NE5532DR2G vs NE5532D Сравнение
Подробное сравнение бок о бок NE5532DR2G от onsemi и NE5532D от Texas Instruments. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Texas Instruments
NE5532D - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5532D ✓ АктивенСравнение характеристик
| Параметр | NE5532DR2G | NE5532D |
|---|---|---|
| Бренд | onsemi | Texas Instruments |
| Категория | Amplifier ICs | Amplifier ICs |
| Статус жизненного цикла | Unknown | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $0,00 | $0,00 |
| Amplifier Type | Dual low-noise operational amplifier | Dual low-noise operational amplifier |
| Number of Channels | 2 channels | — |
| Compensation | Internally compensated | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Maximum Supply Voltage | 20 V | — |
| Корпус | 16-SOIC | 8-pin SOIC |
| Тип монтажа | Surface mount | Surface Mount |
| Channel Count | 2 | — |
| Low-Noise Classification | Low noise | — |
| Output Drive | Improved versus the 1458, as stated by the verified product description | — |
| Small-Signal Bandwidth | Considerably higher than the 1458, without a verified numerical value | — |
| Power Bandwidth | Considerably higher than the 1458, without a verified numerical value | — |
| Input Offset Voltage | [DATA_NEEDED: Input Offset Voltage] | — |
| Input Bias Current | [DATA_NEEDED: Input Bias Current] | [DATA_NEEDED: input bias current] |
| Input Noise Density | [DATA_NEEDED: Input Noise Density] | — |
| Slew Rate | [DATA_NEEDED: Slew Rate] | 10 V/μs typical |
| Output Current | [DATA_NEEDED: Output Current] | — |
| Ток покоя | [DATA_NEEDED: Quiescent Current] | — |
| Диапазон рабочих температур | [DATA_NEEDED: Operating Temperature Range] | 0 °C to +70 °C for NE5532x |
| Статус RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| Lead-Free Status | unknown | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | unknown | [DATA_NEEDED: AEC-Q100 qualification] |
| Number of Amplifier Circuits | — | 2 circuits |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| DC Voltage Gain | — | 100 V/mV typical |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Product Category | — | Standard general-purpose amplifier |
| Application Category | — | Audio applications |
| Manufacturer | — | Texas Instruments |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Ток потребления | — | [DATA_NEEDED: supply current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |