AD8627ARZ - Precision JFET Op Amp, Single Supply | Analog Devices
Артикул: AD8627ARZ ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $4.4 | $4,40 |
| 10 | $3.96 | $39,60 |
| 100 | $3.52 | $352,00 |
| 500 | $3.17 | $1.585,00 |
| 1.000 | $2.82 | $2.820,00 |
AD8627ARZ Обзор
An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output. It is a fundamental building block in analog electronics, used in signal conditioning, filtering, and amplification. The AD8627ARZ belongs to the precision JFET input amplifier family, which offers high input impedance and low input bias current, ideal for interfacing with high-impedance sensors such as photodiodes.
Key features of the AD8627ARZ include true single-supply operation, rail-to-rail output swing, low power consumption, and high capacitive load stability. The JFET input stage provides very low input bias current, minimizing errors in high-impedance applications. The amplifier also features low offset voltage and drift, ensuring accurate signal processing over temperature.
The AD8627ARZ is designed using Analog Devices' precision bipolar and JFET process, combining the benefits of low noise and high speed with low power. The output stage is rail-to-rail, allowing maximum dynamic range in single-supply systems. The device is stable with capacitive loads exceeding 500 pF, simplifying PCB layout and reducing the need for external compensation.
Typical applications include photodiode transimpedance amplification, ATE reference level drivers, battery management, and portable instrumentation. The low supply current and wide supply range make it ideal for battery-powered devices where power efficiency is critical. The rail-to-rail output ensures full-scale signal swing, maximizing ADC input range.
When designing with the AD8627ARZ, ensure proper decoupling of the power supply pins with 0.1 µF ceramic capacitors placed close to the device. The input common-mode range extends to the negative rail, but for best performance, keep inputs within the specified common-mode voltage range. The output can drive capacitive loads up to 500 pF without oscillation, but for larger loads, add a series resistor.
Аналоги без доработки для AD8627ARZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с AD8627ARZ (тот же форм-фактор и посадочное место) — отличается по Amplifier Type, Current - Supply, Package / Case, Slew Rate.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
AD8627ARZ-REEL
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AD8627ARZ-REEL7
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MCP6H81-E/MNY
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MCP6H81T-E/MNY
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AD8627ARZ Максимальные параметры и электрические характеристики
| Amplifier Type | J-FET |
| Number of Circuits | 1 |
| Тип выхода | Rail-to-Rail |
| Current - Supply | 900 µA (max) |
| Корпус / Типоразмер | 8-SOIC |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
Конфигурация выводов AD8627ARZ
| Контакт 1 | NC — No connect |
| Контакт 2 | -IN — Inverting input |
| Контакт 3 | +IN — Non-inverting input |
| Контакт 4 | V- — Negative supply |
| Контакт 5 | NC — No connect |
| Контакт 6 | OUT — Output |
| Контакт 7 | V+ — Positive supply |
| Контакт 8 | NC — No connect |
Типичное применение
AD8627ARZ подходит для 6 применениеs: Photodiode Transimpedance Amplification, ATE Reference Level Drivers, Battery Management, Portable Instrumentation, Active Filters, Sensor Signal Conditioning.
Photodiode Transimpedance Amplification
The AD8627ARZ's JFET input provides ultra-low input bias current, essential for photodiode transimpedance amplifiers where leakage current causes offset errors. Its low supply current (900 µA) and rail-to-rail output enable battery-powered optical sensors. The amplifier's stability with capacitive loads up to 500 pF simplifies compensation, allowing direct connection to photodiodes with large parasitic capacitance. This makes it ideal for portable light meters, pulse oximeters, and industrial photodetectors.
Рекомендуется
ATE Reference Level Drivers
In automatic test equipment (ATE), the AD8627ARZ drives reference levels with high accuracy and low drift. Its rail-to-rail output ensures full-scale voltage swings, while the low offset voltage and JFET input minimize errors in precision measurements. The low supply current reduces thermal effects in dense ATE boards. The amplifier's stability with capacitive loads allows direct driving of long cables and capacitive loads without oscillation, ensuring reliable test signals.
Рекомендуется
Battery Management
The AD8627ARZ monitors battery voltage and current in battery management systems (BMS). Its low supply current (900 µA) is crucial for minimizing drain on the battery being monitored. The JFET input provides high impedance, preventing loading of the sense lines. Rail-to-rail output allows the amplifier to interface directly with ADCs in the BMS controller. The wide supply range accommodates varying battery voltages, making it suitable for portable electronics and electric vehicles.
Рекомендуется
Portable Instrumentation
In portable instruments like multimeters and data loggers, the AD8627ARZ provides precision signal conditioning with minimal power consumption. Its low supply current extends battery life, while the JFET input ensures accurate measurement of high-impedance signals. The rail-to-rail output maximizes dynamic range for ADC conversion. The small SOIC package and stability with capacitive loads make it easy to integrate into compact, battery-powered designs.
Рекомендуется
Active Filters
The AD8627ARZ is well-suited for active filter circuits in signal conditioning chains. Its low offset voltage and drift ensure accurate filter response, while the JFET input minimizes loading on preceding stages. The rail-to-rail output allows maximum signal swing, and the low supply current is beneficial in multi-stage filters. The amplifier's stability with capacitive loads simplifies filter design, as the output can directly drive the feedback network without stability issues.
Рекомендуется
Sensor Signal Conditioning
The AD8627ARZ conditions signals from various sensors, including temperature, pressure, and chemical sensors. Its JFET input provides high input impedance, preventing sensor loading. The low offset voltage and drift ensure accurate signal processing over temperature. The rail-to-rail output allows direct interface with ADCs, and the low supply current is ideal for battery-powered sensor nodes. The amplifier's stability with capacitive loads simplifies connection to sensors with long leads.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для AD8627ARZ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | AD8627ARZ-REEL | AD8627ARZ-REEL7 | MCP6H81-E/MNY |
|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Microchip Technology |
| Number of Circuits | 1 | 1 | 1 | 1 |
| Output Type | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail |
| Input Type | JFET | JFET | JFET | JFET |
| RoHS | Compliant | Compliant | Compliant | Compliant |
Ключевые отличия
- Low supply current of 900 µA (против MCP6H81-E/MNY)
- Stable with capacitive loads over 500 pF (против MCP6H81-E/MNY)
- True single-supply operation (против AD8628WARZ-RL)
Заметки по проектированию
The AD8627ARZ operates with a supply current of less than 900 µA per amplifier. For battery-powered applications, this low quiescent current is beneficial, but ensure the power supply is well-regulated and decoupled with 0.1 µF ceramic capacitors close to the V+ and V- pins to prevent instability.
For optimal performance, place the AD8627ARZ away from high-frequency digital traces and use a ground plane to minimize noise pickup. The SOIC package has exposed thermal pad? No, standard SOIC-8 does not have exposed pad, but ensure adequate copper area for heat dissipation if operating at high supply voltages.
The AD8627ARZ has no-connect pins (pins 1, 5, 8) that are not internally connected. Do not connect these pins to ground or supply, as this may cause unexpected behavior. Verify the pinout before layout to avoid shorting these pins.
Информация о соответствии
RoHS compliance indicated by distributor listings. Other compliance data not specified in provided sources.
