1756-L75 - ControlLogix 5575 32MB Processor | Allen-Bradley
Артикул: 1756-L75 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $8950 | $8.950,00 |
| 10 | $8650 | $86.500,00 |
| 100 | $8250 | $825.000,00 |
| 500 | $7900 | $3.950.000,00 |
| 1.000 | $7550 | $7.550.000,00 |
1756-L75 Обзор
A ControlLogix controller is a modular PLC/PAC that combines sequential, motion, and process control in a single chassis-based platform. The 1756-L75 sits in the L7x family hierarchy between the L73 and the higher-memory L85, offering a balance of memory and cost for mid-to-large cell applications. Compared to traditional PLCs, ControlLogix integrates EtherNet/IP, ControlNet, and DeviceNet communications through dedicated sibling modules rather than on-board ports.
Key features of the 1756-L75 include 32 MB user memory, support for 4,000 to 100,000+ I/O points depending on configuration, dual-task high-speed processing, integrated motion on EtherNet/IP up to 32 axes, support for Add-On Instructions, and a 1784-SD1 Secure Digital (SD) card slot for nonvolatile program and firmware storage. The module is shipped with the SD card preinstalled, per Rockwell Automation publication 1756-TD002B-EN-E.
Architecturally, the L75 leverages a multi-core embedded controller with dedicated communication paths to the 1756 backplane. A separate comm-modules slot pair (e.g., 1756-EN2T, 1756-CN2R) provides network connectivity, and the controller coordinates process, motion, and safety instructions (when used in GuardLogix variants such as 1756-L75S) from a single project tree.
Typical applications include large process-skid control in oil-and-gas, automotive body-in-white line sequencing, water/wastewater treatment plant main controllers, high-speed packaging line PLCs, and supervisory coordination of multiple ControlLogix chassis via EtherNet/IP. The 32 MB memory headroom also makes it well-suited for projects with extensive Add-On Instruction libraries or recipe sets.
When sizing a panel, ensure the chassis backplane current budget covers the controller plus all I/O and communication modules. For redundancy, pair L75 controllers as 1756-L75 (Series B) in a redundancy configuration. SD card maintenance and firmware revision are common failure points during long deployments. This page consolidates distributor pricing, same-family drop-in alternatives, and lifecycle notes not found in a single manufacturer datasheet.
Аналоги без доработки для 1756-L75 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с 1756-L75 (тот же форм-фактор и посадочное место) — отличается по User Memory.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
1756-L75K
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
1756-L75S
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
1756-L73
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
1756-L74
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
1756-L85
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
1756-L72
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →1756-L75 Максимальные параметры и электрические характеристики
| Product Family | ControlLogix 5575 (1756-L7x series) |
| Catalog Number | 1756-L75 |
| User Memory | 32 MB |
| I/O Capacity | Up to 100,000+ I/O points (system-dependent) |
| Number of Tasks | 32 tasks (periodic and event-driven) |
| Programming Languages | Ladder Logic, Structured Text, Function Block, SFC |
| Communication Modules (paired) | 1756-EN2T, 1756-EN3TR, 1756-CN2/B/R, 1756-DNB |
| Maximum EtherNet/IP Nodes | Configurable per network; controller coordinates chassis |
| Motion Support | Up to 32 axes on EtherNet/IP (with appropriate module) |
| Storage Media | 1784-SD1 Secure Digital (SD) card (included) |
| Firmware Compatibility | ControlLogix 5570 firmware (V28.x-V30.x supported) |
| Form Factor | Single-slot ControlLogix module (1756 chassis) |
| Рабочая температура | 0 C to 60 C (chassis-dependent) |
| Тип монтажа | ControlLogix 1756 chassis backplane |
| Series | Series B (redundancy capable) |
| Compliance | UL listed, CE, RCM; refer to 1756-TD002B-EN-E for full list |
Руководство по цоколевке 1756-L75 в корпусе standard
Цоколевка для 1756-L75 (корпус standard). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для 1756-L75.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
1756-L75 подходит для 6 применениеs: Automotive Body-in-White Line Sequencing, Process Skid Control for Oil and Gas, Water and Wastewater Treatment Plant Control, High-Speed Packaging Line PLC, Supervisory Coordination of Multiple ControlLogix Chassis, Large Power-Generation Turbine and Switchgear Control.
