MAX3232ECWE+T vs MAX3232ECWE+ Сравнение
Подробное сравнение бок о бок MAX3232ECWE+T от Analog Devices и MAX3232ECWE+ от Maxim Integrated. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Analog Devices
MAX3232ECWE+T - 1Mbps Dual RS-232 Transceiver | Analog Devices
MAX3232ECWE+T ✓ АктивенСравнение характеристик
| Параметр | MAX3232ECWE+T | MAX3232ECWE+ |
|---|---|---|
| Бренд | Analog Devices | Maxim Integrated |
| Категория | Interface ICs | Interface ICs |
| Статус жизненного цикла | Активен | Активен |
| Product Type | Dual RS-232 transceiver | RS-232 transceiver |
| Transceiver Configuration | 2 driver and 2 receiver channels | — |
| Operating Mode | Full RS-232 | — |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Maximum Data Rate | 1 Mbps | 1 Mbps |
| ESD Protection | ±15 kV | ±15 kV |
| Shutdown Supply Current | 10 nA | — |
| Корпус | 16-pin SOIC | 16-pin SOIC |
| Тип монтажа | Surface mount | Surface mount |
| Диапазон рабочих температур | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Driver Output Voltage | [DATA_NEEDED: RS-232 driver output voltage] | [DATA_NEEDED: RS-232 driver output voltage] |
| Receiver Input Voltage Range | [DATA_NEEDED: receiver input voltage range] | — |
| Ток потребления | [DATA_NEEDED: operating supply current] | [DATA_NEEDED: operating supply current] |
| Charge-Pump Capacitor | [DATA_NEEDED: recommended charge-pump capacitor] | — |
| Статус RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Transmitter Count | — | 2 |
| Receiver Count | — | 2 |
| Configuration | — | Full-duplex |
| Low-Power Current | — | Down to 10 nA |
| External Charge-Pump Capacitors | — | 4 × 0.1 µF |
| Interface Standard | — | True RS-232 |
| Data Sheet Revision | — | Rev. 10 |
| Статус жизненного цикла | — | Production |
| Receiver Output Logic Levels | — | [DATA_NEEDED: receiver output logic levels] |