MAX3485ESA+ vs MAX3488CSA+ Сравнение
Подробное сравнение бок о бок MAX3485ESA+ от Analog Devices и MAX3488CSA+ от Analog Devices. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Analog Devices
MAX3485ESA+ - 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3485ESA+ ✓ АктивенAnalog Devices
MAX3488CSA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3488CSA+ ✓ АктивенСравнение характеристик
| Параметр | MAX3485ESA+ | MAX3488CSA+ |
|---|---|---|
| Бренд | Analog Devices | Analog Devices |
| Категория | Interface ICs | Interface ICs |
| Статус жизненного цикла | Активен | Активен |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Напряжение питания | 3.3 V | 3.3 V |
| Maximum Data Rate | 10 Mbps | 10 Mbps |
| Driver Count | 1 | 1 |
| Receiver Count | 1 | 1 |
| Supported Standards | RS-485 and RS-422 | — |
| Driver Architecture | Slew-rate-limited true transceiver | — |
| Корпус | 8-pin SOIC | 8-pin NSOIC |
| Тип монтажа | Surface mount | Surface mount |
| Power Class | Low-power transceiver | — |
| Production Status | PRODUCTION | — |
| Рабочая температура | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Ток потребления | [DATA_NEEDED: typical and maximum supply current] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | [DATA_NEEDED: receiver input impedance] |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Статус RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Driver Edge Control | — | Slew-rate limited |
| Communication Standard | — | RS-485/RS-422 |
| Low-Power Family | — | 3.3 V, low-power transceiver |
| Cable Reflection Control | — | Slew-rate-limited driver intended to reduce reflections |
| EMI Control | — | Slew-rate-limited driver intended to reduce EMI |
| Application Topology | — | RS-422 point-to-point and RS-485 multidrop |
| Differential Signal | — | Balanced line signaling |
| Logic Interface | — | Digital logic-level driver and receiver |
| Manufacturer Product Status | — | Production |
| Manufacturer Data Sheet Revision | — | Rev. 2 |
| ESD Rating | — | [DATA_NEEDED: ESD rating] |
| Typical Quiescent Current | — | [DATA_NEEDED: quiescent current] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Isolation | — | [DATA_NEEDED: isolation rating] |