Automotive Body-in-White Line Sequencing
The 1756-L75 fits automotive body-in-white sequencing where dozens of robots, weld controllers, and servo presses must be coordinated deterministically across a long line. Its 32 MB of user memory supports large sequential function chart (SFC) state machines, robot zone interlocks, and trace data buffers typical of body shops. Dual-task processing isolates the safety-resident logic from the line-sequel state machine so that process faults do not stall the entire line. The controller coordinates up to 32 axes on EtherNet/IP and reads/writes up to 100,000+ I/O points, matching the I/O fanout of a large body-in-white cell. Use 1756-L75S for new BIW projects requiring integrated safety.
Рекомендуется
Process Skid Control for Oil and Gas
The 1756-L75 is a strong fit for medium-to-large process skids such as gas compressor stations, separation trains, and pipeline pump skids where analog loops, valves, and discrete interlocks must be integrated under a single project tree. With 32 MB user memory, the controller can hold the full ISA-88 procedural model, Modbus/TCP, and HART variable libraries without needing ladder-logic compaction tricks. The L75's task scheduler supports 32 periodic and event tasks, allowing separate rates for analog loop update, valve sequencing, and alarm scanning. Use the same L75 pairing with a 1756-EN2T module to upstream data to plant SCADA.
Рекомендуется
Water and Wastewater Treatment Plant Control
Municipal water treatment plants (WTP) and wastewater treatment plants (WWTP) select the 1756-L75 when they need a single controller with enough memory and I/O bandwidth for the entire headworks, biological reactors, and disinfection stage. Its 32 MB project memory handles the multi-basin aeration control logic, blowers, UV intensity feedback, and SCADA polling without external HMIs. The L75 is built for redundancy where a standby 1756-L75 series B pairs with a 1756-RM2XT for high-availability supervisory sites. With 100,000+ I/O capacity, it scales across an entire plant wired through distributed 1756 chassis.
Рекомендуется
High-Speed Packaging Line PLC
High-speed packaging lines using the 1756-L75 achieve deterministic control for indexing conveyors, flying-saw cutters, and label applicators through coordinated axes on EtherNet/IP. The 32 MB memory holds extensive recipe management and lots-finished counters, which would exceed smaller controllers on multi-SKU changeovers. Up to 32 motion axes per L75 cover the full servo array of a typical form-fill-seal cell, and event-driven tasks handle high-speed reject mark inspection. Use a 1756-L75S for lines needing integrated safety on the guards and stretch wrappers.
Рекомендуется
Supervisory Coordination of Multiple ControlLogix Chassis
For multi-chassis plants, the 1756-L75 acts as a supervisory controller coordinating multiple remote 1756 racks via EtherNet/IP. The 32 MB user memory holds tag databases, produced/consumed tag structures, and global recipe synchronization logic shared across a plant floor. With dual-task scheduling, the supervisor can poll remote racks at one rate and run the SCADA gateway logic at another, keeping boundary response independent. This pattern is common in rolling-stock, building automation, and continuous-process plants where multiple chassis must share state.
