ADF4153YRUZ-RL7 - 4 GHz Fractional-N RF PLL | Analog Devices
Артикул: ADF4153YRUZ-RL7 ✓ АктивенADF4153YRUZ-RL7 Обзор
A fractional-N frequency synthesizer is a phase-locked-loop device that generates an adjustable output frequency while allowing fractional division of the reference frequency. In the broader hierarchy, the ADF4153 belongs to the clock-and-timing IC family, then PLL and frequency-synthesizer categories, and ultimately the semiconductor and signal-chain component ecosystem. Its programmable reference divider, low-noise digital phase-frequency detector, precision charge pump, and Sigma-Delta fractional-N circuitry form the core PLL control architecture.
The headline specifications include a 4 GHz maximum synthesis frequency, one synthesizer channel, a 16-lead TSSOP package, and an operating temperature range of -40°C to +125°C. The fractional-N architecture is valuable in RF systems because it permits fine frequency division without requiring every intermediate frequency to be a direct integer multiple of the reference. An external reference input supports synchronization with a shared system clock or precision frequency reference.
The synthesizer integrates a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, and Sigma-Delta fractional-N circuitry. These elements compare the divided feedback signal with the reference path and drive the charge pump to correct phase and frequency errors. Designers should use the manufacturer pin-description and register tables to configure divider ratios, reference settings, calibration behavior, and digital I/O functions.
Typical applications include wireless receiver and transmitter local oscillators, RF upconversion and downconversion chains, radio equipment, instrumentation, and communication infrastructure. The 4 GHz ceiling makes the device relevant to microwave and cellular RF paths, while fractional-N operation supports practical channel spacing and flexible output-frequency selection.
Layout quality directly affects PLL stability and phase noise. Place the reference and feedback paths away from noisy switching nodes, route high-speed signals over continuous ground planes, and follow the manufacturer reference-circuit layout. Use the pin-description table when assigning the 16 TSSOP leads and keep the power and ground connections as short as practical.
This page combines the 4 GHz operating point, package and temperature details, ordering-grade distinctions, verified sourcing links, and engineering guidance into a design-focused view of the ADF4153YRUZ-RL7. It helps engineers evaluate RF bandwidth, package constraints, automotive-temperature suitability, and replacement decisions before beginning board implementation.
Аналоги без доработки для ADF4153YRUZ-RL7 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ADF4153YRUZ-RL7 (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature Range, Architecture, Device Type, Phase Detector.
ADF4153YRUZ
✅ Прямая заменаУточнить цену
Открыть даташит →ADF4153YRUZ-RL
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADF4153WYRUZ-RL7
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADF4153YRUZ-RL7 Характеристики
| Product Type | Fractional-N frequency synthesizer |
| Maximum Synthesis Frequency | 4 GHz |
| Number of Synthesizer Channels | 1 channel |
| Phase Detector | Low-noise digital PFD |
| Charge Pump | Precision charge pump |
| Reference Divider | Programmable |
| Fractional-N Architecture | Sigma-Delta fractional-N |
| Reference Source | External |
| Диапазон рабочих температур | -40°C to +125°C |
| Package Type | 16-lead TSSOP |
| Package Width | 4.40 mm |
| Package Length | 4.40 mm (0.173 inch) |
| Число выводов | 16 pins |
| Тип монтажа | Surface mount |
Руководство по цоколевке ADF4153YRUZ-RL7 в корпусе 4.40 mm (0.173 inch)
Цоколевка для ADF4153YRUZ-RL7 (корпус 4.40 mm (0.173 inch)). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для ADF4153YRUZ-RL7.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ADF4153YRUZ-RL7 подходит для 6 применениеs: Wireless Receiver Local Oscillator, Wireless Transmitter Upconversion, RF Test and Measurement Equipment, Microwave Communication Front Ends, Radio Frequency Signal Generators, Industrial RF Monitoring Systems.
Wireless Receiver Local Oscillator
The ADF4153YRUZ-RL7 fits a wireless receiver local-oscillator block because it combines a 4 GHz maximum synthesis frequency, fractional-N operation, and a single synthesizer channel. Place it in the downconversion path to generate the local-oscillator signal required by the receiver mixer, using the programmable reference divider and Sigma-Delta fractional-N circuitry for channel selection. The -40°C to +125°C operating range supports demanding RF equipment. Exact reference frequency, divider limits, spur performance, and output-drive requirements must be confirmed in the manufacturer datasheet before layout release.
Рекомендуется
Wireless Transmitter Upconversion
In a wireless transmitter, the ADF4153YRUZ-RL7 can generate the programmable local-oscillator signal used in an RF upconversion chain. Its 4 GHz synthesis ceiling and fractional-N divider architecture support flexible frequency planning around a common external reference, while the single-channel configuration keeps the implementation focused on one RF source. The device must be checked against required output power, tuning range, lock-time, phase-noise, and spur limits. PCB placement should isolate the reference and feedback paths from transmitter power stages to preserve signal quality.
Рекомендуется
RF Test and Measurement Equipment
The ADF4153YRUZ-RL7 is appropriate for compact RF test equipment that requires a programmable local-oscillator reference. Its 4 GHz maximum synthesis frequency covers high-frequency measurement paths, while fractional-N operation allows the output frequency to be selected relative to an external reference. A single synthesizer can serve as the source for a mixer, converter, or signal-analysis fixture. For production instruments, evaluate phase noise, reference sensitivity, lock performance, output level, and temperature drift against the test specification. Keep the reference source and feedback routing short and well controlled.
Рекомендуется
Microwave Communication Front Ends
The ADF4153YRUZ-RL7 can serve as the synthesizer in microwave communication front ends requiring a local oscillator at or below 4 GHz. Fractional-N synthesis provides practical frequency granularity, and the external reference arrangement allows multiple RF functions to remain synchronized to a common source. Its 16-lead TSSOP package supports compact surface-mount designs. Integration engineers should confirm RF output characteristics, permitted reference frequencies, divider ratios, and supply requirements in the datasheet. Ground-plane continuity and separation from switching converters are especially important when phase-noise and spurious performance are critical.
Рекомендуется
Radio Frequency Signal Generators
A compact RF signal generator can use the ADF4153YRUZ-RL7 as its programmable synthesis element. The 4 GHz upper synthesis frequency supports RF test vectors near the lower microwave range, and the fractional-N control architecture permits flexible output selection from an external reference. The single-channel device is best suited to applications requiring one coherent RF output. Designers should verify output amplitude, tuning resolution, lock behavior, and allowable reference conditions, then follow the manufacturer reference layout to minimize coupling from digital control and power-conversion circuitry.
Рекомендуется
Industrial RF Monitoring Systems
The ADF4153YRUZ-RL7 is suitable for industrial RF monitoring equipment that needs a stable, programmable local oscillator. Its operating range of -40°C to +125°C supports installations with wide environmental variation, and the external reference permits synchronization with system timing or test equipment. The device can supply the oscillator used by a downconverter or RF detector front end. Verify phase noise, spurious signals, reference sensitivity, and supply tolerances for the intended measurement bandwidth. Use a controlled ground plane and follow the recommended decoupling and signal-routing arrangement to maintain predictable RF behavior.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ADF4153YRUZ-RL7 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ADF4153YRUZ | ADF4153YRUZ-RL | ADF4153WYRUZ-RL7 |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-lead TSSOP | 16-lead TSSOP - same | 16-lead TSSOP - same | 16-lead TSSOP - same |
| Product Type | Fractional-N frequency synthesizer | Fractional-N frequency synthesizer | Fractional-N frequency synthesizer | Fractional-N RF frequency synthesizer |
Ключевые отличия
- Wide-temperature 16-lead TSSOP ordering configuration (против ADF4153YRUZ)
- Direct family replacement with identical headline RF ratings (против ADF4153WYRUZ-RL7)
- Same-family pin-compatible sourcing path (против ADF4153YRUZ-RL)
Заметки по проектированию
Use the manufacturer reference layout for the 16-lead TSSOP footprint and pin orientation. Keep the reference input and divider-feedback traces short, continuous, and away from switching-regulator and digital-clock nodes. A continuous ground plane under the device reduces return-path discontinuities, while keeping power and signal returns close to their associated pins helps control coupling. Use the Pin Description table in the Analog Devices datasheet to identify every power, ground, reference, feedback, and digital-control connection before routing the board.
Follow the manufacturer's recommended power-supply decoupling network and component placement exactly. Place the required capacitors at the associated supply and ground pins rather than distributing them around the board, and minimize the loop area between each capacitor and the IC. Confirm the permitted supply range, ground configuration, and startup requirements in the datasheet before adding analog or RF stages. Erring toward lower supply voltage is not safe unless the complete operating region is explicitly specified.
Treat the reference, feedback, and RF output paths as sensitive high-frequency routes. Avoid adding test pads or long stubs where they interrupt controlled impedance, and separate switching-node copper from the reference and feedback network. A low-noise digital phase-frequency detector can reduce internally generated phase noise, but poor grounding and reference coupling can still degrade the final signal. Validate the assembled board with a spectrum analyzer and verify lock behavior across the intended reference and temperature conditions.
Do not treat every ADF4153 ordering code as automatically interchangeable. Confirm the temperature grade, qualification wording, packaging option, and register-compatible ordering suffix in the manufacturer documentation before substitution. The ADF4153BCPZ-RL7 uses a 20-lead VFQFN package and cannot replace the 16-lead TSSOP ADF4153YRUZ-RL7 without a PCB redesign. Likewise, verify software configuration and register requirements when moving between ordering codes even when their headline frequency and channel ratings match.
Информация о соответствии
The documented -40°C to +125°C operating range does not by itself establish automotive qualification. Confirm RoHS, REACH, halogen-free, conflict-minerals, and exact automotive qualification statements in the manufacturer product documentation for the selected ordering code.