Товары (44.000+)

ICL7137CQH - Low-Power 3.5-Digit ADC | Maxim Integrated
ICL7137CQH

ICL7137CQH - Low-Power 3.5-Digit ADC | Maxim Integrated

The Maxim Integrated ICL7137CQH is a low-power, 3.5-digit dual-slope analog-to-digital converter with a direct LCD driver in a 44-pin QFP package. It operates in the commercial 0°C to 70°C temperature range, has 44 J-bend terminals, and is identified by package code QCCJ. The listed input-voltage range is 2.6 V to 3.2 V. An ADC is an integrated circuit that converts an analog voltage into a numeric value. The dual-slope technique used by the ICL7137CQH integrates the unknown input over a fixed interval and compares it with a reference ramp. A digital counter then measures the integration time required to reach balance. This method is suited to panel meters, laboratory instruments, digital scales, and other systems where stable readings and direct display-driver integration are more important than very high conversion speed. The ICL7137CQH combines low-power operation with 3.5-digit measurement resolution and direct LCD drive capability. Its 44-pin package provides separate connections for analog measurement inputs, reference circuitry, timing, digital data, and display outputs. The commercial temperature range supports equipment intended for controlled indoor or industrial environments rather than extended automotive, military, or extreme-temperature operation. The 44-pin QFP package provides adequate connection density for analog, digital, and display functions while supporting surface-mount assembly. The MS-022AB package designation and J-bend terminal form identify a leaded quad flat package. Designers must preserve the package footprint, pin assignment, analog trace geometry, bypass-capacitor placement, and reference-source arrangement when revising a circuit around this converter. Typical uses include digital panel meters, precision weighing indicators, temperature-display instruments, laboratory measurement equipment, and process-monitoring panels. Direct LCD drive is particularly useful when the converter's digital outputs can operate a display without an additional display-controller IC. In each case, the design must account for reference accuracy, input integration timing, display update rate, and the electrical limits of the connected LCD. A critical layout consideration is the analog input and reference network. Keep these connections short, place the associated bypass capacitors close to their supply pins, and route digital and display signals away from sensitive analog nodes. Verify timing and conversion behavior with the intended source impedance because the dual-slope measurement integrates current rather than sampling an instantaneous voltage. This product page organizes the verified electrical, environmental, mechanical, and commercial attributes of the ICL7137CQH. It also identifies same-brand alternatives in the related cross-reference results and adds application, comparison, and design guidance to help engineers evaluate a replacement without overlooking display-driver or measurement-system differences.

Запрос цены Контакты
ICL7149CPL - 3¾-Digit Autoranging Multimeter IC | Renesas
ICL7149CPL

ICL7149CPL - 3¾-Digit Autoranging Multimeter IC | Renesas

Renesas Electronics ICL7149CPL is a low-power, autoranging 3¾-digit digital-multimeter IC that converts analog input voltage into a BCD measurement result for direct display processing. It is supplied in a 40-pin plastic dual in-line package. The ICL7149 uses successive-approximation conversion and integrates the analog-to-digital conversion function, auto-ranging control, and counter functions needed to implement the measurement front end of a digital multimeter. A digital-multimeter IC is a specialized data-conversion and measurement-control component that sits between the physical input network and the display or processing system. Its wider functional hierarchy is analog-to-digital converter, integrated circuit, and semiconductor. Unlike a general-purpose ADC intended only for sampled waveforms, the ICL7149 is designed around the repetitive measurement behavior of a handheld meter. According to the manufacturer datasheet, the ICL7139 and ICL7149 always display the result of a conversion on the correct range. The principal feature of the ICL7149 is automatic range selection, which simplifies the front-panel design by reducing the number of manual range-switch controls. Its 3¾-digit measurement format provides a resolution suitable for common laboratory, service, industrial, and educational instruments. The low-power architecture also targets portable equipment where the display, reference circuitry, switches, and measurement amplifier must operate efficiently from a limited power budget. ICL7149CPL integrates a successive-approximation ADC with a ratiometric measurement architecture. External resistors, capacitors, reference voltage, input conditioning, and display-driver circuitry complete the instrument. Its BCD output supports conventional seven-segment display decoding, while control logic coordinates autoranging, digit strobes, and the measurement sequence. Designers should consult the manufacturer pin-description and application tables before assigning tracks because the exact functions, test points, and supply requirements are assigned by pin number. Typical applications include handheld and bench-top digital multimeters, panel meters, laboratory measurement instruments, educational test equipment, and embedded diagnostic instruments. In each case, the ICL7149 handles repetitive conversion and range selection while an external analog front end defines the measurable voltage, current, and resistance ranges. The display system then receives the converted result for numeric presentation. The principal design consideration is preserving the ratiometric relationship between the reference and measured signal. Reference bypass, analog input settling, timing, and display-driver implementation materially affect accuracy and repeatability. Layout should separate sensitive analog nodes from display and control transitions, while the power supply must provide a stable operating environment for both the converter and its external components. This product record combines the manufacturer datasheet with distributor package and availability information, then adds application guidance, design checks, and sourcing questions for engineers evaluating this legacy autoranging meter IC in a new or repair design.

Запрос цены Контакты
ICL7182CPL - 40-Pin DIP Integrated Circuit | Rochester
ICL7182CPL

ICL7182CPL - 40-Pin DIP Integrated Circuit | Rochester

The Rochester Electronics ICL7182CPL is a 40-pin DIP integrated circuit associated with high-performance analog-to-digital conversion and interface-controller applications. Its identifying order code combines the ICL7182 device designation with the CPL package suffix, and catalog information identifies the physical format as DIP-40. The component is offered as an integrated circuit through multiple authorized channels, indicating continued availability for legacy and industrial designs. Its principal engineering value is support for established hardware rather than integration into the newest mixed-signal systems. An analog-to-digital converter, or ADC, is a semiconductor that converts an analog voltage into a digital code for processing, measurement, or control. In an instrumentation system, an ADC may follow an analog sensor and signal-conditioning stage. In an industrial control system, it can digitize a control or monitoring signal before a processor evaluates it. The ICL7182CPL is positioned within this broad ADC and interface-controller product category, while its exact conversion architecture, resolution, timing, and input ranges require confirmation from the manufacturer documentation. The verified product identity establishes the MPN, Rochester Electronics source, 40-pin DIP package, and classification among integrated circuits. Specific operating voltage, conversion resolution, sampling rate, input count, reference configuration, digital interface, and temperature range are not stated in the available catalog records. Engineers should therefore treat those electrical values as qualification items rather than assume ratings from similarly named devices. Confirm them in the original ICL7182 datasheet before schematic release, firmware development, or production procurement. Because this is a legacy through-hole device, PCB implementation differs from modern surface-mount converter designs. The DIP-40 footprint uses plated through-hole rows with a 0.1-inch pin pitch and a 600 mil row spacing. It can be assembled into older industrial, measurement, and control boards, although it occupies substantially more board area than a compact mixed-signal package. RoHS and REACH status, qualification grades, thermal ratings, and electrical limits should also be confirmed for the exact ordered configuration. Typical uses for this device family include digitized process measurement, laboratory instrumentation, industrial data acquisition, and legacy control interfaces. In each case, the designer must preserve the original converter's clocking, reference, input-conditioning, and digital-bus arrangements. A substitute evaluation must compare not only the package and pin assignments but also conversion timing, input impedance, reference requirements, data format, and control signals. These characteristics determine whether a board can operate without hardware or firmware changes. For legacy product maintenance, the safest design method is to treat the original circuit and firmware as the reference. Verify supply rails and signal levels against the exact datasheet, preserve decoupling and reference layout, and test conversion accuracy across the intended temperature range. When procuring a replacement, request the manufacturer datasheet and confirm the package marking, revision status, and pinout rather than relying solely on a catalog classification. This page consolidates the verified part identity, package information, sourcing context, replacement constraints, and practical legacy-design guidance. It also distinguishes confirmed attributes from parameters that still require document-level verification, helping engineers plan a controlled repair, redesign, or second-source decision without overstating the capabilities of the ICL7182CPL.

Запрос цены Контакты
ICL7652P - 5 uV Zero-Drift Op Amp | Texas Instruments
ICL7652P

ICL7652P - 5 uV Zero-Drift Op Amp | Texas Instruments

The Texas Instruments ICL7652P is a single-circuit, precision chopper-stabilized operational amplifier with 5 uV offset, zero-drift operation, and a 1.9 MHz gain-bandwidth product. It is supplied in an 8-pin PDIP package. The device is designed for instrumentation and other applications requiring low input offset voltage, low bias current, and low drift over temperature or time. An operational amplifier is an analog signal-processing component that uses negative feedback to control gain, filtering, buffering, or amplification of a voltage signal. The ICL7652 belongs to the precision op-amp hierarchy: operational amplifier, instrumentation amplifier element, analog IC, and semiconductor. Its chopper-stabilized architecture is intended to reduce offset-related error in dc and low-frequency measurements. The verified manufacturer description identifies the ICL7652 as a high-precision, 5-uV-offset chopper-stabilized operational amplifier. The distributor listing specifies one amplifier circuit in an 8-PDIP package, while a separate component listing identifies 1.9 MHz as the associated frequency parameter. The supplied source material does not provide complete electrical tables for supply voltage, input bias current, output swing, noise, common-mode range, or temperature limits, so those specifications are not inferred here. ICL7652P is suitable for precision sensor interfaces, low-level signal conditioning, bridge amplification, current measurement, laboratory instrumentation, and industrial measurement systems when the circuit requires low offset and low drift. The 8-pin PDIP package is mechanically straightforward for through-hole assembly and prototyping. Its precision behavior should be evaluated against the complete manufacturer datasheet before production release. A key design consideration is to verify the required supply rails, input common-mode range, output swing, noise performance, and external compensation or filtering requirements on the authoritative ICL7652 datasheet. The verified distributor search result does not provide those values, so applications should be selected only after checking the electrical characteristics and pin configuration for the exact ICL7652P ordering code. This page combines the verified Texas Instruments product description, distributor identification, package information, available commercial sources, and application-oriented design guidance without inventing missing specifications. It is intended to help engineers identify the correct precision chopper-stabilized amplifier candidate for instrumentation and low-level analog designs.

Запрос цены Контакты
ICM7228BIPIZ - 8-Digit LED Display Driver, 28-PDIP | Renesas
ICM7228BIPIZ

ICM7228BIPIZ - 8-Digit LED Display Driver, 28-PDIP | Renesas

The Renesas ICM7228BIPIZ is an 8-digit, 7-segment, microprocessor-compatible LED display decoder driver housed in a 28-pin PDIP package. It integrates two types of 7-segment decoders (Code B and Code B without DP), multiplex scan circuitry, segment and digit drivers, and an 8-byte static display memory into a single chip. The device operates from a single 4V to 6V supply and drives common-cathode LED displays directly through on-chip digit drivers rated for typical LED segment currents. What is an LED display decoder driver? An LED display decoder driver is an interface IC that bridges a microprocessor or digital logic to a multiplexed 7-segment LED display. It accepts parallel or serial numeric data, decodes it into 7-segment patterns using internal lookup tables, and generates the time-multiplexed drive signals that sequentially energize each digit position. By replacing dozens of discrete logic gates, BCD-to-7-segment decoders, and discrete transistors, these parts dramatically reduce PCB area, BOM count, and design complexity for numeric readouts. The ICM7228 family sits within the broader Display Driver category of power management/interface ICs. Key features of the ICM7228BIPIZ include direct microprocessor bus interfacing with no external components required for static display memory, on-chip multiplex scan oscillator, sixteen segment drivers, and eight digit drivers. The "B" suffix indicates a non-latching, Code B/HEX decoder with a built-in 8-character RAM, allowing random access to any digit via address lines. The ICM7228A variant differs only by its single-digit access mode and pin mapping; the ICM7228B is designed to be a drop-in upgrade for Intersil ICM7218 designs. Typical applications include panel meters, test equipment readouts, instrumentation front panels, hand-held instruments, and bargraph displays. Designers choose the ICM7228BIPIZ when they need a robust, time-proven display driver with a well-documented interface and no firmware-driven multiplexing burden. When planning the PCB layout, ensure the digit driver outputs connect to common-cathode digit commons with appropriate current-setting resistors in series with each segment, and place the device close to the display to minimize EMI and trace resistance.

Запрос цены Контакты
ICS1523M - 250MHz Video Clock Synthesizer | Renesas | SOIC-24
ICS1523M

ICS1523M - 250MHz Video Clock Synthesizer | Renesas | SOIC-24

Renesas Electronics ICS1523M is a 250 MHz clock synthesizer and frequency generator designed for general-purpose phase-controlled clock synthesis, line-locked and genlocked high-resolution video systems, and video projection equipment. The device is supplied in a 24-pin SOIC package measuring 0.295 inch, or 7.50 mm, in width. Its architecture uses advanced low-voltage CMOS mixed-mode technology to combine programmable frequency generation with phase-controlled operation. A clock synthesizer, also called a clock generator or phase-locked-loop-based timing device, produces one or more timing signals whose frequency and phase are controlled relative to an external reference. In a phase-locked system, the internal output remains synchronized to the reference while the feedback network determines the desired relationship. This category belongs to the Clock & Timing hierarchy, which includes clock generators, frequency synthesizers, phase-locked loops, clock buffers, and timing controllers used to coordinate digital and video systems. The principal documented feature of the ICS1523M is its 250 MHz operating frequency. Its phase-controlled frequency-generation capability makes it suitable where a system requires adjustable or externally synchronized clocks rather than a fixed-frequency oscillator. The manufacturer describes the ICS1523 family as a low-cost, high-performance solution for general-purpose clock synthesis, line-locked and genlocked high-resolution video applications, and projectors. The mixed-signal nature of the design is important in video timing systems. A reference signal establishes the synchronization point, while phase control permits the generated clock to be adjusted relative to that reference. This supports timing alignment across multiple video-processing stages and reduces reliance on multiple independent free-running clocks. Exact voltage, current, jitter, temperature, and programming-interface details were not included in the supplied source data and must be confirmed in the manufacturer datasheet before design release. ICS1523M applications include professional video timing systems, video projectors, line-locked display equipment, genlocked production systems, and general-purpose phase-controlled clock modules. In these systems, the ICS1523M can provide a coordinated timing reference for converters, processors, memory interfaces, or other circuitry requiring a stable phase-related clock. A key implementation consideration is to preserve the manufacturer's recommended reference, feedback, decoupling, and output-routing topology. Incorrect feedback connections or an unsuitable reference source can prevent phase lock or impair jitter performance. Because the verified source material does not expose complete pin assignments or electrical tables, engineers should use the official datasheet for pin connectivity, loop-filter selection, operating limits, and layout requirements. This product summary combines the verified 250 MHz, 24-SOIC package, application positioning, pricing availability, and replacement analysis with practical design guidance. It also distinguishes documented facts from parameters that still require datasheet confirmation, helping engineers evaluate the ICS1523M without treating unspecified values as guaranteed specifications.

Запрос цены Контакты
ICS1523MT - 250MHz Video Clock Synthesizer | Renesas
ICS1523MT

ICS1523MT - 250MHz Video Clock Synthesizer | Renesas

The Renesas ICS1523MT is a video clock synthesizer with I2C programmable delay, designed for general-purpose phase-controlled clock synthesis and line-locked or genlocked high-resolution video applications. It operates as a clock-generation and timing IC with a nominal 250 MHz capability and is packaged in a 24-SOIC package. The device is listed by Renesas as a clock synthesizer within the clock-generator and PLL product family. A video clock synthesizer is a timing IC that generates, divides, delays, or phases a reference clock so downstream video-processing circuits operate from a controlled timing source. In the broader semiconductor hierarchy, the ICS1523MT belongs to the clock and timing IC category and supports power-management, display, broadcast, and video-conversion systems where predictable phase relationships and programmable timing are required. The main feature of the ICS1523MT is its I2C-programmable delay. This allows a system controller to adjust timing behavior over a serial interface rather than relying on fixed external delay components. The part is specifically suited to phase-controlled clock synthesis, where the relationship between a generated clock and an external reference must be managed precisely. Its video-clock orientation makes it useful in professional video, broadcast, monitoring, and genlocking equipment. The ICS1523MT is identified as a 24-SOIC device with a 0.295 inch, or 7.50 mm, width. The suffix MT distinguishes this ordering code from other package or temperature-related variants of the ICS1523 family. Because clock timing performance depends on reference-clock quality, board layout, output loading, and supply stability, designers should preserve short clock paths and provide the decoupling recommended by the manufacturer datasheet. Typical applications include high-resolution video timing, line-locked systems, genlocked broadcast equipment, video capture and conversion systems, and multi-standard video infrastructure. The I2C control interface is especially useful in systems where timing calibration must be adjusted dynamically during setup or when different video formats require different phase relationships. Designers should verify the complete electrical limits, register map, clock-input requirements, output characteristics, and recommended application circuit against the Renesas datasheet before layout release. The principal trade-off is that programmable delay adds control complexity, but it can reduce discrete timing hardware and improve system calibration flexibility. This page combines the verified ICS1523MT product identity, package information, clock-synthesizer classification, datasheet links, application guidance, and drop-in alternatives for engineers evaluating a PCB-compatible replacement.

Запрос цены Контакты
ICS1524AM - Dual Output Phase Controlled SSTL_3/PECL Clock Generator | Renesas
ICS1524AM

ICS1524AM - Dual Output Phase Controlled SSTL_3/PECL Clock Generator | Renesas

The Renesas (formerly Integrated Device Technology / IDT) ICS1524AM is a dual-output phase-controlled SSTL_3/PECL clock generator integrated into a 24-pin SOIC surface-mount package. It is cataloged under clock generators, PLLs and frequency synthesizers and is described as a low-cost, very high-performance frequency generator and phase-controlled clock synthesizer, delivering two independently phase-controlled differential clock outputs from a common reference source. A clock generator is a timing IC that converts a reference frequency into one or more output clocks, forming the entry point of the clock and timing hierarchy that runs from crystal oscillator through clock generator and PLL to clock buffer and jitter cleaner. Where a plain buffer only reproduces an existing waveform, a phase-controlled clock generator adds programmable delay and frequency synthesis, allowing a board to create two related but independently adjustable clocks without a separate PLL, delay line or FPGA fabric. Key characteristics of this device include a dual-output architecture, SSTL_3/PECL-compatible differential output signalling designed for high-speed backplane and telecommunications links, phase control of each output, and a 24-SOIC package with a 0.295 inch (7.50 mm) body width. Because it is a differential ECL-family output device, it is normally used with terminated 50 ohm transmission lines, short stub lengths and controlled reference planes in multilayer boards. Internally, the device combines a phase-locked loop with programmable phase shift elements feeding two output buffers. The phase adjustment range, operating frequency band and lock characteristics are the parameters that determine whether it can lock to the system reference and deliver the required skew margin. Because it is a bipolar ECL-family design, supply rails are positive-referenced, typically around 5 V with PECL-compatible output levels, and the unused supply pins must still be connected to keep the device within its rated operating condition. Typical uses include telecommunications line-card and network interface clock distribution, server and storage backplane clock synthesis, data-converter sampling clock generation, and instrumentation or test systems that require two phase-offset clocks from a single reference. In these systems the two outputs are commonly used to create a sampling clock and a data-strobe clock, or to feed a PLL capture circuit with an offset reference clock. When laying out a board around the ICS1524AM, keep output and input traces short, provide solid ground-plane continuity under the device, and place termination close to the receiver. Verify differential pair length matching, keep the phase-control network away from high-speed output routing, and confirm the reference clock amplitude meets the input sensitivity requirement in the manufacturer datasheet before committing the layout. This page consolidates device classification, package details, drop-in ordering variants, and practical layout guidance into one engineering reference, so you can evaluate the ICS1524AM against alternative dual-output clock generators without hunting through separate distributor listings and application notes.

Запрос цены Контакты
ICS1526G - 110MHz Clock Synthesizer, 16-TSSOP | Renesas
ICS1526G

ICS1526G - 110MHz Clock Synthesizer, 16-TSSOP | Renesas

The Renesas Electronics ICS1526G is a low-cost, high-performance clock/frequency synthesizer IC with a maximum operating frequency of 110 MHz, packaged in a 16-pin TSSOP (0.173 inch, 4.40 mm width). It is built on IDT's advanced low-voltage CMOS mixed-mode technology and is positioned as a general-purpose phase-controlled clock synthesis solution as well as a line-locked and genlocked high-resolution video timing generator. A clock synthesizer (also called a PLL-based frequency generator or clock generator IC) is a timing IC that multiplies, divides, or regenerates a reference clock into one or more stable output frequencies. It belongs to the clock and timing hierarchy inside integrated circuits, sitting between a crystal oscillator and the logic, memory, or display circuitry that consumes the clock. Unlike a simple crystal oscillator, a PLL-based synthesizer can derive many related output frequencies from one low-frequency reference and can phase-align those outputs to an external video sync source. Key characteristics of the ICS1526G include a 110 MHz maximum frequency, a single clock/frequency synthesizer function, and 16-TSSOP surface-mount packaging. The device is specifically suited to video projectors and displays across multiple resolutions, where the master oscillator frequency and lock behavior determine whether the generated timing is stable enough for pixel-perfect image reproduction. Technically, the ICS1526 relies on a phase-locked loop to lock an internal VCO to a reference input, then divides or multiplies that locked frequency down to the desired output. The mixed-mode CMOS implementation combines analog loop control with digital frequency programming, which is why phase adjust and lock detection features are central to its use in genlocked video systems. Typical applications include video projector timing generation, professional video monitoring equipment, broadcast and studio reference distribution, genlocked display systems, industrial imaging panels, and general-purpose clock trees for consumer and industrial electronics where a single reference source must fan out to multiple derived clocks. When designing with the ICS1526G, verify the reference frequency window, the required output divider ratios, and loop lock acquisition time for your target video standard. Also confirm that your output jitter and skew budget is satisfied before committing to the part, since these parameters are not published in the distributor listings summarized on this page. This page consolidates distributor availability, package details, drop-in alternatives from the same Renesas/IDT clock-generator family, and practical design guidance that is not consolidated in any single distributor product page.

Запрос цены Контакты
ICS1526GT - 110MHz Clock Synthesizer | Renesas | Video
ICS1526GT

ICS1526GT - 110MHz Clock Synthesizer | Renesas | Video

Renesas Electronics ICS1526GT is a 110 MHz clock and frequency synthesizer IC with one clock output in a 16-pin TSSOP package measuring 4.40 mm wide. It is designed for general-purpose phase-controlled clock synthesis and for line-locked or genlocked high-resolution video systems. A clock synthesizer is an integrated timing circuit that generates or organizes clock signals for another circuit. Within the broader semiconductor hierarchy, the ICS1526GT belongs to the clock and timing IC family, where it sits between a basic oscillator and a more complex PLL-based clock-generation solution. Its frequency-generation architecture allows a system to derive synchronized timing for video projection, display, and other phase-sensitive equipment. The principal rated operating frequency is 110 MHz, and the device provides one clock output in a 16-TSSOP package. The 4.40 mm package width supports compact, surface-mount PCB construction without using a large through-hole footprint. Its low-voltage CMOS mixed-mode process technology combines digital timing functions with analog phase-control behavior, which is useful when multiple system clocks must remain aligned. The ICS1526GT is particularly suited to general-purpose phase-controlled clock synthesis. In a video projector or display, timing relationships determine pixel synchronization and image stability. Line-locked and genlocked operation allows the generated clock to remain referenced to an external video signal, helping downstream circuits reproduce stable horizontal and vertical timing. The 110 MHz operating point also provides a useful reference point for timing designs requiring precise phase alignment. Typical uses include video projectors, professional displays, broadcast-compatible video equipment, line-locked timing modules, genlock distribution systems, and clock-generation boards. The same synthesizer can also serve as the timing reference in an industrial imaging system when its operating conditions, lock behavior, and electrical limits match the intended source and output architecture. When designing around the ICS1526GT, preserve the manufacturer’s recommended input, output, and decoupling arrangements. Signal-integrity performance depends on keeping the clock route compact, providing a stable reference source, and observing the allowable loading and timing ranges. Because phase-control and synchronization behavior are central to this device, evaluate the complete external loop rather than judging suitability from the 110 MHz headline frequency alone. This product page combines the manufacturer’s clock-generation description with the 110 MHz frequency, single-output configuration, 16-TSSOP package information, practical application guidance, and verified source links. It also identifies the sourcing and engineering questions that should be resolved before the device is placed into a new line-locked, genlocked, or phase-controlled timing design.

Запрос цены Контакты
ICS1574BM - Programmable Laser Clock Generator | Renesas
ICS1574BM

ICS1574BM - Programmable Laser Clock Generator | Renesas

Renesas Electronics ICS1574BM is a user-programmable laser engine pixel clock generator built around a monolithic phase-locked-loop frequency synthesizer. It generates the timing signals required by laser-engine imaging systems and is specified in a 16-pin SOIC package. The device description identifies advanced CMOS mixed-mode PLL technology, combining programmable frequency synthesis with clock-generation functionality in one integrated circuit. A phase-locked loop, or PLL, is a feedback-controlled frequency synthesizer that locks an internally generated output to a reference clock. By phase-locking the output to a stable reference, the ICS1574BM provides a controlled relationship between its program settings and the resulting laser-engine pixel timing. This makes it part of the broader clock and timing IC hierarchy: pixel clock generator, PLL frequency synthesizer, clock-generation IC, timing IC, and semiconductor. The principal feature of the ICS1574BM is user programmability. Programming lets a laser-imaging system tune pixel-clock behavior for different operating conditions instead of relying on a fixed-frequency output. The monolithic construction reduces the number of separate frequency-synthesis components, while the CMOS mixed-mode architecture combines analog phase detection with digital control functions. The 16-SOIC package also provides a compact surface-mount option for laser-engine electronics. The ICS1574BM is specifically positioned for laser-engine applications, where pixel timing must remain synchronized with scanning, modulation, and image-processing systems. Its frequency-synthesizer architecture makes it relevant where adjustable clock generation and deterministic reference locking are required. Because exact operating limits and programming electrical characteristics are defined by the manufacturer datasheet, system designs should verify output-frequency range, reference-input requirements, jitter, supply voltage, and acquisition time against the intended optical configuration. Typical deployments include laser projection engines, scanning-laser systems, optical inspection equipment, and image-generation assemblies. In each case, the clock generator provides the programmable timing foundation needed to coordinate pixel generation with downstream drivers and controllers. The integration of PLL synthesis and pixel-clock generation is particularly useful when component count, board area, and synchronization control are important design constraints. A robust implementation should route the reference clock cleanly, keep programming-interface traces away from sensitive feedback paths, and follow the recommended bypass-capacitor and grounding layout in the manufacturer datasheet. Designers should also validate startup, lock behavior, and output jitter across the complete temperature range of the assembled laser engine rather than evaluating only nominal bench conditions. This product page combines the device identity, package information, application engineering guidance, datasheet links, and cross-reference findings into a design-focused reference. It also distinguishes the verified operating concept of the ICS1574BM from specifications that must be confirmed directly in the manufacturer datasheet before schematic release or production qualification.

Запрос цены Контакты
ICS180M-01 - Low EMI Clock Generator | Renesas Electronics
ICS180M-01

ICS180M-01 - Low EMI Clock Generator | Renesas Electronics

The Renesas Electronics ICS180M-01 is a low-EMI, single-output spread-spectrum clock generator with a maximum output frequency of 28 MHz in an 8-pin SOIC package. It accepts either a clock or crystal input, produces a CMOS output, and provides a 1:1 input-to-output ratio. The device uses a proprietary combination of analog and digital phase-locked-loop technology to generate a low-EMI output clock. A spread-spectrum clock generator is a clock and timing IC that varies clock energy over a controlled frequency band. This technique reduces narrowband electromagnetic emissions by distributing clock energy across multiple frequencies rather than concentrating it around one carrier. In the broader semiconductor hierarchy, the ICS180M-01 belongs to clock and timing ICs, PLL-based clock synthesis, and broader frequency-generation and timing-control devices. The ICS180M-01 supports both clock and crystal input, giving a designer flexibility when the board already contains a reference oscillator or requires operation from a crystal. Its single CMOS output is suitable for systems that need one low-EMI clock domain. The 28 MHz maximum output frequency covers applications requiring moderate-speed digital clock distribution, although the minimum operating frequency and detailed timing limits are not stated in the available product records. The central architectural feature is the proprietary mix of analog and digital PLL technology. A PLL locks the generated output to the selected reference, while spread-spectrum modulation controls the clock spectrum and reduces electromagnetic interference concentration. The device contains one clock-generation circuit, and its stated 1:1 input-to-output ratio indicates that the output frequency follows the input reference without a stated frequency multiplication or division ratio. Typical uses include EMI-sensitive digital control systems, communications equipment, industrial electronics, and clock-distribution subsystems in which reducing narrowband clock radiation is important. The device can also serve as a low-EMI reference-clock source in equipment with multiple digital subsystems, provided the reference frequency and all timing requirements remain within the device's operating limits. PCB implementation should preserve a short, controlled return path from the input reference and provide a clean supply connection to the clock generator. Decoupling should follow the manufacturer application guidance, and unused input or output states should be handled according to the datasheet rather than inferred from the brief device description. Differential clock-impedance requirements should be checked before using the CMOS output in a high-speed or length-sensitive topology. This product record combines the device's key functional characteristics, sourcing information, and design-oriented comparison points. It also distinguishes the confirmed 180M-01LF drop-in candidate from unverified similarly named clock ICs, helping engineers identify replacements without confusing functional similarity with guaranteed pin compatibility.

Запрос цены Контакты
ICS180M-03 - 28MHz Low EMI Clock Generator | Renesas
ICS180M-03

ICS180M-03 - 28MHz Low EMI Clock Generator | Renesas

Renesas ICS180M-03 is a low-EMI spread-spectrum clock generator that accepts a clock or crystal input and produces a CMOS output clock with a maximum frequency of 28 MHz. The device uses mixed analog and digital phase-locked-loop technology to reduce electromagnetic interference. It is packaged in an 8-pin SOIC measuring 0.154 inch, or 3.90 mm, in width and operates from 3.135 V to 5.5 V. A spread-spectrum clock generator is a clock and timing IC that deliberately varies clock frequency over a defined range. This frequency spreading distributes spectral energy across multiple bins, reducing the peak conducted and radiated emissions produced by a narrowband digital clock. The ICS180M-03 belongs to the clock generator, PLL, and frequency-synthesizer hierarchy within clock and timing semiconductor products. The principal features of the ICS180M-03 include one clock-generating circuit, support for either clock or crystal inputs, CMOS output logic, and a 1:1 input-to-output frequency ratio. Its maximum operating output frequency is 28 MHz. These characteristics make it suitable for systems that require a low-EMI reference clock while retaining a conventional, single-output clock architecture. Internally, the device combines analog and digital phase-locked-loop functions. The PLL locks the generated output to the external clock or crystal reference, while spread-spectrum operation broadens the output spectrum and lowers its peak frequency concentration. The manufacturer datasheet describes this combination as a method for producing a low-EMI output clock while preserving accurate frequency generation. Typical applications include EMI-sensitive digital equipment, interface and communication modules, embedded control systems, and general-purpose clock-distribution designs. In each case, the part can provide the system timing reference while limiting narrowband emissions from the associated clock line. The 8-SOIC surface-mount package also supports standard automated PCB assembly and compact board-space utilization. When designing around the ICS180M-03, preserve the recommended input, output, and decoupling connections described in the manufacturer datasheet. Pay particular attention to crystal or clock-source stability because a phase-locked-loop generator derives its output from that reference. Confirm the intended supply voltage, output loading, trace topology, and EMI target before releasing the PCB layout. This product page combines the device specifications, sourcing guidance, application context, and practical design considerations engineers need when evaluating the ICS180M-03 for a low-EMI clock-generation design.

Запрос цены Контакты
ICS180M-51 - 28MHz Low EMI Clock Generator | Renesas
ICS180M-51

ICS180M-51 - 28MHz Low EMI Clock Generator | Renesas

The Renesas Electronics ICS180M-51 is a low-EMI single-output spread-spectrum clock generator that operates from a clock or crystal input. It combines IDT proprietary analog and digital phase-locked-loop technology, supports a maximum frequency of 28 MHz, and provides a CMOS output with a 1:1 input-to-output ratio. The device is offered in an 8-pin SOIC package. A clock generator is an integrated circuit that produces a stable timing reference for digital systems. It may accept an existing reference clock or a crystal and use a phase-locked loop, or PLL, to create a related output frequency. Clock generators are used to support processor timing, data conversion, communications, storage, and other digital subsystems. The ICS180M-51 belongs to the clock generator and timing-IC hierarchy rather than the general-purpose logic IC category. The central feature of the ICS180M-51 is its low-EMI output. According to the ICS180-51 datasheet, the device offers center-spread selections of ±0.625% and ±1.875%. These selections allow a clock's spectral energy to be distributed across a wider frequency range, which can reduce the peak magnitude of narrowband emissions when used as an EMI mitigation technique. The single output stage uses CMOS signaling and has a listed 1:1 input-to-output ratio. The ICS180-51 combines analog and digital PLL functions to derive its output from a clock or crystal input. This architecture allows a single device to operate as a low-EMI clock generator rather than requiring a separate fixed-frequency oscillator arrangement. The Renesas datasheet also identifies related MK1714-01 and MK1714-02 devices as references for a wider selection of input frequencies and multipliers when a design requires more flexible frequency translation than the ICS180-51 provides. Typical uses include EMI-sensitive digital equipment, communications equipment, and systems requiring a low-EMI clock derived from an existing reference. The device is also suitable where spread-spectrum clocking is used to reduce discrete spectral components. It can serve as a timing reference for processors, interface circuits, converters, and other clocked digital logic where a CMOS output at up to 28 MHz is required. When designing around the ICS180M-51, first confirm that the source frequency, selected spread mode, and required output frequency are supported by the device configuration. Place the clock input and output traces for controlled impedance and maintain short return paths to the device ground pins. Verify conducted and radiated emissions at the finished-product level because spread-spectrum timing alone does not establish regulatory compliance. This page consolidates the device type, operating limits, spread-spectrum selections, package information, sourcing guidance, and design cautions into one engineering reference. It also provides practical application analysis, alternative-part qualification guidance, and a structured comparison framework for evaluating the ICS180M-51 against other low-EMI clock-generator options.

Запрос цены Контакты
ICS2402M - Multiplier Zero Delay Buffer | Renesas
ICS2402M

ICS2402M - Multiplier Zero Delay Buffer | Renesas

The Renesas ICS2402M is a multiplier and zero-delay buffer integrated circuit with one single-ended LVCMOS output, supplied in an 8-pin SOIC package. The device uses ICS proprietary analog/digital phase-locked-loop techniques to multiply an input clock and reproduce a buffered clock output with low propagation delay. Its clock-buffer function makes it suitable for clock distribution, frequency conversion, communications, industrial control, and other systems requiring a multiplied or redistributed clock signal. A zero-delay buffer, or ZDB, is a clock and timing semiconductor that combines frequency multiplication or conditioning with buffered clock propagation. In the broader product hierarchy, ICS2402M belongs to clock and timing ICs and ultimately to the semiconductor category. Unlike a passive resistor-and-capacitor delay line, an active ZDB uses PLL techniques to establish the output relationship and provide a low-delay clock output. The verified product information identifies the ICS2402M as a multiplier and zero-delay buffer, with one LVCMOS output and a single-ended signal arrangement. The 8-SOIC package supports conventional surface-mount PCB assembly. Verified distributor information also identifies the component as lead-free and RoHS compliant. Exact operating limits, supply-voltage range, supported multiplication ratios, frequency range, output impedance, and timing tolerances were not present in the supplied source excerpts and therefore require confirmation from the manufacturer datasheet before design release. Technically, the ICS2402M integrates analog and digital PLL methods to multiply a reference clock while buffering the result. This architecture is intended to reduce the timing penalty normally encountered when a system must distribute a clock derived from a lower-frequency reference. The single-ended LVCMOS interface can simplify connection to conventional digital logic, but signal-integrity review remains necessary because PLL multipliers can amplify supply noise and produce clock-related harmonics. Typical uses include processor and communications clock generation, frequency-interface bridging, industrial data-acquisition systems, and retrofit designs requiring a clock output derived from an existing reference. In each case, the designer must confirm that the selected multiplier ratio, input frequency, output frequency, and supply voltage fall within the limits documented for the exact ICS2402M ordering configuration. For implementation, begin by reviewing the pin assignment and recommended decoupling in the manufacturer datasheet, then validate the output waveform with the intended clock load. Keep the clock trace short where possible, provide a clean return path, and account for PLL lock and startup behavior in the system timing budget. Because the verified excerpts do not provide the complete timing table, board release should be conditional on checking the official electrical characteristics and reference circuit. This product record combines verified device identity, package, interface, regulatory, and sourcing information with application-specific design guidance. It also separates confirmed facts from parameters that remain unavailable, helping engineers distinguish source-backed characteristics from values that still require datasheet confirmation.

Запрос цены Контакты
ICS252PM - 200MHz Dual-Output Clock Synthesizer | Renesas
ICS252PM

ICS252PM - 200MHz Dual-Output Clock Synthesizer | Renesas

The Renesas Electronics ICS252PM is a field-programmable dual-output spread-spectrum VersaClock synthesizer with an operating output-frequency range up to 200 MHz in an 8-SOIC package. The device generates two independently programmable output frequencies and is intended for clock and frequency-distribution systems requiring programmable frequency generation with spread-spectrum clocking. A clock synthesizer is a clock-and-timing integrated circuit that generates or distributes one or more related clock signals. In the broader hierarchy, ICS252PM belongs to the clock generator and frequency synthesizer family, within clock and timing ICs and ultimately the semiconductor category. Its dual-output architecture can reduce the number of separate oscillator and distribution components required in a system. The verified product information identifies ICS252PM as a low-cost, field-programmable, dual-output clock synthesizer capable of generating two output frequencies from 314 kHz to 200 MHz. The 200 MHz upper limit makes the device applicable to communication equipment, storage systems, computer peripherals, and other systems requiring a programmable clock. Spread-spectrum operation can reduce peak spectral concentration, although exact modulation settings and implementation limits must be confirmed in the manufacturer datasheet. The ICS252PM uses independently programmable output stages rather than a fixed-frequency oscillator arrangement. This allows one device to serve multiple clock domains when two related but unequal frequencies are required. Because it is a digital-programmable clocking component, board design should account for trace propagation, output loading, supply integrity, and EMI behavior associated with high-frequency clock distribution. The part is offered in an 8-SOIC package, providing a conventional surface-mount footprint for PCB assembly. In an 8-SOIC, the exact pin names, programming interface, supply voltage, output-drive capability, operating-temperature range, and electrical limits are not supplied in the verified excerpts and are therefore identified as data needed rather than estimated. Typical uses include clock generation for networking and communication equipment, read/write timing in storage systems, industrial control electronics, and embedded computing platforms. Validate the required frequency range, jitter, skew, supply voltage, and output configuration against the complete manufacturer datasheet before releasing a production design. This product record combines verified distributor identification, package and frequency information, sourcing links, application guidance, and practical selection criteria. It distinguishes explicitly verified facts from parameters that still require confirmation, helping engineers avoid unsupported assumptions while locating an ICS252PM replacement or equivalent.

Запрос цены Контакты
ICS270PG - 200MHz Triple-PLL VCXO Clock Synthesizer | Renesas
ICS270PG

ICS270PG - 200MHz Triple-PLL VCXO Clock Synthesizer | Renesas

Renesas Electronics Corporation ICS270PG is a field-programmable voltage-controlled crystal oscillator and triple-PLL clock synthesizer that generates up to eight high-quality, high-frequency clock outputs. It supports a maximum frequency of 200 MHz, uses a crystal input, provides CMOS outputs, includes PLL bypass, and is packaged in a 20-pin TSSOP measuring 0.173 inch, or 4.40 mm, wide. A clock synthesizer is an integrated timing device that accepts a reference source and derives one or more stable, programmable clock outputs for digital systems. A VCXO adds voltage-controlled frequency adjustment to the crystal reference, while a PLL multiplies or divides that reference to produce the required output frequencies. The ICS270PG combines both functions in a clock and timing IC, allowing one reference crystal to serve multiple clock domains. Its principal features include three phase-locked loops, PLL bypass capability, one internal clock circuit, a crystal reference input, and CMOS output signaling. The synthesizer can generate as many as eight outputs, including multiple reference clocks originating from a low-frequency reference source. This output flexibility reduces the number of separate oscillators required in systems requiring related but unequal clock rates. The triple-PLL architecture separates clock-generation functions that might otherwise require multiple oscillator and divider combinations. PLL bypass is useful during configuration, test, or operating conditions where a directly derived clock path is preferred. CMOS outputs are suitable for interfacing with modern digital logic, while the 200 MHz maximum output frequency supports demanding processor, communications, data-conversion, and industrial control clock trees. Typical applications include communications infrastructure, instrumentation, industrial automation, test and measurement equipment, data-acquisition systems, and embedded control platforms. In each case, the device can centralize multiple clock requirements around a crystal reference and provide programmable outputs instead of requiring a separate oscillator for each frequency domain. The multiple reference outputs can support communication links, data converters, memory interfaces, and digital control logic within one clock tree. The principal design consideration is the device's programmed configuration and the resulting relationships among its three PLLs, reference outputs, and output dividers. Review the manufacturer datasheet's pin-description table, recommended external components, clock-output constraints, and programming procedure before laying out a new board. PCB placement should minimize clock traces and keep the crystal and associated components close to the device. This product page summarizes the documented architecture, package information, output capability, and practical design considerations of the ICS270PG. It also distinguishes verified technical facts from details that still require confirmation from the manufacturer datasheet, helping engineers plan the architecture without overlooking programming, layout, or qualification work.

Запрос цены Контакты
ICS271PG - Triple PLL VCXO Clock Synthesizer | Renesas
ICS271PG

ICS271PG - Triple PLL VCXO Clock Synthesizer | Renesas

The Renesas Electronics ICS271PG is a triple-PLL, field-programmable VCXO clock synthesizer that generates up to six high-quality clock outputs and operates up to 200 MHz in a 20-pin TSSOP package. It accepts a crystal input, provides CMOS outputs, supports PLL bypass, and combines one clock-synthesis circuit with multiple reference and high-frequency outputs. These characteristics make it suitable for systems that require flexible clock generation from a low-frequency crystal source. A VCXO, or voltage-controlled crystal oscillator, is a clock-generation technique in which an oscillator’s frequency can be controlled by an external voltage. A field-programmable VCXO clock synthesizer extends that concept by combining crystal-referenced timing with programmable phase-locked loops and selectable output divisions. Within the broader hierarchy, the ICS271PG belongs to the clock and timing IC category, specifically the PLL and frequency-synthesizer class, and can replace multiple discrete crystal and oscillator arrangements when system designers need several related frequencies from one reference. Key features include three PLL capability, up to six generated clock outputs, a maximum frequency of 200 MHz, CMOS output logic, crystal input, and PLL bypass operation. The six-output architecture supports systems that need both reference clocks and higher-frequency working clocks. Field programming allows the device to be configured for different output requirements, while PLL bypass provides a path for systems that need to select between synthesized and direct-reference operating conditions during design or validation. Technically, the ICS271PG uses a crystal-referenced architecture with programmable PLL and output stages. The low-frequency crystal source establishes a stable reference from which the internal synthesis circuitry can derive multiple clock outputs. CMOS output signaling supports integration with digital logic operating in the same clock domain. Because the device is controlled through VersaClock software according to its documentation, configuration should be completed with the intended output frequencies, divider relationships, and operating modes validated together rather than selected independently. Typical applications include communications equipment, interface controllers, digital signal processing systems, test and measurement instruments, and embedded systems that require several coordinated clock outputs. It can also serve clock-distribution designs where a central synthesizer offers a more scalable alternative to multiple separately sourced oscillators. In each case, the main design benefits are centralized referenceing and programmable output relationships. The primary design consideration is preserving clean, deterministic clock behavior across every enabled output. Use the manufacturer’s configuration procedure, validate each output against its assigned load, and check startup and bypass transitions with the final system timing budget. PCB layout should follow the datasheet guidance for crystal connections, supply decoupling, and output routing to minimize jitter and crosstalk. This page organizes the device’s clock-generation characteristics, drop-in candidate listings, application guidance, and engineering design considerations. It is intended to help engineers compare the ICS271PG with equivalent field-programmable clock synthesizers before committing to a board design or production sourcing plan.

Запрос цены Контакты
ICS275PG - 200MHz Triple-PLL VCXO Clock Synthesizer | Renesas
ICS275PG

ICS275PG - 200MHz Triple-PLL VCXO Clock Synthesizer | Renesas

The Renesas Electronics ICS275PG is a triple-PLL field-programmable VCXO clock synthesizer with a maximum output frequency of 200 MHz, supplied in a 16-pin TSSOP surface-mount package. It operates from a 3.135 V to 3.465 V supply, accepts a crystal reference input, provides CMOS clock outputs, and can generate as many as four high-quality clock outputs. A VCXO, or voltage-controlled crystal oscillator, is a clock-generation architecture that combines a crystal oscillator with voltage-controlled frequency adjustment. A PLL, or phase-locked loop, locks an internal oscillator to a reference signal and provides programmable frequency synthesis. The ICS275PG therefore belongs to the clock synthesizer and frequency generator hierarchy, where it functions as a timing IC for communications, industrial control, and digital processing systems. The device's principal features include three PLL sections, PLL bypass capability, a crystal reference input, CMOS output technology, and operation up to 200 MHz. The multiple output architecture allows one reference source to feed several related clock domains. Its field-programmable nature also permits output-frequency and phase relationships to be configured for systems that require more flexibility than a fixed-frequency oscillator. The ICS275PG uses a 3.3 V-class supply range centered on the conventional 3.3 V operating point. Its specified 0°C to 70°C temperature range supports commercial-temperature equipment, although the datasheet pin description and detailed electrical limits must be checked before applying the device outside that range. The TSSOP-16 package is intended for surface-mount assembly and supports compact board layouts without requiring a through-hole package. Typical uses include generating reference and communication clocks, distributing clocks among multiple digital subsystems, and synthesizing programmable clock outputs for test and measurement equipment. It is particularly relevant where several outputs must remain phase-related to a common crystal reference. The CMOS outputs are suited to digital logic interfaces when their voltage, timing, and drive requirements are checked against the receiving circuitry. PCB implementation should preserve a short return path from each supply connection to ground, place decoupling capacitance close to the device, and route clock outputs as controlled-impedance traces when timing margin is limited. Follow the manufacturer's recommended crystal and load-capacitance configuration because oscillator startup, frequency accuracy, and loop stability depend on the complete reference network rather than the IC alone. This page organizes the ICS275PG's clock-generation capabilities, package information, application guidance, and design considerations. It also provides an explicit framework for evaluating replacement requirements, including package compatibility, pin compatibility, supply voltage, output type, and maximum operating frequency.

Запрос цены Контакты
ICS276PG - Triple PLL 200MHz VCXO | Renesas Electronics
ICS276PG

ICS276PG - Triple PLL 200MHz VCXO | Renesas Electronics

The Renesas Electronics ICS276PG is a triple-PLL field-programmable VCXO clock synthesizer with three clock outputs, a maximum frequency of 200 MHz, crystal input, and CMOS output in a 16-pin TSSOP package. It operates from a 3.135 V to 3.465 V supply and includes a PLL bypass function for flexible clock-generation architectures. A VCXO is a voltage-controlled crystal oscillator, while a clock synthesizer combines oscillator and programmable frequency-generation functions into a timing IC. The ICS276PG belongs to the clock and frequency synthesizer category, within the broader clock and timing IC and semiconductor hierarchies. Its architecture is intended to generate multiple related clock outputs from a reference source while supporting frequency programming and PLL bypass operation. Three independently available output positions provide flexible clock distribution for systems that require multiple reference or working clocks. A maximum output frequency of 200 MHz makes the device suitable for communications, control, test, instrumentation, and digital processing systems operating from a single reference crystal. CMOS outputs support integration with modern digital logic, while the field-programmable architecture simplifies adaptation across different clock plans. The ICS276PG uses a single PLL circuit with bypass capability and accepts a crystal reference. PLL synthesis enables the device to derive one or more output frequencies from the reference, while bypass provides a path for configurations that require the reference clock directly. The 3.135 V minimum and 3.465 V maximum supply limits indicate a narrow, regulated 3.3 V operating environment, so the system supply must remain within that range during startup, steady-state operation, and frequency changes. Typical uses include communications transceiver clocking, instrumentation clock trees, embedded-control reference generation, FPGA or processor timing support, and multi-output laboratory systems. Its three-output architecture is especially useful when several logic domains need coherent clocks, although jitter, supply-noise behavior, output configuration, and programming details must be checked against the complete manufacturer datasheet before high-volume clock-tree deployment. A key implementation consideration is the relationship between the 3.3 V supply tolerance and the device specification. Decoupling should be placed close to the supply pins, the crystal network must follow the recommended layout, and every output must be checked for the required frequency, amplitude, and loading. Avoid assigning functions to a pin until its output configuration and routing requirements have been confirmed in the pin-description table.

Запрос цены Контакты
ICS280PG - 200MHz Triple PLL Spread Spectrum Clock Generator | Renesas Electronics
ICS280PG

ICS280PG - 200MHz Triple PLL Spread Spectrum Clock Generator | Renesas Electronics

The Renesas Electronics ICS280PG is a field programmable triple-PLL spread spectrum clock synthesizer that generates up to four high-quality CMOS clock outputs with a maximum frequency of 200 MHz, packaged in a 16-pin TSSOP (0.173 in / 4.40 mm wide) surface-mount package. A clock generator is a timing IC that converts a single reference input into multiple synchronized output clocks. A clock synthesizer adds phase-locked loop (PLL) multiplier and divider stages so one low-frequency crystal or clock reference can drive many higher or lower frequency domains. A spread spectrum clock generator additionally dither the output edge position over time, spreading electromagnetic energy across a band and reducing peak radiated emissions. The ICS280PG combines all three functions in one device: reference conditioning, triple-PLL synthesis, and four-way clock fanout with spread spectrum modulation. Key features of the ICS280PG include three independent PLL blocks with a bypass mode, up to four CMOS outputs, a maximum output frequency of 200 MHz, and field programmability of the synthesis and modulation parameters. Accepting either a crystal or an external clock as reference, the device lets a designer change output frequencies and modulation profiles without changing the board layout. Its 16-TSSOP body keeps the footprint compact enough for cost-sensitive consumer, industrial and networking equipment while supporting surface-mount assembly at line speed. Architecturally the part pairs a programmable reference stage with three PLL multipliers and dividers feeding four CMOS output buffers. Because each PLL can be bypassed, the same device can pass the reference through unmodified for one clock domain while synthesizing two additional domains, which simplifies clock tree design in systems that mix legacy and modern clock requirements. CMOS output drive gives rail-to-rail compatible levels for downstream CMOS logic, and spread spectrum modulation reduces the spectral peak of the fundamental without changing the average output frequency. Typical applications include server and storage platform clock trees, set-top box and digital set-top clocking, networking equipment with multiple clock domains, industrial control modules, and any consumer or embedded product where radiated emissions must be reduced to meet EMC limits while keeping a single reference source. When designing around the ICS280PG, treat the reference input and output routing as a controlled-impedance clock network and check the datasheet pin description table before assigning tracks; spread spectrum modulation only reduces emissions if the downstream traces and connectors do not act as antennas. This page adds practical context that a manufacturer datasheet alone does not provide: a parameter-by-parameter comparison table, drop-in ordering alternatives with the temperature and packaging differences made explicit, and design notes covering PLL bypass, spread spectrum settings and EMI verification practice.

Запрос цены Контакты
ICS281PG - 200 MHz Triple-PLL Clock Synthesizer | Renesas
ICS281PG

ICS281PG - 200 MHz Triple-PLL Clock Synthesizer | Renesas

Renesas Electronics ICS281PG is a field-programmable triple-PLL spread-spectrum clock synthesizer with a maximum output frequency of 200 MHz, one synthesizer circuit, CMOS outputs, and a 16-pin TSSOP package measuring 4.40 mm in width. It accepts either a clock or crystal reference input and provides a programmable input-to-output ratio of 1:3. A clock synthesizer generates stable timing signals from a lower-frequency reference and, in this case, uses three phase-locked loops to produce multiple high-frequency outputs. The PLL-based approach belongs to the clock and timing IC hierarchy, where frequency synthesis supports processor clocks, communications infrastructure, storage interfaces, and other digital systems requiring controlled clock distribution. The principal feature is the combination of triple-PLL architecture, field programmability, and spread-spectrum clock generation. Bypass operation gives the design team a way to move between the synthesized and reference-clock paths, while CMOS output signaling supports integration with compatible digital logic. The 200 MHz maximum frequency makes the device suitable for clock trees operating below that limit. The ICS281 family provides up to three clock outputs, including multiple reference clocks according to the manufacturer documentation. The 1:3 ratio identifies a supported clock-generation relationship, while field programming allows configuration through the device's programming interface. These features make the ICS281PG more versatile than a fixed-frequency oscillator for systems that require programmable timing and controlled spectral spreading. Typical applications include communications equipment, network interface clock trees, high-speed digital processing systems, storage controllers, and clock-generation blocks in industrial equipment. Spread-spectrum operation can reduce narrowband emissions, making the device useful when electromagnetic compatibility is important. Designers must still verify each output's frequency, jitter, duty-cycle, and modulation limits against the target system requirements. The principal design consideration is preserving clean, low-jitter reference distribution to every PLL. Use the recommended reference and loop-filter network from the manufacturer datasheet, keep clock traces short, and provide solid return paths beneath high-speed signals. Decoupling should be placed close to supply pins, while output buffering or additional clock drivers may be needed for fanout beyond the device's intended loading. This page consolidates the documented 200 MHz frequency capability, triple-PLL architecture, programming features, package data, sourcing guidance, and practical clock-tree considerations. It also distinguishes confirmed drop-in candidates from lower-confidence engineering options so that schematic and PCB decisions can be checked before production release.

Запрос цены Контакты
ICS290PG - 200MHz Triple PLL Clock Synthesizer | Renesas
ICS290PG

ICS290PG - 200MHz Triple PLL Clock Synthesizer | Renesas

Renesas Electronics ICS290PG is a field-programmable, triple-PLL spread-spectrum clock synthesizer with a maximum frequency of 200 MHz, CMOS outputs, and support for clock or crystal inputs. The device generates up to eight high-quality high-frequency clock outputs, including multiple reference clocks, and is packaged in a 20-pin TSSOP package identified as PGG20. Its programmable architecture makes it suitable for systems that require controlled clock generation, frequency synthesis, or spread-spectrum operation. A clock synthesizer is an integrated circuit that derives one or more stable timing signals from a reference clock or crystal. Clock and timing ICs sit within the broader timing-control hierarchy used by processors, communications equipment, storage systems, and test instrumentation. A PLL-based synthesizer can multiply, divide, or otherwise derive clock frequencies while providing programmable output arrangements and phase-related reference signals. The ICS290PG uses three PLL sections to produce multiple related outputs from a common reference source. Its operating input types are clock or crystal, while its output logic is CMOS. The stated input-to-output ratio reaches 1:8, and the maximum generated frequency is 200 MHz. Spread-spectrum capability can help redistribute clock energy across a frequency band, which is useful where controlled spectral spreading is desirable for system timing, interface, or electromagnetic-interference considerations. The PGG20 package offers 20 pins and an operating temperature range from -40 °C to +85 °C. The device is identified as lead-free and is supplied in a tube for the cataloged ordering configuration. Pin functions, programmable register details, reference-frequency limits, output configurations, jitter characteristics, supply-voltage range, and package dimensions must be confirmed in the manufacturer datasheet before a new board layout is released. Typical clock-tree applications include processor and controller timing, communications equipment, data-converter systems, storage controllers, and instrumentation. In a communications design, the ICS290PG can create a system clock and reference outputs from one source. In processor-based equipment, it can provide programmable frequencies while reducing the number of independent oscillators and associated distribution components. The main design consideration is validating the complete clock architecture. The reference input, PLL programming values, output enable sequence, trace topology, and downstream jitter requirements must be evaluated together. Short, controlled clock routes and proper return paths help preserve signal quality, while an output-termination strategy should follow the impedance of the PCB and the receiving device. This page combines verified device characteristics, application guidance, pin and package constraints, comparison fields, and replacement guidance. It is structured to help engineers identify whether the ICS290PG meets the required frequency, output-count, logic, temperature, and package conditions before committing a PCB footprint or production BOM.

Запрос цены Контакты
ICS291PG - 200MHz Triple-PLL Spread-Spectrum Clock | Renesas
ICS291PG

ICS291PG - 200MHz Triple-PLL Spread-Spectrum Clock | Renesas

The Renesas Electronics ICS291PG is a triple-PLL field-programmable spread-spectrum clock synthesizer with a maximum output frequency of 200 MHz, CMOS outputs, clock or crystal input, and PLL bypass capability. It is packaged in a 20-pin TSSOP package measuring 0.173 inches, or 4.40 mm, in width. The device generates up to six high-quality, high-frequency clock outputs and includes multiple reference-clock functions for clock-tree and interface designs. A spread-spectrum clock synthesizer is a clock-generation IC that varies clock timing over a programmed range to reduce peak electromagnetic emissions. This technique is useful in systems where reducing concentrated electromagnetic interference helps improve signal integrity and regulatory compliance. The ICS291PG is a clock/frequency synthesizer IC with one clock-generation circuit, PLL functionality with bypass, and an input that can be a clock or crystal. The ICS291PG is associated with clock generation, frequency synthesis, triple-PLL architecture, programmable spread spectrum, multiple output clocks, reference outputs, and CMOS interface support. Its maximum frequency is 200 MHz, and its listed output ratio range is 1 to 6. These characteristics make it relevant to communication equipment, storage systems, computing platforms, and other systems requiring multiple synchronized clocks from a common reference. The device uses a field-programmable configuration approach, allowing clock multiplication, division, spread-spectrum modulation, and output routing to be configured for a particular board requirement. The PLL-bypass path is important when a system needs to preserve a reference clock during startup, test, or mode transitions. Multiple outputs can reduce the need for separate clock-generation components while supporting reference and forwarded clock requirements. Typical implementation involves supplying a stable reference clock or crystal, configuring the internal PLL and output dividers, and routing each CMOS clock output to the relevant subsystem. Board-level design should account for trace impedance, return paths, clock jitter, output loading, and decoupling. Keep clock traces short where practical, provide continuous reference planes, and maintain a solid ground return beneath high-frequency clock routing. The ICS291PG is best suited to designs needing multiple clocks, programmable frequency relationships, or spread-spectrum clock generation within a compact surface-mount package. For a new design, verify the complete electrical limits, configuration method, pin-level signal names, and timing specifications in the current manufacturer datasheet before releasing production layouts.

Запрос цены Контакты