A3P250-2PQ208 - 250K Gate 310MHz FPGA | Microchip
Артикул: A3P250-2PQ208 ✓ АктивенA3P250-2PQ208 Обзор
A field-programmable gate array, or FPGA, is a programmable semiconductor in the logic IC and semiconductor hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA implements digital logic through a configurable logic and interconnect fabric. The A3P250 sits within the ProASIC3 family of reprogrammable logic devices, combining logic density with in-system reconfiguration for prototypes, production control systems, communications equipment, and industrial automation.
The headline resources are 250K programmable gates, a 310 MHz maximum frequency, a 1.5 V core voltage, and 151 available I/O in a 208-pin package. The -2 designation identifies the device speed grade within the A3P250 ordering scheme. These characteristics make the part relevant to designs containing parallel data paths, state machines, protocol interfaces, control logic, and modest DSP pipelines where a 310 MHz device operating from a 1.5 V core provides an appropriate balance of speed, density, and integration.
The ProASIC3 architecture uses configurable logic elements and programmable routing to implement system functions in parallel rather than executing them sequentially. This parallel architecture is useful for deterministic control and data-processing tasks. At 310 MHz, clocked logic can process high-speed state transitions and multi-bit datapaths, while the 151 I/O provide interfaces to external memory, converters, transceivers, control signals, and industrial peripherals. The 130 nm fabrication technology identifies the device as a mature programmable-logic platform rather than a leading-edge high-density FPGA.
Typical uses include industrial factory automation, industrial motor and process control, communications protocol conversion, embedded instrumentation, and compact control modules. It can also serve as a prototyping platform for larger programmable-logic designs because its configuration approach allows the same board architecture to be reused when the programmed function changes. For designs requiring substantially more logic, memory resources, or higher I/O density, the A3P250 may be replaced by a larger device with a revised PCB footprint and power architecture.
The principal design consideration is package migration. A3P250 pin compatibility with lower-density devices depends on the specific package, as documented in Microchip's ProASIC3 migration guidance. Designers should preserve power, ground, configuration, clock, and I/O assignments, then validate timing, I/O standards, pin constraints, and configuration behavior before changing the device. A 310 MHz design also requires disciplined clock distribution, decoupling, and signal-integrity practices.
This product overview combines the device's gate density, frequency, voltage, package, and migration considerations with practical guidance for FPGA evaluation. It also distinguishes verified same-package family options from broader functional alternatives, helping engineers assess replacement risk before committing to a PCB or production configuration.
Аналоги без доработки для A3P250-2PQ208 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с A3P250-2PQ208 (тот же форм-фактор и посадочное место) — отличается по Core Supply Voltage, Family, Mounting Type, Package.
A3P250-PQG208
✅ Прямая заменаУточнить цену
Открыть даташит →A3P250-PQG208I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
A3P250-PQ208
✅ Прямая заменаУточнить цену
Открыть даташит →A3P250-2PQ208 Максимальные параметры и электрические характеристики
| FPGA Family | ProASIC3 |
| Programmable Logic Gates | 250,000 gates |
| Maximum Operating Frequency | 310 MHz |
| Process Technology | 130 nm |
| Core Supply Voltage | 1.5 V |
| Number of I/O | 151 I/O |
| Total Pin Count | 208 pins |
| Package Type | 208-pin PQFP |
| Device Type | Field-programmable gate array (FPGA) |
| Speed Grade | -2 |
Руководство по цоколевке A3P250-2PQ208 в корпусе 208-pin pqfp
Цоколевка для A3P250-2PQ208 (корпус 208-pin pqfp). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для A3P250-2PQ208.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
A3P250-2PQ208 подходит для 6 применениеs: Industrial Automation Controller, Communications Protocol Interface, Data Acquisition and Instrumentation, Motor and Motion Control, Programmable Test Equipment, Embedded Communication Gateway.
Industrial Automation Controller
The A3P250-2PQ208 fits industrial automation control because its 250,000 programmable gates can implement multiple parallel control paths, while its 310 MHz maximum frequency supports time-sensitive state-machine logic. The 151 I/O provide connections to sensors, actuators, isolation interfaces, counters, and communication transceivers. A typical implementation divides the fabric among control sequencing, fault handling, data acquisition, and industrial protocol management. The 1.5 V core rail should be generated through a clean, decoupled supply, and the 208-pin PQFP footprint requires careful clock, ground, and signal-integrity design.
Рекомендуется
Communications Protocol Interface
The A3P250-2PQ208 is useful for protocol conversion, packet processing, and parallel interface control where parallel hardware execution is valuable. Its 250K-gate fabric can host transmit and receive state machines, buffering logic, framing, error checking, and clock-domain adaptation. Up to 151 I/O permit direct connection with transceivers, parallel buses, and memory devices. The 310 MHz maximum operating frequency provides margin for pipelined datapaths, but actual interface throughput depends on I/O standards, routing congestion, and timing closure. Configuration must preserve clock assignments and transceiver control sequencing.
