Товары (44.000+)

XC6SLX100-2FG676C - Spartan-6 LX FPGA, 667 MHz | AMD
XC6SLX100-2FG676C

XC6SLX100-2FG676C - Spartan-6 LX FPGA, 667 MHz | AMD

AMD XC6SLX100-2FG676C is a Spartan-6 LX field-programmable gate array with a 667 MHz internal frequency, supplied in a 676-BGA package. The device is built on 45 nm FPGA technology and uses the -2 performance grade for mid-speed programmable-logic designs. Its commercial operating-temperature range is 0°C to 85°C, while the lead-free package is specified as a 19 mm × 19 mm CSBGA construction with a 0.80 mm pitch. These characteristics position the FPGA for embedded control, interface bridging, signal processing, and industrial automation systems requiring configurable parallel logic and substantial general-purpose I/O. A field-programmable gate array is a semiconductor whose logic fabric, interconnect, and configurable I/O blocks can be programmed after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining parallel programmable logic, block RAM, dedicated processing resources, dedicated I/O resources, and programmable serial transceivers where applicable. This differs from a fixed-function application-specific integrated circuit because the board designer can adapt the implemented logic and interface behavior without changing the physical device. The Spartan-6 LX family is positioned for designs requiring more integration than small programmable logic devices while retaining a comparatively accessible FPGA architecture. The 667 MHz internal-frequency figure establishes the device's performance class, although actual interface throughput also depends on the selected I/O standards, clocking topology, routing, and implemented logic. The -2 speed suffix identifies the performance grade, and the trailing package and temperature identifiers distinguish the exact ordering configuration from other Spartan-6 LX members. Designs using this device must account for its BGA assembly, ball assignment, power architecture, configuration method, and high-speed routing requirements. Configuration data must be loaded correctly before the FPGA begins its user-defined logic operation. Board planners should preserve the manufacturer's recommended power, decoupling, clock, and package-construction guidance, especially around banks operating at different voltage domains. Signal integrity is also important because the fine 0.80 mm package pitch constrains escape routing and demands careful PCB stack-up and return-path planning. Typical uses include industrial automation controllers, network-interface bridging, data-acquisition equipment, embedded video and control systems, communications infrastructure, and test equipment. The Spartan-6 LX fabric is particularly useful when several fixed interfaces must be consolidated into one programmable device while preserving parallel I/O flexibility. In these systems, the FPGA can implement protocol conversion, buffering, timing control, data formatting, and supervisory logic around external transceivers or processors. The principal design trade-off is that an FPGA adds configuration, toolchain, pin-planning, and thermal-management requirements compared with an ASIC or fixed microcontroller. Designers should choose this part when programmable logic, flexible I/O, and field-update capability justify that complexity. If only a small control algorithm is required, a microcontroller may be simpler; if fixed high-volume functionality is required, an ASIC may ultimately be more economical. This product record consolidates the available package, speed, process, temperature, and sourcing information, then adds application guidance, pinout-status disclosure, verified comparison fields, and practical design notes. It is intended to help engineers screen the exact ordering code before reviewing the manufacturer Spartan-6 documentation and completing board-level validation.

Запрос цены Контакты
XC6SLX100-2FG676I - 101261-Cell Spartan-6 LX FPGA | AMD
XC6SLX100-2FG676I

XC6SLX100-2FG676I - 101261-Cell Spartan-6 LX FPGA | AMD

The AMD XC6SLX100-2FG676I is a Spartan-6 LX field-programmable gate array with 101261 logic cells, 480 I/O, a -2 speed grade, and a 676-ball BGA package. It is manufactured using 45 nm CMOS technology and operates from a 1.2 V core supply. The industrial-temperature suffix I supports an operating range of -40 °C to 100 °C junction temperature. This combination of substantial programmable logic, 480 I/O, and a large pin-count package makes the device suitable for embedded systems requiring parallel interfaces, programmable signal processing, and extensive interconnection. A field-programmable gate array is a programmable logic semiconductor in which digital functions are implemented through configurable lookup tables, routing resources, block RAM, and dedicated input/output blocks. Within the device hierarchy, an FPGA belongs to programmable logic devices and sits above general-purpose fixed-function processors when designers need parallel hardware execution, adaptable interfaces, or rapid hardware revisions. The Spartan-6 LX family combines these FPGA resources with a 45 nm process optimized for cost-sensitive embedded and industrial designs. Key features of the XC6SLX100-2FG676I include 101261 logic cells, 480 user I/O, a stated internal frequency of 667 MHz, and 45 nm CMOS construction. The 676-BGA package provides a high pin count and supports designs requiring numerous board connections. The -2 speed grade positions this part below the -3 grade in the Spartan-6 LX ordering hierarchy, while the I suffix identifies the industrial-temperature option. Its large logic-cell count allows multiple processors, control blocks, communication interfaces, and data-processing pipelines to be consolidated into one device. The device belongs to the Spartan-6 LX FPGA family, which targets bridging, industrial automation, embedded control, networking, video processing, and general-purpose programmable logic. Its architecture combines programmable logic, dedicated hard blocks, and abundant I/O in a single package. Compared with smaller members of the Spartan-6 LX family, the XC6SLX100 configuration provides greater logic density and more I/O, allowing a design to connect external memory, high-speed interfaces, sensors, converters, and display or communications peripherals without distributing the system across multiple programmable devices. Typical applications include industrial control gateways, data-acquisition systems, network-interface bridges, embedded video processors, and test equipment. The 480 I/O count is useful for parallel sensor interfaces, memory buses, capture logic, and legacy peripheral connections, while the programmable architecture allows protocol updates without changing the PCB. For automotive, industrial, and communications equipment, the I temperature designation is the relevant selection factor when the design must operate across an extended temperature range. When planning the PCB, treat the 676-ball BGA as a high-density, fine-pitch assembly and follow the package ball map and recommended escape-routing guidance in the AMD/Xilinx package documentation. Power, ground, decoupling, configuration, clocking, and I/O planning should be completed before layout because changes to BGA escape routing can affect signal integrity and manufacturability. The -2 speed grade also needs to be considered during timing closure rather than relying only on the stated internal frequency. This product page consolidates the exact device identity, package and logic resources, drop-in family alternatives, application guidance, and design cautions engineers need when evaluating the XC6SLX100-2FG676I for a new programmable-logic design. It also distinguishes the important speed-grade and temperature-grade changes that determine whether an otherwise pin-compatible Spartan-6 LX option is suitable for the intended product environment.

Запрос цены Контакты
XC6SLX100-2FGG676C - 101K LEs Spartan-6 LX FPGA | AMD Xilinx
XC6SLX100-2FGG676C

XC6SLX100-2FGG676C - 101K LEs Spartan-6 LX FPGA | AMD Xilinx

The AMD Xilinx XC6SLX100-2FGG676C is a Spartan-6 LX family Field Programmable Gate Array (FPGA) with 101,261 logic cells, 4,939,776 system gates, and 480 I/O pins, housed in a 676-ball Fine-Pitch Ball Grid Array (FBGA-676) package with 0.8 mm ball pitch and a 19×19 mm body. The -2 speed grade targets mid-range performance and is fabricated on a 45 nm CMOS process with a 1.2 V core supply; commercial temperature grade (C suffix) supports 0 °C to +85 °C operation. What is an FPGA? An FPGA (Field Programmable Gate Array) is a semiconductor device whose logic fabric, interconnect, and I/O can be reconfigured by the designer after PCB assembly. The Spartan-6 LX position in the broader hierarchy is: programmable logic -> FPGA -> low-power FPGA family. Compared with ASICs, FPGAs trade raw unit cost for design flexibility, in-system reprogrammability, and rapid prototyping, and they sit in the same tier as CPLDs and complex PLDs for glue-logic and parallel DSP workloads. Key features include 3.8 Mb of block RAM, 180 DSP48A1 slices, integrated Memory Controller Blocks (MCBs), and up to 108 Mb of embedded memory. The device supports common interfaces such as DDR, DDR2, DDR3, LVDS, LVCMOS, and PCI Express endpoint via the integrated GTP transceiver infrastructure in compatible LXT variants. The XC6SLX100 offers a balanced cost/performance ratio ideal for high-volume, cost-sensitive designs requiring substantial logic density. The LX architecture uses a 6-input LUT fabric with dedicated carry logic, distributed RAM and shift-register resources, and a multi-clock tiles structure. The internal core can run up to approximately 667 MHz depending on speed grade, and high-speed SelectIO technology provides flexible I/O support for single-ended and differential standards at data rates into the hundreds of Mbps range. Typical applications include industrial motor control, LED video walls and digital signage, surveillance IP cameras, automotive driver assistance (non-safety-critical domains), consumer video processing, and small-cell baseband processing. The Spartan-6 LX family is widely used as a bridge between CPLD and higher-density Virtex-class FPGAs. When designing with this device, plan for a 1.2 V core rail and a 2.5 V/3.3 V auxiliary supply, with I/O voltages per bank. Use Xilinx ISE Design Suite (or Vivado with legacy project import) for bitstream generation; the FBGA-676 footprint demands careful PCB stack-up and via-in-pad escape routing. This page synthesizes distributor pricing, drop-in alternatives within the Spartan-6 and competing Cyclone IV families, and practical PCB design guidance not found in a single source datasheet.

Запрос цены Контакты
XC6SLX100-3FG484C - 101,261-Cell Spartan-6 LX FPGA | AMD
XC6SLX100-3FG484C

XC6SLX100-3FG484C - 101,261-Cell Spartan-6 LX FPGA | AMD

AMD XC6SLX100-3FG484C is a Spartan-6 LX field-programmable gate array with 101,261 logic cells, 4,939,776 RAM bits, 326 I/O, and 667 MHz internal frequency, housed in a 484-pin CSBGA package. The device uses 45 nm CMOS technology and supports a 1.2 V supply, making it suitable for configurable control, signal-processing, communications, and embedded-system designs that require substantially more logic than a small microcontroller provides. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and other configurable resources are programmed after manufacture. An FPGA belongs to the programmable-logic hierarchy above fixed-function logic ICs and microcontrollers. Its parallel hardware resources can execute multiple control, arithmetic, filtering, and interface tasks concurrently. This makes the Spartan-6 LX family appropriate when deterministic operation, flexible logic capacity, custom peripherals, and board-level configuration are more important than the simplicity of a fixed controller. The XC6SLX100-3FG484C combines 101,261 logic cells with 4,939,776 bits of block RAM and 326 user I/O. Its -3 designation identifies the highest-performance speed grade in the Spartan-6 LX family. The 667 MHz internal frequency provides a timing reference for the programmable fabric, while the large logic population supports parallel datapaths, high-speed state machines, protocol bridges, image-processing pipelines, and multi-channel interface aggregation. The Spartan-6 LX architecture supports programmable logic, dedicated block RAM, dedicated digital signal processing resources, clock-management functions, and general-purpose I/O. These resources allow a complete subsystem to be consolidated in one device instead of being divided among a processor, external memory, programmable logic, and multiple interface controllers. The 45 nm CMOS process and 484-pin surface-mount package support compact industrial, communications, instrumentation, and embedded-control equipment. Typical uses include industrial control and data acquisition, video and image processing, communications infrastructure, networking equipment, test and measurement systems, and embedded signal-processing platforms. The 326 I/O are especially useful when a design must connect directly to multiple converters, memories, transceivers, clocks, and control signals. Designers should still verify each selected bank voltage, I/O standard, differential interface, clock topology, and pin placement against the AMD package pinout files. The principal design trade-off is routing and timing complexity. Although the -3 grade offers the highest Spartan-6 LX performance, reaching a closed timing design at that grade can require more careful constraints, placement, and logic partitioning than a lower speed grade. Use the AMD package pinout files and the Spartan-6 synthesis, implementation, timing, and programming guidance before assigning power rails or routing board-level interfaces. This page combines the device architecture and package facts with a practical replacement comparison, design guidance, and sourcing-focused guidance. It highlights which same-package Spartan-6 LX variants preserve pin compatibility, where speed or temperature differences matter, and how to select a drop-in alternative without overlooking the qualification requirements of the original design.

Запрос цены Контакты
XC6SLX100-3FG484I - 667 MHz Spartan-6 LX FPGA | AMD
XC6SLX100-3FG484I

XC6SLX100-3FG484I - 667 MHz Spartan-6 LX FPGA | AMD

AMD XC6SLX100-3FG484I is a Spartan-6 LX field-programmable gate array with a 667 MHz internal frequency, supplied in a 484-pin CSBGA package measuring 19 mm by 19 mm with a 0.80 mm ball pitch. It is designed for industrial logic, embedded processing, communications, and control systems where configurable parallel logic and programmable peripherals must operate within an industrial temperature range. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and selected I/O resources are configured after manufacture. Within the product hierarchy, the XC6SLX100 belongs to the Spartan-6 LX FPGA family, combines programmable logic with configurable I/O, and occupies the position between fixed-function logic devices and larger soft processors or ASICs. This flexibility permits one board design to support multiple interfaces and can shorten development cycles compared with a custom ASIC. The -3 speed designation identifies the high-performance Spartan-6 speed grade, while the industrial suffix denotes operation from 0°C to 85°C. The device has 484 package balls and a lead-free CSBGA package. The product listing also identifies the family as Spartan-6 LX, and the device family documentation identifies -3 as the highest-performance grade among the listed Spartan-6 LX speed options. Spartan-6 LX devices combine programmable logic blocks with selectable I/O standards and dedicated resources for clocking, memory, and communications. Designers can implement parallel data acquisition, industrial interfaces, control logic, protocol bridges, and embedded systems without relying on a separate processor. The 0.80 mm ball pitch requires careful PCB layout, escape routing, and assembly-process control, especially when high-density fanout is required around the device. Typical uses include industrial factory automation, programmable logic controllers, instrument controllers, communication infrastructure, video-processing front ends, and embedded test systems. Its industrial temperature rating supports equipment intended for controlled factory and commercial environments, although thermal design must account for power dissipation beneath the large ball-grid array. For PCB implementation, use the AMD Spartan-6 package pinout files when assigning every power, ground, configuration, clock, and user I/O ball. Follow the package-specific via and solder-mask-land patterns, provide the required configuration circuitry, and complete signal-integrity and power-integrity analysis before fabrication. This page organizes the verified device identity, package details, temperature information, same-family alternatives, comparison parameters, and practical design guidance. It also distinguishes exact ordering-code differences that engineers must verify before reusing an existing FPGA board layout or approving an alternate component.

Запрос цены Контакты
XC6SLX100-3FG676C - 101261-Cell Spartan-6 LX FPGA | AMD
XC6SLX100-3FG676C

XC6SLX100-3FG676C - 101261-Cell Spartan-6 LX FPGA | AMD

The AMD XC6SLX100-3FG676C is a Spartan-6 LX field-programmable gate array with 101261 logic cells, 480 I/O, a 4.71 Mbit internal memory capacity, and a 676-ball BGA package. It operates from a 1.2 V core supply and is specified for a 0°C to 85°C commercial temperature range. The device uses 45 nm CMOS technology and is intended for programmable-logic designs requiring substantial parallel processing, embedded memory, and a high pin count. A field-programmable gate array is a programmable logic device in which configurable logic blocks, block RAM, programmable input/output resources, and dedicated clocking resources implement digital systems. Within the semiconductor hierarchy, an FPGA belongs to programmable logic devices, sits above simple fixed-function logic, and supports configuration-based adaptation of interfaces, control systems, signal processing, and embedded systems. The Spartan-6 LX family combines a large logic-cell count with block memory and high-speed I/O in a surface-mount BGA package. Key features of the XC6SLX100-3FG676C include 15822 application logic elements, 101261 register and LUT resources identified for this family member, 4.71 Mbit of internal memory, and 480 user I/O. Its -3 speed designation represents the highest-performance speed grade identified for the Spartan-6 LX family. The commercial suffix C corresponds to the stated 0°C to 85°C operating range, while the 676-ball package supports dense board-level interconnect without using perimeter leads. The FPGA is fabricated using 45 nm CMOS technology and operates with a 1.2 V core voltage. This process generation supports configurable logic, dedicated block RAM, digital clock management resources, programmable I/O standards, and external memory interfaces. Because FPGA pin multiplexing is design dependent, engineers must confirm each selected I/O standard, voltage bank, clock-capable pin, and configuration pin against the package pinout before finalizing the PCB layout. Typical uses include industrial automation, industrial networking, embedded control, test and measurement equipment, video processing, high-speed data acquisition, and communications infrastructure. The 480 available I/O positions make the device suitable for parallel sensor interfaces, multiple external memory devices, high-speed transceiver connections, and control systems combining logic with sizable on-chip buffering. PCB implementation should allocate a continuous ground-reference structure, controlled-decoupling power distribution, and unobstructed access to the device's configuration interface. Validate high-speed I/O return paths and length matching against the selected external memory and transceiver requirements. BGA assembly also requires an appropriate stencil, solder-paste process, and inspection plan because package interconnects cannot be visually inspected after reflow. This product record combines exact orderable-part characteristics, same-footprint Spartan-6 LX alternatives, parameter comparisons, and practical implementation guidance. It helps engineers separate electrical and temperature-grade choices from package or ordering-suffix differences before requesting a quote for the exact assembled device.

Запрос цены Контакты
XC6SLX100-3FG676I - 101261-Cell Spartan-6 LX FPGA | AMD
XC6SLX100-3FG676I

XC6SLX100-3FG676I - 101261-Cell Spartan-6 LX FPGA | AMD

AMD XC6SLX100-3FG676I is a Spartan-6 LX field-programmable gate array with 101,261 logic cells, 480 I/O, and a 676-ball BGA package. The device uses 45 nm CMOS fabrication and operates from a nominal 1.2 V core supply. Its -3 speed grade is the highest-performance grade in the Spartan-6 LX family, while the industrial suffix supports extended-temperature deployment. A field-programmable gate array, or FPGA, is a programmable digital logic device that combines configurable logic blocks, programmable interconnect, block RAM, and digital input/output resources. Within the semiconductor hierarchy, an FPGA belongs to programmable-logic ICs and complements fixed-function logic, microcontrollers, and DSP devices. Spartan-6 devices are commonly used where parallel hardware processing, high I/O density, reconfigurable logic, or deterministic control are valuable. Key features include 7,911 adaptive logic modules, 4,939,776 RAM bits, 480 I/O, and 101,261 logic cells according to the manufacturer product listing. The -3 grade identifies the highest-performance Spartan-6 LX speed option. The 676-BGA package provides a 27 mm by 27 mm body with a 1 mm ball pitch, supporting dense PCB routing while requiring careful escape-routing and thermal-design practices. The XC6SLX100 combines a large programmable logic fabric with on-chip memory resources and a large pin count. This combination supports parallel image processing, control-plane aggregation, protocol bridging, test equipment, and embedded communications systems. Programming uses the AMD/Xilinx FPGA configuration flow, allowing logic, memory, and I/O behavior to be updated through a configuration bitstream after manufacturing. Typical uses include industrial vision, high-speed data acquisition, communications infrastructure, instrumentation, embedded processing, and signal-processing subsystems. In each case, the 480-I/O count can reduce external multiplexing, while the large logic-cell and RAM resources permit multiple parallel pipelines. Designers should match external memory interfaces, clocking, and high-speed I/O requirements to the selected Spartan-6 architecture and board constraints. A critical implementation consideration is that the 676-BGA footprint demands multilayer PCB construction, fine-pitch escape routing, and careful power and ground-plane management. Follow AMD's Spartan-6 package pinout files when assigning balls and verify the selected design's pin constraints against the exact device variant. Configuration startup, clocking, decoupling, and signal-integrity requirements must also be reviewed before fabrication. This page organizes the verified device specifications, package details, same-footprint alternatives, comparison parameters, and practical design guidance for engineers evaluating the XC6SLX100-3FG676I. It also provides focused guidance for distinguishing speed-grade, temperature-grade, and device-density options before selecting a drop-in replacement.

Запрос цены Контакты
XC6SLX100-3FGG484C Spartan-6 LX FPGA 101K Cells | AMD Xilinx
XC6SLX100-3FGG484C

XC6SLX100-3FGG484C Spartan-6 LX FPGA 101K Cells | AMD Xilinx

The AMD Xilinx XC6SLX100-3FGG484C is a Spartan-6 LX Field Programmable Gate Array (FPGA) delivering 101,261 logic cells, 4,939,776 system gates, and 326 user I/O in a 484-ball Fine-pitch BGA package with -3 (highest performance) speed grade. An FPGA (Field Programmable Gate Array) is a semiconductor device whose logic function is defined by the customer after manufacture, rather than at the fab. FPGAs sit in the broader hierarchy of programmable logic devices (PLD) -> CPLD -> FPGA -> SoC FPGA, and combine configurable logic blocks (CLBs), programmable routing, dedicated DSP slices, Block RAM, and hardened I/O serializers. Unlike microcontrollers (which execute instructions sequentially), FPGAs perform true parallel datapath operations, making them the preferred choice for high-throughput DSP, packet processing, and custom interface bridging where latency and determinism matter more than raw CPU clock rate. The XC6SLX100-3FGG484C integrates 180 DSP48A1 slices for fixed- and floating-point acceleration, 4,824 Kbits of Block RAM, four clock management tiles (CMTs) with PLL/DLL, and SelectIO technology supporting voltages from 1.2V to 3.3V. The -3 speed grade delivers the highest Fmax in the Spartan-6 LX family, while the 45 nm process node keeps static power in the milliwatt range compared to older 90/65 nm nodes. Typical applications include high-volume consumer and industrial designs such as video processing pipelines, motor control, industrial Ethernet bridges, PCIe endpoint controllers (when paired with an external PHY), and digital signage. Designers also use it for custom packet processors in telecom backhaul equipment and as a flexible I/O expander/glue logic replacement for multiple CPLDs on a single board. When designing with the -3 speed grade, ensure your PCB footprint supports the FGG484 (Pb-free, 1.0 mm pitch, 19 x 19 mm body) BGA land pattern and provide adequate via-in-pad or microvia escape routing. Decoupling must follow the Spartan-6 PCB Design Guide for the VCCINT, VCCAUX, and VCCO rails to meet the -3 timing closure across the full industrial temperature range. This page synthesizes distributor pricing, verified drop-in same-family and cross-brand Spartan-6 equivalents, and practical board-level design guidance that is not consolidated in the manufacturer datasheet itself.

Запрос цены Контакты
XC6SLX100-L1FG676I - 101261-Cell Spartan-6 LX FPGA | AMD
XC6SLX100-L1FG676I

XC6SLX100-L1FG676I - 101261-Cell Spartan-6 LX FPGA | AMD

The AMD XC6SLX100-L1FG676I is a Spartan-6 LX field-programmable gate array with 101,261 logic cells, 7,911 configurable logic blocks, 480 I/O, and a maximum clock frequency of 500 MHz. It is manufactured on 45 nm CMOS technology, operates from a 1.05 V core supply, and is housed in a 676-ball FBGA package. These characteristics make it suitable for embedded systems requiring substantial parallel processing capability in a single programmable device. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O can be configured after fabrication. Within the product hierarchy, an FPGA belongs to the programmable-logic and CPLD family, combines thousands of configurable logic blocks with programmable routing, and sits above fixed-function logic devices. Spartan-6 devices balance integration, power consumption, and cost for industrial, communications, consumer, and embedded applications. Key device features include 101,261 logic cells, 7,911 configurable logic blocks, 480 user I/O, and operation from a 0.95 V to 1.05 V core-voltage range. The 45 nm CMOS process supports high integration while maintaining a 1.2 V I/O supply as identified by the device family. A 676-ball FBGA provides the board-level interconnect density required for high-pin-count programmable logic designs. The Spartan-6 LX architecture integrates configurable logic blocks, block RAM, digital signal processing slices, programmable interconnect, clock-management resources, and general-purpose I/O. The XC6SLX100 device provides 493,9776? No unit appears in the product listing for this identifier; use the listed 101,261-cell and 7,911-CLB architecture values for capacity planning. The maximum listed clock frequency is 500 MHz, while the maximum combinatorial delay is listed as 0.460 ns. Typical applications include industrial control, industrial networking, embedded video processing, communications infrastructure, instrumentation, and high-density digital signal processing. The large logic-cell count supports parallel datapaths and control logic, while 480 I/O allows the FPGA to interface directly with external memory, transceivers, converters, and industrial interfaces. System partitioning and I/O standards should be checked against the selected board-level design. For a new PCB, use the manufacturer package outline and pinout because a 676-ball FBGA requires precise escape routing, clean power distribution, and careful ball-assignment review. Place decoupling capacitors close to supply balls, preserve the recommended power and ground-plane topology, and validate high-speed I/O signal integrity with the selected memory and transceiver devices. This page combines the verified device identity, package and architecture details, family alternatives, comparison parameters, and practical PCB guidance to support faster component selection, sourcing, and hardware implementation. It is designed to help engineers distinguish exact ordering-code differences before committing a Spartan-6 LX FPGA to a new design.

Запрос цены Контакты
XC6SLX100-N3FG484C - 101,261-Cell Spartan-6 LX FPGA | AMD
XC6SLX100-N3FG484C

XC6SLX100-N3FG484C - 101,261-Cell Spartan-6 LX FPGA | AMD

The Advanced Micro Devices XC6SLX100-N3FG484C is a Spartan-6 LX field-programmable gate array with 101,261 logic cells, 7,911 configurable logic blocks, and 326 user I/O in a 484-ball BGA package. It combines programmable logic, block RAM, and DSP resources in a single 6-input-LUT FPGA architecture for parallel processing, control, and signal-processing designs. The -3 designation identifies the performance grade, while FG484 identifies the 484-ball package and C identifies the commercial temperature grade. A field-programmable gate array is a programmable digital integrated circuit whose logic fabric, interconnect, and I/O blocks are configured after manufacture. Within the semiconductor hierarchy, an FPGA is an integrated circuit, and the Spartan-6 LX family belongs to AMD's programmable-logic portfolio. Unlike fixed-function ASICs, an FPGA supports parallel hardware pipelines, reusable serial transceivers where applicable, and design updates without fabricating a new mask. The XC6SLX100 provides 101,261 logic elements and 326 I/O, providing substantial parallelism for embedded control, industrial automation, networking, image processing, and communications equipment. Its 7,911 logic blocks organize the LUT fabric into predictable timing and routing regions. The device also incorporates dedicated block RAM and DSP resources for buffering and fixed-point arithmetic, avoiding excessive use of general-purpose LUTs. The -3 speed grade favors higher achievable performance compared with lower-speed Spartan-6 LX options, making it appropriate for pipelines with demanding clock rates. Because FPGA timing depends on architecture placement, clock routing, and I/O standards, timing closure should be verified with the implementation tools specified for the selected Spartan-6 device. Bank-specific supply requirements and configuration-pin constraints must also be checked against the pinout files for the selected package. Typical uses include industrial controllers, video-processing pipelines, data-acquisition systems, embedded storage designs, and communications infrastructure where parallel logic throughput is valuable. The 484-ball BGA footprint also demands careful PCB layout, controlled escape routing, and inspection-aware assembly because fine-pitch balls are difficult to probe or rework after soldering. When planning a new design, confirm that the exact device, temperature grade, package suffix, and configuration method are supported by your toolchain and procurement plan. This page combines package and resource details with replacement guidance, comparison parameters, and PCB-level implementation considerations that help shorten device-selection and hardware-integration work.

Запрос цены Контакты
XC6SLX100-N3FG484I - Industrial Spartan-6 LX FPGA | AMD
XC6SLX100-N3FG484I

XC6SLX100-N3FG484I - Industrial Spartan-6 LX FPGA | AMD

AMD XC6SLX100-N3FG484I is an industrial-grade Spartan-6 LX field-programmable gate array with 101,261 logic cells, 4,824 Kbits of block RAM, 180 DSP48A1 slices, and 326 user I/O in a 484-ball fine-pitch BGA package measuring 23 mm by 23 mm. The -3 speed grade supports high-performance logic implementation, while the industrial temperature designation targets equipment operating across extended temperature conditions. A field-programmable gate array is a semiconductor whose digital logic, interfaces, and parallel processing blocks are configured after fabrication. An FPGA belongs to the programmable-logic hierarchy, which includes complex programmable logic devices and system-on-chip devices. The Spartan-6 LX family combines configurable logic, block RAM, digital signal processing resources, and programmable I/O in a single device, allowing one package to replace combinations of fixed-function logic and support components. The XC6SLX100-N3FG484I provides 15,822 logic slices, 326 user I/O, 4,824 Kbits of block RAM, and 180 DSP48A1 slices. Its integrated memory and DSP resources support parallel data processing, packet handling, signal conditioning, and embedded control. The 484-ball FBGA package provides dense external connectivity without extending beyond the compact 23 mm by 23 mm footprint, while the industrial grade distinguishes it from commercial-temperature variants. The -3 designation identifies the device speed grade within the Spartan-6 LX family. Designers can map parallel algorithms into DSP48A1 slices, buffer data in block RAM, and implement interfaces through configurable I/O. Because an FPGA is programmed rather than fixed at manufacture, the same board platform can support multiple logic configurations when the device, pin constraints, timing, and power targets are compatible. Typical uses include industrial automation, communications equipment, embedded control, video and image processing, network interfaces, and test systems. The 326 available user I/O support multiple buses, clocks, controls, and high-speed interfaces, while the DSP resources are useful for filtering, waveform generation, modulation, and fixed-point arithmetic. The high logic density also permits reduced-component-count implementations compared with discrete programmable logic. PCB design should follow the AMD package pinout and ball-assignment files for the exact 484-ball package. Validate every power rail, decoupling capacitor, configuration interface, clock, and JTAG connection against the manufacturer documentation. Account for BGA assembly requirements, thermal spreading, and signal-integrity routing before releasing the layout for fabrication. This page combines the device identity, package characteristics, family resources, pin-compatible Spartan-6 alternatives, and practical design guidance to support faster component selection and board planning. Engineers should confirm timing, temperature, power, lifecycle, and configuration requirements for the finished equipment before approving any substitution.

Запрос цены Контакты
XC6SLX100T-2CSG484I - Spartan-6 FPGA 101K Logic Cells | AMD
XC6SLX100T-2CSG484I

XC6SLX100T-2CSG484I - Spartan-6 FPGA 101K Logic Cells | AMD

The AMD XC6SLX100T-2CSG484I is a member of the Spartan-6 LXT FPGA family, built on a mature 45nm low-power copper process technology. It delivers 101,261 logic cells and 296 user I/O pins in a 484-ball CSBGA package, offering a balance of density, performance, and low power for high-volume applications. The device operates from a 1.2V core supply and supports a wide range of I/O standards. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the designer after manufacturing, allowing for custom digital logic implementations. FPGAs sit between ASICs and microprocessors in the design hierarchy, providing reconfigurable hardware acceleration for tasks ranging from protocol bridging to digital signal processing. The Spartan-6 family is optimized for cost-sensitive, high-volume applications where low power and system integration are critical. Key features of the XC6SLX100T-2CSG484I include 4,939,776 bits of block RAM, 268 DSP48A1 slices, and support for high-speed serial transceivers (up to 3.125 Gbps) in the LXT variant. The device also includes a hard PCI Express block, memory controllers, and advanced clock management tiles (CMTs) with PLLs and DCMs. These features enable the implementation of complete system-on-chip designs with minimal external components. From a technical perspective, the Spartan-6 family uses a 45nm process that reduces dynamic power consumption by approximately 50% compared to previous Spartan families. The fabric is based on a 6-input look-up table (LUT) architecture, providing efficient logic utilization. The device supports partial reconfiguration, allowing dynamic updates to logic functions without powering down the system. Typical applications include industrial automation, automotive infotainment, medical imaging, and communications equipment. The 296 I/O pins support various standards including LVCMOS, LVDS, and HSTL, making it suitable for interfacing with a wide range of peripherals and memory devices. When designing with this FPGA, careful attention to power supply decoupling and thermal management is essential. The 1.2V core supply should be regulated with low-noise LDOs or switching converters, and the device's power consumption should be estimated using the Xilinx Power Estimator (XPE) tool to ensure adequate cooling.

Запрос цены Контакты
XC6SLX100T-2FG676I Spartan-6 LXT FPGA 101261-Cell
XC6SLX100T-2FG676I

XC6SLX100T-2FG676I Spartan-6 LXT FPGA 101261-Cell

The AMD XC6SLX100T-2FG676I is a Spartan-6 LXT field-programmable gate array with 101,261 logic cells, 376 I/O pins, a 676-pin BGA package, 45 nm CMOS technology, and a 1.2 V core supply. It is designed for applications requiring programmable parallel processing, high I/O density, and deterministic FPGA fabric in a surface-mount package. A field-programmable gate array is a semiconductor device whose logic, interconnect, and digital processing resources are configured after manufacture. The Spartan-6 LXT family combines programmable logic blocks, block RAM, DSP resources, and dedicated input/output resources in one integrated device. This places the XC6SLX100T-2FG676I within the FPGA hierarchy: FPGA, programmable logic device, semiconductor, and embedded digital-processing component. Key features of this device include 101,261 logic cells, 376 available I/O pins, a 676-pin BGA package, and operation from a 1.2 V core supply. Its large I/O count makes it appropriate for systems that need numerous external interfaces, parallel buses, control signals, or high-speed data collection. The 45 nm CMOS implementation provides a mature process technology for programmable-logic designs, while the -2 speed designation identifies a specific performance grade in the Spartan-6 ordering system. The XC6SLX100T-2FG676I combines configurable logic fabric with dedicated digital resources, allowing designers to implement parallel algorithms, protocol controllers, image-processing pipelines, and embedded control functions in one device. The large BGA package supports dense board routing and high pin counts, but it also requires careful PCB layout, plane construction, thermal management, and assembly-process control. Its 676-pin footprint is considerably more demanding than a leaded package or a small quad-flat package. Typical applications include industrial automation, camera and video processing, communications infrastructure, test and measurement equipment, embedded signal processing, and high-speed data-acquisition systems. The device is particularly useful when several parallel data paths, control channels, or memory interfaces must be implemented concurrently. The FPGA architecture also allows design revisions and field updates, which can shorten development cycles compared with a fully custom ASIC. When designing around the XC6SLX100T-2FG676I, confirm the exact pin assignments and board-connection requirements using the AMD Spartan-6 package pinout files. Decoupling, power-plane geometry, BGA assembly rules, and thermal paths should be planned before layout release. Configuration-interface design, clocking, memory connectivity, and I/O voltage compatibility are equally important for reliable implementation. This product page brings together the device identity, package information, design guidance, comparison parameters, and engineering-focused application context. It is intended to help engineers evaluate the Spartan-6 LXT device for high-density programmable logic while keeping footprint, I/O, lifecycle, and sourcing considerations visible.

Запрос цены Контакты
XC6SLX100T-2FG900C - 101K-Cell Spartan-6 LXT FPGA | AMD
XC6SLX100T-2FG900C

XC6SLX100T-2FG900C - 101K-Cell Spartan-6 LXT FPGA | AMD

The AMD XC6SLX100T-2FG900C is a Spartan-6 LXT field-programmable gate array with 101261 logic cells, 498 I/O, a -2 speed grade, and a 900-BBGA package. It uses 45 nm CMOS technology and operates from a 1.2 V core supply, providing a large programmable fabric for high-volume embedded, communications, industrial, and signal-processing systems. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, memory, and I/O behavior can be configured after manufacture. The Spartan-6 LXT family belongs to the broader FPGA and programmable-logic hierarchy, combining configurable logic blocks, block RAM, digital signal processing resources, programmable I/O, and dedicated hard controllers. This makes an FPGA useful when fixed-function ASIC economics are unsuitable or when interfaces, logic, and product requirements are still evolving. The XC6SLX100T-2FG900C provides 101261 logic cells and 498 I/O in a 900-BBGA package. Its 45 nm CMOS implementation and 1.2 V core supply are characteristic of the Spartan-6 generation. The -2 designation identifies its performance grade, while the FG900C ordering code identifies the commercial-temperature, lead-free 900-ball package configuration used in demanding PCB designs. The device belongs to the Spartan-6 LXT family, where LXT models provide a balanced combination of logic resources and connectivity for communication infrastructure, industrial control, test equipment, embedded video, and high-performance signal processing. The 900-BBGA package supports a large pin count but requires a dense, multilayer PCB layout with careful power distribution, decoupling, and thermal engineering. Configuration, clocking, and I/O standards must be checked against the board-level system requirements before release. Typical applications include industrial Ethernet equipment, high-speed data acquisition, embedded control systems, network packet processing, test-and-measurement platforms, and parallel digital interfaces. The 498 available I/O sites make the device especially useful for systems requiring substantial external connectivity while retaining programmable logic for protocol handling, filtering, control, or data transformation. PCB implementation should treat this FPGA as a high-pin-count mixed-signal and digital component. Use the manufacturer's package and pinout documentation to assign every power, ground, configuration, clock, and user I/O connection. Place decoupling capacitors close to the relevant supply pins, provide clean clock routing, and use the recommended ball-assignment and layer-transition guidance for high-speed interfaces. This product page combines the verified Spartan-6 LXT device specifications, package details, sourcing information, and same-footprint alternatives with practical guidance for design engineers evaluating FPGA density, timing grade, thermal margin, PCB complexity, and long-term configuration support.

Запрос цены Контакты
XC6SLX100T-2FG900I - 101,261-Cell Spartan-6 LXT FPGA | AMD
XC6SLX100T-2FG900I

XC6SLX100T-2FG900I - 101,261-Cell Spartan-6 LXT FPGA | AMD

The AMD XC6SLX100T-2FG900I is a Spartan-6 LXT field-programmable gate array with 101,261 logic cells, 7,911 configurable logic blocks, 498 user I/O pins, and 4,939,776 RAM bits, housed in a 900-ball FBGA package measuring 31 mm by 31 mm. It operates from a 1.14 V to 1.26 V core-supply range and is specified for an industrial junction-temperature range of -40°C to 100°C. A field-programmable gate array is a programmable digital logic device within the FPGA and CPLD product hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic, block RAM, dedicated arithmetic resources, and programmable I/O in one semiconductor package. This flexibility makes the Spartan-6 LXT family useful when product requirements evolve, prototypes must be shortened, or parallel digital functions need consolidation into a single device. The XC6SLX100T-2FG900I provides substantial design capacity through 101,261 logic cells distributed across 7,911 logic blocks. Its 4,939,776 bits of block RAM support buffering, packet storage, and moderate data-plane functions, while 498 user I/O pins provide extensive connectivity for external memory, clocks, serial links, control signals, and parallel buses. The -2 speed designation identifies the device's performance grade within the Spartan-6 LXT family. The device is manufactured using a 45 nm CMOS process and belongs to the Spartan-6 LXT family, which combines programmable logic with high-speed serial transceiver resources. Its architecture allows clocked logic, DSP-oriented processing, embedded memory, and programmable I/O to share one package. Designers must still confirm speed-grade, temperature-grade, voltage, and pinout requirements for each exact device ordering code before releasing production hardware. Typical uses include industrial control and automation, networking and communications equipment, embedded video processing, test and measurement systems, robotics, and high-density digital signal-processing implementations. The 498 I/O pins are particularly useful for board designs requiring substantial external connectivity, while the large logic and RAM resources support parallel datapaths that would otherwise require multiple programmable devices. A 900-ball FBGA demands careful PCB layout, especially for power delivery, ground-plane continuity, high-speed clock routing, and controlled-length interfaces. Follow the AMD Spartan-6 package and PCB design guidance for ball assignment, layer stack-up, via-in-pad practices, decoupling, and assembly constraints. Validate the complete design with the intended ISE Design Suite implementation flow and timing constraints for the selected -2 speed grade. This page combines device specifications, same-package replacement options, application guidance, and PCB-focused design notes into an engineering-oriented overview of the XC6SLX100T-2FG900I. It is intended to help designers confirm logic capacity, memory, I/O, package, thermal grade, and lifecycle considerations before component selection and schematic capture.

Запрос цены Контакты
XC6SLX100T-3FG676I - 101261-Cell Spartan-6 FPGA | AMD
XC6SLX100T-3FG676I

XC6SLX100T-3FG676I - 101261-Cell Spartan-6 FPGA | AMD

The AMD XC6SLX100T-3FG676I is a Spartan-6 LXT field-programmable gate array with 101,261 logic cells, 376 I/Os, a 400 MHz internal frequency, and a 676-pin FBGA package. It operates from 1.14 V to 1.26 V and uses 45 nm CMOS technology, combining programmable logic, block RAM, DSP resources, dedicated clocking, and differential I/O in one device. A field-programmable gate array is a programmable-logic semiconductor whose digital functions are configured after manufacture. The Spartan-6 LXT family extends the Spartan-6 FPGA architecture with logic, memory, DSP, and high-speed serial transceiver resources for cost-sensitive embedded systems. Within the product hierarchy, an FPGA is a semiconductor, programmable-logic device, and parallel configurable IC. Key features include 7,911 configurable logic blocks, 376 user I/Os, 45 nm CMOS construction, and integrated DCM and PLL resources. The -3 speed designation identifies the family's highest-performance listed speed grade. Its 1.14 V to 1.26 V core-voltage range and 1 mm FBGA pitch support compact, high-density PCB designs while requiring careful power integrity and thermal planning. The device integrates programmable logic with dedicated hardware for clock management and signal processing, reducing reliance on external components in suitable designs. Its 376 I/Os support communication, memory, control, and general-purpose digital interfaces. Configuration data determines the implemented circuit, allowing one board design to support multiple firmware or hardware personalities. Exact configuration, memory, and transceiver details should be confirmed against the ordering-code-specific manufacturer documentation. Typical applications include industrial control, embedded video processing, communications infrastructure, instrumentation, and high-speed digital bridges. The FPGA is especially useful when parallel logic, deterministic timing, flexible I/O, and product-lifecycle flexibility matter more than the power efficiency of an ASIC. It can consolidate multiple fixed-function ICs while retaining field-upgradeability through bitstream replacement. PCB design should account for the 676-pin FBGA geometry, high pin count, and dense power-distribution requirements. Provide clean core and I/O supply planes, decouple each supply domain near the device, route configuration interfaces away from sensitive signals, and follow the manufacturer's ball-grid-array layout and thermal recommendations. Validate power sequencing, signal integrity, and junction-temperature margins across the intended bitstream and environmental range.

Запрос цены Контакты
XC6SLX100T-3FG900I - 101261-Cell Spartan-6 FPGA | AMD
XC6SLX100T-3FG900I

XC6SLX100T-3FG900I - 101261-Cell Spartan-6 FPGA | AMD

The AMD XC6SLX100T-3FG900I is a Spartan-6 LXT field-programmable gate array with 101,261 logic cells, 45 nm fabrication technology, 1.2 V core operation, and a 900-pin fine-pitch ball grid array package. It provides 498 user I/O positions and integrates logic, block RAM, DSP, high-speed serial transceivers, and PCI Express resources in one programmable device. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic and interconnections are configured after manufacture. The Spartan-6 FPGA family occupies the FPGA -> programmable logic -> semiconductor hierarchy. Compared with application-specific processors, an FPGA combines parallel hardware processing, deterministic interfaces, and reconfigurable architectures. Compared with lower-capacity programmable logic devices, the XC6SLX100T provides substantially more logic and dedicated arithmetic resources for embedded systems requiring high integration. The XC6SLX100T-3FG900I includes 101,261 logic cells, 15,822 adaptive logic modules, 126,576 registers, 4,824 Kbit of block RAM, and 360 18-by-18 multipliers. Its dedicated DSP resources total 180 slices, supporting parallel filtering, fixed-point arithmetic, and digital signal-processing pipelines. Eight high-speed transceivers operate up to 3.2 Gbps, while one PCI Express block adds a dedicated high-speed interface resource. The device is manufactured on a 45 nm process and uses a 1.2 V core supply. Its 900-pin FBGA package exposes 498 user I/O positions and is intended for surface-mount assembly on multilayer printed circuit boards. The -3 suffix identifies the performance grade, while the I suffix identifies the industrial temperature option. The associated device information lists an operating range of -40 °C to +100 °C for the industrial-grade variant. Typical uses include industrial control, networking equipment, embedded vision, communications infrastructure, test and measurement, and signal-processing systems. The large logic count supports parallel datapaths, the DSP slices accelerate multiply-accumulate operations, and the transceivers support high-speed serial links. The PCI Express block can be valuable in embedded host, accelerator, and industrial communication designs where a dedicated serial interface is preferable to a soft interface alone. PCB design requires careful power, thermal, and signal-integrity planning around the 900-ball FBGA. Differential and high-speed transceiver routes need controlled impedance, continuous reference planes, and minimized return-path discontinuities. Decoupling, core and auxiliary power sequencing, via-in-pad or via- fanout, and thermal spreading should be reviewed against the manufacturer’s Spartan-6 implementation guidance before release. This product overview combines the device’s logic, memory, DSP, transceiver, package, and temperature characteristics with drop-in replacement analysis, selection guidance, and practical PCB-design considerations for engineers evaluating the XC6SLX100T-3FG900I.

Запрос цены Контакты
XC6SLX100T-3FGG484C - Spartan-6 FPGA 101K Logic Cells | AMD
XC6SLX100T-3FGG484C

XC6SLX100T-3FGG484C - Spartan-6 FPGA 101K Logic Cells | AMD

The AMD XC6SLX100T-3FGG484C is a member of the Spartan-6 LXT family of Field Programmable Gate Arrays (FPGAs), built on a mature 45 nm low-power copper process technology. It delivers 101,261 logic cells, 296 user I/O pins, and 4,939,776 bits of block RAM, all in a 484-ball FBGA package. This device is designed for high-volume applications requiring leading system integration with the lowest total cost, offering half the power consumption of previous Spartan families and faster, more comprehensive connectivity. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence 'field-programmable'. FPGAs are part of the broader category of programmable logic devices (PLDs), which sit between application-specific integrated circuits (ASICs) and general-purpose processors in the semiconductor hierarchy. They consist of an array of programmable logic blocks, interconnects, and I/O blocks, allowing designers to implement custom digital logic circuits without the high NRE costs of ASIC development. FPGAs are widely used in prototyping, aerospace, automotive, industrial, and communications applications where flexibility and time-to-market are critical. Key features of the XC6SLX100T-3FGG484C include 101,261 logic cells, 296 user I/O pins, 4,939,776 bits of block RAM, and support for various I/O standards including LVCMOS, LVDS, and HSTL. The device operates from a 1.2V core voltage and is available in the -3 speed grade, which is the fastest speed grade for this part. The 484-ball FBGA package measures 23x23 mm with a 1.0 mm ball pitch, providing a compact footprint for dense PCB designs. The device also includes advanced clock management tiles (CMTs) with PLLs and DCMs, and supports configuration via JTAG, SPI, and BPI interfaces. From a technical depth perspective, the Spartan-6 family is built on a 45 nm low-power copper process, which balances performance and power efficiency. The LXT variant includes high-speed serial transceivers (up to 3.125 Gbps), PCI Express endpoints, and advanced memory controllers, making it suitable for high-bandwidth applications. The device also features dedicated DSP48A1 slices for digital signal processing, providing up to 180 GMACs of performance. The -3 speed grade offers the highest performance, with maximum clock frequencies typically exceeding 400 MHz for internal logic. Typical applications for the XC6SLX100T-3FGG484C include software-defined radio (SDR), industrial motor control, medical imaging, and high-performance computing acceleration. Its combination of logic density, I/O count, and transceiver capabilities makes it ideal for bridging, protocol conversion, and real-time signal processing tasks. The device is also well-suited for aerospace and defense applications where long-term supply and traceability are required. When designing with this FPGA, careful attention must be paid to power supply decoupling and PCB layout. The core voltage (VCCINT) should be regulated at 1.2V with low-noise LDOs or switching regulators, and each power pin should have a 100 nF ceramic capacitor placed as close as possible. Additionally, the configuration bitstream must be stored in an external SPI flash or programmed via JTAG, and the device supports multi-boot for remote updates.

Запрос цены Контакты
XC6SLX150-2FG484C Spartan-6 LX FPGA | AMD Xilinx
XC6SLX150-2FG484C

XC6SLX150-2FG484C Spartan-6 LX FPGA | AMD Xilinx

The AMD Xilinx XC6SLX150-2FG484C is a Spartan-6 LX field-programmable gate array with 338 I/O, 147,443 configuration cells, 11,519 configurable logic blocks, and a 667 MHz internal frequency, housed in a 484-ball CSBGA package measuring 19 x 19 mm with a 0.80 mm pitch. The -2 speed grade targets a practical balance between logic capacity, performance, and power consumption for embedded digital systems. A field-programmable gate array is a programmable digital semiconductor used to implement custom combinational and sequential logic. Its hierarchy extends from FPGA to programmable logic device, digital integrated circuit, and semiconductor. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reconfigured after manufacture, allowing hardware logic, parallel processing, interfaces, and protocol behavior to be updated without changing the printed circuit board. Key features include 338 user I/O, 11,519 configurable logic blocks, 147,443 logic cells, and an internal frequency rated at 667 MHz. The -2 designation identifies the middle Spartan-6 performance grade, while the commercial-temperature suffix supports operation from 0°C to 85°C. Its 484-ball chip-scale BGA package also supports dense PCB routing in systems where a large I/O count is more important than a simple leaded-package footprint. The architecture combines configurable logic blocks with dedicated resources for interconnect, memory, and programmable I/O. This allows parallel datapaths, control logic, serial interfaces, and timing-sensitive functions to coexist in one device. The 667 MHz figure characterizes the device's internal operating frequency and should not be interpreted as the guaranteed performance of every user design; actual throughput also depends on the selected logic path, I/O standard, speed grade, timing constraints, and implemented function. Typical applications include industrial control, test-and-measurement equipment, communications infrastructure, embedded imaging, signal processing, and general-purpose embedded control. The 338 I/O count is particularly useful when the design connects multiple buses, parallel converters, memory interfaces, control signals, or differential communication links without using a separate large pin-count companion device. For PCB implementation, use the AMD Spartan-6 package pinout files when assigning BGA balls and routing the board. Confirm the selected I/O voltage, bank power requirements, decoupling, thermal performance, and configuration interface before release. Device replacement should account for the complete ordering code because speed-grade, temperature-grade, package, and lead-free suffixes affect qualification and behavior. This page combines the XC6SLX150-2FG484C specifications, same-package replacement options, application guidance, and practical FPGA design considerations in one engineering-oriented reference. It also distinguishes the Spartan-6 LX resource level from the electrical, thermal, and ordering differences that determine whether a candidate is a true board-level replacement.

Запрос цены Контакты
XC6SLX150-2FG484I - 147443-Cell Spartan-6 FPGA | AMD
XC6SLX150-2FG484I

XC6SLX150-2FG484I - 147443-Cell Spartan-6 FPGA | AMD

The AMD XC6SLX150-2FG484I is a Spartan-6 LX field-programmable gate array with 147,443 logic cells, 4,939,776 RAM bits, 338 I/O, and a 484-ball BGA package. Its -2 speed grade targets a 667 MHz internal operating frequency, while the FG484 package supports dense programmable-logic and general-purpose I/O requirements in surface-mount systems. A field-programmable gate array is a reconfigurable digital semiconductor containing programmable lookup logic, programmable interconnect, block RAM, and dedicated I/O resources. Within the broader hierarchy, an FPGA is a programmable logic device that sits above simple fixed-function logic ICs and below application-specific programmable devices. Spartan-6 LX devices combine programmable logic, embedded memory, digital signal processing resources, and high-speed I/O in one integrated silicon package. The XC6SLX150-2FG484I provides 11,519 logic cells as identified in the package description, 147,443 total logic elements, and 4,939,776 bits of RAM. Its 338 I/O allow external interfaces to connect processors, memories, communications transceivers, sensors, displays, and industrial equipment. The device uses a nominal core supply range of 1.14 V to 1.26 V, while supporting circuitry determines the appropriate I/O voltage for the selected bank configuration. The -2 suffix identifies the device speed grade, which must be considered during timing closure rather than treated as a software feature. Spartan-6 designs rely on AMD development tools for synthesis, implementation, timing analysis, programming, and debug. Engineers should preserve the electrical, mechanical, and pinout characteristics of the FG484 package when upgrading an existing board or adapting a proven design. Typical applications include industrial control, test and measurement, networking equipment, embedded vision, communications infrastructure, and high-density embedded systems. The combination of 147,443 logic cells and 4,939,776 RAM bits supports parallel data processing, protocol handling, control logic, buffering, and interface bridging without requiring multiple programmable devices. Design attention should focus on bank voltage compatibility, clock requirements, decoupling, thermal performance, and differential-pair routing. Confirm the pinout against the official Spartan-6 package files and complete static timing analysis for the -2 speed grade before releasing a PCB or production bitstream. This product page consolidates package-specific logic, memory, I/O, and device-selection details with practical application guidance. It also distinguishes package-compatible Spartan-6 ordering variants by speed grade, temperature grade, and device type so engineers can identify a replacement without overlooking timing or I/O differences.

Запрос цены Контакты
XC6SLX150-2FG676I - 147443-Cell Spartan-6 FPGA | AMD
XC6SLX150-2FG676I

XC6SLX150-2FG676I - 147443-Cell Spartan-6 FPGA | AMD

AMD XC6SLX150-2FG676I is a Spartan-6 LX field-programmable gate array with 147,443 logic cells, a 498-I/O interface, and a 676-pin FCBGA package. It uses 45 nm CMOS technology and is identified as a 1.2 V device in the Spartan-6 LX family. The -2 speed grade places it in the middle of the available performance range, while the -2FG676I ordering code identifies the industrial-temperature configuration. A field-programmable gate array is a semiconductor whose digital logic, memory blocks, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic cells and fixed-function blocks into an application-specific parallel-processing system. This makes the device useful when multiple parallel channels, high-speed interfaces, or programmable control logic must be consolidated into one component. The XC6SLX150 provides 147,443 logic cells, 498 I/O, and a 45 nm CMOS implementation. Its -2 speed grade supports a middle-performance design point for industrial systems, while its 1.2 V core supply corresponds to the family's stated supply architecture. The 676-pin FCBGA package supports dense PCB routing and is suited to multilayer boards where fine-pitch escape routing and ground-plane continuity require careful layout planning. Spartan-6 LX devices are designed for configurable embedded systems, industrial control, communications, signal processing, and test equipment. Programmable architecture allows firmware-driven changes to logic behavior, interface timing, and parallel processing pipelines without changing the PCB. The large I/O count also permits simultaneous connections to external converters, memories, transceivers, and control peripherals when board-level pin planning supports the device. Potential uses include industrial data-acquisition systems, programmable logic controllers, video and image-processing front ends, communications gateways, and embedded control platforms. In these applications, the device can consolidate deterministic parallel logic while dedicated companion processors handle operating-system software, networking, or supervisory functions. PCB design requires strict attention to the 19 mm by 19 mm package geometry and 0.80 mm ball pitch. Use the AMD Spartan-6 package pinout files to assign every pin, place decoupling and configuration resources close to their associated balls, and preserve a continuous return path beneath high-speed and clock nets. Configuration, power sequencing, and thermal management must be validated against the manufacturer design guidance. This page combines the device identity, package characteristics, family-level alternatives, comparison parameters, and practical implementation guidance. It helps engineers evaluate the XC6SLX150-2FG676I for dense programmable-logic designs while separating verified device facts from parameters that must be confirmed against the complete manufacturer datasheet.

Запрос цены Контакты
XC6SLX150-2FGG676I - 147k-Cell Spartan-6 FPGA | AMD
XC6SLX150-2FGG676I

XC6SLX150-2FGG676I - 147k-Cell Spartan-6 FPGA | AMD

The AMD XC6SLX150-2FGG676I is a Spartan-6 LX field-programmable gate array with 147,443 logic cells, 4,939,776 RAM bits, 498 I/O, and a 667 MHz internal frequency, packaged in a 676-BGA. It combines programmable logic, DSP, block RAM, and dedicated I/O resources in a cost-sensitive FPGA platform for high-volume embedded systems. A field-programmable gate array, or FPGA, is a programmable digital semiconductor whose logic, memory, and signal-processing blocks can be configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor. The Spartan-6 LX family combines configurable logic with block RAM, digital signal processing resources, and parallel I/O, making it suitable for embedded control, communications, industrial automation, and custom hardware acceleration. The device provides 11519 configurable logic blocks, 147,443 logic cells, 498 I/O, and 4,939,776 RAM bits. Its 676-BGA package provides 498 signal connections, while the -2 speed grade targets a balance between performance and power consumption. The core supply range of 1.14 V to 1.26 V supports integration with standard Spartan-6 power architectures and external I/O voltage management. The Spartan-6 architecture supports programmable logic, block RAM, dedicated DSP resources, and clock-management functions within one device. Its 45 nm CMOS implementation and broad I/O count allow a single FPGA to consolidate control logic, parallel data acquisition, communications interfaces, and hardware accelerators. Designers must still account for pin-bank voltage limits, clocking constraints, power budgeting, and configuration requirements when planning the board. Typical applications include industrial automation controllers, communications equipment, embedded video and image processing, data-acquisition systems, and custom accelerator boards. The 498 I/O count is particularly useful for parallel buses and high-pin-count peripheral interfaces, while the 4,939,776 RAM bits support buffering, packet processing, and local data storage. A critical design consideration is verifying every pin assignment and I/O standard against the AMD Spartan-6 package pinout. The 676-BGA also requires careful PCB layout, adequate thermal management, clean power rails, and a supported configuration scheme. Always confirm that the selected alternative has the same package, speed grade requirements, temperature designation, and memory requirements. This page combines the device's principal resource and packaging details with engineering-focused alternatives, application guidance, comparison parameters, and practical PCB considerations to support faster component selection and design-in decisions.

Запрос цены Контакты
XC6SLX150-3FG484C - 147443-Cell FPGA | AMD | Industrial
XC6SLX150-3FG484C

XC6SLX150-3FG484C - 147443-Cell FPGA | AMD | Industrial

The AMD XC6SLX150-3FG484C is a Spartan-6 LX field-programmable gate array with 147,443 logic cells, 338 I/O connections, a 667 MHz internal frequency, and a 484-ball BGA package. Built on 45 nm CMOS technology with a 1.2 V supply, it combines programmable logic, 11,519 configurable logic blocks, block RAM, and digital signal processing resources in a single device. The -3 speed grade provides the highest performance option identified for the Spartan-6 LX family. An FPGA is a programmable semiconductor used to implement digital logic, interface protocols, control systems, and parallel processing functions. Its configurable architecture contains programmable interconnect and logic resources that can be configured after manufacture. This places the FPGA within the broader hierarchy of programmable logic devices, digital semiconductors, and embedded control hardware, while distinguishing it from fixed-function logic ICs and application-specific processors. The principal features of the XC6SLX150-3FG484C include 147,443 logic cells, 11,519 configurable logic blocks, 338 I/O, and a 667 MHz internal frequency. Its 45 nm CMOS construction and 1.2 V core supply support dense designs requiring substantial parallel logic. The commercial-temperature suffix C supports operation from 0°C to 85°C, while the lead-free 19 mm by 19 mm CSBGA package is intended for compact surface-mount assemblies. The Spartan-6 LX architecture provides a balance of programmable logic, dedicated block RAM, digital signal processing resources, and general-purpose I/O. Designers can implement communication links, control logic, instrumentation front ends, image-processing pipelines, and embedded accelerators without relying on a fixed instruction set. A 484-ball package offers dense routing access, but it requires careful PCB escape routing, via-in-pad or fanout strategies, and controlled assembly conditions for reliable manufacturing. Typical uses include industrial automation, communications infrastructure, test and measurement equipment, embedded video processing, and high-density control systems. The 338 available I/O are particularly useful for parallel interfaces, while the large logic capacity allows multiple independent processing pipelines or control domains to share one programmable device. The 667 MHz internal figure is a device timing characteristic rather than a guarantee that every implemented circuit will run at that frequency. Designers should prioritize the AMD Spartan-6 package pinout files when assigning BGA balls and planning PCB escape routing. Power, ground, configuration, clock, and user-I/O connections must be mapped against the exact device and package files. Decoupling, clock jitter, signal integrity, thermal dissipation, and configuration-boot requirements should be reviewed before schematic and layout release. This page combines exact device characteristics with practical package-planning guidance, configuration considerations, same-package alternatives, and an engineering-oriented comparison. It helps designers determine whether the XC6SLX150-3FG484C fits a design before committing to a 484-ball BGA layout and high-speed FPGA implementation.

Запрос цены Контакты
XC6SLX150-3FG484I - 147443-LE Spartan-6 FPGA | AMD
XC6SLX150-3FG484I

XC6SLX150-3FG484I - 147443-LE Spartan-6 FPGA | AMD

AMD XC6SLX150-3FG484I is a Spartan-6 LX field-programmable gate array with 147,443 logic cells, 338 I/O, and a -3 performance grade in a 484-ball CSBGA package. It operates from a 1.2 V core supply, reaches an internal frequency of 667 MHz, and is specified for the 0 to 85 °C industrial temperature range. The package measures 19 × 19 mm with a 0.80 mm ball pitch. A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor containing programmable logic, memory, and input/output resources. FPGAs sit above fixed-function logic devices in the implementation hierarchy because designers can alter the interconnect and function of the same physical device by loading a new bitstream. Spartan-6 devices combine this reconfigurable architecture with block RAM, digital signal processing resources, clock management, and high-speed serial transceivers. The XC6SLX150-3FG484I is suited to designs requiring substantial parallel logic and programmable I/O. Its 147,443 logic cells provide substantial capacity for control logic, interface bridging, signal processing, and embedded protocol handling. The 338 I/O support flexible connection to memory, displays, communications equipment, industrial controllers, and test systems. A 667 MHz internal figure reflects the speed class of the device, while the -3 suffix identifies the highest-performance Spartan-6 LX speed grade. The device is manufactured using 45 nm CMOS technology and belongs to the Spartan-6 LX family. Its 484-ball package concentrates a high pin count into a compact surface-mount footprint, but it also requires careful PCB layout, controlled escape routing, and careful power-delivery design. Configuration and programming depend on the selected bitstream and board-level programming method, so engineers should evaluate boot configuration, JTAG access, and power sequencing before releasing the PCB layout. Typical applications include industrial automation, communications infrastructure, instrumentation, embedded control, video-processing pipelines, and high-speed interface aggregation. The 338 I/O are useful for parallel sensor acquisition and legacy peripheral control, while the high logic-cell count supports multiple independent digital subsystems. Industrial equipment benefits from the specified 0 to 85 °C operating range, provided the board layout maintains acceptable junction temperature. A principal design consideration is that the 484-ball package requires dense escape routing and multiple supply connections. Use the AMD Spartan-6 package pinout files to assign every ball correctly, and follow the manufacturer’s power, decoupling, and configuration guidance before fabrication. Confirm the exact I/O standard, voltage tolerances, and bank constraints against the selected design constraints. This product page combines package, logic-resource, speed-grade, and temperature information with practical configuration guidance and same-family drop-in alternatives. It is intended to accelerate engineering selection while keeping the distinction between verified device attributes, package constraints, and application-specific design requirements clear.

Запрос цены Контакты