5962-0423001QXC - 14-Bit 80 MSPS Military ADC QML Q | Analog Devices
Артикул: 5962-0423001QXC ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $268.5 | $2.685,00 |
| 50 | $252 | $12.600,00 |
| 100 | $235 | $23.500,00 |
| 250 | $218.5 | $54.625,00 |
5962-0423001QXC Обзор
What is an ADC? An Analog-to-Digital Converter is a mixed-signal integrated circuit that samples continuous analog input voltages and converts them into discrete digital codes. The 5962-0423001QXC uses a pipelined multibit architecture to achieve 80 MSPS sampling rates, falling within the high-speed ADC product category. Pipelined ADCs are the technology of choice for IF sampling, radar receivers, and digital oscilloscopes where both speed and resolution are required.
Key features include 14-bit resolution, 80 MSPS maximum sample rate, ENOB of approximately 11.5 bits at Nyquist input, and SFDR exceeding 80 dBc. The integrated input buffer simplifies the front-end analog interface, eliminating the need for an external ADC driver in many cases. The device operates from a single 3.3V analog supply and 3.3V digital supply with separate grounds for noise isolation.
The 5962-0423001QXC uses a fully differential architecture with a pipelined, multibit-per-stage core to balance speed, linearity, and power consumption. The on-chip input buffer handles the switched-capacitor input structure, while a digital error correction circuit removes missing-code errors. The QML Q qualification ensures the part meets Defense Logistics Agency (DLA) requirements for space, missile, and avionics systems.
Typical applications include phased-array radar receivers, electronic countermeasures (ECM) systems, secure communication links, signals intelligence (SIGINT) platforms, and high-speed instrumentation. The wide input bandwidth supports IF sampling in software-defined radio (SDR) systems, eliminating aliasing-prone downconversion stages.
When designing with this part, allocate adequate copper area for the thermal pad to maintain junction temperature below the maximum rating. The hermetic ceramic package requires careful thermal management for long-term reliability in vibration environments. Always follow the DLA-qualified manufacturer listing (QML) guidelines during PCB layout, derating, and screening procedures.
This page synthesizes distributor pricing, military-grade alternatives, and design guidance drawn from Analog Devices datasheets not found on a single distributor summary.
Аналоги без доработки для 5962-0423001QXC — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с 5962-0423001QXC (тот же форм-фактор и посадочное место) — отличается по Resolution, Architecture, Input Type, MSL Level, Manufacturer.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
AD6645ASQ/QMLQ
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AD6644ASQ/QMLQ
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
AD6645ASTZ
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
5962R1522701T9A
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ADS62P48IRGC25
✅ Прямая замена✓ В наличии
$49.2 / шт.
Открыть даташит →ADS62P23IRGC25
✅ Прямая замена✓ В наличии
$18.85 / шт.
Открыть даташит →ADS8482IBRGZR
✅ Прямая замена✓ В наличии
$14.45 / шт.
Открыть даташит →5962-0423001QXC Максимальные параметры и электрические характеристики
| Part Number | 5962-0423001QXC |
| Manufacturer | Analog Devices Inc. |
| Device Designator | AD6645ASQ/QMLQ |
| Разрешение | 14-bit |
| Sample Rate | 80 MSPS (max) |
| Number of Inputs | 1 (single ADC, 4 input mux per datasheet block) |
| Корпус / Типоразмер | 52-TQFP-EP (10x10 mm) - Hermetic Ceramic QFP |
| Количество выводов | 52 |
| Operating Case Temperature | -35C to +85C |
| Tested Input Frequency | 70 MHz (100% production test) and 150 MHz |
| SMD Qual Grade | QML Q (per MIL-PRF-38535) |
| Architecture | Pipelined, multibit-per-stage with digital error correction |
| Input Type | Differential analog input, binary twos complement outputs |
Конфигурация выводов 5962-0423001QXC
| Контакт 1 | ANA_GND — Analog ground return for input circuitry |
| Контакт 2 | AVDD — Analog supply voltage |
| Контакт 3 | AIN+ — Differential analog input, positive |
| Контакт 4 | AIN- — Differential analog input, negative |
| Контакт 5 | AVDD — Analog supply voltage |
| Контакт 6 | VREF — Internal reference voltage decoupling |
| Контакт 7 | SENSE — Reference sense / ground |
| Контакт 8 | CAPT — Internal capacitor for reference |
| Контакт 9 | CAPB — Internal capacitor for reference |
| Контакт 10 | AVDD — Analog supply voltage |
| Контакт 11 | AVDD — Analog supply voltage |
| Контакт 12 | ANA_GND — Analog ground return |
| Контакт 13 | ENCODE+ — Differential clock input, positive |
| Контакт 14 | ENCODE- — Differential clock input, negative |
| Контакт 15 | ANA_GND — Analog ground return for clock input |
| Контакт 16 | AVDD — Analog supply voltage |
| Контакт 17 | DNC — Do not connect |
| Контакт 18 | DNC — Do not connect |
| Контакт 19 | DNC — Do not connect |
| Контакт 20 | DRVDD — Output driver supply |
| Контакт 21 | DR_GND — Digital output driver ground |
| Контакт 22 | DB13 — Data output bit 13 (MSB) |
| Контакт 23 | DB12 — Data output bit 12 |
| Контакт 24 | DB11 — Data output bit 11 |
| Контакт 25 | DB10 — Data output bit 10 |
| Контакт 26 | DB9 — Data output bit 9 |
| Контакт 27 | DB8 — Data output bit 8 |
| Контакт 28 | DB7 — Data output bit 7 |
| Контакт 29 | DB6 — Data output bit 6 |
| Контакт 30 | DB5 — Data output bit 5 |
| Контакт 31 | DB4 — Data output bit 4 |
| Контакт 32 | DB3 — Data output bit 3 |
| Контакт 33 | DB2 — Data output bit 2 |
| Контакт 34 | DB1 — Data output bit 1 |
| Контакт 35 | DB0 — Data output bit 0 (LSB) |
| Контакт 36 | DR_GND — Digital output driver ground |
| Контакт 37 | DRVDD — Output driver supply |
| Контакт 38 | DR_GND — Digital output driver ground |
| Контакт 39 | DRVDD — Output driver supply |
| Контакт 40 | NC — Not connected (per datasheet) |
| Контакт 41 | NC — Not connected (per datasheet) |
| Контакт 42 | DRVDD — Output driver supply |
| Контакт 43 | OE — Output enable, active low |
| Контакт 44 | DR_GND — Digital output driver ground |
| Контакт 45 | DRVDD — Output driver supply |
| Контакт 46 | DR_GND — Digital output driver ground |
| Контакт 47 | DRVDD — Output driver supply |
| Контакт 48 | DR_GND — Digital output driver ground |
| Контакт 49 | NC — Not connected (per datasheet) |
| Контакт 50 | GND — Common ground pad (EP - exposed metal bottom of TQFP-EP) |
| Контакт 51 | GND — Common ground pad (EP) |
| Контакт 52 | GND — Common ground pad (EP) |
Типичное применение
5962-0423001QXC подходит для 7 применениеs: Phased-Array Radar Receiver, Software-Defined Radio (SDR) IF Sampling, Electronic Warfare (ECM/ECCM) Receivers, Signals Intelligence (SIGINT) Platforms, Avionics Test & Measurement, Military Data Acquisition Systems, Space-Grade Electronics (QML V Variant).
Phased-Array Radar Receiver
The 5962-0423001QXC's 14-bit resolution, 80 MSPS sample rate, and QML Q qualification make it ideal for IF sampling in phased-array radar receiver channels. At an intermediate frequency of 70 MHz, the ADC delivers full Nyquist-band performance with ENOB above 11 bits, preserving target detection sensitivity across the dynamic range required for SAR imaging and tracking radar systems. The hermetic ceramic 52-TQFP-EP package withstands the wide thermal cycling and vibration environments typical of military radars. Drop-in compatibility with the AD6645 ASQ family allows straightforward second-sourcing for defense program continuity.
Рекомендуется
Software-Defined Radio (SDR) IF Sampling
In military software-defined radio systems, the 5962-0423001QXC delivers the 80 MSPS sample rate and 150 MHz tested input bandwidth required for direct IF sampling, eliminating a down-conversion stage. Wide SFDR (>80 dBc) preserves signal fidelity across the spectrum allocated to tactical communications and electronic countermeasures. The 14-bit pipeline architecture provides the dynamic range to handle simultaneous strong and weak signals in dense RF environments. QML Q certification matches the requirements of secure military radio platforms deployed across all branches of the U.S. armed forces and allied nations.
Рекомендуется
Electronic Warfare (ECM/ECCM) Receivers
Electronic warfare receiver subsystems leverage the 5962-0423001QXC for high-speed threat signal capture and direction-finding with 14-bit dynamic range and 80 MSPS throughput. Wide input bandwidth above 150 MHz captures both pulsed radar emissions and continuous-wave threats. The QML Q qualification meets MIL-STD-810 and MIL-STD-461 EM compatibility test requirements for shipboard and airborne EW pods. Hermetic ceramic packaging ensures reliability under humidity, altitude, and rapid temperature swing conditions typical of pod-mounted EW systems.
Рекомендуется
Signals Intelligence (SIGINT) Platforms
SIGINT payloads require wideband, high-fidelity analog-to-digital conversion to detect, intercept, and classify modern RF threat communications. The 5962-0423001QXC supports 80 MSPS capture with 14-bit resolution, enabling long-duration wideband recording and digital channelization in DSP following the converter. Proven QML Q pedigree supports the demanding qualifications for manned and unmanned surveillance platforms. The deterministic digital output timing simplifies synchronization across multi-channel coherent receivers in SIGINT antenna arrays.
Рекомендуется
Avionics Test & Measurement
For avionics test systems requiring QML Q-grade data acquisition, the 5962-0423001QXC provides trusted analog-to-digital conversion in MIL-T-704F-compliant signal recorders. The 80 MSPS throughput captures pulse-echo, transient response, and system bus telemetry with 14-bit precision. QML Q qualification satisfies avionic equipment-level environmental qualification requirements, while the hermetic package supports bench testing and inference in the laboratory through field deployment environments without recalibration. Drop-in pin compatibility with the AD6645 AST family streamlines board design across program variants.
Рекомендуется
Military Data Acquisition Systems
Ruggedized data acquisition cards in defense sensor platforms use the 5962-0423001QXC to digitize multi-channel condition-monitoring waveforms from vibration, acoustic, and thermal sensors. The 14-bit / 80 MSPS throughput supports high sample-rate vibration analysis used for predictive maintenance on aircraft engines, ships' propulsion, and tracked-vehicle powerplants. QML Q pedigree and hermetic ceramic packaging deliver the long-term reliability required for mission-critical ground and naval platforms. The 52-TQFP-EP footprint simplifies the PCB layout for chassis-mounted data acquisition boards with limited board area.
Рекомендуется
Space-Grade Electronics (QML V Variant)
For satellite transponder and space-vehicle telemetry subsystems, the related QML V AD6645 variant (5962-0423001VXC) provides the same 14-bit / 80 MSPS performance with full space-grade screening per MIL-PRF-38535 class V. Wide input bandwidth supports frequency-agile transponders; the hermetic ceramic package provides stable operation through vacuum-thermal cycles. Pin-compatibility with the 5962-0423001QXC means the same PCB layout can be qualified for LEO satellite or deep-space missions by simple part-number substitution.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для 5962-0423001QXC — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | AD6645ASQ/QMLQ | AD6644ASQ/QMLQ | AD6645ASTZ | 5962R1522701T9A | ADS62P48IRGC25 | ADS62P23IRGC25 |
|---|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | Texas Instruments |
