ATMEGA88PV-10PU vs ATMEGA168PA-PU Сравнение
Подробное сравнение бок о бок ATMEGA88PV-10PU от Microchip Technology и ATMEGA168PA-PU от Microchip Technology. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Microchip Technology
ATMEGA88PV-10PU - AVR 8-bit MCU 8KB Flash 10MHz DIP-28 | Microchip
ATMEGA88PV-10PU ✓ АктивенMicrochip Technology
ATMEGA168PA-PU - 8-bit AVR MCU, 16KB Flash, 20MHz | Microchip
ATMEGA168PA-PU ✓ АктивенСравнение характеристик
| Параметр | ATMEGA88PV-10PU | ATMEGA168PA-PU |
|---|---|---|
| Бренд | Microchip Technology | Microchip Technology |
| Категория | Microcontrollers | Microcontrollers |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $1,35 | $1,86 |
| Core Architecture | AVR 8-bit RISC | 8-bit AVR RISC |
| Flash Memory | 8 KB (4K x 16) | — |
| EEPROM | 512 B | 512 B |
| SRAM | 1 KB | 1 KB |
| Максимальная тактовая частота | 10 MHz | 20 MHz |
| Supply Voltage Range | 1.8 V to 5.5 V | 2.7 V to 5.5 V |
| I/O Lines | 23 | — |
| Timers | 3 (two 8-bit, one 16-bit) | — |
| Serial Interfaces | USART, SPI, TWI (I2C-compatible) | — |
| Корпус | 28-PDIP | 28-PDIP (0.300 in, 7.62 mm), through-hole |
| Тип монтажа | Through Hole | Through Hole |
| Temperature Range | Industrial (-40C to +85C) | — |
| Instructions | 130, most single-cycle | 133, most single-cycle |
| In-System Programming | Yes (ISP, read-while-write) | — |
| Low Power Technology | picoPower | — |
| Life Cycle Stage | ACTIVE | Active |
| Статус RoHS | Compliant (Green) | [DATA_NEEDED: RoHS status] |
| Flash Program Memory | — | 16 KB (8K x 16) |
| General Purpose I/O Lines | — | 23 |
| Working Registers | — | 32 |
| Timers/Counters | — | 3 (with compare and PWM modes) |
| ADC | — | 10-bit, 6 channels |
| Communication Interfaces | — | USART, SPI, Two-Wire (I2C) |
| Packaging | — | Tube |
| Special Features | — | picoPower, brown-out detect, POR, watchdog, ISP, read-while-write |
| Диапазон рабочих температур | — | [DATA_NEEDED: operating temperature range] |