EPC8Q100 vs EPC8Q1100 Сравнение
Подробное сравнение бок о бок EPC8Q100 от Altera и EPC8Q1100 от Altera. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Altera
EPC8Q1100 - 8 Mbit Enhanced Config Device for SRAM FPGAs | Altera
EPC8Q1100 ⚠ Последняя закупкаСравнение характеристик
| Параметр | EPC8Q100 | EPC8Q1100 |
|---|---|---|
| Бренд | Altera | Altera |
| Категория | FPGA & CPLD | FPGA & CPLD |
| Статус жизненного цикла | Obsolete | Последняя закупка |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $10,85 | $25,90 |
| Memory Density | 8 Mbit (8,388,608 bits) | 8 Mbit (8,388,608 bits) |
| Тип памяти | NOR Flash, One-Time-Programmable (OTP) via JTAG | — |
| Configuration Interface | Altera EPC serial (DATA, DCLK, nCS, nINIT_CONF, nSTATUS, DONE) | Altera Enhanced Config serial interface (DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE) |
| Supply Voltage VCC | 5.0 V (3.3 V core generated on-chip) | — |
| Internal Core Voltage | 3.3 V (on-chip LDO) | — |
| Maximum EPC Clock | 33 MHz | — |
| Programmability | In-system via IEEE 1149.1 JTAG | — |
| FPGA Compatibility | APEX 20K, APEX II, Cyclone, Cyclone II, Stratix, Stratix GX | — |
| Configuration Mode Support | FPP, PS, AS, JTAG (FPGA-dependent) | — |
| Program/Erase Endurance | [DATA_NEEDED: cycle count] | — |
| Data Retention | [DATA_NEEDED: minimum years] | [DATA_NEEDED: data retention years] |
| Диапазон рабочих температур | 0 C to +70 C (commercial) | — |
| Storage Temperature Range | [DATA_NEEDED: range] | — |
| Корпус | 100-pin PQFP (20 x 14 mm) | 100-pin PQFP (plastic quad flat pack) |
| Тип монтажа | Surface Mount | — |
| Уровень MSL | [DATA_NEEDED: level] | — |
| Lead-Free / RoHS | [DATA_NEEDED: status] | — |
| Product Type | — | Enhanced Configuration Device (boot PROM) |
| Supported FPGAs | — | Altera SRAM-based LUT FPGAs (Cyclone, Stratix, APEX, ACEX, Mercury, Excalibur) |
| Max DCLK Frequency | — | 33 MHz (Fast-mode) |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Supply Voltage (VCCIO for FPGA interface) | — | 1.8 V / 2.5 V / 3.3 V tolerant |
| Programming Interface | — | IEEE Std 1149.1 JTAG (ISP) + serial byte-blaster mode |
| In-System Programmable | — | Yes |
| Рабочая температура | — | -40 C to +85 C (industrial) |
| Operating Current (active read) | — | [DATA_NEEDED: active ICC] |
| Standby Current | — | [DATA_NEEDED: ICC standby] |
| Endurance (program/erase cycles) | — | [DATA_NEEDED: endurance cycles] |
| Статус RoHS | — | [DATA_NEEDED: RoHS status] |
| Lead-Free | — | [DATA_NEEDED: lead-free] |