ATMEGA329PA-AUR vs ATMEGA329P-20AU Сравнение
Подробное сравнение бок о бок ATMEGA329PA-AUR от Microchip Technology и ATMEGA329P-20AU от Microchip Technology. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Microchip Technology
ATMEGA329PA-AUR - 8-bit AVR MCU, 32KB Flash, 20MHz, 64-TQFP | Microchip
ATMEGA329PA-AUR ✓ АктивенMicrochip Technology
ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64
ATMEGA329P-20AU ✓ АктивенСравнение характеристик
| Параметр | ATMEGA329PA-AUR | ATMEGA329P-20AU |
|---|---|---|
| Бренд | Microchip Technology | Microchip Technology |
| Категория | Microcontrollers | Microcontrollers |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $5,94 | $4,71 |
| Core Architecture | 8-bit AVR RISC (Harvard) | AVR (8-bit RISC, Harvard) |
| Family | ATmega (picoPower) | — |
| Program Memory (Flash) | 32 KB | 32 KB (16K x 16), In-System Programmable with RWW |
| EEPROM | 1 KB | 1 KB |
| SRAM | 2 KB | 2 KB (2K x 8) |
| Maximum CPU Speed | 20 MHz | — |
| Напряжение питания | 2.7 V to 5.5 V (4.5 V to 5.5 V at 20 MHz) | — |
| General-Purpose I/O | 54 | — |
| Timers/Counters | Two 8-bit + One 16-bit | — |
| ADC | 8-channel, 10-bit | 10-bit, up to 8 single-ended channels |
| Serial Interfaces | USART, SPI, TWI (I2C) | — |
| LCD Controller | Up to 4x25 segments (integrated) | — |
| Рабочая температура | -40C to +85C (Industrial) | -40C to +85C (industrial, -A suffix) |
| Корпус | 64-pin TQFP (14x14 mm, 0.8 mm pitch) | 64-pin TQFP (14x14 mm, 0.8 mm pitch) |
| Тип монтажа | Surface Mount | Surface Mount |
| Programming Interface | JTAG / debugWIRE / ISP | — |
| Статус RoHS | Compliant | Compliant (Pb-free / Green) |
| Уровень MSL | 3 (168 hours) | — |
| Instruction Set | — | 131 instructions, mostly single-cycle |
| Maximum Clock Speed | — | 20 MHz |
| Throughput | — | Up to 20 MIPS at 20 MHz |
| Supply Voltage (Vcc) | — | 2.7 V to 5.5 V (10 MHz max below 4.5 V; 20 MHz requires 4.5-5.5 V) |
| General-Purpose I/O Pins | — | 54 |
| General-Purpose Working Registers | — | 32 |
| PWM Channels | — | 6 |
| Communication Peripherals | — | 2x USART, 1x TWI (I2C), 1x SPI (also ISP) |
| Debug Interface | — | JTAG (IEEE 1149.1 compliant) |
| Power-Save Modes | — | Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby (picoPower) |
| QTouch Support | — | Yes (peripheral touch controller via library) |