies, depending on the bank configuration.

Запрос цены Контакты
XA7Z020-1CLG400Q - Automotive Zynq-7000 SoC with Artix-7 FPGA | AMD
XA7Z020-1CLG400Q

XA7Z020-1CLG400Q - Automotive Zynq-7000 SoC with Artix-7 FPGA | AMD

The AMD XA7Z020-1CLG400Q is an automotive-grade Zynq-7000 XA System-on-Chip (SoC) integrating a dual-core ARM Cortex-A9 MPCore processor with CoreSight debug, an Artix-7 FPGA fabric containing 85K logic cells, and 6.25 Gb/s transceivers, packaged in a 400-ball CSPBGA (CLG400, 17x17 mm, 0.8 mm pitch). It targets AEC-Q100 Grade 2 operating conditions (-40C to +105C Tj) for automotive driver assistance, infotainment, and industrial vision systems. An SoC FPGA (System-on-Chip with FPGA fabric) is a class of heterogeneous computing device that combines a hardened Application Processor (APU) subsystem with programmable logic on a single die. The ARM Cortex-A9 cluster runs up to 667 MHz in this speed grade, executing an OS (typically Linux or AUTOSAR) while the Artix-7 PL accelerates parallel DSP, sensor fusion, and custom interfaces. This architecture sits within the broader hierarchy of embedded processors -> microcontroller/MPU -> SoC FPGA -> heterogeneous compute platform. Key device highlights include 53,200 LUTs, 560 Kbit block RAM, 220 DSP48E1 slices, and 200 user I/O pins. The processing system adds a NEON media engine, single/double-precision FPU, L1/L2 caches, and a rich peripheral set (USB 2.0, Gigabit Ethernet, SD/SDIO, CAN 2.0B, UART, SPI, I2C). Hard PCIe Gen2 x4 controllers, 32-bit DDR3/DDR3L memory controller, and 4 high-speed serial transceivers enable high-bandwidth interfaces. From an architectural perspective, the device is built on a 28 nm HPL process with separate PS and PL power domains, allowing the processor to operate while the FPGA fabric is held in reset (or vice versa). The 667 MHz Cortex-A9 in the -1 speed grade is the slowest in the Zynq family (versus the -2 grade at 866 MHz), trading some CPU throughput for cost savings in non-throughput-critical designs. Typical automotive applications include surround-view ADAS camera fusion, automotive Ethernet gateways, HMI/infotainment controllers, and motor-control servo drives. Industrial uses range from machine vision over GigE Vision to deterministic EtherCAT controller nodes. A key design consideration is power-tree sequencing - PS and PL each require dedicated 1.0V core and 1.8V/2.5V/3.3V auxiliary rails, and the PS must boot first through a dedicated configuration process. This page synthesizes DigiKey distributor pricing, parametric cross-references, and practical design notes not found in the standalone datasheet PDF.

Запрос цены Контакты
XC2287M104F80LRABKXUMA1 - 16/32-Bit 80MHz 832KB Flash MCU | Infineon
XC2287M104F80LRABKXUMA1

XC2287M104F80LRABKXUMA1 - 16/32-Bit 80MHz 832KB Flash MCU | Infineon

The Infineon XC2287M104F80LRABKXUMA1 is a 16/32-bit C166SV2 XC22xxM family microcontroller integrating a CISC/DSP/RISC processing core running at 80 MHz with 832 KB of on-chip Flash and 58 KB RAM, supplied in a 144-pin PG-LQFP-144-4 package with exposed pad. It targets automotive and industrial powertrain, body, and chassis applications requiring deterministic real-time response combined with DSP-grade signal processing throughput on a single die. A microcontroller (MCU) is a single-chip processing subsystem that integrates a CPU core, program and data memory (Flash, ROM, RAM), peripheral interfaces (ADC, timers, communication buses), and power management. Within the broader semiconductor taxonomy, MCUs sit inside Embedded Processors and Controllers, alongside microprocessors (MPUs) and system-on-chips (SoCs); they are typically selected over MPUs when deterministic latency, low power, and tight BOM integration matter more than raw application-processor performance. The C166S V2 core inherits the classic C166 instruction set with DSP extensions and RISC-like single-cycle execution, placing this part in the legacy 16-bit automotive MCU segment alongside derivatives such as the XC2764X and XC2336D families. Key features of the XC2287M104F80LRABKXUMA1 include 832 KB program Flash, 58 KB SRAM, an on-chip 10-bit ADC with up to 118 channels per the JLCPCB catalog listing, an operating voltage range of 3.0 V to 5.5 V, and an industrial-grade temperature range of -40 °C to +125 °C. The 80 MHz C166S V2 core is paired with a MAC (multiply-accumulate) unit, enabling single-cycle DSP operations suitable for sensor signal conditioning and field-oriented motor control. The LQFP-144 package with exposed pad supports an external thermal pad for improved heat dissipation in power-dense automotive ECUs. Architecturally, the XC2287M pairs two independent on-chip peripherals: a MultiCAN module with up to five CAN nodes for automotive network integration, plus USART, SSC, and I2C interfaces for sensor and actuator links. The integrated Peripheral Event Controller (PEC) enables DMA-style peripheral-to-memory transfers, allowing CPU background time for high-rate ADC-to-memory capture without interrupt overhead. Combined, this peripheral mix makes the part appropriate for multi-bus automotive ECUs where CAN-FD-class networking, deterministic ADC sequencing, and DSP-class signal processing are all required on one chip. Typical applications include automotive body control modules (BCM), electric power steering (EPS) motor controllers, HVAC blower/temperature control, instrument cluster signal processing, and industrial servo/motor control. Designers also deploy the XC2287M in industrial inverter front-ends and CAN-connected sensor hubs. When selecting this part, verify that your toolchain supports the C166S V2 instruction set and that the chosen compiler (e.g., Keil C166, TASKING, iSystem winIDEA) generates code for the C166S V2 core; pin-compatible Infineon XC2286/2288 family members can be substituted with only Flash capacity differences for shorter code footprints. The exposed pad must be soldered to the PCB ground plane for thermal and electrical performance. This page synthesizes distributor pricing, same-brand drop-in alternatives, and practical design notes that complement, but do not replace, the Infineon XC228xM datasheet.

Запрос цены Контакты
XC2C128-6TQ144C - 128-Macrocell 1.8V CPLD | Xilinx
XC2C128-6TQ144C

XC2C128-6TQ144C - 128-Macrocell 1.8V CPLD | Xilinx

The Xilinx XC2C128-6TQ144C is a 128-macrocell CoolRunner-II complex programmable logic device with a 5.7 ns propagation delay, 100 I/O pins, and a 144-lead TQFP package. Designed around a 1.8 V internal supply, it provides 3,000 logic gates, eight logic array blocks, and nonvolatile in-system programmability for compact programmable-logic designs. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines multiple programmable logic arrays with a fixed interconnect structure. Within the broader hierarchy, a CPLD is a programmable-logic IC, a member of the FPGA and CPLD category, and an alternative to a small field-programmable gate array. The CoolRunner-II architecture is intended for deterministic signal routing, interface adaptation, control logic, and designs requiring rapid configuration without an external configuration memory. The XC2C128-6TQ144C provides 128 macrocells, 100 I/O pins, eight logic array blocks, and approximately 3,000 gates. Its stated propagation delay is 5.7 ns, while the -6 suffix identifies the device's speed grade. The low-power design targets 1.8 V systems and is reported to support quiescent current as low as 13 uA. The commercial-temperature variant operates from 0 C to 70 C according to the indexed product specifications. The device uses 0.18-micron CMOS technology and supports in-system programmability, allowing a board designer to configure the logic after soldering. Its fixed interconnect architecture supports repeatable routing and compact implementation of glue logic. Signal-path design should still account for setup and hold requirements, output loading, input thresholds, and the propagation delay of the selected logic implementation rather than treating the headline 5.7 ns figure as a complete timing guarantee. Typical uses include industrial control, communications equipment, consumer interfaces, battery-operated products, and embedded control systems where the logic density must fit within a moderate package. A designer can use the XC2C128-6TQ144C for bridge functions, protocol conversion, state-machine control, data-routing logic, or startup sequencing. It is particularly useful where nonvolatile configuration, low quiescent power, and a compact 144-pin surface-mount package are more important than very high logic density. PCB implementation should provide a stable 1.8 V supply, short return paths, and decoupling close to the power pins. Confirm the exact pin assignments and power requirements against the manufacturer datasheet before assigning board functions. Because the TQFP package has fine-pitch leads, inspect solder joints for bridging and confirm the board's exposed thermal and ground geometry during assembly. This product page combines device specifications, package information, practical implementation guidance, and drop-in CoolRunner-II alternatives. It also identifies the timing, temperature, and supply distinctions that matter when comparing speed grades or planning a board revision without changing the existing 144-lead footprint.

Запрос цены Контакты
XC2C128-6VQ100C - 128-Macrocell 6ns CPLD | AMD
XC2C128-6VQ100C

XC2C128-6VQ100C - 128-Macrocell 6ns CPLD | AMD

The AMD XC2C128-6VQ100C is a CoolRunner-II complex programmable logic device with 128 macrocells, a 6 ns propagation-delay grade, and a 100-terminal TQFP package. The device also supports an operating clock frequency up to 152 MHz and provides 80 inputs, making it a compact programmable-logic option for control, interface, glue-logic, and signal-processing designs. Its surface-mount package supports automated assembly while retaining a 100-pin gull-wing footprint. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines multiple programmable logic blocks with a deterministic internal interconnect. The CoolRunner-II architecture places the XC2C128 in the broader hierarchy of programmable logic devices: CPLD, programmable logic, semiconductor, and digital logic IC. Its macrocell-based structure is particularly useful when a design needs predictable signal routing, compact logic integration, and relatively straightforward reconfiguration during product development. The XC2C128 family provides 128 macrocells, 80 inputs, and clock performance up to 152 MHz. The -6 suffix identifies the 6 ns propagation-delay performance grade, while the VQ100 suffix identifies the 100-terminal package. The C suffix identifies the commercial temperature grade. These characteristics make the part useful for bus decoding, state machines, traffic-light controllers, industrial sequencing, data-capture logic, and general-purpose embedded control. Unlike an FPGA with a large array of general-purpose logic and routing resources, a 128-macrocell CPLD is suited to compact deterministic designs where a modest number of gates, registers, and interconnect paths are required. Its architecture can simplify timing closure for modest control logic and reduce the need for external glue devices. Designers should still evaluate every clock domain, asynchronous input, output timing constraint, and pin assignment against the device timing report. Typical uses include industrial automation, telecommunications, consumer control, embedded systems, instrumentation, and communication-interface logic. The 152 MHz maximum clock rating supports designs in which the CPLD performs protocol conversion, data formatting, or bus arbitration, while the 6 ns grade can be valuable for short combinational or registered paths. The 100-terminal package also offers more I/O than a small logic PLD, allowing multiple external interfaces to share one programmable device. For a reliable implementation, use the AMD DS093 pinout and package information when assigning the PCB footprint, connect unused inputs to defined levels, and validate timing after programming. Place decoupling close to the supply pins, route clocks as controlled signals, and confirm that every external interface has compatible voltage levels. Configuration and power-up sequencing must follow the CoolRunner-II design guidance. This product page consolidates the device specifications, package details, sourcing guidance, pin-compatible family alternatives, comparison parameters, and practical implementation notes into one engineering reference. The alternatives and comparisons help identify speed- and temperature-grade options, while the design notes focus on PCB, timing, configuration, and signal-integrity decisions that are essential beyond the headline CPLD specifications.

Запрос цены Контакты
XC2C128-7CP132C - 128-Macrocell 1.8V CPLD | AMD
XC2C128-7CP132C

XC2C128-7CP132C - 128-Macrocell 1.8V CPLD | AMD

AMD XC2C128-7CP132C is a 128-macrocell CoolRunner-II complex programmable logic device with 80 user I/Os, a 4.5 ns pin-to-pin propagation delay, and a 1.8 V supply in the 132-terminal CP132 package. It combines nonvolatile configuration storage, reusable logic structures, and deterministic CPLD timing in a compact surface-mount package. A complex programmable logic device, or CPLD, is a programmable semiconductor that combines multiple logic functions into one integrated component. Its internal macrocells contain AND/OR-style programmable logic paths and registers that implement Boolean equations and sequential functions. CPLDs sit between simple fixed-function gates and higher-capacity FPGAs, offering predictable timing, nonvolatile configuration, and relatively low power consumption for control logic, interface logic, and signal conditioning. The XC2C128 family provides 128 macrocells, 80 user I/Os, and CMOS technology optimized for 1.8 V systems. Its specified pin-to-pin delay is as fast as 4.5 ns, while its low-power design supports standby currents as low as 13 µA. The -7 speed designation corresponds to the 7 ns performance grade, and the final C suffix identifies the commercial temperature grade. The device uses on-chip nonvolatile configuration memory, allowing programmed logic to be retained without a separate configuration PROM. This makes it suitable for control systems that must restart without an external programming sequence. Its macrocell-based architecture also provides deterministic propagation behavior, which simplifies timing analysis in glue-logic, bus-control, and equipment-control designs. Typical applications include portable and battery-powered instruments, communication-interface logic, industrial control panels, test and measurement equipment, and compact embedded control systems. The 80 user I/Os support external buses, status indicators, sensors, relays, and mixed-signal interface functions when voltage levels and timing requirements permit. Designers should use the pin-description table in the AMD DS093 manufacturer datasheet to assign every CP132 ball, and they should verify the power rails, decoupling requirements, configuration interface, and unused-pin treatment for the selected board implementation. The published operating range for this commercial-grade ordering code is 0 °C to 70 °C.

Запрос цены Контакты
XC2C128-7CP132I - 128-Macrocell 1.8V Zero-Power ISP CPLD | AMD Xilinx
XC2C128-7CP132I

XC2C128-7CP132I - 128-Macrocell 1.8V Zero-Power ISP CPLD | AMD Xilinx

The AMD Xilinx XC2C128-7CP132I is a 128-macrocell CoolRunner-II complex programmable logic device with a 7 ns propagation-delay class, 1.8 V internal supply, and in-system programmability. It is packaged in a 132-ball TFBGA/CSPBGA surface-mount package. The device provides approximately 3,000 equivalent gates, 100 I/O pins, and eight logic array blocks for implementing control logic, interface logic, and state machines in compact embedded systems. A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines multiple programmable logic blocks, programmable interconnect, and I/O structures into one reconfigurable digital-logic device. The XC2C128 belongs to the CoolRunner-II family and provides a fixed architecture with macrocell-based logic resources. Compared with a discrete gate-array design, a CPLD allows logic changes through configuration programming without changing the printed circuit board. The XC2C128-7CP132I is identified by the -7 speed grade, industrial temperature grade, and CP132 package designation. Its zero-power ISP characteristic means that unused configurable logic can be placed in a low-power state, helping reduce system power consumption in designs with variable activity. The device supports 1.7 V to 1.9 V internal supply operation, making it suitable for modern low-voltage embedded control systems when the surrounding interface and configuration circuitry is compatible. The 128-macrocell resource supports up to approximately 3,000 gates of logic and eight logic array blocks. With 100 I/O pins, the CPLD can bridge multiple digital interfaces, implement protocol state machines, perform bus arbitration, or combine glue logic around processors, sensors, and memory controllers. Its 132-ball package is intended for compact surface-mount designs where a fine-pitch BGA footprint and moderate logic density are required. Typical applications include industrial control and factory automation, instrumentation, embedded motor and power-control logic, communication-interface support, test equipment, and compact consumer or portable systems. The device is particularly useful when a design needs deterministic reconfigurable logic close to a processor or analog subsystem. Compared with a large FPGA, the fixed CoolRunner-II architecture can provide a simpler implementation path for moderate logic designs and lower-capacity glue-logic applications. When designing around the XC2C128-7CP132I, verify the exact ball assignments, configuration interface, I/O standards, and supported I/O voltage combinations against the AMD XC2C128 CoolRunner-II CPLD Specification DS093. Place the device on a multilayer PCB with short, controlled-length configuration and signal routes, provide the required decoupling, and confirm thermal performance under the intended operating temperature. This page combines the identified device characteristics with sourcing context, package guidance, and practical design considerations for engineers evaluating the XC2C128-7CP132I.