Рекомендуется
Large Power-Generation Turbine and Switchgear Control
Power-generation auxiliary systems (gas turbine starts, heat recovery boiler, generator switchgear) choose the 1756-L75 for protective relay coordination, governor integration, and synchronization logic in a single PAC. The 32 MB memory handles logic for AVR/Governor control, breaker interlocks, and synchroscope sequencing, with substantial headroom for analogue PI loops on turbine temperatures. The L75 supports up to 100,000+ I/O and integrates with 1756-IF8H for HART-based vibration and temperature transmitters common in turbine packages. The product fits between the smaller L73 and the larger L85 in the family hierarchy.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для 1756-L75 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | 1756-L75K | 1756-L75S | 1756-L73 | 1756-L74 | 1756-L85 |
|---|---|---|---|---|---|---|
| Brand | Rockwell Automation | Rockwell Automation | Rockwell Automation | Rockwell Automation | Rockwell Automation | Rockwell Automation |
| Package | ControlLogix 1756 chassis module | ControlLogix 1756 chassis module - same | ControlLogix 1756 chassis module - same | ControlLogix 1756 chassis module - same | ControlLogix 1756 chassis module - same | ControlLogix 1756 chassis module - same |
| User Memory | 32 MB | 32 MB | 32 MB | 8 MB | 16 MB | 64 MB |
| Safety Integration | Standard (process control) | Standard (conformal coated) | Integrated safety task (GuardLogix 5575S) | Standard | Standard | Standard |
| Conformal Coating | No | Yes (K suffix denotes conformal coat) | No | No | No | No |
| Firmware Family | ControlLogix 5570 (V28-V30) | ControlLogix 5570 (V28-V30) | ControlLogix 5570S (V28-V30) | ControlLogix 5570 (V28-V30) | ControlLogix 5570 (V28-V30) | ControlLogix 5570 (V28-V30) |
| Chassis Compatibility | 1756-A4/A7/A10/A13/A17 (standard and LXT) | 1756 standard and LXT - same | 1756 standard and LXT - same | 1756 standard and LXT - same | 1756 standard and LXT - same | 1756 standard and LXT - same |
| Programming Environment | Studio 5000 Logix Designer | Studio 5000 Logix Designer | Studio 5000 Logix Designer (Safety) | Studio 5000 Logix Designer | Studio 5000 Logix Designer | Studio 5000 Logix Designer |
| Redundancy Capable | Yes (Series B with 1756-RM/RM2XT) | Yes (Series B) | Yes (Series B) | Yes (Series B) | Yes (Series B) | Yes (Series B) |
Ключевые отличия
- 32 MB memory headroom for large projects (против 1756-L73)
- Lower cost than the 1756-L85 for mid-tier memory projects (против 1756-L85)
- Standard process vs safety integrated version (против 1756-L75S)
Заметки по проектированию
Always pair the correct firmware revision with the controller hardware revision. Mixing older V28 firmware with newer Series B hardware triggers controller fault 0x05. After SD-card replacement, verify the program loads from nonvolatile storage before resuming production. Per Rockwell publication 1756-TD001, the SD card is keyed - do not substitute a third-party SD card that lacks the vendor ID.
Estimate panel thermal load before commissioning. A fully populated 1756-A10 chassis with an L75 plus I/O modules draws ~25-35 W. Confirm enclosure ventilation and ambient temperature stay within the 0-60 C operating range. For XT applications, use the 1756-A4LXT/A7LXT chassis to extend to -25 to +70 C derating per Rockwell's TD001 derating guidelines.
Reserve a dedicated communication-module slot pair for EtherNet/IP and ControlNet modules. Place the 1756-L75 in slot 0 of the chassis to keep backplane wiring clean and the redundant pair adjacent. Provide strain relief for the 1756 chassis mounting and 1784-SD1 SD card replacement access. Always back up the project to the SD card before any firmware update to allow rollback.
The 1756 chassis backplane supplies all module power directly; verify chassis power supply (1756-PA72/PB72) sizing for total module count. An L75 with a typical 1756-EN2T and 1756-CN2R draw from a single shared backplane. For redundant supervisory plants, a 1756-PSCA2 chassis adapter is required between the primary and secondary controllers.
Информация о соответствии
Industrial PLC modules; CE/UL/RCM marks per 1756-TD002B-EN-E. RoHS/REACH substance declaration available per request from Rockwell Automation. AEC-Q100 not applicable (industrial control module, not automotive-qualified semiconductor).
