Интегральные схемы

Подкатегории

📁 АЦП/ЦАП 3.100+ товаров 📁 Микросхемы усилителей 1.900+ товаров 📁 Аудиокодеки 18 товаров 📁 Аудио ИС 2 товаров 📁 Тактирование и синхронизация 660+ товаров 📁 Comparator ICs 1 товаров 📁 DSP 1.100+ товаров 📁 ИС сбора данных 2 товаров 📁 Цифровые потенциометры 4 товаров 📁 Драйверы и контроллеры дисплеев 1 товаров 📁 FPGA и CPLD 7.300+ товаров 📁 Интерфейсные ИС 3.300+ товаров 📁 Драйверы светодиодов 1 товаров 📁 Логические микросхемы 460+ товаров 📁 Микросхемы памяти 870+ товаров 📁 Микроконтроллеры 20.000+ товаров 📁 Микропроцессоры 4 товаров 📁 Драйверы двигателей 1 товаров 📁 Прочее 1 товаров 📁 Sensor and Detector Interfaces 1 товаров 📁 Специализированные ИС 15 товаров 📁 Видео ИС 14 товаров

Товары (39.000+)

CYUSB3328-88LTXI - HX3 USB 3.0 8-Port Hub Controller | Infineon
CYUSB3328-88LTXI

CYUSB3328-88LTXI - HX3 USB 3.0 8-Port Hub Controller | Infineon

The Infineon CYUSB3328-88LTXI is a USB 3.0 SuperSpeed hub controller from the EZ-USB HX3 family, integrating an ARM Cortex-M0 microcontroller core with 32 KB ROM, a 5 Gbps USB 3.0 PHY, and an 88-pin VFQFN exposed-pad package. The device delivers four downstream USB 3.0 ports plus a USB 3.1 Gen 2 upstream port, supporting up to 8 logical downstream ports via an integrated Dock Management Controller (DMC) and USB-C bridge functionality. Native battery-charging support includes USB Power Delivery 3.0, Battery Charging v1.2, and Apple Charging signatures. What is a USB hub controller? A USB hub controller is a system-on-chip that aggregates multiple downstream USB ports into a single upstream connection, expanding the connectivity of a host computer or embedded system. Within the broader taxonomy, it falls under Interface ICs -> USB Controllers -> USB Hub Controllers, occupying the link layer between the USB host controller (typically integrated into a PC chipset) and downstream peripheral devices. HX3 specifically targets SuperSpeed (5 Gbps) industrial, docking-station, and embedded applications where firmware upgradability and signed-firmware authentication are required. Key features of the CYUSB3328-88LTXI include: 5 Gbps USB 3.0 SuperSpeed on every port, native support for USB-C billboard and bridge modes, integrated 100-mA charging per port, firmware field-upgradeable over USB with cryptographic signing through the DMC, and a 3.0V to 3.6V single-supply operation. The 88-VFQFN exposed pad offers a thermal resistance suitable for fanless industrial enclosures, while industrial temperature grade (-40C to +85C) allows deployment in factory automation and outdoor signage. Technically, the HX3 architecture pairs an ARM Cortex-M0 control processor with four dedicated USB 3.0 physical layers and a shared USB 2.0 high-speed hub block. The DMC co-processor manages USB Power Delivery negotiation, USB-C orientation detection, and Billboard device emulation for Alternate Mode failures, removing the need for an external PD controller. Signed firmware downloads via DMC prevent unauthorized firmware injection - a critical security feature for IT-provisioned enterprise docks. Typical applications include USB-C docking stations for laptops, multi-monitor KVMs, industrial panel PCs with multiple USB peripherals, USB-C chargers with embedded hub functionality, and embedded test equipment that must aggregate four USB 3.0 cameras or storage devices. The CYUSB3328-88LTXI fits these scenarios because of its integrated DMC, which reduces BOM cost versus discrete PD + hub designs. Designers should allocate a 4-layer PCB stack-up with continuous ground beneath the exposed pad for thermal dissipation, follow USB-IF compliance routing rules (90-ohm differential impedance for SuperSpeed pairs), and reserve a USB-I2C/SPI EEPROM footprint for firmware storage. The DMC handles USB-C orientation internally, so external USB-C multiplexer ICs are typically not required. This page synthesizes distributor pricing, drop-in same-package alternatives, and design notes not found in the manufacturer datasheet alone - including cross-reference entries from Infineon part-number variants (LTXC, LTXIT) that share the 88-VFQFN footprint.

Запрос цены Контакты
D32.31301S.001 - 32GB DDR5-4800 ECC UDIMM | Apacer Memory
D32.31301S.001

D32.31301S.001 - 32GB DDR5-4800 ECC UDIMM | Apacer Memory

The Apacer Memory America D32.31301S.001 is a 32 GB DDR5 SDRAM 288-pin unbuffered ECC DIMM module rated at DDR5-4800 (PC5-38400) with CL40 latency and 1.1 V nominal supply. The module is built from twenty 2G x 8-bit DDR5 synchronous DRAMs in FBGA packages plus an 8 Kbit serial presence detect EEPROM, delivering registered-grade reliability in a UDIMM form factor. DDR5 SDRAM is the fifth-generation Double Data Rate Synchronous DRAM standard that doubles the per-pin bandwidth of DDR4 by using on-die ECC, decision feedback equalization (DFE), and a 32-bit channel architecture with separate CA/CS sub-channels. A DIMM (Dual In-Line Memory Module) is a printed circuit board that carries SDRAM chips and plugs into a host board memory socket; UDIMM variants omit the register/buffer and are the standard form factor for workstations and servers that do not require fully buffered modules. The D32.31301S.001 fits the ECC UDIMM sub-category, adding parity-style error correction that is critical for server workloads and EEC-aware workstation platforms. Key features include the DDR5-4800 data rate (4800 MT/s, equivalent to 38.4 GB/s per module theoretical bandwidth), CL40 CAS latency, 288-pin UDIMM edge connector with 1.1 V VDD / 1.8 V VPP operation, and the on-module 8 Kbit SPD EEPROM that enumerates JEDEC-compliant timings to the system BIOS at power-on. The 288-pin UDIMM form factor follows the JEDEC MO-309A mechanical outline, allowing the module to be installed in any DDR5 UDIMM socket that supports ECC. The module follows the JEDEC DDR5 standard (JESD79-5) for SDRAM protocol, command/address topology, and PMIC integration. Apacer's industrial-grade screening and the SA-HF (solder assembly, halogen-free) designation indicate compliance with RoHS 2.0 and halogen-free PCB requirements, while the 1.1 V nominal operation reduces module power versus DDR4's 1.2 V supply, despite the doubled bandwidth. Typical applications include server-class workstation memory upgrades, edge-computing appliances, single-socket server boot/main memory banks, virtualization hosts, in-memory database workloads, and ECC-required development platforms. The 32 GB density is a sweet spot for workloads that exceed 16 GB but do not need full 64 GB+ populations. Design considerations include host platform DDR5 UDIMM socket validation, BIOS SPD recognition of the Apacer vendor ID, and case-by-case thermal profiling: modules running sustained DDR5-4800 with ECC error correction can dissipate 6-9 W per module and benefit from chassis airflow. This page synthesizes distributor pricing, drop-in cross-vendor DDR5 ECC UDIMM alternatives, and practical platform-compatibility guidance not bundled in the Apacer datasheet.

Запрос цены Контакты
D32.35303H.001 - 32GB DDR5 ECC UDIMM 5600 VLP | Apacer
D32.35303H.001

D32.35303H.001 - 32GB DDR5 ECC UDIMM 5600 VLP | Apacer

The Apacer D32.35303H.001 is a 32 GB DDR5 SDRAM ECC unbuffered DIMM (UDIMM) operating at 5600 MT/s with CL46 timing in a Very Low Profile (VLP) form factor. The module is built from twenty 2G x 8-bit DDR5 synchronous DRAMs in FBGA packages combined with a serial presence detect (SPD) EEPROM of 8 Kbits, and is intended to mount into a standard 288-pin connector socket. Apacer VLP UDIMMs are targeted at 1U server chassis and space-constrained embedded platforms that demand ECC-grade reliability. A DDR5 SDRAM module is a synchronous dynamic random-access memory module built to the JEDEC DDR5 specification. Within the system memory hierarchy, DDR5 sits above LPDDR5 (mobile) and below HBM (high-bandwidth memory), delivering roughly double the per-pin transfer rate of DDR4 while reducing the per-channel voltage from 1.2 V to 1.1 V. As ECC (Error-Correcting Code) memory, it adds single-bit error correction to mainstream server-class reliability, addressing multi-bit soft errors common in densified DRAM arrays. The 288-pin UDIMM form factor is the standard desktop/workstation DIMM, distinguishable from RDIMMs by its lack of a register clock driver, allowing lower latency at the cost of reduced maximum rank count per channel. Key features of the D32.35303H.001 include 32 GB density, 5600 MT/s data rate (PC5-44800), CL46 CAS latency, on-module voltage regulation via a 12V-to-1.1V PMIC, ECC for single-bit error correction, and a halogen-free VLP height that fits 1U server chassis. The 2048x8 DRAM organization (twenty 2Gx8 devices) provides x8 data width with ECC bits distributed across the DRAM array. The Hynix die suffix indicates the underlying memory supplier. In use, this module is recommended for single-CPU workstations, edge servers, and industrial PCs that need ECC error correction without paying the latency penalty of registered memory. The 5600 MT/s speed places it at the high end of mainstream DDR5 server-class throughput, suitable for virtualization hosts, in-memory databases, and content-creation workstations handling 4K/8K media. When designing with VLP UDIMMs, confirm the chassis DIMM slot height: standard VLP modules measure 18.3 mm tall (versus 31.25 mm for full-height DIMMs). Older chassis with tall heatsink shrouds may not accept VLP modules. The on-module PMIC requires the host 12V rail to remain within ±5% tolerance. This page synthesizes distributor pricing, parametric comparisons against ECC UDIMM alternates, and practical compatibility guidance drawn from the JEDEC DDR5 specification and Apacer VLP UDIMM family documentation not consolidated in any single distributor listing.

Запрос цены Контакты
DA28F320J5A120 - 32Mbit StrataFlash 5V 120ns 56-SSOP | Intel
DA28F320J5A120

DA28F320J5A120 - 32Mbit StrataFlash 5V 120ns 56-SSOP | Intel

The Intel DA28F320J5A120 is a 32-Mbit (4 MB / 2 Mwords) 5-Volt Intel StrataFlash memory organized as 4M x 8 / 2M x 16, packaged in a 56-pin SSOP with 120 ns read access time and symmetric 128-Kbyte erase blocks. It is part of Intel's high-density symmetrically-blocked StrataFlash family, delivering CFI-compatible command set support and enhanced data protection features. StrataFlash memory is a type of NOR flash technology that stores two bits per cell (multi-level cell, MLC) by using multiple voltage levels in each floating gate, enabling higher density than traditional single-bit-per-cell NOR flash while preserving the byte-erasability and random-read characteristics that make NOR flash suitable for code storage and execute-in-place (XIP) applications. StrataFlash belongs to the non-volatile memory hierarchy under flash memory, which itself sits under memory ICs and integrated circuits in modern electronic systems. Key features include 120 ns read access time (150 ns for the 64-Mbit variant), 64 symmetric 128-Kbyte erase blocks (32 blocks for the 32-Mbit device), 4.5 V to 5.5 V VCC operation with 3.6 V to 5.5 V capable I/O, enhanced data protection with hardware lockout, and Common Flash Interface (CFI) compatibility for vendor-independent software support. The 56-SSOP package is well-suited for industrial embedded designs requiring surface-mount assembly. The DA28F320J5A120 uses Intel's ETOX (EPROM Tunnel Oxide) process technology for reliable charge storage and high endurance. Its symmetrical block architecture allows uniform erase granularity across the array, simplifying firmware wear-leveling algorithms and supporting block-mapped file systems common in embedded operating systems. Typical applications include networking router firmware, industrial control embedded systems, automotive telematics, set-top box boot storage, and legacy industrial PC BIOS/embedded firmware where 5V-tolerant, byte-alterable non-volatile memory is required. When designing with this device, ensure VCC decoupling is placed close to the device and respect the maximum 5.5 V supply rating; operating above 5.5 V will damage the cell array. The hardware protection pins (RP#, WP#) must be biased correctly during write/erase operations to prevent accidental data corruption. This page synthesizes distributor stock data, drop-in alternative options, and practical design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты
DAC-08CQ - 8-Bit High-Speed Multiplying DAC | AMD/Analog Devices
DAC-08CQ

DAC-08CQ - 8-Bit High-Speed Multiplying DAC | AMD/Analog Devices

The AMD/Analog Devices DAC-08CQ is an 8-bit monolithic high-speed multiplying digital-to-analog converter that delivers 85 ns settling time with low glitch energy in a 20-pin LCCC (LCC-20) surface-mount package. Operating as a current-output DAC with universal digital logic interface, it accepts standard TTL/CMOS inputs and supports a wide 20:1 reference current range from approximately 0.2 mA to 4 mA. The device provides very high speed performance coupled with low cost and outstanding applications flexibility for both commercial and industrial designs. A multiplying DAC (MDAC) is a digital-to-analog converter whose output is the product of a digital input word and an analog reference current or voltage, enabling four-quadrant multiplication when bipolar references are used. DACs of this class sit within the broader hierarchy of data converters (DAC -> data converter -> mixed-signal IC -> semiconductor) and are distinguished from integrating or sigma-delta types by their inherently high update rates and ability to operate on AC reference signals. Key features of the DAC-08CQ include ±10 ppm/°C typical full-scale output current drift, monotonic multiplying performance over a 20:1 reference current range, low glitch energy, and 1 LSB-accurate matching across the rated operating temperature range. Its advanced bipolar circuit design achieves settling within 85 ns to within ±1/2 LSB for full-scale transitions, while zero-scale output current and drift remain essentially negligible compared to 1/2 LSB. The DAC-08CQ is built on a bipolar process optimized for high-speed current steering, with an internal R-2R-type ladder network and high-impedance current sources that minimize dynamic errors during code transitions. The combination of fast settling and low glitch makes it suitable for video-rate signal generation, waveform synthesis, and digitally controlled calibration systems where step accuracy matters more than absolute DC precision. Typical applications include CRT display systems, precision motor control, audio attenuators, digitally programmable gain stages, function generators, and high-speed automatic test equipment. The wide reference current range also makes it well suited for process-control loops and software-calibrated instrumentation. When designing with this part, pay attention to the reference current source impedance: the DAC's multiplying bandwidth depends on keeping the reference source impedance low (typically under 500 ohm). For high-speed or AC-reference operation, buffer the reference with a low-output-impedance amplifier such as the AD844 to preserve bandwidth. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer page, including pin-compatibility guidance across the DAC08 family temperature grades.

