IR21834STRPBF vs IR2114SSPBF Сравнение
Подробное сравнение бок о бок IR21834STRPBF от Infineon и IR2114SSPBF от Infineon. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Сравнение характеристик
| Параметр | IR21834STRPBF | IR2114SSPBF |
|---|---|---|
| Бренд | Infineon | Infineon |
| Категория | Power MOSFET Drivers | Power MOSFET Drivers |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $1,05 | $3,70 |
| Configuration | Half-Bridge | Half-bridge gate driver |
| Input Type | Inverting, Non-Inverting | — |
| Количество выходов | 2 (High Side / Low Side) | 2 (high-side + low-side) |
| Number of Drivers | 2 | — |
| Peak Source Current | 1.9 A | — |
| Peak Sink Current | 2.3 A | — |
| Supply Voltage (VCC) | 10 V to 20 V | — |
| Maximum Floating Supply Voltage | 600 V | — |
| Propagation Delay | 180 ns (typical) | — |
| Logic Input Compatibility | 3.3 V and 5 V | — |
| Undervoltage Lockout | Yes (both channels) | — |
| dV/dt Immunity | Yes | — |
| Negative Transient Tolerance | Yes | — |
| Корпус | 14-SOIC (3.90 mm width) | 24-SSOP (7.80 mm wide, 1.75 mm height) |
| Тип монтажа | Surface Mount | Surface Mount |
| Packaging | Tape & Reel | — |
| Рабочая температура | -40 C to +125 C | -40 C to +125 C |
| Статус RoHS | Compliant | Compliant |
| Топология | — | Non-inverting |
| Offset (high-side) Voltage (max) | — | 600 V |
| Gate Drive Supply (VCC) | — | 10 V to 20 V |
| Logic Supply (VDD) | — | 10 V to 20 V |
| Bootstrap Supply (VBS) | — | 10 V to 25 V (with respect to VS) |
| Source Current (typ.) | — | 2 A |
| Sink Current (typ.) | — | 3 A |
| Rise / Fall Time (typ.) | — | [DATA_NEEDED: rise/fall time] |
| Propagation Delay (typ.) | — | 50 ns |
| Input Logic Compatibility | — | 3.3 V / 5 V CMOS/LSTTL |
| UVLO Thresholds | — | VCC and VBS, internally set |
| Integrated Bootstrap Diode | — | Yes |
| Over-Current Shutdown | — | Yes (programmable, with FAULT output) |