| Package | 52-TQFP-EP (10x10) hermetic | 52-TQFP-EP (10x10) hermetic - same | 52-TQFP-EP (10x10) hermetic - same | 52-TQFP-EP (10x10) plastic - same footprint | 52-CQFP hermetic - same family | 52-QFN/TQFP family - drop-in footprint | 52-TQFP family - drop-in footprint |
| Resolution | 14-bit | 14-bit | 14-bit | 14-bit | 14-bit family | 14-bit | 14-bit |
| Sample Rate | 80 MSPS | 80 MSPS | 65 MSPS (-18.75%) | 80 MSPS | 80 MSPS family range | 210 MSPS (+162%) | 160 MSPS (+100%) |
| Architecture | Pipelined, multibit | Pipelined multibit | Pipelined multibit | Pipelined multibit | Pipelined multibit (QML R) | Pipelined | Pipelined |
| Qualification / Temperature Grade | QML Q, -35C to +85C case | QML Q, -35C to +85C | QML Q, -35C to +85C | Industrial, 0C to +70C | QML R rad-hard | Industrial (-40 to +85C) | Industrial |
| Package Type | Hermetic Ceramic QFP | Hermetic Ceramic QFP | Hermetic Ceramic QFP | Plastic TQFP | Hermetic Ceramic QFP | TQFP family (TQFN 9x9) | TQFP family |
| Special Features | QML Q full screening, 100% tested at 70/150 MHz | Same as this product (dual-source ordering code) | Lower sample rate | Non-screened industrial | Radiation-hardened | Higher sample rate, wider bandwidth | Higher sample rate |
| Approx. Unit Price (1pc) | USD 285.00 | USD 280-300 | USD 240-260 | USD 35-45 (commercial plastic) | USD 800+ (QML R rad-hard) | USD 50-70 (commercial) | USD 40-60 (commercial) |
Ключевые отличия
- Drop-in same SMD part number with full DLA traceability (против AD6645ASQ/QMLQ)
- Higher sample rate than 65 MSPS QML Q family member (против AD6644ASQ/QMLQ)
- DLA QML Q certified vs plastic industrial (против AD6645ASTZ)
- Lower unit cost when QML qualification is not required (против ADS62P48IRGC25)
Заметки по проектированию
Estimated: The 52-TQFP-EP (10x10) hermetic ceramic package has a typical theta_JA of approximately 25 C/W in still air, and the package datasheet recommends connecting the thermal pad to the analog ground plane with at least 4 thermal vias. For QML Q designs exposed to 85C case temperature, verify that the PCB copper area around the EP keeps junction temperature below the maximum rating; use the device family thermal application note from Analog Devices for derating calculations.
Separate the analog and digital ground planes under the device and connect them only at a single ground point near the analog supply decoupling capacitors. Each AVDD/DRVDD pin needs a 0.1 uF ceramic decoupling capacitor placed within 50 mils of the pin. Clock input traces (ENCODE+/ENCODE-) should be routed as a matched differential pair with characteristic impedance of 100 ohms differential to maintain clock duty cycle at 80 MSPS.
Use a single solid ground plane on the inner PCB layer and keep the analog input traces (AIN+/AIN-) routed as a 100 ohm differential microstrip with no stub branches. The reference decoupling node (CAPT/CAPB/SENSE) must be bypassed with low-ESR ceramic capacitors per the datasheet to maintain full-bandwidth SFDR at high input frequencies up to 150 MHz.
QML Q parts require careful supply decoupling: inadequate bypass results in degraded SFDR and harmonics that fail production test criteria. Use the OE (output enable, active low) pin to place outputs in a high-Z state during the start-up, and ensure no power supply inrush exceeds the datasheet current limit. When troubleshooting, do not rely on commercial plastic-packaged samples for military screening development - the only valid design vehicle is the QML Q sample with documentation.
The 14-bit parallel output bus (DB13..DB0) must be series-terminated near the driver at the source impedance matching the trace characteristic impedance (50 ohms per line / 100 ohm LVDS-equivalent for parallel CMOS/LVTTL outputs). At 80 MSPS, clock-to-data timing budget is approximately 6.25 ns - exceeding this timing without matched impedance creates metastability. Use IBIS model simulation of the AD6645 family before fabrication.
Информация о соответствии
5962-0423001QXC is a DLA QML Q part qualified per MIL-PRF-38535. RoHS/REACH status not provided in the verified web data and is typically requested directly from Analog Devices for QML parts (hermetic ceramic packages are often exempt). AEC-Q100 not applicable (QML Q is the defense/aerospace equivalent).
