ADA4940-1ACPZ-RL7 - Ultralow Power Differential ADC Driver | ADI
Артикул: ADA4940-1ACPZ-RL7 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $6.33 | $6,33 |
| 10 | $5.82 | $58,20 |
| 100 | $5.12 | $512,00 |
| 500 | $4.61 | $2.305,00 |
| 1.000 | $4.1 | $4.100,00 |
ADA4940-1ACPZ-RL7 Обзор
A fully differential amplifier (FDA) is an amplifier that converts a single-ended input signal into a differential output, or amplifies a differential input while rejecting common-mode noise. It is a critical building block in precision data acquisition systems, providing the balanced drive required by high-resolution ADCs. The ADA4940-1 belongs to the family of differential amplifiers, which are a subset of operational amplifiers used specifically for driving ADCs and transmitting signals over long lines.
Key features include ultralow power consumption of 1.25 mA quiescent current, low noise and distortion, and an adjustable output common-mode voltage. The device supports a wide supply range and provides excellent AC performance, making it suitable for applications from DC to 1 MHz. The ADA4940-1 is optimized for driving the PULSAR family of ADCs from Analog Devices, ensuring seamless integration.
Technically, the ADA4940-1 employs a precision architecture that maintains low offset and high linearity. The adjustable common-mode output allows direct interface to ADC inputs, eliminating the need for external level shifting. The device also features a power-down mode to conserve energy in battery-powered systems. Its low power consumption does not compromise performance, making it a standout choice for portable instrumentation.
Typical applications include driving SAR ADCs in medical imaging, industrial process control, and portable battery-powered devices. The ADA4940-1 is also used in communication systems where signal integrity is paramount. Its low power and small footprint make it ideal for multi-channel data acquisition systems.
When designing with this device, ensure proper decoupling of the power supply pins and careful layout of the differential traces to minimize parasitic capacitance. The output common-mode voltage should be set to match the ADC's input range for optimal performance.
Аналоги без доработки для ADA4940-1ACPZ-RL7 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ADA4940-1ACPZ-RL7 (тот же форм-фактор и посадочное место) — отличается по Output Type.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ADA4940-1ACPZ-R7
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADA4940-1ACPZ-RL
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADA4940-1ACPZ
✅ Прямая замена✓ В наличии
$3.92 / шт.
Открыть даташит →ADA4945-1ACPZ-R2
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADA4940-1ACPZ-RL7 Максимальные параметры и электрические характеристики
| Amplifier Type | Differential |
| Number of Circuits | 1 |
| Тип выхода | Differential |
| Current - Supply | 1.25 mA |
| Корпус / Типоразмер | 16-LFCSP-VQ (3x3) |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
Конфигурация выводов ADA4940-1ACPZ-RL7
| Контакт 1 | OUT+ — Positive differential output |
| Контакт 2 | VOCM — Output common-mode voltage control |
| Контакт 3 | V- — Negative supply voltage |
| Контакт 4 | IN- — Inverting input |
| Контакт 5 | IN+ — Non-inverting input |
| Контакт 6 | V+ — Positive supply voltage |
| Контакт 7 | PD — Power-down control |
| Контакт 8 | OUT- — Negative differential output |
| Контакт 9 | EP — Exposed pad, connect to ground |
Типичное применение
ADA4940-1ACPZ-RL7 подходит для 6 применениеs: SAR ADC Driver, Sigma-Delta ADC Driver, Portable Medical Devices, Industrial Process Control, Communication Systems, Battery-Powered Instrumentation.
SAR ADC Driver
The ADA4940-1ACPZ-RL7 is ideal for driving SAR ADCs with resolutions up to 18 bits. Its low noise and distortion ensure accurate conversion, while its 1.25 mA quiescent current minimizes power consumption in battery-powered systems. The adjustable output common-mode voltage allows direct interface to the ADC input range, simplifying the design. With a bandwidth of DC to 1 MHz, it supports a wide range of signal frequencies. The small 3x3 mm LFCSP package saves board space in multi-channel data acquisition systems.
Рекомендуется
Sigma-Delta ADC Driver
For sigma-delta ADCs, the ADA4940-1ACPZ-RL7 provides the low noise and low distortion needed to preserve signal integrity. Its ultralow power consumption is beneficial in portable instruments where battery life is critical. The device's adjustable common-mode output ensures proper biasing of the ADC input, reducing external components. The wide bandwidth supports high-frequency signals up to 1 MHz, making it suitable for audio and vibration analysis. The compact package enables dense PCB layouts in multi-channel systems.
Рекомендуется
Portable Medical Devices
In portable medical devices like patient monitors and glucose meters, the ADA4940-1ACPZ-RL7's low power consumption extends battery life. Its low noise is critical for accurate biopotential measurements. The small package allows for miniaturization of the device. The amplifier's ability to drive high-resolution ADCs ensures precise data acquisition. The adjustable common-mode voltage simplifies interfacing with various sensor outputs.
Рекомендуется
Industrial Process Control
The ADA4940-1ACPZ-RL7 is well-suited for industrial process control systems that require high accuracy and low power. It can drive ADCs that monitor temperature, pressure, and flow with 18-bit resolution. Its low distortion ensures faithful reproduction of sensor signals. The wide supply voltage range accommodates industrial power rails. The compact package is ideal for space-constrained control modules.
Рекомендуется
Communication Systems
In communication systems, the ADA4940-1ACPZ-RL7 provides the low noise and high linearity needed for driving ADCs in receivers. Its low power consumption is beneficial in battery-operated communication devices. The differential output helps reject common-mode interference, improving signal quality. The small package allows for high-density integration in RF front-ends. The adjustable common-mode voltage facilitates interfacing with various ADC input stages.
Рекомендуется
Battery-Powered Instrumentation
The ADA4940-1ACPZ-RL7 is perfect for battery-powered instrumentation where power efficiency is paramount. Its 1.25 mA quiescent current is among the lowest in its class. It can drive high-resolution ADCs for data loggers and handheld meters. The low noise ensures accurate measurements even with small signals. The compact package is ideal for portable devices.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ADA4940-1ACPZ-RL7 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ADA4940-1ACPZ-R7 | ADA4940-1ACPZ-RL | ADA4945-1ACPZ-R2 |
|---|---|---|---|---|
| Package | 16-LFCSP-VQ (3x3) | 16-LFCSP-VQ (3x3) | 16-LFCSP-VQ (3x3) | 16-LFCSP-VQ (3x3) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Noise | Low | Low | Low | Low |
| Distortion | Low | Low | Low | Low |
| Output Common-Mode Adjustable | Yes | Yes | Yes | Yes |
Ключевые отличия
- Ultralow power consumption (против ADA4945-1ACPZ-R2)
- Pin-to-pin compatibility with ADA4945-1 (против ADA4945-1ACPZ-R2)
- Optimized for PULSAR ADCs (против Generic differential amplifiers)
Заметки по проектированию
For optimal performance, place decoupling capacitors (0.1 uF and 10 uF) close to the V+ and V- pins. Use a solid ground plane and minimize trace lengths for the differential outputs. The exposed pad (EP) should be soldered to the ground plane for thermal and electrical stability.
Keep the differential input and output traces symmetrical and closely coupled to minimize common-mode noise. Avoid routing high-speed digital signals near the amplifier. Use ground fills around the amplifier to reduce parasitic capacitance.
Do not drive a purely capacitive load directly, as it can cause ringing and instability due to bond wire inductance. Use a small series resistor (e.g., 10-50 ohms) if a capacitive load is unavoidable. Also, ensure the VOCM pin is properly driven to set the output common-mode voltage within the ADC's input range.
Информация о соответствии
RoHS compliant per distributor listings. No AEC-Q100 qualification indicated.
