ADM230LAN vs ADM230LAQ Сравнение
Подробное сравнение бок о бок ADM230LAN от Analog Devices и ADM230LAQ от Analog Devices. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Сравнение характеристик
| Параметр | ADM230LAN | ADM230LAQ |
|---|---|---|
| Бренд | Analog Devices | Analog Devices |
| Категория | Interface ICs | Interface ICs |
| Статус жизненного цикла | Unknown | Активен |
| Product Type | Dual RS-232 driver and receiver interface IC | 5 V powered CMOS RS-232 drivers/receivers |
| Напряжение питания | 5 V | 5 V |
| Supply Configuration | Single positive 5 V supply | — |
| Logic Technology | CMOS | — |
| Maximum Data Rate | 120 kB/s | 120 kB/s |
| RS-232 Output Swing | 9 V | — |
| DC-DC Converter | On-board | — |
| Charge-Pump Capacitor Value | 1 F | — |
| Power Shutdown | Low-power shutdown supported | — |
| Receiver Operation During Shutdown | Receivers remain active | — |
| Receiver Input Voltage | 30 V | 30 V |
| RS-232 Standards | EIA-232-E and V.28 | — |
| Корпус | PDIP-14 | 20-CDIP, 0.300 in (7.62 mm) |
| Тип монтажа | Through-hole | Through-hole |
| Количество выводов | 14 pins | — |
| Статус RoHS | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Диапазон рабочих температур | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Ток потребления | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| Number of Channels | — | 5 channels |
| Driver Output Swing | — | 9 V |
| Receiver Input Current | — | 1 A |
| Converter Capacitor | — | 1 F |
| Shutdown Feature | — | Low-power shutdown with receivers active |
| Onboard Converter | — | DC-DC converter |
| RS-232 Compliance | — | EIA-232-E and V.28 |
| Logic Family | — | CMOS |
| Number of Terminals | — | 20 terminals |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |