MAX3485CSA+ vs MAX3485ECSA+T Сравнение

Подробное сравнение бок о бок MAX3485CSA+ от Maxim Integrated и MAX3485ECSA+T от Analog Devices. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.

Maxim Integrated
MAX3485CSA+ MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ Unknown
Analog Devices
MAX3485ECSA+T MAX3485ECSA+T - 12Mbps 3.3V RS-485/RS-422 Transceiver | Analog Devices

MAX3485ECSA+T - 12Mbps 3.3V RS-485/RS-422 Transceiver | Analog Devices

MAX3485ECSA+T ✓ Активен

Сравнение характеристик

Параметр MAX3485CSA+ MAX3485ECSA+T
Бренд Maxim Integrated Analog Devices
Категория Interface ICs Interface ICs
Статус жизненного цикла Unknown Активен
Product Type RS-485/RS-422 transceiver RS-485/RS-422 half-duplex transceiver
Напряжение питания 3.3 V —
Скорость передачи данных 10 Mbps —
Duplex Mode Half-duplex —
Driver Count 1 driver —
Receiver Count 1 receiver —
Supported Standards RS-485 and RS-422 —
Driver Feature Slew-rate-limited driver family feature —
Short-Circuit Protection Short-circuit current limited driver —
Тепловая защита Driver enters high-impedance state during thermal shutdown —
Receiver Feature Fail-safe receiver input —
Корпус 8-SOIC, 0.154 inch, 3.90 mm width 8-pin NSOIC (SOIC-8)
Тип монтажа Surface mount Surface mount
Диапазон рабочих температур 0C to +70C [DATA_NEEDED: operating temperature range]
Channel Direction 1 transmitter and 1 receiver —
ESD Protection [DATA_NEEDED: ESD protection rating] —
Receiver Input Common-Mode Range [DATA_NEEDED: receiver input common-mode range] —
Ток потребления [DATA_NEEDED: operating and quiescent supply current] —
Logic Output Levels [DATA_NEEDED: logic output voltage levels] —
Termination Requirement [DATA_NEEDED: termination and biasing requirements] —
Supply Voltage Range — 3 V to 3.6 V
Maximum Data Rate — 12 Mbps
ESD Protection (Bus Pins) — +/-15 kV
Driver / Receiver Count — 1 driver, 1 receiver
Duplex — Half-duplex
Driver Output Type — Slew-rate-limited differential
Operating Supply Range — 3.3 V powered, single supply
Статус RoHS — RoHS3 compliant
Lead-Free Status — Lead free
Driver Protection — Short-circuit current limit and thermal shutdown
ESD Rating Reference — +/-15 kV ESD-protected bus pins
Quiescent Supply Current — [DATA_NEEDED: quiescent supply current]
Receiver Common-Mode Range — [DATA_NEEDED: receiver common-mode voltage range]
Unit Load / Max Nodes — [DATA_NEEDED: unit load and maximum node count]
Data Rate of Alternative MAX3485CSA+ — 10 Mbps

Даташиты & ресурсы

Все товары Создать BOM Запросить цену