Analog Devices

AD524ADZ - 1 MHz Instrumentation Amplifier | Analog Devices

Артикул: AD524ADZ ✓ Активен
16-lead ceramic DIP (16-CDIP) Package
MOQ: 1 |

AD524ADZ Обзор

The Analog Devices AD524ADZ is a precision monolithic instrumentation amplifier intended for high-accuracy data acquisition systems, with a listed gain-bandwidth product of 1 MHz and a 16-lead ceramic DIP package. It is designed to amplify low-level differential signals while maintaining low offset voltage, low offset-voltage drift, low noise, high linearity, and high common-mode rejection. The ceramic DIP package is approximately 0.300 inch, or 7.62 mm, wide and is intended for applications that benefit from stable operation over extended temperature conditions.

An instrumentation amplifier is a differential analog signal-conditioning IC used to amplify the voltage difference between two inputs while rejecting signals common to both inputs. Its internal gain-setting arrangement and common-mode rejection make it useful when the sensor output is small, the signal source has substantial output impedance, or the measurement must reject ground potential differences. In the broader electronics hierarchy, the AD524ADZ belongs to the precision analog amplifier family and supports the wider power-management and signal-conditioning chain used by sensors, data converters, and industrial measurement equipment.

The AD524 family combines guaranteed low offset voltage, low offset-voltage drift, and low noise for precision high-gain applications. Analog Devices specifically identifies high linearity and high common-mode rejection as important characteristics for data acquisition systems. These properties help reduce measurement error at the front end, where amplifier offset, noise, and common-mode leakage become amplified along with the intended sensor signal. The AD524 is offered in multiple package and temperature-grade configurations, allowing original-equipment designers to select a package consistent with soldering, environmental, and manufacturing requirements.

The AD524ADZ is a single-circuit instrumentation amplifier with external gain configuration. Its 1 MHz listed gain-bandwidth product provides useful bandwidth for low-frequency industrial signals, process-control loops, and precision measurement channels. The monolithic implementation avoids the component matching and temperature-tracking problems associated with discrete resistor networks. Its precision-oriented architecture is particularly valuable when offset drift and common-mode rejection contribute directly to total measurement uncertainty over time or across different operating conditions.

Typical uses include bridge-sensor signal conditioning, thermocouple and strain-gauge measurement, biomedical instrumentation, industrial process monitoring, and laboratory data acquisition. In a bridge circuit, the amplifier converts a small differential excitation-induced voltage into a level suitable for an ADC. In a process-control system, its common-mode rejection can suppress much of the unwanted voltage shared by sensor and return lines, while low offset and low noise help preserve resolution at the measurement input.

Layout and grounding remain critical because a precision instrumentation amplifier cannot recover common-mode or noise errors introduced by the PCB. Place the amplifier close to the source, route differential inputs as a compact pair, maintain symmetry between input and feedback components, and use a clean ground reference. Select the gain resistor and decoupling capacitors using the manufacturer’s recommended values, and verify the complete analog front end for offset, noise, settling behavior, and common-mode range.

This product overview combines the exact package and construction information for the AD524ADZ with practical guidance for instrumentation-amplifier selection, PCB implementation, and replacement planning. It also identifies same-footprint family options for design review while clearly separating confirmed package compatibility from unverified cross-manufacturer alternatives.

Аналоги без доработки для AD524ADZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

AD524AD

✅ Прямая замена
Analog Devices
📦 16-CDIP
Precision monolithic instrumentation amplifier · 1 circuit · 250 µV · 5 V/µs · 1 MHz · ±6 V to ±18 V · 16-lead ceramic DIP · 16 leads

Уточнить цену

Открыть даташит →

AD524AZ

✅ Прямая замена ⚠️ Характеристики не проверены
📦 16-CDIP
Same AD524 family and 16-lead ceramic-DIP format; accuracy or temperature-rating differences are orderable-variant dependent

📋 Справочный аналог (нет в каталоге)

AD524JZ

✅ Прямая замена ⚠️ Характеристики не проверены
📦 16-CDIP
Same AD524 family ceramic-DIP construction; package has 16 pins with 0 footprint-pin additions, but grade limits differ

📋 Справочный аналог (нет в каталоге)

AD524JRZ

✅ Прямая замена ⚠️ Характеристики не проверены
📦 16-CDIP
Same AD524 family 16-lead ceramic-DIP format; J-grade accuracy and environmental limits require ordering-table verification