Запрос цены Контакты
DAC38RF83 - Dual 14-Bit 9-GSPS RF-Sampling DAC | TI
DAC38RF83

DAC38RF83 - Dual 14-Bit 9-GSPS RF-Sampling DAC | TI

The Texas Instruments DAC38RF83 is a high-performance, dual-channel, 14-bit, 9-GSPS RF-sampling digital-to-analog converter (DAC) capable of synthesizing wideband signals from 0 to 4.5 GHz. It integrates a 6x-24x interpolating filter chain, an on-chip PLL (6 GHz and 9 GHz modes), and a JESD204B interface, and is supplied in a 144-pin FCBGA (10x10 mm) package. A digital-to-analog converter (DAC) converts digital binary data into an analog signal. As an RF-sampling DAC, the DAC38RF83 directly synthesizes signals at radio frequencies without an intermediate IF stage, simplifying transceiver architectures. It belongs to the family of high-speed data converters, essential in modern communication systems for bridging the digital and analog domains. Key features include dual 14-bit DAC cores operating at up to 9 GSPS, a flexible interpolation factor from 6x to 24x, an integrated PLL for clock generation, and a JESD204B interface supporting high per-lane data rates. The device offers single-ended or differential output modes, high dynamic range, and programmable output power, enabling direct RF synthesis up to 4.5 GHz while reducing system complexity and component count. The DAC38RF83 utilizes advanced CMOS technology and a high-speed current-steering architecture to achieve excellent spurious-free dynamic range (SFDR) and low noise spectral density. The on-chip PLL and clock multiplier reduce the need for external high-frequency clock sources, while the JESD204B serial interface simplifies PCB layout by minimizing data lines. Multiple operating modes, including real and complex output, plus digital gain and offset adjustment, provide design flexibility. Typical applications include 3G/4G/5G wireless base stations, radar systems, software-defined radio (SDR), and broadband test equipment. The wideband synthesis capability and high dynamic range support complex modulation schemes such as OFDM and wideband spread-spectrum signals. When designing with the DAC38RF83, careful attention must be paid to power supply decoupling and clock jitter, as these directly impact output signal quality. The device requires multiple supply rails (1.0V, 1.8V, 3.3V per family documentation; verify against the datasheet) and a clean reference clock, with controlled-impedance RF output traces.

Запрос цены Контакты
DAC38RF83IAAV - Dual 14-Bit 9-GSPS RF DAC | Texas Instruments
DAC38RF83IAAV

DAC38RF83IAAV - Dual 14-Bit 9-GSPS RF DAC | Texas Instruments

The Texas Instruments DAC38RF83IAAV is a dual-channel, 14-bit, 9-GSPS RF-sampling digital-to-analog converter (DAC) with 6x-24x interpolation, integrated 6 GHz and 9 GHz PLLs, and a JESD204B interface, housed in a 144-ball FCBGA (10x10 mm) package. A digital-to-analog converter (DAC) is a mixed-signal IC that translates digital code into an analog output current or voltage. Within the signal-chain hierarchy, a DAC sits between the digital baseband (FPGA or ASIC) and the analog/RF domain. RF-sampling DACs such as the DAC38RF83 push the reconstruction point directly to RF frequencies, eliminating an entire intermediate-frequency (IF) mixing stage and simplifying transmitter architectures. Key features include a 14-bit resolution with update rates up to 9 GSPS, wideband signal synthesis from 0 to 4.5 GHz, on-chip PLL clock multiplication supporting 6 GHz and 9 GHz operation, and flexible 6x-24x interpolation filters that relax FPGA JESD204B lane-rate requirements. The dual-channel architecture supports single-ended or differential outputs and mixed-mode (return-to-zero / non-return-to-zero / mix-mode) operation for optimized high-frequency output response. Technically, the DAC38RFxx family integrates a JESD204B 8.2 Gbps serial interface, digital up-conversion (complex mixing), and on-chip clock circuitry, reducing external clocking complexity. Programmable interpolation, NCO mixing, and gain/offset calibration registers allow software-defined radio waveforms to be generated with high spectral purity directly at RF. Typical applications include 5G wireless baseband-to-RF transmitters, wideband software-defined radios, radar and electronic warfare waveform generation, broadband test and measurement signal sources, and satellite communications uplinks. Design consideration: the RF DAC output current should be set with attention to output power and SFDR trade-offs, and the JESD204B lanes require careful controlled-impedance PCB layout with matched-length traces to the FPGA. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты
DAC38RF83IAAVR - Dual 14-Bit 9-GSPS RF-Sampling DAC | TI
DAC38RF83IAAVR

DAC38RF83IAAVR - Dual 14-Bit 9-GSPS RF-Sampling DAC | TI

The Texas Instruments DAC38RF83IAAVR is a dual-channel, 14-bit, 9-GSPS RF-sampling digital-to-analog converter (DAC) with 6x-24x interpolation and an integrated 6 GHz and 9 GHz PLL, housed in a 144-ball FCBGA (10x10 mm) package. It synthesizes wideband signals from 0 to 4.5 GHz with a JESD204B serial data interface. An RF-sampling DAC is a data-converter device that generates analog output signals directly at radio frequencies, eliminating the need for multiple upconversion mixer stages in the transmit chain. Within the signal-chain hierarchy, the DAC38RF83 sits in the data converters -> digital-to-analog converters -> RF-sampling DAC category and forms the heart of modern wideband transmitter architectures for wireless infrastructure and radar. Key features include dual-channel 14-bit resolution with a 9 GSPS maximum update rate, on-chip 6x-24x interpolation filters that relax data-interface speed requirements, and an integrated PLL/VCO clocking multiplier supporting 6 GHz and 9 GHz reference modes. The JESD204B interface with up to 8 lanes simplifies connectivity to FPGAs, and both single-ended and differential output options are supported. Architecturally, the DAC38RFxx family combines a high-dynamic-range current-steering DAC core with digital signal processing blocks, including complex and real mixing (NCO), digital upconversion, and programmable interpolation. The RF-sampling approach supports 3G/4G/5G wideband carrier aggregation with high SFDR performance. Typical applications include wireless base-station transmitters (3G/4G/5G), wideband radar and electronic warfare signal generation, cable headend and broadband signal synthesis, and test-and-measurement arbitrary waveform generation. Design consideration: maintain clean low-noise clocking and adequate thermal design in the FCBGA package; the high output swing at RF frequencies demands careful RF output balun/filter network selection per the datasheet application section. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing referenced as of 2026-09-03.

Запрос цены Контакты
DAC702KH-2 - 16-Bit DAC, 24-Pin CDIP | Texas Instruments
DAC702KH-2

DAC702KH-2 - 16-Bit DAC, 24-Pin CDIP | Texas Instruments

The Texas Instruments DAC702KH-2 is a monolithic 16-bit digital-to-analog converter with one channel and a 24-pin ceramic dual in-line package (CDIP). It supports voltage-output and current-output models according to the manufacturer datasheet and is specified for high accuracy, including maximum linearity error of ±0.0015% of FSR and maximum differential linearity error of ±0.003% of FSR. The converter is monotonic to 15 bits over its full specified temperature range and is pin-compatible with the DAC72 family. A digital-to-analog converter, or DAC, is a data-conversion integrated circuit that transforms a digital code into a proportional analog voltage or current. The DAC702 belongs to the broader hierarchy of data-converter IC, data-acquisition component, analog-output device, and semiconductor. In a signal chain, it is commonly placed after a digital processor, waveform generator, communications equipment, or industrial control system so that calculated values can become controllable analog signals. The verified manufacturer-related data identifies high-accuracy conversion, voltage-output and current-output models, 16-bit resolution, 15-bit monotonicity, and compatibility with DAC72 pin arrangements. Its dual in-line package supports through-hole PCB assembly rather than compact surface-mount layouts. The -2 suffix and exact ordering details must be confirmed from the manufacturer datasheet before release because the supplied web results verify the family and package but do not provide every temperature, supply-voltage, settling-time, or reference-voltage parameter. DAC702KH-2 is suitable for precision analog-signal generation when a legacy parallel-interface DAC is required. Potential uses include industrial process control, laboratory instrumentation, communications equipment, data-acquisition systems, and embedded control platforms. Because the converter is monotonic to 15 bits, it can avoid missing output codes over the specified temperature range, although system resolution still depends on the digital interface, reference circuit, analog output stage, power supply, and board layout. Designers should use the manufacturer datasheet for the complete pinout, electrical limits, timing, reference requirements, and recommended application circuit. The 24-pin CDIP footprint should be checked carefully during PCB layout, especially for analog and digital return paths. Decoupling, reference grounding, output loading, and data-bus timing should follow the datasheet guidance rather than assumptions based on newer DAC families.

Запрос цены Контакты
DAC707KP-4 - 16-Bit DAC | Texas Instruments | Precision Analog
DAC707KP-4

DAC707KP-4 - 16-Bit DAC | Texas Instruments | Precision Analog

The Texas Instruments DAC707KP-4 is a 16-bit microprocessor-compatible digital-to-analog converter in a 28-pin through-hole DIP package. The supplied data confirms its 16-bit conversion resolution and identifies the related DAC707KP family as a 28-pin PDIP device. Detailed electrical limits, reference voltage, output range, settling time, accuracy grades, power requirements, and temperature range were not included in the verified sources and therefore remain unsubstantiated here. A digital-to-analog converter is a data-conversion IC that translates a digital code into a proportional analog voltage or current. In the signal-chain hierarchy, a DAC sits between digital control or processing systems and analog output circuitry: digital bus -> DAC -> analog amplifier or load. The DAC707 family is described by its manufacturer data as microprocessor-compatible 16-bit converters, making it relevant to industrial control, instrumentation, waveform generation, and legacy embedded systems. The key verified feature is 16-bit digital resolution. When a manufacturer specifies converter resolution, the theoretical ideal quantization count is 2 raised to the number of bits, or 65,536 levels; this is a mathematical relationship rather than a claim of achieved accuracy. The -4 suffix is present in the exact MPN and distributor listing, but its grade or temperature meaning cannot be assigned without the manufacturer ordering table. Users must verify that code before treating the suffix as a qualification marker. The DAC707KP family uses a 28-pin PDIP package according to the verified distributor results. A through-hole DIP is useful for prototyping, educational systems, and repairable industrial assemblies because it remains accessible on a breadboard or perforated board. Its larger package and older through-hole format are less suitable for compact new portable products than a modern surface-mount data converter. Typical circuit implementation involves applying a valid digital word, supplying the required reference and power rails, checking logic levels, and using an external buffer when the destination cannot be driven directly. Because output range, reference voltage, and drive capability were absent from the supplied evidence, designers must consult the official family datasheet before sizing resistors, amplifiers, protection networks, or decoupling capacitors. This product record distinguishes confirmed facts from missing parameters and avoids inventing a replacement list. Search results identify the part as available through distributor and aggregator pages, but they do not provide a complete verified price ladder, pin assignment, lifecycle declaration, or same-footprint substitute matrix.

Запрос цены Контакты
DAC714HB-1 - 16-Bit Serial DAC | Texas Instruments
DAC714HB-1

DAC714HB-1 - 16-Bit Serial DAC | Texas Instruments

The Texas Instruments DAC714HB-1 is a 16-bit digital-to-analog converter with a serial data interface, a precision internal reference, and an asynchronous clear function, supplied in a 16-CDIP package. The verified product data identifies the device as a 16-bit DAC; its voltage output, ±1 LSB integral linearity, monotonic operation over temperature, and low noise including 120 nV/√Hz are stated in the manufacturer-oriented datasheet result. A DAC is a data conversion IC that translates a digital code into an analog voltage or current. In the signal-chain hierarchy, a DAC sits between digital control or processing circuitry and analog output circuitry. The DAC714 combines a monolithic converter, +10 V temperature-compensated reference, current-to-voltage amplifier, high-speed synchronous serial interface, and serial output for cascading multiple converters. The serial interface reduces the number of parallel data lines needed to communicate with a controller, while the internal reference helps simplify analog-output designs. Its 16-bit resolution supports fine-grained control and measurement applications. The asynchronous clear function immediately sets the output to midscale, providing a defined state during reset or system initialization. The low-noise specification is important when the converter output feeds sensitive analog signal chains. Typical uses include industrial control, instrumentation, test and measurement, programmable analog sources, data-acquisition systems, and laboratory equipment. The serial output feature can support multi-channel architectures when several converters must operate from one controller. The output should be interpreted only after checking the manufacturer datasheet for voltage ranges, reference accuracy, settling time, digital timing, and package details. Designers should review the complete DAC714 datasheet for supply requirements, pin functions, serial timing, reset behavior, output loading, and recommended decoupling. Pay particular attention to the distinction between the DAC714HB-1 ordering suffix and other DAC714 variants before approving a replacement or layout change. The verified distributor result confirms a 16-CDIP package and identifies the part as a 16-bit digital-to-analog converter, but several detailed electrical values require manufacturer verification. This page combines verified distributor and manufacturer resources with explicit data gaps, practical integration guidance, and a structured comparison framework. It is designed to support engineering selection rather than imply that unspecified parameters, pricing, lifecycle status, or drop-in alternatives have been confirmed.

Запрос цены Контакты
DAC715UB - 16-Bit Parallel DAC, +10V Ref, 28-SOIC | Texas Instruments
DAC715UB

DAC715UB - 16-Bit Parallel DAC, +10V Ref, 28-SOIC | Texas Instruments

The Texas Instruments DAC715UB is a complete monolithic 16-bit digital-to-analog converter with a 16-bit parallel bus interface, an on-chip +10 V temperature-compensated voltage reference, and a current-to-voltage output amplifier. Housed in a 28-pin SOIC (wide-body) package, it provides a unipolar 0 V to +10 V voltage output with 10 microsecond settling time to within 1 LSB. What is a 16-bit DAC with voltage output? A DAC (Digital-to-Analog Converter) converts a digital codeword into a precisely controlled analog voltage or current. A 16-bit DAC produces 65536 discrete output steps, giving an LSB size of about 153 microvolts on a 10 V full scale. Voltage-output DACs like the DAC715UB include an internal output amplifier so no external op-amp or shunt resistor is needed; in the broader hierarchy they sit within precision data converters (ADC/DAC), which belong to the signal-chain family of mixed-signal ICs. Key features include a high-speed 16-bit parallel double-buffered interface that allows simultaneous update of multiple DACs, an asynchronous CLR function that forces the output to mid-scale, and convenient external gain and offset adjustments for auto-calibration. Power dissipation is 600 mW maximum. The device is offered in 14-, 15-, and 16-bit linearity grades with the L grade specified for 16-bit monotonic operation over the -40C to +85C industrial temperature range. Architecturally, the DAC715UB uses an R-2R ladder network driven by the 16-bit input register. The double-buffered latch arrangement lets the input register be loaded first and then a single LDAC strobe simultaneously updates the analog output, enabling synchronized multi-channel operation in automated test equipment and process control systems. Typical applications include industrial process control, automated test equipment (ATE), precision instrumentation, motor control reference generation, and programmable voltage/current sources. The on-chip +10 V reference simplifies bill-of-materials by removing the need for an external reference IC. Design consideration: route the AGND and DGND separately and join them only at one point near the DAC ground pin. Place the 0.1 microfarand bypass capacitor as close to the supply pin as possible to preserve 16-bit linearity at high update rates. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты
DAC7545KU-1 - 12-Bit Parallel DAC | Texas Instruments | Industrial
DAC7545KU-1