Рекомендуется
Data Acquisition and Instrumentation
The A3P250-2PQ208 can implement acquisition sequencing, digital filtering, calibration control, and data packing around high-speed converters. Its parallel programmable logic permits simultaneous sampling control, timestamp handling, and buffer management, while the 310 MHz speed grade supports pipelined processing. The 151 I/O offer connections for converter interfaces, trigger lines, reference control, and communication logic. Design the clock tree and analog-supply separation carefully so switching from digital logic does not degrade measurement accuracy. Verify acquisition timing and I/O voltage compatibility in the manufacturer documentation before layout release.
Рекомендуется
Motor and Motion Control
The A3P250-2PQ208 is appropriate for deterministic motor-control sequencing, encoder decoding, fault handling, and supervisory logic in industrial equipment. The 250,000 gates allow parallel encoder channels, interpolation functions, and protection state machines to coexist, while the 310 MHz maximum frequency supports tightly timed digital logic. Its 151 I/O can connect position sensors, gate drivers, current sensing interfaces, and safety monitoring signals. Timing margins must be evaluated against the selected power stage and motor-control loop. Critical outputs should include appropriate fault handling and deterministic reset behavior rather than relying only on general-purpose logic.
Рекомендуется
Programmable Test Equipment
The A3P250-2PQ208 supports programmable test and measurement logic because reprogrammability allows the same instrument architecture to implement multiple stimulus, capture, and sequencing functions. Its 250K gates can host timing generators, pattern engines, analysis pipelines, and instrument-control interfaces, while 151 I/O provide broad connectivity to test boards. The 310 MHz maximum frequency supports high-speed digital state transitions, although analog bandwidth and inter-channel timing remain system-dependent. Keep sensitive analog sections isolated from digital return currents and validate every I/O standard against the connected fixture.
Рекомендуется
Embedded Communication Gateway
The A3P250-2PQ208 can act as the programmable hub in a communication gateway that bridges serial, parallel, and memory interfaces. Its 250,000 gates support buffering, routing, protocol translation, and supervisory logic, while the 151 I/O simplify connections to multiple physical layers. At a 310 MHz maximum operating frequency, pipelined packet handling is possible when timing closure and memory bandwidth permit. A practical design should partition clock domains, buffer external buses, and provide deterministic reset for each attached transceiver. Validate latency, packet-loss behavior, and thermal performance after programming the final routing.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для A3P250-2PQ208 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | A3P250-PQG208 | A3P250-PQG208I | A3P250-PQ208 |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP |
| FPGA Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 |
| Number of I/O | 151 I/O | 151 I/O | 151 I/O | 151 I/O |
| Temperature Designation | Commercial temperature suffix -2 | Commercial temperature designation | Industrial temperature designation | Commercial temperature designation |
| Pin Compatibility | 208-pin PQFP reference design | Same-package family candidate; verify exact suffix and pinout | Same-package family candidate; verify exact suffix and pinout | Same-package family candidate; verify exact suffix and pinout |
Ключевые отличия
- Explicit -2 speed-grade ordering (против A3P250-PQG208)
- Industrial-temperature migration option (против A3P250-PQG208)
- Established ProASIC3 resource profile (против Larger cross-brand FPGA options)
- Parallel programmable logic for deterministic control (против Sequential microcontroller-based implementation)
Заметки по проектированию
Do not treat every A3P250 ordering code as interchangeable merely because it uses a 208-pin package. The A3P250-2PQ208 includes an explicit -2 speed designation, while A3P250-PQG208 and A3P250-PQG208I use a different suffix structure. Confirm the complete ordering table, temperature grade, speed grade, pinout, configuration method, and exposed power requirements before replacing the device.
The device operates from a 1.5 V core supply. Place the core and I/O bypass capacitors close to their associated supply pins, provide a low-impedance ground reference, and keep switching-current paths out of sensitive signal returns. Verify every I/O supply rail and the allowable sequencing relationship between core and I/O supplies in the manufacturer electrical documentation before finalizing the power tree.
Route clocks as controlled, impedance-matched networks and avoid unnecessary stubs or test pads that can degrade edge quality. Maintain continuous ground-plane coverage beneath the PQFP footprint, place decoupling before the associated device pins, and route high-speed interfaces away from sensitive analog inputs. Because the package has 208 pins, a stable component placement and pin-aware floorplan are important for both signal integrity and manufacturing.
For PCB migration within the ProASIC3 family, retain the original power and ground assignments unless the manufacturer migration guidance explicitly permits a change. Check logic utilization and timing after recompilation because an apparently pin-compatible device can still fail timing at a different speed grade. Validate configuration startup, JTAG or programming access, and functional behavior on the production target board before committing to a replacement.
The 310 MHz value represents the device's maximum operating frequency, not guaranteed system performance. Actual timing depends on the selected speed grade, logic mapping, routing, I/O standards, clock quality, and supply integrity. Review post-fit timing results under the lowest intended supply voltage and highest intended operating temperature, and include critical paths in the sign-off checklist rather than relying on the headline frequency alone.
Информация о соответствии
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code.