📋 Справочный аналог (нет в каталоге)

AD524ADZ Максимальные параметры и электрические характеристики

Product Type Precision monolithic instrumentation amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 1 MHz
Package Type 16-lead ceramic DIP (16-CDIP)
Package Width 0.300 inch (7.62 mm)
Тип монтажа Through-hole
Differential Input Supported precision differential amplification
Статус RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

Руководство по цоколевке AD524ADZ в корпусе 0.300 inch (7.62 mm)

Цоколевка для AD524ADZ (корпус 0.300 inch (7.62 mm)). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 0.300 inch (7.62 mm) для AD524ADZ

Нет подробных данных о распиновке для AD524ADZ.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

AD524ADZ подходит для 6 применениеs: Strain-Gauge Bridge Measurement, Thermocouple Data Acquisition, Industrial Process Measurement, Biomedical Instrumentation, Laboratory Instrumentation, Precision ADC Signal Conditioning.

🏭

Strain-Gauge Bridge Measurement

The AD524ADZ is appropriate for a strain-gauge or resistive-bridge front end that produces a small differential voltage under excitation. Its precision instrumentation-amplifier architecture is intended to combine low offset voltage, low offset drift, low noise, high linearity, and high common-mode rejection, all of which influence the integrity of the bridge output. With a listed gain-bandwidth product of 1 MHz, it can condition low-frequency structural and force measurements before digitization. Install it close to the bridge, preserve differential routing symmetry, use the specified gain-setting components, and verify that excitation-related common-mode voltage remains within the amplifier’s operating range.

📡

Thermocouple Data Acquisition

The AD524ADZ can condition the low-level differential output of a thermocouple in a precision data-acquisition channel. Thermocouples generate millivolt-class signals, making low offset, low offset-voltage drift, and low noise especially important because these errors can obscure the measurement or create calibration shifts over time. High common-mode rejection helps separate the intended sensor differential from voltage common to the input pair. The 1 MHz listed gain-bandwidth product supports low-frequency thermal measurements rather than high-speed thermocouple transients. Use cold-junction compensation, isolated input protection, clean connectors, and a low-noise reference or ADC interface.

🏭

Industrial Process Measurement

The AD524ADZ fits industrial process-measurement inputs where a sensor produces a small differential signal riding on a larger common-mode voltage. Its high common-mode rejection can suppress shared interference, while the precision-oriented offset and noise characteristics help retain measurement resolution. The single-circuit monolithic implementation also reduces the mismatch problems that can arise in discrete differential amplifier networks. The 1 MHz listed gain-bandwidth product is sufficient for many temperature, pressure, level, and flow loops. Field wiring should still use filtering, surge protection, grounding, and isolation appropriate to the process environment.

💊

Biomedical Instrumentation

The AD524ADZ is suitable for low-level biomedical instrumentation when the front end requires a precision differential amplifier and a legacy through-hole ceramic package. Low offset, low drift, and low noise help preserve the resolution of small physiological or biochemical sensor signals, while high common-mode rejection can reduce interference common to the sensing electrodes and analog front end. The 1 MHz listed gain-bandwidth product is well matched to low-frequency physiological measurements. Patient-connected systems also require isolation, protection, leakage-current compliance, and verification against the applicable medical safety requirements.

🔧

Laboratory Instrumentation

The AD524ADZ can serve as the precision input stage in laboratory measurement equipment that combines a low-level sensor with a controlled analog gain path. Its guaranteed low offset voltage, low offset-voltage drift, and low noise support repeatable laboratory readings, while high linearity and common-mode rejection reduce errors in the acquired waveform. The 1 MHz listed gain-bandwidth product makes the device useful for general-purpose low-frequency instrumentation rather than only static measurements. A practical implementation should minimize input-node leakage, use stable precision gain components, provide clean bypassing, and evaluate gain error and channel drift during calibration.

📺

Precision ADC Signal Conditioning

The AD524ADZ can amplify and condition a differential sensor output before it reaches a precision analog-to-digital converter. Its low offset and low noise reduce errors that would otherwise consume part of the converter’s input range or resolution, and its high common-mode rejection improves signal integrity when the source develops a substantial common-mode voltage. The 1 MHz listed gain-bandwidth product gives designers useful bandwidth for many low-frequency acquisition channels. Select the closed-loop gain and external resistor carefully, confirm the output-swing limits for the chosen supply, and place the amplifier close to the converter’s analog input.

