ATSAMA5D36-EK vs ATSAMA5D3-XPLD Сравнение
Подробное сравнение бок о бок ATSAMA5D36-EK от Microchip Technology и ATSAMA5D3-XPLD от Microchip Technology. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Microchip Technology
ATSAMA5D36-EK - SAMA5D36 Cortex-A5 536MHz MPU Evaluation Kit
ATSAMA5D36-EK ⚠ Последняя закупкаMicrochip Technology
ATSAMA5D3-XPLD - SAMA5D3 Cortex-A5 MPU Evaluation Kit | Microchip
ATSAMA5D3-XPLD ⚠ Последняя закупкаСравнение характеристик
| Параметр | ATSAMA5D36-EK | ATSAMA5D3-XPLD |
|---|---|---|
| Бренд | Microchip Technology | Microchip Technology |
| Категория | Development Boards | Development Boards |
| Статус жизненного цикла | Последняя закупка | Последняя закупка |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $479,20 | $105,90 |
| Product Type | Evaluation Board / Development Kit | Embedded Evaluation Board (Xplained Kit) |
| Supported MPU | Atmel SAMA5D36 (ARM Cortex-A5) | — |
| CPU Core | ARM Cortex-A5 with FPU | — |
| Maximum CPU Frequency | 536 MHz | — |
| On-chip Cache | 32 KB I-cache + 32 KB D-cache | — |
| Internal SRAM | 128 KB | — |
| External DRAM | 512 MB DDR2 / LPDDR | — |
| EEPROM | 64 KB | — |
| NAND Flash | 4 MB | — |
| NOR Flash | 16 MB | — |
| SPI DataFlash | 256 MB | — |
| Ethernet | MII / RMII (dual capable) | 2x 10/100/1000 GMAC |
| USB | USB Host + USB Device ports | 1x USB 2.0 Device, 2x USB 2.0 Host |
| Display Interface | TFT LCD connector | — |
| Camera Interface | CMOS camera connector | — |
| Boot / Programming | SAM-BA bootloader + JTAG | — |
| Supported Software | SAMA5D3 Softpack, Linux, Qt demos | — |
| Target Series | SAMA5D3 (SAMA5D31/D33/D34/D36) | — |
| Статус RoHS | Compliant | — |
| Target MPU | — | ATSAMA5D36 (ARM Cortex-A5) |
| Core | — | ARM Cortex-A5 with FPU |
| Maximum CPU Clock | — | 536 MHz |
| On-chip SRAM | — | 128 KB |
| Cache (I/D) | — | 32 KB each |
| External Memory Interface | — | DDR2 / LPDDR / LPDDR2 + NAND Flash + QSPI |
| Graphics Output | — | HDMI + parallel LCD |
| CAN | — | 2x CAN 2.0B |
| Storage | — | microSD slot + NAND Flash on-board |
| Expansion Headers | — | Arduino R3 + Xplained extension header |
| Debug Interface | — | On-board J-Link-OB (JTAG + SWD) + serial console |
| Operating System Support | — | Linux Mainline, Yocto Project, bare-metal C examples |
| Included Accessories | — | micro-AB to Type-A USB cable |
| Рабочая температура | — | 0C to +70C (commercial evaluation use) |
| Compliance | — | RoHS Compliant |