EPC1604PC8 vs EPC1PC8 Сравнение
Подробное сравнение бок о бок EPC1604PC8 от Altera и EPC1PC8 от Altera. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Сравнение характеристик
| Параметр | EPC1604PC8 | EPC1PC8 |
|---|---|---|
| Бренд | Altera | Altera |
| Категория | Memory ICs | Memory ICs |
| Статус жизненного цикла | Obsolete | Obsolete |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $7,50 | $4,10 |
| Тип памяти | Serial Configuration EPROM (CMOS, UV-erasable) | OTP Configuration PROM (Non-volatile) |
| Density | 64 Kbit (64K x 1) | — |
| Maximum Access Time | 75 ns | — |
| Supply Voltage (Vsup) | 4.75 V to 5.25 V (5 V nominal); 3.3 V operation supported | — |
| Maximum Supply Voltage | 5.25 V | — |
| Supply Voltage (3.3 V mode) | 3.0 V to 3.6 V | — |
| Интерфейс | 4-pin serial (nCS, DCLK, DATA, OE) | — |
| Standby Current | Near-zero after configuration completes | — |
| Active Configuration Current | Low (CMOS process) | — |
| Рабочая температура | 0 C to +70 C (Commercial) | 0 C to +70 C (commercial) [DATA_NEEDED: full min/max range] |
| Корпус | 8-pin PDIP (DIP-8), through-hole, in-line | 8-pin PDIP (8-PDIP, 300 mil) |
| Number of Terminals | 8 | — |
| Package Style | IN-LINE, RECTANGULAR | — |
| Compatibility | Altera FLEX-class SRAM-based FPGAs (FLEX 8000, FLEX 10K) | — |
| Programming Method | Altera programming hardware; UV-erasable window (PC suffix variant) | — |
| Статус RoHS | Unknown (legacy through-hole PDIP part) | [DATA_NEEDED: RoHS compliance status] |
| Размер памяти | — | 1 Mbit (1,048,576 bits) |
| Supply Voltage (VCC) | — | 5.0 V (typical) |
| Configuration Interface | — | Altera proprietary serial (DATA, DCLK, OE, nCS) |
| Programmability | — | One-Time Programmable (OTP) |
| Тип монтажа | — | Through-Hole (THT) |
| Target FPGAs | — | ACEX 1K, APEX 20K/20KE/20KC, FLEX 10K/10KE/10KA, FLEX 6000/A |
| Pin Pitch | — | 2.54 mm (0.100 in) |
| Programming Hardware | — | Altera MasterBlaster / ByteBlaster (legacy programmer) |
| Configuration Mode | — | Serial (1-bit data, 1-bit clock) |
| Lead-Free | — | [DATA_NEEDED: lead-free / SnPb plating] |
| Уровень MSL | — | [DATA_NEEDED: moisture sensitivity level] |