DAC7545KU-1 - 12-Bit Parallel DAC | Texas Instruments | Industrial

The Texas Instruments DAC7545KU-1 is a 12-bit CMOS multiplying digital-to-analog converter that converts parallel digital words into a current output using an R-2R architecture, supplied in a 20-pin SOIC package. The verified listings identify the device as a 12-bit DAC with a 20-pin SOIC package and parallel word input, while detailed electrical limits are not provided in the supplied data. A DAC is a data-converter IC that transforms digital numeric codes into proportional analog voltage or current. This multiplying DAC supports the DAC7545KU family classification, but its exact reference current, output compliance range, supply requirements, linearity, temperature range, and settling time must be confirmed in the manufacturer datasheet before a new design is released. The key verified features are the 12-bit conversion resolution, parallel digital interface, current-output R-2R conversion architecture, and 20-pin SOIC package. Twelve bits provide 4,096 possible digital codes, making the converter suitable for instrumentation, industrial control, waveform generation, and embedded analog-output systems where moderate precision and compact logic integration are more important than very high resolution. The KU suffix and the -1 ordering suffix must be treated as exact orderable identifiers. The verified search results also show related catalog variants such as DAC7545KU, DAC7545KUG4, and DAC7545KU-BI, but the supplied evidence does not establish that every catalog suffix is pin-to-pin, electrically identical, and drop-in replaceable. Likewise, no verified same-footprint cross-brand replacement was returned. Typical DAC7545KU-1 uses include programmable analog setpoints in industrial controllers, excitation or reference signals in instrumentation, digital waveform generation, laboratory interfaces, and embedded systems where a parallel bus simplifies data-path implementation. Designers should pair the current-output DAC with a suitable operational amplifier when a voltage output is required. The principal design consideration is verification of electrical details from the authoritative manufacturer datasheet. Before layout approval, confirm the pin map, logic levels, supply rails, reference current, output compliance, required compensation components, and timing relationships for the exact -1 orderable part rather than relying on generic DAC family assumptions. This page combines verified catalog data, explicit uncertainty markers, source traceability, and application-focused engineering guidance. It also distinguishes the exact DAC7545KU-1 orderable from related family listings, helping procurement and design teams avoid unsupported drop-in claims while preparing a controlled technical evaluation.

Запрос цены Контакты
DAC7611U/2K5 - 12-Bit Serial DAC, 5V, SOIC-8 | Texas Instruments
DAC7611U/2K5

DAC7611U/2K5 - 12-Bit Serial DAC, 5V, SOIC-8 | Texas Instruments

The Texas Instruments DAC7611U/2K5 is a 12-bit serial-input digital-to-analog converter (DAC) with guaranteed 12-bit monotonicity across the industrial temperature range (-40°C to +85°C), supplied in an 8-pin SOIC package and shipped on a 2,500-piece tape-and-reel. A digital-to-analog converter (DAC) is a data-conversion integrated circuit that translates a binary digital word into a proportional analog voltage or current. The DAC sits within the broader data-converter IC family, which also includes analog-to-digital converters (ADCs); both are essential building blocks of mixed-signal systems that bridge the real-world analog domain and digital processors. The DAC7611 belongs to the low-power, single-channel, voltage-output, serial-interface sub-category used in compact, microprocessor-controlled designs. Key specifications include 12-bit resolution, 1 mV per LSB step size with a 4.095 V full-scale range, and 7 µs settling time to within 1 LSB for a full-scale step. The device integrates an input shift register, latch, 2.435 V internal reference, R-2R DAC core, and high-speed rail-to-rail output amplifier on a single die. A 3-wire serial interface operates to a 20 MHz clock. Asynchronous reset clears the output to zero scale without requiring a serial write. The architecture uses an R-2R ladder network driven by a precision bandgap reference and a 5 V single supply. The internal reference is laser-trimmed for low drift, and the rail-to-rail output stage swings within millivolts of either supply rail, eliminating the need for a negative supply in unipolar systems. Power consumption is 2.5 mW typical (0.5 mA at 5 V), suiting battery-powered instrumentation. Typical applications include industrial process-control analog output modules, programmable logic controller (PLC) setpoint generators, digitally controlled calibration sources, portable test equipment, and closed-loop servo setpoint references. The 4.095 V full-scale range with 1 mV LSB aligns naturally with 0-5 V analog I/O standards used in factory-automation backplanes. When designing with this device, place the 0.1 µF power-supply bypass capacitor as close as possible to the AVDD pin and observe standard SPI-mode timing for SDI, CLK, and /CS. The asynchronous CLR pin overrides any serial write and pulls the output to zero, which is useful for failsafe initialization in safety-critical loops. This page synthesizes distributor pricing, drop-in SOIC-8 alternatives, and PCB-layout design notes that are not consolidated in the manufacturer datasheet.

Запрос цены Контакты
DAC80508ZYZFR - 16-Bit 8-Ch SPI DAC | Texas Instruments
DAC80508ZYZFR

DAC80508ZYZFR - 16-Bit 8-Ch SPI DAC | Texas Instruments

The Texas Instruments DAC80508ZYZFR is a true 16-bit, 8-channel, buffered voltage-output digital-to-analog converter (DAC) with an SPI interface, housed in a compact 16-ball DSBGA (WCSP) package measuring only 2.0 mm x 2.0 mm. It operates from a single 2.7-V to 5.5-V supply over -40C to +125C. A digital-to-analog converter (DAC) is a data-converter IC that transforms digital binary codes into analog output voltages, bridging digital processors and the analog world. Within the data-acquisition hierarchy, DACs sit alongside ADCs as core mixed-signal building blocks, and the DAC80508 belongs to the pin-compatible DACx0508 family of 16-, 14-, and 12-bit octal DACs used across industrial and instrumentation systems. Key features include a precision internal 2.5-V reference with 5-ppm/C drift, eliminating external references in most designs, and user-selectable gain configurations delivering full-scale outputs of 1.25 V, 2.5 V, and 5 V. The SPI interface supports data rates up to 50 MHz with daisy-chaining, and an LDAC function enables simultaneous updates of all eight outputs. A power-on reset guarantees zero-scale or mid-scale outputs at startup. Technically, the DAC80508 uses a resistor-string architecture with a per-channel output buffer amplifier, providing excellent linearity, low glitch energy, and the ability to drive capacitive loads directly. Each channel is independently powered down for energy savings in battery-operated instruments. Typical applications include precision test and measurement equipment, industrial process control, motor control systems, and portable instrumentation. Low power consumption and the tiny WCSP footprint suit battery-powered and space-constrained designs. For best performance, decouple VDD with 0.1-uF and 10-uF capacitors close to the pin, bypass the reference with 1 uF, and use a clean analog ground plane with separated digital and analog grounds to minimize noise coupling.

