ADC1413D080HN-C18 - Dual 14-Bit 80Msps JESD204A ADC | Renesas
Артикул: ADC1413D080HN-C18 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $47.5 | $47,50 |
| 10 | $42.75 | $427,50 |
| 100 | $38.2 | $3.820,00 |
| 500 | $34.95 | $17.475,00 |
| 1.000 | $32.1 | $32.100,00 |
ADC1413D080HN-C18 Обзор
Key features include 14-bit resolution per channel, 80 Msps maximum sampling rate, two simultaneously-sampling differential inputs, and a JESD204A-compliant serial output that reduces board-routing complexity compared to parallel LVDS ADCs. The pipelined architecture with on-chip error correction delivers high spurious-free dynamic range while keeping per-channel power low, making the part attractive for multi-channel signal chains where PCB area and thermal density matter.
The ADC1413D080HN belongs to the high-speed analog-to-digital converter (ADC) product family, sitting at the intersection of mixed-signal data acquisition and high-speed serial conversion. In the broader product taxonomy it is an ADC -> data converter -> mixed-signal IC -> semiconductor. The serial JESD204A interface places it in the same family as other JEDEC-standard-compliant converters used in communications infrastructure, broadband instrumentation, and software-defined radio platforms. Compared to parallel-output ADCs of equivalent speed, JESD204A ADCs dramatically reduce pin count and PCB trace congestion.
In typical multi-antenna base-station receivers, the ADC1413D080HN directly digitizes I/Q baseband or low-IF signals at 80 Msps, where its dual channels handle two antenna streams from a single 8x8 mm VFQFPN. In medical ultrasound beamformers it samples multiple receive channels before FPGA-based digital beamforming. It is also used in radar, electronic-warfare test equipment, and high-channel-count data-acquisition cards. The combination of 14 bits, 80 Msps, and JESD204A suits narrowband communications and instrumentation where dynamic range rather than raw bandwidth dominates.
When designing with the ADC1413D080HN-C18, treat the analog front end as the dominant noise contributor: a low-noise differential amplifier with sufficient bandwidth and a properly damped anti-alias filter are essential. Provide a low-jitter, low-noise clock to the CLK input to preserve SNR at 80 Msps. Bypass the analog and digital supplies separately, and stitch the exposed pad to a solid ground-copper island beneath the part for thermal dissipation.
This page synthesizes distributor pricing, drop-in alternative guidance, and practical design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для ADC1413D080HN-C18 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ADC1413D080HN-C18 (тот же форм-фактор и посадочное место) — отличается по Package, Number of Channels, Resolution, Input Type, Missing Codes.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ADC1413D065HN-C18
✅ Прямая замена✓ В наличии
$25.1 / шт.
Открыть даташит →ADC1413D105HN-C18
✅ Прямая замена✓ В наличии
$26.1 / шт.
Открыть даташит →ADC1413D125HN-C18
✅ Прямая замена✓ В наличии
$25.4 / шт.
Открыть даташит →ADC1413D065HN-C1
✅ Прямая замена✓ В наличии
$19.95 / шт.
Открыть даташит →ADC1213D080HN-C18
✅ Прямая замена✓ В наличии
$21.75 / шт.
Открыть даташит →ADC1112D125HN-C18
✅ Прямая замена✓ В наличии
$9.48 / шт.
Открыть даташит →ADC1413D080HN-C18 Максимальные параметры и электрические характеристики
| Number of Bits | 14 |
| Number of Inputs | 2 (differential) |
| Sampling Rate (Max) | 80 Msps |
| Architecture | Pipelined |
| Data Interface | Serial JESD204A |
| Input Type | Differential |
| Корпус | 56-VFQFPN (8x8 mm) with exposed pad |
| Число выводов | 56 |
| Каналы | 2 simultaneous-sampling channels |
| Missing Codes | Guaranteed zero (with output error correction) |
| Power Consumption | Low (per Renesas product family claim) |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
Руководство по цоколевке ADC1413D080HN-C18 в корпусе 56-vfqfpn (8x8 mm) with exposed pad
Цоколевка для ADC1413D080HN-C18 (корпус 56-vfqfpn (8x8 mm) with exposed pad). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для ADC1413D080HN-C18.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ADC1413D080HN-C18 подходит для 6 применениеs: Multi-Antenna Communications Receiver, Medical Ultrasound Beamforming, Software-Defined Radio (SDR) Platform, Industrial Test & Measurement Instrumentation, Radar and Electronic-Warfare Receiver Front End, Multi-Channel Data Acquisition Card.
Multi-Antenna Communications Receiver
Direct digitizes two receive streams from a multi-antenna base-station or software-defined-radio frontend. The ADC1413D080HN-C18 delivers 14-bit resolution at 80 Msps per channel with a JESD204A serial output, halving pin count compared to parallel LVDS converters. The pipelined core with output error correction guarantees no missing codes across all channels - critical for synchronized beamforming and MIMO demodulation. Both ADC channels share the same sampling clock, preserving channel-to-channel phase coherence within sub-sample timing uncertainty. Power per channel is held low by the part's high-efficiency architecture, easing thermal budgets in compact 8x8 mm VFQFNP layouts. Designers pair the ADC with a low-jitter clock synthesizer and a JESD204A-capable FPGA fabric to complete the receive chain.
Рекомендуется
Medical Ultrasound Beamforming
Provides simultaneously-sampled 14-bit digitization for each receive channel in multi-element ultrasound probes. The ADC1413D080HN-C18's dual channels match typical 2-channel-per-probe-element clustering, and the JESD204A link delivers data cleanly to the FPGA-based digital beamformer without the routing congestion of parallel LVDS. Zero missing codes over the operating range guarantee no dropped samples in clinical imaging, where artifact-free data is essential for diagnosis. Low per-channel power keeps thermal load manageable across 64- and 128-element arrays. The 56-VFQFPN (8x8 mm) footprint allows dense PCB layouts required by compact probe-head assemblies, and the exposed pad supports the thermal dissipation profile of long acquisition sessions.
Рекомендуется
Software-Defined Radio (SDR) Platform
Samples wideband I/Q baseband or low-IF signals at 80 Msps for software-defined-radio platforms. The ADC1413D080HN-C18's JESD204A serial output reduces FPGA pin consumption and PCB trace count, simplifying high-channel-count SDR designs where many ADCs stream to a single FPGA. 14-bit resolution and the pipelined architecture with error correction provide the dynamic range required for simultaneous weak-signal capture and strong-signal handling. Two independent differential channels let one ADC cover I and Q streams of a single channelizer, halving PCB area versus two single-channel parts. The exposed thermal pad of the 56-VFQFPN supports the dense board layouts typical of radio modules, while Renesas' high-efficiency design keeps system power budgets realistic.
Рекомендуется
Industrial Test & Measurement Instrumentation
Provides dual-channel 14-bit digitization for automated test equipment, spectrum analyzers, and signal analyzers. The ADC1413D080HN-C18's 80 Msps sampling handles transient capture and FFT analysis of signals up to ~30 MHz analog bandwidth without compromising time resolution. The pipelined core with output error correction maintains measurement-grade accuracy across all acquisition sweeps, giving instrument vendors confidence in their published specifications. Two independent differential channels reduce part count in dual-trace or differential-input instruments. JESD204A serialization reduces PCB layer count and connector pin requirements in modular instruments, and the 8x8 mm VFQFPN allows dense channel layouts inside compact benchtop and rack-mount form factors.
Рекомендуется
Radar and Electronic-Warfare Receiver Front End
Captures high-dynamic-range IF samples in radar warning receivers and electronic-support measures (ESM) systems. The ADC1413D080HN-C18's dual 14-bit channels at 80 Msps deliver the SNR and spurious-free dynamic range required for sensitive intercept receivers while consuming minimal board space. JESD204A serial output simplifies data transport to FPGA-based digital signal processors that run pulse de-interleaving and emitter classification algorithms. Zero missing codes and high SFDR preserve signal fidelity across long coherent-integration windows. The 56-VFQFPN (8x8 mm) package with exposed thermal pad allows mechanical integration into the compact chassis of airborne and ground-mobile EW platforms without exceeding thermal envelopes.
Рекомендуется
Multi-Channel Data Acquisition Card
Digitizes many simultaneous sensor channels on PCI Express or PXI Express data-acquisition cards where board area is at a premium. The ADC1413D080HN-C18's two channels and JESD204A output double channel density per FPGA serial-link lane compared to single-channel parallel ADCs, cutting the FPGA and PCB cost per channel. 14-bit resolution and the pipelined core provide the accuracy required by vibration analysis, acoustic monitoring, and precision instrumentation. The exposed thermal pad of the 56-VFQFPN package supports the high-channel-count thermal budget of densely-populated acquisition cards. Designers leverage the part's guaranteed zero missing codes and Renesas' high-efficiency analog front end to deliver high-channel-count cards without thermal throttling.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ADC1413D080HN-C18 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ADC1413D065HN-C18 | ADC1413D105HN-C18 | ADC1413D125HN-C18 | ADC1213D080HN-C18 | ADC1112D125HN-C18 |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 56-VFQFPN (8x8 mm) | 56-VFQFPN (8x8 mm) - same | 56-VFQFPN (8x8 mm) - same | 56-VFQFPN (8x8 mm) - same | 56-VFQFPN (8x8 mm) - same | 56-VFQFPN (8x8 mm) - same |
| Resolution | 14-bit | 14-bit | 14-bit | 14-bit | 12/14-bit | 11/12-bit |
| Max Sample Rate | 80 Msps | 65 Msps | 105 Msps | 125 Msps | 80 Msps | 125 Msps |
| Channels | 2 | 2 | 2 | 2 | 2 | 2 |
| Interface | JESD204A (serial) | JESD204A (serial) | JESD204A (serial) | JESD204A (serial) | JESD204A (serial) | JESD204A (serial) |
| Architecture | Pipelined | Pipelined | Pipelined | Pipelined | Pipelined | Pipelined |
| Missing Codes | Zero (guaranteed) | Zero (guaranteed) | Zero (guaranteed) | Zero (guaranteed) | Zero (guaranteed) | Zero (guaranteed) |
Ключевые отличия
- Dual 14-bit channels at 80 Msps in single 8x8 mm package (против ADC1213S080HN-C18)
- JESD204A serialization reduces FPGA pin count and PCB trace congestion (против Legacy parallel-output 14-bit 80 Msps ADCs)
- Zero missing codes guaranteed across the operating range (против Generic 14-bit 80 Msps ADCs without output error correction)
Заметки по проектированию
Estimated: at 80 Msps with a 14-bit JESD204A output, the ADC1413D080HN-C18 generates a high-speed serialized bitstream with edge rates well into the GHz range. Place the analog input traces as short length-matched differential pairs, keep the clock traces matched within 5 mils, and stitch the exposed thermal pad to a contiguous ground copper island with multiple stitching vias. Keep analog and digital supply return paths physically separate under the part to prevent digital switching currents from corrupting the analog input network.
Decouple the analog and digital supplies independently. Place a 10 uF + 0.1 uF + 100 nF bypass network as close as possible to each ADC supply pin, with the smallest capacitor nearest the pin. Use a low-jitter, low-phase-noise clock synthesizer (such as the LMX2594 or LMK048xx family) to drive the CLK+/- pins and verify the differential clock traces are impedance-matched to 100 ohms. Estimated: clock-aperture-jitter contribution to SNR at 80 Msps with 14-bit ENOB targets sub-200 fs RMS.
Do not omit the anti-alias filter on the analog inputs - placing the ADC behind an active differential amplifier with a properly damped RC low-pass filter is essential to prevent out-of-band aliasing products. Verify JESD204A link parameters (L, M, F, K, S) match the FPGA JESD204A IP core configuration before bringing the link up; mismatched link parameters are the most common cause of JESD204A sync failures. Confirm the SYSREF and SYNC timing constraints from the datasheet are met by the FPGA design, and ensure the layout does not route noisy digital signals across the analog input trace region.
Информация о соответствии
RoHS compliant per DigiKey and Mouser distributor listings. AEC-Q100 not applicable - this is a commercial/industrial-grade high-speed converter; contact Renesas for automotive-grade alternatives if required.
