TS902ID vs NE5532DR Сравнение
Подробное сравнение бок о бок TS902ID от STMicroelectronics и NE5532DR от Texas Instruments. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
STMicroelectronics
TS902ID - Dual Rail-to-Rail Op Amp with Standby | STMicroelectronics
TS902ID ObsoleteTexas Instruments
NE5532DR - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments
NE5532DR ✓ АктивенСравнение характеристик
| Параметр | TS902ID | NE5532DR |
|---|---|---|
| Бренд | STMicroelectronics | Texas Instruments |
| Категория | Amplifier ICs | Amplifier ICs |
| Статус жизненного цикла | Obsolete | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $0,00 | $0,00 |
| Amplifier Type | Dual operational amplifier | Dual low-noise operational amplifier |
| Channel Count | 2 channels | — |
| Rail-to-Rail | Input and output | — |
| Gain-Bandwidth Product | 1.4 MHz | — |
| Input Offset Voltage | 10 mV | — |
| Supply Voltage Range | Single or dual operation from 2.5 V to 16 V | — |
| Standby Current | 0.5 uA | — |
| Standby Output State | Reduced current consumption and high-impedance outputs | — |
| Диапазон рабочих температур | -40C to +125C | 0 °C to +70 °C for NE5532x |
| Корпус | SOIC-14 (SO14), surface mount | 8-pin SOIC |
| Package Pin Count | 14 pins | — |
| Architecture | CMOS | — |
| Application Category | General-purpose instrumentation and signal conditioning | Audio applications |
| Output Impedance in Standby | High impedance | — |
| Operating Mode | Single-supply or dual-supply operation | — |
| Тип монтажа | Surface mount | Surface Mount |
| Manufacturer Product Description | Rail-to-rail CMOS dual operational amplifier with standby position | — |
| Статус жизненного цикла | Obsolete product according to manufacturer catalog | — |
| Number of Amplifier Circuits | — | 2 circuits |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| DC Voltage Gain | — | 100 V/mV typical |
| Slew Rate | — | 10 V/μs typical |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Product Category | — | Standard general-purpose amplifier |
| Manufacturer | — | Texas Instruments |
| Статус RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Ток потребления | — | [DATA_NEEDED: supply current] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |