ADC912BW/883 - 12-Bit CMOS ADC | Analog Devices | Military
Артикул: ADC912BW/883 ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $45 | $45,00 |
| 10 | $40 | $400,00 |
| 100 | $35 | $3.500,00 |
| 500 | $30 | $15.000,00 |
| 1.000 | $25 | $25.000,00 |
ADC912BW/883 Обзор
An ADC (analog-to-digital converter) is an electronic component that converts continuous analog signals into discrete digital numbers, enabling digital systems to process real-world signals. The ADC912BW/883 is a successive-approximation ADC, which uses a binary search algorithm to determine the digital output, offering a good balance of speed and resolution. It is part of the broader family of data converters, which are essential in signal processing chains from sensors to microcontrollers and digital signal processors.
Key features of the ADC912BW/883 include 12-bit resolution, a conversion time of 13.5 microseconds, and a maximum operating temperature of 125°C. The device uses CMOS technology, which provides low power consumption and high noise immunity. It offers binary and offset binary output formats, and the three-state bus interface allows direct connection to microprocessor data buses. The military temperature grade ensures reliable operation in extreme environments.
Technically, the ADC912BW/883 integrates a precision D/A converter and a high-speed comparator, achieving high accuracy through laser-trimmed thin-film resistors. The successive-approximation register (SAR) logic controls the conversion sequence, and the three-state outputs facilitate easy interfacing with 8-bit or 16-bit microprocessors. The device requires a +5V supply and provides a typical integral linearity error of 0.0122%, ensuring accurate conversion.
Typical applications include military avionics, radar systems, industrial process control, and high-reliability data acquisition systems. Its wide temperature range and through-hole package make it ideal for legacy systems and retrofits where reliability is paramount. The ADC912BW/883 is also suitable for test and measurement equipment requiring high precision and stability.
When designing with this ADC, ensure proper decoupling of the power supply and reference inputs to minimize noise. The conversion start (SC) pin initiates conversions, and the end-of-conversion (EOC) output can be used for interrupt-driven data transfer. For best performance, use a low-impedance analog source and a stable reference voltage.
Аналоги без доработки для ADC912BW/883 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ADC912A
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADC912B
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
AD7892-1
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
AD7892-2
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
AD7891
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ADC912BW/883 Максимальные параметры и электрические характеристики
| Разрешение | 12 bit |
| Conversion Time | 13.5 us |
| Integral Linearity Error | 0.0122% |
| Напряжение питания | 5 V |
| Technology | CMOS |
| Диапазон рабочих температур | -55°C to +125°C |
| Maximum Operating Temperature | 125 °C |
| Package Code | DIP |
| Package Shape | RECTANGULAR |
| Terminal Form | THROUGH-HOLE |
| Number of Terminals | 24 |
| Temperature Grade | MILITARY |
| Output Format | Binary / Offset Binary |
| Тип монтажа | Through Hole |
| Статус RoHS | unknown |
Конфигурация выводов ADC912BW/883
| Контакт 1 | VREF — Reference voltage input |
| Контакт 2 | AGND — Analog ground |
| Контакт 3 | VIN — Analog input |
| Контакт 4 | VIN- — Inverting analog input |
| Контакт 5 | VIN+ — Non-inverting analog input |
| Контакт 6 | DGND — Digital ground |
| Контакт 7 | VCC — Positive supply voltage (+5V) |
| Контакт 8 | VEE — Negative supply voltage |
| Контакт 9 | SC — Start conversion input |
| Контакт 10 | EOC — End of conversion output |
| Контакт 11 | DB0 — Data bit 0 (LSB) |
| Контакт 12 | DB1 — Data bit 1 |
| Контакт 13 | DB2 — Data bit 2 |
| Контакт 14 | DB3 — Data bit 3 |
| Контакт 15 | DB4 — Data bit 4 |
| Контакт 16 | DB5 — Data bit 5 |
| Контакт 17 | DB6 — Data bit 6 |
| Контакт 18 | DB7 — Data bit 7 |
| Контакт 19 | DB8 — Data bit 8 |
| Контакт 20 | DB9 — Data bit 9 |
| Контакт 21 | DB10 — Data bit 10 |
| Контакт 22 | DB11 — Data bit 11 (MSB) |
| Контакт 23 | CS — Chip select input |
| Контакт 24 | RD — Read input |
Типичное применение
ADC912BW/883 подходит для 6 применениеs: Military Avionics, Radar Systems, Industrial Process Control, Data Acquisition Systems, Test and Measurement Equipment, Medical Monitoring.
Military Avionics
The ADC912BW/883 is ideal for military avionics systems due to its military temperature range (-55°C to +125°C) and high reliability. It converts analog sensor signals from flight control systems, navigation, and engine monitoring into digital data for processing. Its 12-bit resolution and 13.5 us conversion time provide sufficient accuracy and speed for real-time control. The through-hole DIP package ensures robust mechanical connection in harsh vibration environments. Designers can interface it directly with microprocessors via the three-state bus, simplifying data acquisition.
Рекомендуется
Radar Systems
In radar systems, the ADC912BW/883 digitizes intermediate frequency (IF) signals for target detection and tracking. Its 12-bit resolution provides fine amplitude discrimination, while the 13.5 us conversion time supports moderate sampling rates. The military temperature range ensures operation in extreme environmental conditions. The device's CMOS technology offers low power consumption, critical for portable or battery-powered radar units. The binary output format simplifies interfacing with digital signal processors (DSPs) for further processing.
Рекомендуется
Industrial Process Control
The ADC912BW/883 is suitable for industrial process control systems that require high accuracy and reliability. It converts analog signals from temperature, pressure, and flow sensors into digital values for monitoring and control. Its 12-bit resolution and low integral linearity error (0.0122%) ensure precise measurement. The wide operating temperature range allows deployment in harsh industrial environments. The through-hole package is easy to replace in legacy systems, making it a practical choice for upgrades.
Рекомендуется
Data Acquisition Systems
The ADC912BW/883 is a core component in data acquisition systems, converting analog signals from various sensors into digital data for logging and analysis. Its 12-bit resolution provides good dynamic range, and the 13.5 us conversion time allows sampling rates up to 74 kSPS. The three-state bus interface enables easy connection to microcontrollers or PCs. The military temperature range ensures reliable operation in field data loggers used in extreme conditions. The device's low power consumption is beneficial for battery-powered systems.
Рекомендуется
Test and Measurement Equipment
The ADC912BW/883 is used in test and measurement equipment such as digital multimeters, oscilloscopes, and spectrum analyzers. Its 12-bit resolution and low linearity error ensure accurate measurements. The 13.5 us conversion time is adequate for many benchtop instruments. The military temperature range allows use in environmental test chambers. The through-hole package is compatible with prototyping boards, facilitating design and testing. The binary output format simplifies integration with display and processing circuits.
Рекомендуется
Medical Monitoring
The ADC912BW/883 can be used in medical monitoring equipment that requires high precision and reliability. It converts analog signals from sensors such as ECG, EEG, and blood pressure monitors into digital data for analysis. Its 12-bit resolution provides fine detail, and the low power consumption is suitable for portable devices. The military temperature range ensures operation in various clinical environments. The through-hole package is easy to service, making it suitable for equipment with long service life.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ADC912BW/883 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ADC912A | ADC912B | AD7892-1 | AD7892-2 | AD7891 |
|---|---|---|---|---|---|---|
| Package | DIP-24 | DIP-24 | DIP-24 | DIP-24 | DIP-24 | DIP-24 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Conversion Time | 13.5 us | 13.5 us | 13.5 us | 1.67 us | 1.67 us | 2 us |
| Temperature Range | -55°C to +125°C | 0°C to +70°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Interface | Parallel | Parallel | Parallel | Parallel | Serial | Parallel |
| Number of Channels | 1 | 1 | 1 | 1 | 1 | 8 |
Ключевые отличия
- Military temperature range (против ADC912A)
- Through-hole DIP package (против AD7892-1)
- Proven reliability (против AD7891)
Заметки по проектированию
The ADC912BW/883 requires a +5V supply for digital logic and a separate analog supply for the internal converter. Use separate analog and digital ground planes to minimize noise coupling. Decouple the power supply pins with 0.1uF ceramic capacitors placed close to the device, and use a 10uF tantalum capacitor for bulk decoupling. Ensure the reference voltage is stable and noise-free, as it directly affects conversion accuracy.
For optimal performance, place the ADC912BW/883 on a PCB with a solid ground plane. Keep analog input traces short and shielded from digital signals to prevent noise pickup. Use a star-ground topology to connect analog and digital grounds at a single point. The through-hole package allows for easy prototyping, but for production, consider using sockets to facilitate replacement.
A common pitfall is driving the analog input with a high-impedance source, which can cause sampling errors. Use a buffer amplifier with low output impedance to drive the ADC input. Also, ensure the conversion start (SC) signal is properly timed to avoid metastability. The EOC output should be monitored to ensure data is read only after conversion is complete.
Информация о соответствии
Compliance data not provided in verified sources. This is an obsolete military-grade part, likely manufactured before RoHS requirements.