Запрос цены Контакты
XC2C128-7TQ144C - 128-Macrocell 1.8V CPLD | AMD Xilinx
XC2C128-7TQ144C

XC2C128-7TQ144C - 128-Macrocell 1.8V CPLD | AMD Xilinx

The AMD Xilinx XC2C128-7TQ144C is a 128-macrocell CoolRunner-II complex programmable logic device with 3,000 usable system gates, 1.8 V operation, and a maximum pin-to-pin propagation delay of 4.5 ns. It is housed in a 144-pin TQFP package measuring 14 x 14 mm and is intended for commercial-temperature embedded logic designs. The device also provides up to 80 user I/O pins and supports nonvolatile configuration for reliable field operation. A CPLD is a programmable semiconductor that combines multiple programmable logic blocks and a flexible interconnect in one package. The CPLD hierarchy is complex programmable logic device, programmable logic device, digital logic IC, and integrated circuit. Compared with an FPGA, a CPLD generally provides simpler configuration, deterministic startup behavior, and useful low-power operation for fixed control, interface, and glue-logic functions. The XC2C128-7TQ144C combines 128 macrocells with 152 MHz system performance and 4.5 ns pin-to-pin timing. Its 1.8 V supply orientation supports modern low-voltage digital systems, while the 13 µA quiescent-current figure makes it relevant to portable and power-conscious equipment. The 80 user I/O pins provide substantial connectivity for bus arbitration, state machines, data capture, address decoding, and peripheral control. The device uses 0.18 µm CMOS technology and belongs to the CoolRunner-II family, whose Fast Zero Power architecture targets low static power in portable systems. Nonvolatile configuration means the programmed logic is retained without continuous configuration-memory writes. Designs can implement deterministic control logic, parallel-to-serial data conversion, clock-domain interface functions, and fixed-format signal processing without using a larger FPGA. Typical uses include industrial automation, portable instrumentation, embedded control, communications interfaces, and power-management sequencing. In an industrial controller, the CPLD can combine legacy bus interfaces with deterministic actuator logic. In portable equipment, its low quiescent current and 80 I/O pins can simplify control around a host processor. In communications equipment, the 4.5 ns pin-to-pin delay supports faster combinational paths than a slower speed grade. Designers should use the AMD DS093 device specification for the exact 144-pin assignment, configuration interface, voltage limits, and timing constraints. PCB routing must preserve the recommended power and ground distribution, while unused inputs should be handled according to the device guidance. The 144-pin TQFP footprint also requires careful assembly planning because its 0.5 mm pitch limits routing and inspection access. This page combines the key device characteristics, documented package details, practical application guidance, and qualified same-package alternatives. It also identifies unresolved electrical details that engineers should confirm in the manufacturer specification before releasing a production schematic or PCB footprint.

Запрос цены Контакты