Сводка рекомендуемых товаров

AD524AD Same-family precision instrumentation amplifier for bridge signal conditioning Используется в: Strain-Gauge Bridge Measurement, Thermocouple Data Acquisition, Industrial Process Measurement, Biomedical Instrumentation, Laboratory Instrumentation, Precision ADC Signal Conditioning AD524AZ AD524-family ceramic-DIP ordering variant Используется в: Strain-Gauge Bridge Measurement, Biomedical Instrumentation AD524JZ AD524-family ceramic-DIP precision amplifier variant Используется в: Thermocouple Data Acquisition, Laboratory Instrumentation AD524JRZ AD524-family precision amplifier ordering variant Используется в: Industrial Process Measurement, Precision ADC Signal Conditioning
What is the AD524ADZ and what is its primary application?
The AD524ADZ is a single-circuit, precision monolithic instrumentation amplifier for low-level differential-signal measurement. Analog Devices describes it as a precision monolithic instrumentation amplifier designed for data acquisition applications requiring high accuracy under worst-case operating conditions. Its key characteristics include guaranteed low offset voltage, low offset-voltage drift, low noise, high linearity, and high common-mode rejection. The component is supplied in a 16-lead ceramic DIP package and is particularly relevant to bridge sensors, industrial measurement, laboratory instrumentation, and other analog front ends where offset, drift, noise, and common-mode errors affect accuracy.
What is the gain-bandwidth product of the AD524ADZ?
The AD524ADZ has a listed gain-bandwidth product of 1 MHz. This bandwidth characteristic allows the precision instrumentation amplifier to process low-frequency sensor signals while retaining useful response for measurement systems that are not limited to static DC inputs. The 1 MHz figure should be treated as the key listed bandwidth metric, while the usable signal bandwidth in a finished circuit also depends on the selected closed-loop gain, external gain-setting resistor, output-load conditions, and the characteristics of the subsequent conversion stage.
What package does the AD524ADZ use?
The AD524ADZ uses a 16-lead ceramic DIP, also identified as 16-CDIP, with a listed body width of 0.300 inch, or 7.62 mm. The Analog Devices AD524 family is also offered in 16-lead SBDIP, 16-lead wide SOIC, and 20-terminal leadless chip-carrier configurations, but those are distinct package options rather than drop-in package matches for the AD524ADZ. A replacement must preserve the 16-CDIP footprint, pin arrangement, row spacing, and electrical functions before it can be treated as a true board-level drop-in replacement.
Where can I download the AD524ADZ datasheet PDF?
The official AD524ADZ documentation is available from the Analog Devices AD524 product page at https://www.analog.com/en/products/ad524.html. The product page identifies the AD524 family, available packages, and precision-amplifier characteristics, while the associated manufacturer datasheet contains the complete electrical characteristics, pin descriptions, application information, and ordering information. Third-party HTML datasheet mirrors can assist with viewing historical documents, but engineers making production decisions should use the Analog Devices page and manufacturer PDF as the controlling technical references for the AD524ADZ.
Where can I find the AD524ADZ pinout?
The authoritative AD524ADZ pin assignments are shown in the pin-configuration section of the Analog Devices manufacturer datasheet linked from the AD524 product page. The AD524ADZ is a 16-lead ceramic DIP, so the package drawing should list pins 1 through 16 in the standard counter-clockwise DIP numbering order. Use that table when assigning supply, ground, differential inputs, feedback, reference, and output connections. The search results establish the 16-CDIP construction but do not reproduce the exact pin names, so a separate AD524ADZ pin list would not be authoritative.
Is the AD524ADZ suitable for precision sensor measurement?
Yes, the AD524ADZ is specifically suited to precision differential sensor measurement. Analog Devices highlights guaranteed low offset voltage, low offset-voltage drift, low noise, high linearity, and high common-mode rejection as the principal benefits for data acquisition. These characteristics are particularly valuable for strain gauges, resistive bridges, thermocouples, and other sensors that generate small differential signals. The front-end design must still provide adequate input, output, and common-mode headroom for the selected supply voltage and gain, and it must maintain clean grounding and symmetric signal routing.
AD524ADZ vs AD624 — which is better for a legacy 16-pin design?
The AD524ADZ is the safer choice when preserving the exact AD524ADZ 16-CDIP footprint and established AD524 behavior is the priority. Analog Devices’ EngineerZone discussion identifies the AD624 as having broadly similar instrumentation-amplifier characteristics, but it also notes that the newer AD624 was not available in the same surface-mount form as the AD524. Package availability alone does not establish full pin compatibility. Engineers should compare the AD624 datasheet’s pinout, supply range, gain-setting method, common-mode range, output swing, and stability requirements before treating it as a drop-in substitution.
What is the difference between AD524AD and AD524ADZ?
Both AD524AD and AD524ADZ are identified in the product records as Analog Devices single-circuit instrumentation amplifiers in 16-CDIP packages. The distinction lies in their ordering variants and associated electrical or environmental specifications rather than a change from ceramic DIP to a surface-mount package. Because the exact AD524AD and AD524ADZ ordering-table limits were not reproduced in the product records, engineers should compare the manufacturer ordering information for accuracy grade, temperature range, and full operating limits before substitution. The shared package alone does not guarantee identical production specifications.
When should I choose the AD524ADZ over another instrumentation amplifier?
Choose the AD524ADZ when the design requires the established AD524 precision architecture and specifically needs a 16-lead ceramic DIP footprint. It is a strong fit for legacy or long-life data-acquisition equipment where the ceramic package, 1 MHz listed gain-bandwidth product, low offset, low drift, low noise, high linearity, and high common-mode rejection meet the measurement specification. Select a newer amplifier only when its complete pinout, supply requirements, gain network, common-mode range, output swing, accuracy, and lifecycle status are compatible with the existing board and system requirements.
Is the AD524ADZ suitable for industrial process-control input signals?
The AD524ADZ is suitable for many industrial process-control input signals when the measurement bandwidth and common-mode limits fit the application. Its high common-mode rejection helps isolate a small differential sensor voltage from voltage shared by the measurement pair, while low offset and low drift support stable readings over time. The AD524ADZ is presented in a 16-lead ceramic DIP package, which can suit wired industrial measurement equipment requiring a through-hole, temperature-stable package. Field wiring also needs protection, isolation, filtering, and grounding beyond the IC itself.
What is the best drop-in replacement for the AD524ADZ?
The AD524AD is the closest confirmed same-package family candidate because product records identify it as a single-circuit instrumentation amplifier in a 16-CDIP package. However, no cross-manufacturer part was confirmed as a true pin-to-pin, parameter-matched drop-in replacement. AD524-family ordering variants can differ in accuracy grade, temperature range, and operating limits, so a board-level substitution requires comparison of the manufacturer ordering tables, pin descriptions, electrical characteristics, and package drawings. The AD8475 is functionally similar in some respects, but it is not established here as an AD524ADZ drop-in replacement.
Can AD524AZ or AD524JZ replace the AD524ADZ?
The AD524AZ and AD524JZ are candidate same-family legacy alternatives, but substitution requires confirmation of their exact package and ordering characteristics against the AD524ADZ. Both names belong to the AD524 family, which Analog Devices offers in several ceramic-DIP and other package options; nevertheless, sharing a family name does not by itself prove identical pinout, temperature grade, accuracy grade, or electrical limits. Use the AD524 ordering guide and manufacturer datasheets to verify the 16-CDIP footprint, all 16 assignments, supply voltage, gain range, common-mode range, and environmental ratings before approving a replacement.
What is the best Analog Devices equivalent for the AD524ADZ?
No complete cross-brand or function-equivalent part can be recommended as a drop-in replacement from the available information. The AD524AD and several same-family ceramic-DIP ordering variants are the closest candidates for a package-based review, while the AD8475 is described by a product listing as offering similar features and performance. The AD8475 cannot be treated as drop-in without a verified pin-to-pin comparison because its package and electrical implementation may differ. The practical replacement path is to start with the Analog Devices AD524 family, then perform a complete datasheet comparison before considering any cross-manufacturer option.
How should the AD524ADZ be laid out for low-noise measurement?
Place the AD524ADZ close to the signal source and route the differential input pair together with symmetric geometry and a continuous ground reference. Keep high-current switching paths and digital return currents away from the input and gain-setting networks. Use the manufacturer’s recommended gain resistor and bypass-capacitor arrangements, maintain matched external components, and provide an appropriate low-noise reference and grounding strategy. Because the AD524ADZ is specified for low offset, low drift, and low noise, PCB leakage, thermoelectric effects, contaminated connectors, and unbalanced ground currents can otherwise dominate the achievable measurement accuracy.
Where can I buy the AD524ADZ and what is its lead time?
Use the Request a Quote form on this page to request current AD524ADZ availability, lead time, and a quantity-based quotation. The page’s structured commercial information is designed to reflect current sourcing status, while stock and delivery timing can change by quantity and supply condition. The manufacturer product page is the appropriate place to review the family’s lifecycle and package configuration, but purchasing decisions should use a current quotation rather than a historical listing snapshot. A purchase request should state the required quantity, acceptable package form, and production schedule.

Справочные инженерные данные для AD524ADZ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the AD524ADZ when an existing design requires a 16-lead ceramic DIP precision instrumentation amplifier with a listed 1 MHz gain-bandwidth product, low offset, low drift, low noise, high linearity, and high common-mode rejection. AD524AD is the closest web-confirmed same-package candidate, while AD524AZ, AD524JZ, and AD524JRZ should be considered only after their ordering-grade limits and pin assignments are verified. Choose a different instrumentation amplifier when the AD524 cannot meet supply, common-mode, output-swing, noise, bandwidth, package, or lifecycle requirements. The AD624 and AD8475 may offer broader or newer functionality, but neither may be treated as a direct board-level replacement without a complete pinout and electrical comparison. For a production redesign, evaluate modern surface-mount instrumentation amplifiers alongside the mechanical and performance trade-offs of retaining the ceramic DIP AD524ADZ.

Сравнение с аналогами

Параметр Этот товар AD524AD AD524AZ AD524JZ AD524JRZ
Package 16-CDIP 16-CDIP 16-CDIP 16-CDIP 16-CDIP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Precision monolithic instrumentation amplifier Instrumentation amplifier AD524-family instrumentation amplifier AD524-family instrumentation amplifier AD524-family instrumentation amplifier
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole

Ключевые отличия

  • Established AD524 precision architecture in a 16-lead ceramic DIP (против AD524AD)
  • Listed 1 MHz gain-bandwidth product for low-frequency precision acquisition (против AD624)
  • Single-circuit monolithic implementation reduces discrete matching concerns (против AD8475)

Заметки по проектированию

Place the AD524ADZ close to the source and preserve symmetry between the two differential inputs. Route the input pair over a continuous ground plane, avoid crossing switching-node or high-current return paths, and place the gain-setting resistor close to the amplifier where practical. Keep protection components away from high-impedance input nodes because leakage, capacitance, and temperature gradients can degrade offset and noise performance. The 16-CDIP footprint provides generous lead spacing, but careful routing remains necessary for high-impedance and precision measurement nodes.

Use the manufacturer’s specified gain-setting resistor and external-component values, and verify settling time at the selected closed-loop gain rather than relying only on the 1 MHz gain-bandwidth figure. Input capacitance, source impedance, PCB leakage, and the gain network can all alter effective bandwidth and stability. For a strain gauge, thermocouple, or other slow sensor, filter at a frequency high enough to preserve the required measurement bandwidth but low enough to reject out-of-band interference. Grounding and reference design should be evaluated with the actual sensor and cable.

Do not treat a shared AD524-family name or a common 16-CDIP outline as proof of a drop-in replacement. Confirm all 16 pin assignments, supply limits, gain range, common-mode range, output swing, offset limits, temperature grade, and stability behavior against the manufacturer ordering table. The ceramic DIP package is sensitive to assembly and environmental considerations, so follow the manufacturer’s soldering and handling guidance. For long-life equipment, verify current lifecycle status and obtain a fresh quotation rather than relying on a historical distributor listing.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The product records do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose instrumentation amplifier.

Данные проверены: 2026-11-18 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

AD524ADZ datasheet AD524ADZ pinout AD524ADZ datasheet pdf AD524ADZ 16-CDIP AD524ADZ instrumentation amplifier Analog Devices AD524ADZ AD524ADZ drop-in replacement AD524ADZ equivalent AD524ADZ vs AD524AD AD524ADZ price AD524ADZ stock AD524ADZ precision signal conditioning

Связанные компоненты & термины

Analog Devices AD524ADZ AD524AD AD524AZ AD524JZ AD524JRZ AD624 AD8475 precision monolithic instrumentation amplifier instrumentation amplifier differential amplifier analog signal conditioning data acquisition gain-bandwidth product common-mode rejection ratio CMRR input offset voltage offset voltage drift low noise 16-CDIP ceramic DIP through-hole package strain gauge thermocouple precision ADC
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