BTT3050EJXUMA1 vs BTS3134NHUMA1 Сравнение
Подробное сравнение бок о бок BTT3050EJXUMA1 от Infineon и BTS3134NHUMA1 от Infineon. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Сравнение характеристик
| Параметр | BTT3050EJXUMA1 | BTS3134NHUMA1 |
|---|---|---|
| Бренд | Infineon | Infineon |
| Категория | Power MOSFET Drivers | Power MOSFET Drivers |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $0,85 | $0,78 |
| Product Type | Smart Low-Side Power Switch | Smart Low-Side Power Switch |
| Family | HITFET+24V | — |
| Number of Channels | 1 | — |
| Switch Topology | Low-Side | — |
| Nominal Load Current | 4 A | — |
| Typical On-Resistance (RDS(on)) | 50 mΩ | — |
| Operating Voltage Range | 6 V to 36 V | — |
| Maximum Supply Voltage | [DATA_NEEDED: maximum VBB] | — |
| Input Type | Active High, Logic Level | — |
| Diagnostic Output | Yes (open-drain / status pin) | — |
| Operating Temperature Range (Junction) | -40 °C to +150 °C | — |
| Корпус | PG-TDSO-8-31 (exposed-pad SOIC-8) | PG-SOT223-4 (4-pin, 3+Tab) |
| Тип монтажа | Surface Mount | Surface Mount |
| Automotive Qualification | Yes (AEC-Q100) | AEC-Q100 |
| Protection Features | Overcurrent, Overtemperature, Short-Circuit, Overvoltage, Undervoltage Lockout, Latch | Over-current, Over-temperature, Over-voltage, ESD |
| ESD Protection | Yes | — |
| Статус RoHS | Compliant | Compliant |
| Manufacturer | — | Infineon Technologies |
| Топология | — | 1:1 N-Channel Switch/Driver |
| Maximum Operating Voltage | — | 42 V |
| Continuous Output Current | — | 3 A |
| On-State Resistance (R_DS(on)) | — | 50 mΩ typical |
| Input Logic Level | — | CMOS / TTL compatible |
| Диапазон рабочих температур | — | -40 °C to +150 °C |
| Status Flag Output | — | Yes (diagnostic feedback) |
| Technology | — | SIPMOS (vertical N-channel MOSFET + CMOS logic) |
| Packaging | — | Tape & Reel |
| Уровень MSL | — | [DATA_NEEDED: MSL level] |