Запрос цены Контакты
DAC80508ZYZFT - 16-Bit Octal SPI DAC | Texas Instruments
DAC80508ZYZFT

DAC80508ZYZFT - 16-Bit Octal SPI DAC | Texas Instruments

The Texas Instruments DAC80508ZYZFT is a true 16-bit, eight-channel, buffered voltage-output digital-to-analog converter (DAC) with an SPI interface, housed in a compact 16-ball DSBGA (YZF) wafer-level chip-scale package measuring approximately 2.0 mm x 2.0 mm. It integrates a precision 2.5-V, 5-ppm/C internal reference, eliminating the need for an external precision reference in most designs. A digital-to-analog converter is a data-conversion IC that translates digital binary codes into analog voltages, bridging the digital processor domain and the analog signal domain in mixed-signal systems. The DAC80508 belongs to the pin-compatible DACx0508 family, which spans 16-, 14-, and 12-bit resolution variants within the broader data-acquisition semiconductor hierarchy. Key features include 16-bit resolution with +/-1 LSB INL, a 5-us output settling time, and an internal reference with only 5 ppm/C temperature drift. The device operates from a single 1.7-V to 5.5-V supply, supports SPI clock rates up to 50 MHz, and offers a user-selectable gain configuration delivering full-scale outputs of 1.25 V, 2.5 V, or 5 V with an external reference. A power-on reset clears registers to zero-scale, and per-channel power-down mode reduces current to 0.5 uA per channel for battery-powered designs. Architecturally, the DAC80508 uses a resistor-string (R-2R derived string) core with an output buffer amplifier per channel, ensuring rail-to-rail output swing and low output impedance. The DSBGA-16 package minimizes board area, making it suitable for space-constrained portable equipment and dense multi-channel analog boards. Typical applications include precision instrumentation, industrial process control, motor control loops, and portable medical devices, where the combination of 16-bit accuracy, low drift, and low power is critical. When designing, decouple AVDD and DVDD with 0.1-uF and 1-uF capacitors placed close to the pins, bypass the VREF output with 1 uF, and keep SPI traces short and away from high-speed digital lines to minimize crosstalk.

Запрос цены Контакты
DAC80H-CBI-I - 12-Bit Digital-to-Analog Converter | Burr Brown
DAC80H-CBI-I

DAC80H-CBI-I - 12-Bit Digital-to-Analog Converter | Burr Brown

The Burr Brown DAC80H-CBI-I is a 12-bit digital-to-analog converter (DAC) designed for converting digital code streams into corresponding analog voltage or current signals. The verified distributor record identifies it as a digital-to-analog converter, while detailed electrical characteristics, supply requirements, interface format, output architecture, and package dimensions require confirmation from the manufacturer datasheet. The available source data does not provide enough verified information to safely populate those parameters. Its DAC80H naming places it in the family of precision and high-speed converter applications, but the exact device family architecture should be treated as unverified until the original datasheet is obtained. Engineers should use the DAC80H-CBI-I as a converter-level component rather than assume compatibility with a modern audio DAC without checking pinout, logic levels, settling time, and output circuitry. A digital-to-analog converter is a data-conversion integrated circuit that maps a digital input code to an analog output. DACs belong to the broader semiconductor hierarchy of interface ICs, converters, and signal-chain components. They are used wherever a digital system must produce a continuously variable analog quantity, including audio reconstruction, waveform generation, instrumentation, communications, industrial control, and test equipment. The usefulness of a DAC depends on resolution, accuracy, conversion speed, output noise, reference accuracy, supply requirements, digital interface compatibility, and output buffering. The verified record specifically identifies a resolution of 12 bits. This means the converter represents each digital sample with a 12-bit code, corresponding to 4,096 possible code values when the full range is used. However, total error, integral nonlinearity, differential nonlinearity, monotonicity, and effective noise are not present in the supplied records and must not be inferred from resolution alone. The converter may be used for instrumentation or signal generation, but its suitability for audio, RF, or high-speed communications depends on the missing timing and noise specifications. A DAC80-family design should be reviewed at the circuit level. Digital input timing, write or latching signals, reference voltage, analog supply sequencing, output loading, and layout all affect usable performance. The output stage may require op-amp post-amplification, current-to-voltage conversion, or filtering, but those details are not specified in the verified data. Do not select external components or PCB routing until the exact pinout and electrical limits are confirmed from the manufacturer documentation. Typical potential uses for a 12-bit DAC include laboratory signal generation, programmable voltage references, digital control systems, embedded instrumentation, audio signal reconstruction, and industrial test equipment. The actual application should be selected only after confirming output range, settling behavior, digital interface, and reference requirements. For new designs, verify the package drawing, pin numbering, supply voltages, absolute maximum ratings, and timing specifications directly with the manufacturer or authorized distributor. A key design consideration is to treat the datasheet as the authority for electrical limits and layout. The supplied search results confirm identity, function, and 12-bit resolution, but not the complete pinout or application circuit. Verify grounding, reference routing, decoupling, analog and digital supply separation, and output filtering before layout release. This page synthesizes verified distributor identity information, availability references, and engineering guidance while clearly identifying missing technical data rather than inventing specifications.

Запрос цены Контакты
DAC81416RHA - 16-Ch 16-Bit High-Voltage Output DAC | Texas Instruments
DAC81416RHA

DAC81416RHA - 16-Ch 16-Bit High-Voltage Output DAC | Texas Instruments

The Texas Instruments DAC81416RHA is a 16-channel, 16-bit, buffered, high-voltage output digital-to-analog converter (DAC) integrated into a 40-pin VQFN (6x6 mm) package. It belongs to the DACx1416 family (which also includes the 12-bit DAC61416 and 14-bit DAC71416), and it provides up to 16 high-voltage analog outputs with 12 µs typical settling time, integrated low-drift 2.5 V internal reference, and a maximum analog output swing of ±20 V. The device communicates via a 4-wire serial peripheral interface (SPI) compatible with logic levels up to 5.5 V, enabling direct connection to most host microcontrollers, FPGAs, or DSPs. A high-voltage output DAC is a precision data converter that synthesizes analog voltage signals (rather than low-level current-mode outputs) directly from a digital codeword. Compared to current-output DACs (such as multiplying-R2R or R-2R ladder types), high-voltage-output DACs integrate the output amplifier on-chip, eliminating the need for an external op-amp and signal-conditioning stage in applications such as industrial process control, optical networking bias control, and automated test equipment. Within the broader power management and signal chain hierarchy, a high-voltage DAC sits between a digital controller and an analog actuator: microcontroller -> DAC -> driver amplifier -> load. Key features of the DAC81416RHA include 16-bit monotonic operation, high linearity of ±4 LSB (max) INL, integrated 2.5 V reference with 5 ppm/°C typical drift, per-channel programmable gain and offset calibration registers, hardware LDAC pin for simultaneous output updates, and a wide AVDD supply range up to 41 V. The integrated reference eliminates the need for an external precision reference in most applications, simplifying BOM count and saving board space. The DAC81416RHA uses a precision R-2R ladder architecture combined with an output buffer capable of sourcing and sinking 5 mA per channel. Per-channel calibration registers correct for system-level zero and full-scale errors, while the wide analog output voltage range allows direct drive of high-voltage actuators, PIN diode attenuators, and proportional control loops. The device is also pin-compatible with the 14-bit DAC71416RHA and 12-bit DAC61416RHA, providing design scalability. Typical applications include optical networking (laser bias control, VOA attenuators), industrial process control (valve and pump control), automated test equipment (ATE) pin electronics, programmable power supplies, and bias-current generation for MEMS devices. The 16 independent channels also suit multi-axis motion-control boards that require synchronized analog setpoints. When designing with this DAC, ensure that the AVDD supply provides adequate headroom for the desired output swing and that adequate bulk decoupling is placed near the AVDD and AVSS pins. The LDAC pin enables simultaneous output updates across all channels, which is critical for scope- and waveform-synchronized actuation. This page synthesizes distributor pricing for the DAC81416RHA from authorized sources, drop-in pin-compatible alternatives from the same DACx1416 family, and practical PCB layout notes not found in the manufacturer datasheet alone.

Запрос цены Контакты
DAC8229FS-REEL - Dual 8-Bit Voltage-Output DAC | ADI
DAC8229FS-REEL

DAC8229FS-REEL - Dual 8-Bit Voltage-Output DAC | ADI

The Analog Devices DAC8229FS-REEL is a dual 8-bit, voltage-output, multiplying CMOS digital-to-analog converter with two independent DAC channels and a 20-lead SOIC package. Each channel provides 8-bit resolution, accepts a reference input of ±2.5 V, and uses an internal amplifier to generate an inverted voltage output. According to the manufacturer datasheet, the device can also accept a -10 V reference and produce a corresponding +10 V output. A DAC is a digital-to-analog converter, a semiconductor category used to translate digital codes into proportional voltage or current signals. The DAC8229 belongs to the voltage-output DAC family within the broader data-converter IC and signal-processing semiconductor hierarchy. Its multiplying architecture means that the output voltage scales with the applied reference signal, making the converter useful when designers need adjustable analog output under software or control-system direction. The primary features of the DAC8229 include dual-channel operation, 8-bit resolution, and voltage outputs with inverted polarity. The reference input range is ±2.5 V, while a -10 V reference is supported for operation extending to a +10 V output. The manufacturer datasheet also states that the converter dissipates less than 109 mW in the 20-pin 0.3-inch DIP or 20-lead SO surface-mount package, helping control heat in compact multi-channel equipment. Internally, the DAC8229 uses multiplying CMOS DAC elements and output amplifiers. Each digital input code controls the ratio between the external reference and the analog output, with the internal amplifier providing the required inversion. This structure allows one reference source to establish the scaling for both converter channels, although independent reference routing may be used when the two outputs require different scaling or isolation. Typical uses include programmable analog control, industrial test equipment, instrumentation, communications equipment, and digital-to-analog interface subsystems. It is particularly appropriate where two low-resolution analog outputs are required without allocating separate converter packages. Its multiplying reference architecture can support gain adjustment, waveform generation, and closed-loop actuator or test-signal control when paired with suitable external circuitry. The principal design consideration is reference polarity and range. A +2.5 V reference produces an inverted output with respect to the digital code, while a -10 V reference permits a corresponding +10 V output. Input and reference bypassing should be placed close to the device, and output loads must remain within the limits stated by the manufacturer datasheet. Designers should also account for supply sequencing and analog settling time. This page consolidates the verified manufacturer specifications, packaging information, sourcing links, comparison fields, and application guidance into a design-focused reference for the DAC8229FS-REEL. It also distinguishes verified values from specifications that still require confirmation from the datasheet or an authorized distributor.

Запрос цены Контакты
DAC8408BIHP - Quad 8-Bit DAC with Memory | Analog Devices
DAC8408BIHP

DAC8408BIHP - Quad 8-Bit DAC with Memory | Analog Devices

The Analog Devices DAC8408BIHP is a monolithic quad 8-bit multiplying digital-to-analog converter with memory, integrating four DAC channels in a 28-pin plastic package. Each channel provides its own reference input, feedback resistor, and onboard data latch with read/write capability. The device supports TTL/CMOS-compatible microprocessor interfacing and four-quadrant multiplication. A verified manufacturer listing confirms the quad 8-bit CMOS architecture; detailed electrical limits not present in the supplied web data remain identified as data needed. A multiplying DAC is a digital-to-analog converter whose output is proportional to both an input reference and an 8-bit digital code. In a multiply application, changing the reference voltage scales the converter output without changing the stored digital word. This makes the DAC useful where a control signal must attenuate, modulate, or calibrate an analog level. Four converters on one chip also reduce board area and simplify multi-channel system control. The DAC8408 family provides guaranteed monotonic DACs, endpoint linearity to 1/4 LSB, and DAC matching within 1%, as reported in the supplied indexed datasheet excerpt. Each channel has independent reference input and feedback circuitry, while the integrated latches support digital readback. These features make the device suitable for instrumentation, waveform generation, programmable gain or attenuation, automated test equipment, and four-channel control systems. The BIHP ordering code is associated with Analog Devices and the indexed product results describe the DAC8408 as a quad 8-bit multiplying CMOS D/A converter with memory. The supplied results do not provide a confirmed package designation, pin map, supply range, temperature range, settling time, reference voltage, output compliance, or lifecycle classification. Those values must be confirmed in the manufacturer datasheet before layout or production release. Designers should treat each DAC reference and feedback path as an analog signal path. Keep digital control traces away from reference and feedback nodes, provide a stable reference source, and follow the manufacturer’s recommended bypass and grounding arrangement. Because this is a CMOS converter, unused channels and unused digital inputs should be connected according to the datasheet rather than left floating. Verify output compliance and load-current limits before driving downstream circuitry. This page synthesizes the verified product description, source links, and engineering gaps from the supplied web results. It does not invent missing electrical values, package dimensions, pin assignments, or replacement claims. Use the Analog Devices product page and manufacturer datasheet as the controlling references for production design. For purchasing, price, stock, and lead time should be checked against current authorized distribution. The provided web results include a Rochester listing and an Octopart reference, but they do not establish XAIPART inventory or a guaranteed delivery commitment.

Запрос цены Контакты
DAC8408FS-REEL - Quad 8-Bit DAC with Memory | Analog Devices
DAC8408FS-REEL

DAC8408FS-REEL - Quad 8-Bit DAC with Memory | Analog Devices

The Analog Devices DAC8408FS-REEL is a monolithic quad 8-bit multiplying CMOS digital-to-analog converter with memory, packaged in a 28-pin SOIC. Each of the four converter channels has an independent reference input, feedback resistor, and onboard data latch with read/write capability. The device guarantees endpoint linearity to 1/4 LSB, maintains monotonic operation, and provides DAC matching within 1%. A digital-to-analog converter is an interface integrated circuit that translates digital code words into proportional analog voltages or currents. A multiplying DAC differs from a fixed-output converter because its output depends on both the digital input code and an external reference. Within the electronics hierarchy, the DAC8408 belongs to the ADC/DAC class of data-conversion ICs used to connect digital processing systems with analog instrumentation, control, or signal-generation circuits. The four-channel architecture reduces component count when a system requires several independently controlled analog outputs. Read/write-compatible latches allow the converter to retain digital information and support microprocessor or computer interfacing. The manufacturer description also identifies TTL/CMOS compatibility, four-quadrant multiplying operation, and processor-compatible control as important characteristics for deterministic digital-to-analog system integration. Each converter includes its own reference input and feedback resistor, allowing the four channels to use common or individual reference arrangements depending on the application. Independent references can support parallel channels with different scaling requirements, while a shared reference simplifies synchronization and tracking between channels. The guaranteed endpoint linearity and monotonicity support predictable transfer behavior in control, instrumentation, and waveform-generation systems. Typical uses include industrial process-control outputs, programmable test and measurement systems, multichannel instrumentation, industrial automation equipment, and embedded data-acquisition systems. The same-package DAC8408FSZ-REEL can serve as a directly comparable alternative when its grade and sourcing conditions are appropriate, but designers should verify the complete electrical specification and ordering information before substitution. The primary design consideration is reference and feedback implementation. Because the DAC is multiplying, reference quality and stability directly influence output accuracy. Layout should keep reference and analog-output paths compact, provide a low-impedance return for each channel, and isolate digital write activity from sensitive analog nodes. The 28-pin SOIC footprint also requires attention to thermal performance when all four channels operate continuously. This page consolidates the verified manufacturer description, distributor sourcing information, practical application guidance, and a conservative same-package comparison. Because the supplied search snapshot does not expose numerical pricing, pin assignments, or a qualified drop-in cross-reference set, unavailable engineering fields are explicitly identified rather than inferred.

Запрос цены Контакты
DAC8512FS-REEL - 12-Bit Serial DAC | Analog Devices
DAC8512FS-REEL

DAC8512FS-REEL - 12-Bit Serial DAC | Analog Devices

The Analog Devices DAC8512FS-REEL is a complete 12-bit voltage-output digital-to-analog converter designed for single +5 V operation. It integrates a DAC, input shift register, latches, voltage reference, and rail-to-rail output amplifier in an 8-pin SOIC package. The serial interface uses three wires for data input, clock, and load strobe, with an additional chip-select function supported by the DAC8512 family. A digital-to-analog converter, or DAC, converts digital code words into proportional analog voltages or currents. The DAC8512 belongs to the voltage-output DAC hierarchy, combining a digital interface and conversion core with an analog output stage. This integration gives embedded and control designers a compact way to add programmable analog output to instruments, industrial equipment, and other +5 V systems without implementing a separate converter, reference, and output amplifier. The key verified features of the DAC8512 include 12-bit resolution, a +5 V supply requirement, natural binary coding, a serial input interface, an integrated reference, and a rail-to-rail output amplifier. Its three-wire serial interface is compatible with DSP-style data transfer using SDI, CLK, and load strobe signals. The chip-select capability also supports arrangements containing multiple converters, provided the system drives the interface signals correctly. Internally, the device combines a binary-weighted R-2R DAC core with a serial shift register and latching circuitry. The shift register accepts the digital word, while the latch preserves the selected code for conversion. The integrated reference establishes the conversion scale, and the rail-to-rail output amplifier supports the output range specified for the device. The manufacturer describes the DAC8512 as being built with CBCMOS process technology. Typical uses include programmable test and measurement equipment, industrial process-control outputs, instrumentation, laboratory interfaces, and embedded systems that require a compact 12-bit analog output. In each case, the serial interface reduces the number of required data lines, while the integrated reference and output amplifier simplify the analog output implementation. Designers should account for the +5 V supply requirement, reference-decoupling recommendations, logic-level compatibility with the host controller, and the available output range defined by the Analog Devices datasheet. The DAC8512FS-REEL is supplied on tape and reel for automated production assembly, while its 8-pin SOIC package supports conventional surface-mount PCB construction. This product record combines verified manufacturer information with distributor availability references, package details, technical specifications, selection guidance, and practical design notes. It also documents why the available same-family alternatives must be checked carefully rather than treating every similarly described DAC as a true pin-to-pin replacement.

Запрос цены Контакты
DAC8740HRGER - Low-Power Fieldbus Modem | Texas Instruments
DAC8740HRGER

DAC8740HRGER - Low-Power Fieldbus Modem | Texas Instruments

The Texas Instruments DAC8740HRGER is a low-power HART, FOUNDATION Fieldbus, and PROFIBUS PA-compatible modem with a UART interface, offered in a 24-VQFN 4 x 4 mm package. The verified distributor listing identifies the interface and package, while the manufacturer describes the DAC874xH family as a half-duplex physical-layer modem for industrial process-control and automation systems. Its supported industrial protocols make it suitable for connecting sensors, actuators, transmitters, controllers, and field equipment. A fieldbus modem is an interface IC that converts digital UART information into the physical signaling required by an industrial fieldbus, and it can also receive and decode the corresponding bus waveform. In the HART mode described by Texas Instruments, the DAC8740H integrates the circuitry required for half-duplex HART physical-layer operation in slave or master configurations, reducing the amount of external circuitry needed by the transmitter. FOUNDATION Fieldbus and PROFIBUS PA compatibility broadens its relevance in process plants and industrial automation networks. The verified product data establishes the 24-VQFN 4 x 4 mm package and the UART-based architecture, but it does not provide a complete electrical parameter table in the supplied excerpts. Consequently, operating voltage, current consumption, baud rate, analog performance, temperature range, and protection limits are retained as datasheet-needed fields rather than inferred from the product family name. This conservative approach prevents protocol, supply, and signal-integrity assumptions from entering a design prematurely. The DAC8740HRGER is positioned for industrial measurement and control rather than ordinary consumer UART links. Its fieldbus compatibility is relevant when a controller must communicate with a 2-wire industrial process network through a defined physical layer. The UART interface gives the host processor a familiar digital connection, while the integrated modem circuitry reduces the design burden associated with waveform generation, reception, filtering, and bus coupling. Exact baud-rate and loading requirements should be checked against the complete manufacturer documentation before schematic release. Typical application areas include HART-connected pressure and temperature transmitters, FOUNDATION Fieldbus process instruments, PROFIBUS PA field devices, industrial controllers, sensor gateways, actuator interfaces, and factory automation equipment. The compact VQFN package helps reduce board area compared with larger leaded implementations, although exposed-pad layout, thermal performance, grounding, and high-speed signal routing must be handled according to the manufacturer's land pattern and layout guidance. The most important design step is to select the external network components and protection scheme around the exact bus topology, cable length, and operating mode. Fieldbus transceivers are exposed to industrial transients and long cables, so power-supply filtering, surge protection, grounding, connector design, and separation from noisy switching nodes deserve careful review. Verify pin-level multiplexing, supply sequencing, decoupling, and exposed-pad connections against the complete datasheet before layout sign-off. This page combines the verified manufacturer identity, protocol positioning, package information, distributor references, and engineering cautions. It is intended to help engineers locate the correct device, understand its industrial interface role, and identify which datasheet parameters still require confirmation before a production design is released.

Запрос цены Контакты
DAC8740HRGET - 2.7V-5.5V HART/Fieldbus Modem | TI
DAC8740HRGET

DAC8740HRGET - 2.7V-5.5V HART/Fieldbus Modem | TI

The Texas Instruments DAC8740HRGET is a low-power HART and FOUNDATION Fieldbus modem integrated circuit with a 2.7 V to 5.5 V supply range, housed in a 24-pin VQFN 4 mm × 4 mm package. It belongs to the DAC874xH family, which supports HART, FOUNDATION Fieldbus, and PROFIBUS PA communications for industrial process-control and factory-automation equipment. The device can operate as either a half-duplex HART master or slave and is designed to minimize the number of external components required by a fieldbus physical layer. A HART modem is the physical-layer interface used to superimpose digital communication signals on 4–20 mA analog instrumentation circuits. A FOUNDATION Fieldbus or PROFIBUS PA interface similarly combines process communication with power delivery over an industrial fieldbus. These interfaces allow sensors, transmitters, controllers, and other field devices to exchange data over the same wiring infrastructure used for measurement and actuation. The DAC8740HRGET provides a compact 2.7 V to 5.5 V operating supply range for integration into modern industrial electronics. Its half-duplex operating arrangement supports both master and slave configurations, while its integrated modem functionality is intended to reduce board area and external circuitry. The VQFN-24 4 mm × 4 mm package also supports compact transmitter and receiver designs where PCB space is constrained. The DAC8740H family was created for industrial process-control and industrial-automation applications requiring interoperable fieldbus connectivity. In HART mode, the integrated circuitry is intended to perform the required half-duplex physical-layer functions with minimal external components. This makes the device applicable to transmitter boards, sensor interfaces, communication controllers, data-acquisition equipment, and connected process-control modules. Typical uses include 4–20 mA HART transmitters, FOUNDATION Fieldbus host and field equipment, PROFIBUS PA measurement devices, industrial sensor gateways, process-monitoring instruments, and factory automation controllers. Designers should verify the exact electrical limits, communication timing, external component requirements, and thermal limits against the manufacturer datasheet before finalizing a production design. A critical design consideration is selecting the correct fieldbus termination, coupling, protection, and decoupling network. The 2.7 V to 5.5 V supply range must remain valid under transient conditions, and exposed industrial connections may require surge and ESD protection beyond the modem's core communications function. Layout should keep sensitive analog and modem nodes away from high-current switching paths. This product page combines verified distributor pricing, package information, family capabilities, source links, and drop-in replacement analysis with practical industrial-interface design guidance. It distinguishes verified alternatives from broader functional equivalents so engineers can assess PCB replacement risk before committing to a redesign.

Запрос цены Контакты