MPX53DP vs MPXV10GC7U Сравнение
Подробное сравнение бок о бок MPX53DP от NXP Semiconductors и MPXV10GC7U от NXP Semiconductors. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
NXP Semiconductors
MPX53DP - 50 kPa Uncompensated Differential Pressure Sensor | NXP
MPX53DP ⚠ Последняя закупка
Сравнение характеристик
| Параметр | MPX53DP | MPXV10GC7U |
|---|---|---|
| Бренд | NXP Semiconductors | NXP Semiconductors |
| Категория | Pressure Sensors | Pressure Sensors |
| Статус жизненного цикла | Последняя закупка | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $7,48 | $6,10 |
| Тип датчика | Piezoresistive Pressure Sensor, Uncompensated | — |
| Pressure Range | 0 kPa to 50 kPa (0 PSI to 7.25 PSI) | — |
| Pressure Type | Differential | Vented Gauge |
| Port Configuration | Dual Vertical Port (Differential) | — |
| Напряжение питания | 3 V DC (typical) | 3 V to 6 V (3 V typical excitation) |
| Тип выхода | Analog millivolt (ratiometric) | Analog Wheatstone Bridge (uncompensated mV) |
| Выходное напряжение | 0 mV to 60 mV at 3 V | — |
| Linearity | 0.4% typical | — |
| Sensitivity | [DATA_NEEDED: sensitivity in mV/kPa] | 3.5 mV/kPa nominal |
| Рабочая температура | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| Корпус | 4-SIP Module (Through-Hole, Dual Port) | 8-DIP (0.550", 13.97 mm) through-hole |
| Port Size | 0.19 inch (4.93 mm) Tube | — |
| Тип монтажа | Through-Hole | Through-Hole |
| Media Compatibility | Non-corrosive dry gases (per datasheet) | Dry non-corrosive gases (reference port vented to ambient) |
| Уровень MSL | [DATA_NEEDED: MSL level] | — |
| Статус RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| Operating Pressure Range | — | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Full-Scale Output | — | 0 mV to 35 mV at 3 V supply |
| Ток потребления | — | [DATA_NEEDED: supply current] |
| Input Impedance | — | [DATA_NEEDED: bridge input impedance] |
| Output Impedance | — | [DATA_NEEDED: bridge output impedance] |
| Port Style | — | Top port, 0.13" (3.18 mm) tube inlet |
| Compensation | — | None on chip - external calibration required |