ISL83078EIUZA vs MAX3485ESA+ Сравнение
Подробное сравнение бок о бок ISL83078EIUZA от Renesas Electronics и MAX3485ESA+ от Analog Devices. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Renesas Electronics
ISL83078EIUZA - 3.3V RS-485/422 Transceiver | Renesas | MSOP-8
ISL83078EIUZA ✓ АктивенAnalog Devices
MAX3485ESA+ - 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3485ESA+ ✓ АктивенСравнение характеристик
| Параметр | ISL83078EIUZA | MAX3485ESA+ |
|---|---|---|
| Бренд | Renesas Electronics | Analog Devices |
| Категория | Interface ICs | Interface ICs |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $0,92 | $1,45 |
| Функция | Transceiver, RS-422 / RS-485 | — |
| Number of Drivers / Receivers | 1 / 1 | — |
| Duplex | Half | — |
| Data Rate (max) | 20 Mbps (high-speed mode) | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | — |
| ESD Protection (bus pins, HBM) | ±15 kV | — |
| Receiver Fail-Safe | Full fail-safe (open / short / idle) | — |
| Slew-Rate Control | Yes (SLOPE pin) | — |
| Unit Load | 1 UL (32 nodes per bus) | — |
| Quiescent Supply Current | [DATA_NEEDED: ICC typical] | — |
| Рабочая температура | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Корпус | MSOP-8 | 8-pin SOIC |
| Тип монтажа | Surface Mount | Surface mount |
| Уровень MSL | [DATA_NEEDED: MSL rating] | — |
| Статус RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | RS-485/RS-422 transceiver |
| Напряжение питания | — | 3.3 V |
| Maximum Data Rate | — | 10 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Supported Standards | — | RS-485 and RS-422 |
| Driver Architecture | — | Slew-rate-limited true transceiver |
| Power Class | — | Low-power transceiver |
| Production Status | — | PRODUCTION |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| Ток потребления | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |