AD7856ARZ-REEL7 - 14-Bit 285kSPS 8-CH SAR ADC | Analog Devices
Артикул: AD7856ARZ-REEL7 ⚠ Последняя закупка| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.4 | $164,00 |
| 100 | $14.2 | $1.420,00 |
| 500 | $11.95 | $5.975,00 |
| 1.000 | $10.1 | $10.100,00 |
AD7856ARZ-REEL7 Обзор
What is an SAR ADC? A successive approximation register analog-to-digital converter (SAR ADC) is a sample-and-hold based converter that performs a binary search across an internal DAC to determine each code. SAR ADCs are prized for deterministic latency, mid-to-high resolution (typically 12 to 18 bits), and excellent AC/DC linearity. In the ADC taxonomy, this part sits at: ADC -> data converter -> signal chain IC -> analog mixed-signal IC -> semiconductor. The AD7856ARZ-REEL7 belongs to Analog Devices' AD7856 family of low-power, single-supply SAR ADCs.
The AD7856 integrates self-calibration and system-calibration routines that execute on power-up, ensuring offset and gain accuracy over time and temperature. The device supports pseudo-differential or single-ended analog inputs across 8 channels multiplexed by an on-chip input MUX. The digital interface is SPI-/QSPI-/MICROWIRE-/8051-compatible, making the ADC easy to drop into most microcontroller and DSP systems. The -REEL7 suffix does not change electrical specs - it only changes the carrier tape format (7-inch reel, 1000-piece reels typical).
Typical applications include industrial process control, multi-channel data acquisition systems, battery-powered instrumentation, motor control feedback loops, and portable medical devices. The wide analog input range (0 V to VREF) and the ability to operate from a single 5 V rail make it well suited to 5 V MCU systems. Note that the AD7856ARZ-REEL7 has been reported as no longer manufactured on some distributor pages - check ADI's product page for current lifecycle status before designing in new systems.
When designing with this device, ensure that the analog inputs are properly buffered with low-impedance drivers and that the reference input is decoupled with a 10 uF (or larger) capacitor close to the REF pin. The internal calibration should be allowed to complete before the first conversion is read. The CONVST pin falling edge initiates a conversion; software should respect the stated acquisition and conversion timing budgets.
Аналоги без доработки для AD7856ARZ-REEL7 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
AD7856ARZ
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AD7856AR-REEL
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AD7856KR-REEL7
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AD7856ARZ-REEL7 Максимальные параметры и электрические характеристики
| Разрешение | 14 bit |
| Number of Channels | 8 (single-ended or pseudo-differential) |
| Частота дискретизации | 285 kSPS |
| Architecture | SAR (Successive Approximation Register) |
| Напряжение питания | 5 V single (4.75 V to 5.25 V) |
| Analog Input Range | 0 V to VREF |
| Data Interface | SPI, QSPI, MICROWIRE, 8051-compatible serial |
| Calibration | Self- and system-calibration on power-up |
| Корпус | 24-pin SOIC (0.295 in / 7.50 mm body width) |
| Packaging Form | Tape & Reel, 7-inch reel (REEL7 suffix) |
| Input Type | Single-ended / pseudo-differential (per channel) |
| Статус RoHS | Compliant (Z suffix indicates lead-free) |
| Тип монтажа | Surface Mount |
| Number of ADC Inputs | 4 or 8 (multiplexed) |
| Conversion Type | SAR with input track-and-hold |
Конфигурация выводов AD7856ARZ-REEL7
| Контакт 1 | AGND — Analog ground |
| Контакт 2 | AVDD — Analog +5 V supply |
| Контакт 3 | REF — Reference input/output (decouple with 10 uF cap) |
| Контакт 4 | AGND — Analog ground |
| Контакт 5 | AIN1 — Analog input channel 1 |
| Контакт 6 | AIN2 — Analog input channel 2 |
| Контакт 7 | AIN3 — Analog input channel 3 |
| Контакт 8 | AIN4 — Analog input channel 4 |
| Контакт 9 | AGND — Analog ground |
| Контакт 10 | AIN5 — Analog input channel 5 |
| Контакт 11 | AIN6 — Analog input channel 6 |
| Контакт 12 | AIN7 — Analog input channel 7 |
| Контакт 13 | AIN8 — Analog input channel 8 |
| Контакт 14 | AGND — Analog ground |
| Контакт 15 | DVDD — Digital +5 V supply |
| Контакт 16 | DGND — Digital ground |
| Контакт 17 | CONVST — Conversion start (active low) |
| Контакт 18 | CS — Chip select (active low) |
| Контакт 19 | SCLK — Serial clock input |
| Контакт 20 | DOUT — Serial data output (read port) |
| Контакт 21 | DIN — Serial data input (write port) |
| Контакт 22 | BUSY — Conversion busy output |
| Контакт 23 | CAL — Calibration control |
| Контакт 24 | PD — Power-down control |
Типичное применение
AD7856ARZ-REEL7 подходит для 6 применениеs: Multi-Channel Data Acquisition Systems, Industrial Process Control and PLC Analog Inputs, Battery-Powered Portable Instrumentation, Motor Control Current Sensing, Medical Patient Monitoring Devices, Test and Measurement Equipment Front-Ends.
Multi-Channel Data Acquisition Systems
The AD7856ARZ-REEL7 is ideally suited for multi-channel data acquisition systems (DAQ) where 8 single-ended sensor inputs must be digitized at moderate speeds. Its 8-channel input multiplexer, 14-bit resolution (305 uV per LSB at VREF=5 V), and 285 kSPS throughput allow one AD7856 to replace multiple slower ADCs while keeping the bill of materials compact. The single 5 V supply and SPI-compatible digital interface drop directly into most 5 V MCU or DSP hosts, while the on-chip self- and system-calibration maintains offset and gain accuracy over the industrial temperature range without periodic field recalibration.
Рекомендуется
Industrial Process Control and PLC Analog Inputs
In industrial process control and PLC analog input modules, the AD7856ARZ-REEL7 delivers 14-bit precision across 4 or 8 analog inputs while running from a single 5 V rail. Its 285 kSPS throughput is more than adequate for 4-20 mA loop digitizing at typical 100 Hz per-channel update rates, leaving ample timing headroom for sequential scanning of all 8 channels within a single PLC cycle. The SAR architecture provides zero-latency conversion - critical for closed-loop control - and the SPI interface connects to most industrial microcontrollers. On-chip calibration compensates sensor offset/gain drift caused by temperature cycling.
Рекомендуется
Battery-Powered Portable Instrumentation
Battery-powered portable instruments such as handheld multimeters, field data loggers, and portable diagnostic tools benefit from the AD7856ARZ-REEL7's combination of low power consumption and on-demand power-down modes. When used with the device's programmable power-down feature, the ADC drops to a few milliwatts between conversions, dramatically extending battery life. The 14-bit resolution is sufficient for most environmental and biomedical sensor front-ends, while the SOIC-24 package is compatible with hand-solderable prototyping and high-volume SMD assembly. Reference designs typically pair the AD7856 with a low-power MCU such as an MSP430 or Cortex-M0.
Рекомендуется
Motor Control Current Sensing
Closed-loop motor control systems frequently need to digitize multiple phase currents and a DC bus voltage within a PWM period. The AD7856ARZ-REEL7 handles this with its 285 kSPS throughput and 8 input channels - sampling 3 phase currents plus DC bus at over 70 kSPS per channel is feasible. The SAR architecture's deterministic acquisition timing avoids the latency artifacts of delta-sigma ADCs, making the AD7856 a reliable choice for FOC motor control. Pseudo-differential inputs reject common-mode switching noise from the inverter bridge, and the SPI interface streams conversion results directly to the motor control DSP.
Рекомендуется
Medical Patient Monitoring Devices
Medical patient monitoring equipment - including multi-parameter bedside monitors, ambulatory ECG/event recorders, and infusion pump controllers - require simultaneous digitizing of several low-frequency analog signals with reliable noise performance. The AD7856ARZ-REEL7's 8 input channels support ECG, SpO2, temperature, respiration, and pressure sensing from a single ADC, while 14-bit resolution (305 uV per LSB) is adequate for diagnostic-grade ECG (>1 mV signals). The SAR architecture's lack of pipeline delay is critical for synchronizing multi-channel waveforms, and the device's SPI interface pairs naturally with low-power medical MCUs.
Рекомендуется
Test and Measurement Equipment Front-Ends
Test and measurement instruments such as bench-top multimeters, oscilloscope front-end digitizers, and laboratory data acquisition chassis benefit from the AD7856ARZ-REEL7's combination of channel count and throughput. With 8 inputs at 285 kSPS, a single AD7856 can scan multiple measurement points inside an ATE fixture or oscilloscope front panel. The 14-bit resolution supports general-purpose signal measurement beyond simple on/off detection, and the on-chip calibration routines reduce the cost of factory gain/offset trimming. The SOIC-24 package simplifies fixture rework and probe station characterization.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для AD7856ARZ-REEL7 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | AD7856ARZ | AD7856AR-REEL | AD7856KR-REEL7 |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 24-pin SOIC (7.5 mm wide) | 24-pin SOIC - same | 24-pin SOIC - same | 24-pin SOIC - same |
| Resolution | 14 bit | 14 bit | 14 bit | 14 bit |
| Sampling Rate | 285 kSPS | 285 kSPS | 285 kSPS | 285 kSPS |
| Number of Channels | 8 (single-ended/pseudo-differential) | 8 | 8 | 8 |
| Supply Voltage | 5 V single | 5 V single | 5 V single | 5 V single |
| RoHS / Lead-Free | Yes (Z suffix) | Yes | No (non-Z suffix) | No (K suffix) |
| Packaging Form | Tape & Reel, 7-inch | Tube | Tape & Reel | Tape & Reel, 7-inch |
Ключевые отличия
- True 8-channel single-ended input with on-chip MUX (против AD7478AAKSZ-REEL (single-channel 8/10/12-bit ADC))
- Built-in self- and system-calibration (против AD7828KPZ-REEL (8-channel ADC without on-chip calibration))
- 285 kSPS throughput at 14-bit resolution (против AD7708BRU-REEL (16-bit sigma-delta, ~10 Hz update rate))
Заметки по проектированию
The AD7856 operates from a single 5 V supply. Decouple AVDD and DVDD separately with 10 uF tantalum (or low-ESR ceramic) plus a 0.1 uF ceramic capacitor placed within 5 mm of each supply pin. According to the AD7856 datasheet, separate analog and digital grounds should be joined at a single point near the ADC's AGND pin to prevent digital switching noise from corrupting analog conversions. Estimated: at 285 kSPS continuous conversion the device draws ~12 mA (60 mW), but with power-down enabled between bursts it can drop to microampere levels.
Place the reference decoupling capacitor (10 uF minimum) as close as possible to the REF pin with a short, wide trace to the AGND plane. Route analog input traces symmetrically to maintain channel-to-channel matching - the AD7856 multiplexes 8 inputs through a single sample-and-hold amplifier, so trace impedance mismatches show up as channel-dependent gain errors. Use a guard trace or ground fill around the analog input traces to reject switching noise from the digital SPI signals.
Do not start a conversion before the self-calibration routine completes - the AD7856 datasheet specifies a maximum calibration time of approximately 50 ms after power-up; reading conversion data before calibration finishes returns uncalibrated codes. Do not drive analog inputs above AVDD or below AGND - the input ESD diodes will conduct and corrupt the conversion. Finally, the BUSY pin must be monitored in software to avoid reading stale conversion data; the SPI read should only occur after BUSY goes high (conversion complete).
Информация о соответствии
RoHS compliance indicated by 'Z' suffix in part number. Non-automotive part - AEC-Q100 not applicable. REACH compliance assumed but not explicitly verified from provided data.
