EPC16QC-100T vs EPC16QC100DM Сравнение
Подробное сравнение бок о бок EPC16QC-100T от Altera и EPC16QC100DM от Intel. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Сравнение характеристик
| Параметр | EPC16QC-100T | EPC16QC100DM |
|---|---|---|
| Бренд | Altera | Intel |
| Категория | Memory ICs | Memory ICs |
| Статус жизненного цикла | Obsolete | NRND |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $14,50 | $15,85 |
| Тип памяти | Flash Configuration PROM (in-system programmable) | Non-volatile Configuration PROM (NOR flash) |
| Memory Density | 16 Mbit (2 Mbyte) | 16 Mbit (2 Mbyte) |
| Supported FPGA Families | Stratix, APEX II, APEX 20K, Mercury, ACEX 1K, FLEX 10K | — |
| Configuration Data Width | 8-bit or 16-bit (cascaded dual-device mode) | — |
| Configuration Modes | Serial (single device), Parallel (two cascaded devices) | — |
| Data Compression Support | Yes (35% to 55% bitstream reduction typical) | — |
| JTAG / Boundary Scan | IEEE 1149.1 compliant, in-system programmable | — |
| Напряжение питания | 3.3 V | — |
| Корпус | 100-pin PQFP (20 x 14 mm), 0.65 mm pitch | 100-pin PQFP (QFPA) |
| Рабочая температура | [DATA_NEEDED: Operating temperature range] | — |
| Cascade Interface | nCE / nOE handshake for multi-device chains | — |
| Programming Interface | JTAG (IEEE 1149.1) and serial | — |
| Endurance | [DATA_NEEDED: Program/erase cycle rating] | — |
| Data Retention | [DATA_NEEDED: Data retention specification] | [DATA_NEEDED: data retention years] |
| Статус RoHS | unknown | — |
| Lead-Free | unknown | — |
| Уровень MSL | [DATA_NEEDED: Moisture sensitivity level] | [DATA_NEEDED: MSL rating] |
| Тип монтажа | Surface Mount | — |
| Configuration Interface | — | Serial (SPI-compatible, Altera FPP mode) |
| Core Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| I/O Voltage (VIO) | — | 2.5 V / 3.3 V selectable |
| Output Voltage (VPP) | — | 1.8 V / 2.5 V / 3.3 V selectable |
| Maximum DCLK Frequency | — | 40 MHz |
| Cascadable | — | Yes (multi-device daisy chain via nCASC) |
| In-System Programming | — | Yes (IEEE 1532 / JTAG) |
| Program/Erase Cycles | — | [DATA_NEEDED: program/erase cycle endurance] |
| Диапазон рабочих температур | — | -40 C to +85 C (industrial) |
| Package Code | — | Q100 + DM suffix |
| Lead-Free / RoHS | — | [DATA_NEEDED: lead-free status] |
| Compatible FPGA Families | — | Stratix, Cyclone, APEX, ACEX |