A54SX08-2FG144 - 8K-Gate SX FPGA 320MHz 144-FBGA | Microchip
Артикул: A54SX08-2FG144 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
A54SX08-2FG144 Обзор
A Field Programmable Gate Array (FPGA) is a semiconductor device containing a matrix of configurable logic blocks and programmable interconnects that the designer wires together to implement custom digital hardware. Within the programmable logic hierarchy, the FPGA sits above CPLDs and SPLDs, and the antifuse-based SX-A subfamily belongs to the one-time-programmable (OTP) class of FPGAs, which retain their configuration permanently and need no configuration ROM or boot sequence.
Key differentiating features include the sea-of-modules architecture, which achieves pin-to-pin propagation delays as low as 0.4 ns on FastConnect paths; dual 3.3V/5.0V supply operation supporting mixed-voltage system designs; and nonvolatile antifuse programming, which eliminates configuration time, reduces bill-of-materials cost, and provides inherent resistance to configuration corruption and radiation-induced configuration upsets compared with SRAM FPGAs.
Technically, the device is fabricated in a 0.35 um CMOS process and uses DirectConnect, FastConnect, segmented routing, and high-drive routing resources to balance speed and routability. The '-2' speed grade offers the family's fastest timings, and the trade-off for this performance is OTP flexibility: logic changes require a new device rather than a reflash, so designs must be fully verified before production.
Typical applications include high-performance glue logic consolidation, bus interfacing and bridge functions, industrial control state machines, communications line cards, and military/aerospace subsystems where antifuse immutability is an advantage.
Designers should budget I/O assignment carefully, since OTP devices cannot be reprogrammed; use the Libero SoC design flow from Microchip for synthesis, place-and-route, and timing sign-off at the -2 speed grade.
This page synthesizes distributor availability data, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, with verified data as of 2026-09-03.
Аналоги без доработки для A54SX08-2FG144 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с A54SX08-2FG144 (тот же форм-фактор и посадочное место) — отличается по Package, Family, Supply Voltage, Operating Temperature, Configuration.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
A54SX08-2FG144I
✅ Прямая замена✓ В наличии
$30.5 / шт.
Открыть даташит →A54SX08-2FGG144
✅ Прямая замена✓ В наличии
$38.5 / шт.
Открыть даташит →A54SX08-2FGG144I
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →A54SX08-FG144
✅ Прямая замена✓ В наличии
$109.78 / шт.
Открыть даташит →A54SX08-FG144I
✅ Прямая замена✓ В наличии
$109.79 / шт.
Открыть даташит →A54SX08-PFGG144
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
A54SX08-2FG144 Максимальные параметры и электрические характеристики
| Family | Actel SX-A (SX) |
| Equivalent System Gates | 8000 |
| System Gates (max) | 12000 |
| Configurable Logic Blocks (CLBs) | 768 |
| Logic Cells | 512 |
| User I/O | 111 |
| Maximum Frequency | 320 MHz |
| Minimum Pin-to-Pin Propagation Delay | 0.4 ns (FastConnect) |
| Process Technology | 0.35 um CMOS |
| Напряжение питания | 3.3 V / 5 V |
| Programming Technology | Antifuse (one-time programmable) |
| Speed Grade | -2 |
| Корпус | 144-ball FBGA, 12 x 12 mm, 1.00 mm pitch |
| Тип монтажа | Surface Mount |
Руководство по цоколевке A54SX08-2FG144 в корпусе 144-ball fbga, 12 x 12 mm, 1.00 mm pitch
Цоколевка для A54SX08-2FG144 (корпус 144-ball fbga, 12 x 12 mm, 1.00 mm pitch). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для A54SX08-2FG144.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
A54SX08-2FG144 подходит для 6 применениеs: Glue Logic Consolidation, Industrial Control and Automation, Communications Line Cards, Aerospace and Defense Legacy Subsystems, Test and Measurement Instrumentation, Medical Device Interface Electronics.
Glue Logic Consolidation
The A54SX08-2FG144 replaces dozens of 74-series SSI/MSI devices in board-level interconnect, decoding, and bus-matching roles. Its 8,000 equivalent gates and 768 CLBs absorb address decoders, bus transceivers, and state elements into one 12 x 12 mm FBGA, cutting BOM count and assembly cost, while the 0.4 ns FastConnect pin-to-pin delay preserves the timing margins that discrete TTL paths previously provided. Because the antifuse fabric is nonvolatile and instant-on, the consolidated logic works from the first clock cycle with no configuration loader, matching the behavior of the discrete parts it replaces. At 3.3V or 5V I/O operation, it interfaces directly with legacy 5V buses, a capability modern SRAM FPGAs often lack.
Рекомендуется
Industrial Control and Automation
In PLC I/O modules, motor-control sequencing, and machine-state supervision, the A54SX08-2FG144 implements deterministic control state machines at up to 320 MHz internal toggle rates, far beyond MCU software loops. The antifuse configuration cannot be corrupted by brownouts or EMI events on the factory floor - a frequent failure mode for SRAM FPGAs that lose or corrupt configuration data. With 111 user I/Os in a 1.00 mm-pitch 144-FBGA, designers can terminate encoders, limit switches, and fieldbus transceivers directly. For harsh-temperature cabinets, the A54SX08-2FG144I industrial-grade variant is a pin-identical substitution; both parts are designed with the Libero flow and verified via timing simulation before OTP programming.
Рекомендуется
Communications Line Cards
Telecom and datacom line cards of the SX-A era used SX FPGAs for framing, multiplexing, and backplane interface logic. The A54SX08-2FG144's 0.4 ns FastConnect paths and segmented/high-drive routing support the tight skew and setup budgets of backplane interfaces, while the 3.3V/5V dual supply bridges mixed-voltage backplanes. Its instant-on behavior means links retrain as soon as power is applied, without a configuration download window that could trigger watchdog faults in central-office equipment. The 111 user I/Os accommodate T1/E1 framers, SerDes glue, and LED/relay drive logic on one die. For designs needing more capacity in the same footprint strategy, the A54SX16 series offers a path within the same architecture and toolchain.
Рекомендуется
Aerospace and Defense Legacy Subsystems
Antifuse FPGAs hold a privileged position in defense electronics because their configuration is physically blown, immune to single-event configuration upsets and impossible to dump or corrupt in the field. The A54SX08-2FG144 has served in radar interface boards, avionics glue logic, and secure controller paths where predictable, immutable behavior is mandated. Its 320 MHz -2 speed grade covers counter, encoder, and interface timing needs, and the absence of a configuration PROM removes an entire failure class and supply-chain dependency. Note that this commercial part is not radiation-characterized; new rad-tolerant designs should use the Microchip RTAX family (e.g., RTAX2000S), while this device suits ground, sheltered, and legacy-refresh programs.
Рекомендуется
Test and Measurement Instrumentation
Bench instruments and ATE fixtures use the A54SX08-2FG144 for timing generators, counter chains, and trigger logic. The deterministic pin-to-pin delays of the SX architecture (0.4 ns FastConnect, well-characterized -2 speed-grade timing models) let instrument designers close picosecond-class skew budgets that software-configured SRAM fabrics with variable routing delay complicate. Because antifuse parts are programmed once and never reloaded, measurement repeatability is identical across every unit shipped - an auditable advantage for calibration procedures. The 3.3V/5V I/O flexibility interfaces directly with legacy TTL-level instrumentation buses, and the 144-FBGA footprint keeps signal escape simple on 4-layer test boards.
Рекомендуется
Medical Device Interface Electronics
Diagnostic and monitoring equipment benefits from the A54SX08-2FG144's fixed, verified logic: once the design is signed off and programmed, its behavior is locked for the device's service life, simplifying regulatory validation of digital interface blocks for sensors, front-end ADCs, and user-interface buttons. Instant-on antifuse configuration ensures the instrument is operational the moment power is applied - relevant for patient-connected equipment with strict power-up behavior requirements. The 111 user I/Os in a compact 12 x 12 mm FBGA support dense multi-channel front ends, and low configuration-related failure modes support long service intervals. Designers should select the industrial-temperature A54SX08-2FG144I variant for equipment requiring wider environmental qualification.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для A54SX08-2FG144 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | A54SX08-2FG144I | A54SX08-2FGG144 | A54SX08-FG144 | A54SX08-PFGG144 |
|---|---|---|---|---|---|
| Package | 144-FBGA (12 x 12 mm) | 144-FBGA - same | 144-FBGA - same | 144-FBGA - same | 144-PBGA - same terminal count |
| Brand | Microchip Technology (Actel) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Equivalent Gates | 8000 | 8000 | 8000 | 8000 | 8000 |
| CLBs / Cells | 768 / 512 | 768 / 512 | 768 / 512 | 768 / 512 | 768 / 512 |
| User I/O | 111 | 111 | 111 | 111 | 113 in / 113 out (per Microchip USA) |
| Supply Voltage | 3.3 V / 5 V | 3.3 V / 5 V | 3.3 V / 5 V | 3.3 V / 5 V | 3.3 V / 5 V |
| Temperature Grade | Commercial | Industrial | Commercial | Commercial | Commercial |
| Programming Technology | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) |
Ключевые отличия
- Fastest speed grade in the 8K-gate SX-A line (против A54SX08-PFGG144)
- Industrial-temperature drop-in available (против A54SX08-2FG144I)
- Antifuse immutability and instant-on (против SRAM FPGAs of similar capacity)
- Dual 3.3V/5V I/O operation (против A54SX08-FG144 (-1 grade))
Заметки по проектированию
The A54SX08-2FG144 is one-time programmable. Unlike SRAM FPGAs, there is no rework after programming: a design change means scrapping the device. Complete timing closure, functional simulation, and boundary-scan verification in Libero before releasing devices to the programming house. Keep at least one spare programmed device per board revision, and lock the RTL/design archive since recompilation for a new build must reproduce identical timing at the -2 speed grade.
The 144-ball FBGA uses a 1.00 mm pitch on a 12 x 12 mm body. Fan out with via-in-pad or dog-bone escape on 0.8 mm BGA rules; a 4-layer stack with dedicated ground plane is recommended for the 3.3V/5V dual-supply design. Verify the footprint against the FG144 ballout column of the 54SX family datasheet - pin assignments differ across the family's QFP and BGA options, and a footprint copied from a TQ144 QFP layout will not fit.
Decouple both VCC rails (3.3V core/I-O and 5V I-O where used) with at least 0.1 uF ceramic per supply pin pair plus 10 uF bulk near the device. Because FastConnect paths switch with 0.4 ns edges, simultaneous switching noise on 111 I/Os can be significant; assign ground balls generously in the I/O planner and avoid returning high-drive outputs through a shared narrow ground path.
When migrating between same-family 144-FBGA variants (-2 vs -1 speed grades, commercial vs industrial suffixes), the ballout is unchanged, so layout reuse is straightforward - but re-run timing at the substituted speed grade. The -1 speed grade parts are roughly 25% slower (240 MHz class vs 320 MHz), which can break paths that closed with margin only at -2.
Информация о соответствии
Compliance status not stated in the retrieved distributor data for this legacy Actel/Microchip SX-A part. Verify RoHS/REACH status on the official Microchip product page before procurement.
