ADF4155BCPZ-RL7 - 4GHz Fractional-N PLL | Analog Devices
Артикул: ADF4155BCPZ-RL7 ✓ АктивенADF4155BCPZ-RL7 Обзор
A fractional-N phase-locked loop is a frequency-generation architecture that divides a reference frequency through programmable integer and fractional ratios. This PLL synthesizer category belongs to the broader hierarchy of clock-generation ICs, frequency synthesizers, RF integrated circuits, and timing-control semiconductors. The architecture is useful when a system requires precise frequency ratios, programmable channel spacing, or an output frequency generated from a stable reference.
Key features include support for both fractional-N and integer-N operation, a programmable modulus for high-resolution frequency synthesis, and an external VCO interface. The ADF4155 family supports external VCO frequencies up to 8 GHz, while the target device is identified as a 4 GHz PLL. The 24-lead exposed-pad package supports compact RF designs, although the exposed pad must be connected to the appropriate ground plane and thermal path.
Technically, the device combines a low-noise digital phase-frequency detector, a precision charge pump, programmable reference division, and a sigma-delta fractional-N mechanism. The external loop filter allows designers to tune loop bandwidth, phase noise, settling time, and reference-spur performance for a particular VCO and system requirement. Because the ADF4155 does not contain the VCO, loop filter, or reference oscillator, its performance depends on those external components as well as the selected divider and modulus values.
Typical applications include RF transceiver local oscillators, wireless communication equipment, test and measurement instruments, microwave down-converters, frequency converters, clock-generation systems, and instrumentation requiring programmable output frequencies. The fractional-N architecture is particularly useful when a narrow channel spacing must be synthesized without using an impractically low intermediate frequency or an extremely high reference frequency.
PCB implementation requires a short, controlled RF feedback path between the loop-filter network and VCO, short charge-pump connections, continuous ground-plane coverage under the exposed pad, and careful separation between sensitive analog timing nodes and noisy digital or switching circuitry. Component tolerances and parasitic capacitance in the loop filter can change both lock behavior and phase noise, so the complete filter network should be simulated with the intended VCO model.
This product page combines the device identity, package information, PLL operating concept, replacement analysis, and application-specific design guidance. It also identifies where manufacturer documentation should be used to verify the complete 24-pin assignment, programming interface, electrical limits, and final loop-filter values before release to manufacturing.
Аналоги без доработки для ADF4155BCPZ-RL7 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ADF4155BCPZ-RL7 (тот же форм-фактор и посадочное место) — отличается по Maximum Output Frequency, Package, Product Type.
ADF4155BCPZ
✅ Прямая заменаУточнить цену
Открыть даташит →ADF4155BCPZ-RL7 Характеристики
| Product Type | Integer-N/fractional-N PLL frequency synthesizer |
| Maximum Synthesizer Frequency | 4 GHz |
| Maximum External VCO Frequency | 8 GHz |
| Minimum Reference Frequency | 10 MHz |
| Maximum Output Frequency | 4000 MHz |
| PLL Architecture | Integer-N or fractional-N |
| Fractional Modulus | Programmable, high-resolution modulus |
| Phase Detector | Low-noise digital phase-frequency detector |
| Charge Pump | Precision charge pump |
| Loop Filter | External |
| Voltage-Controlled Oscillator | External |
| Reference Source | External reference frequency |
| Number of Circuits | 1 circuit |
| Корпус | 24-lead LFCSP with exposed pad |
| Package Pin Count | 24 pins |
| Тип монтажа | Surface mount |
| Статус RoHS | Compliant |
Руководство по цоколевке ADF4155BCPZ-RL7 в корпусе 24 pins
Цоколевка для ADF4155BCPZ-RL7 (корпус 24 pins). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для ADF4155BCPZ-RL7.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ADF4155BCPZ-RL7 подходит для 6 применениеs: RF Transceiver Local Oscillator, Wireless Down-Converter, Microwave Frequency Converter, RF Test and Measurement Instrument, Instrumentation Signal-Source Module, Clock and Carrier Generation.
RF Transceiver Local Oscillator
The ADF4155BCPZ-RL7 fits a programmable transceiver local-oscillator block because it combines integer-N and fractional-N synthesis with external VCO support up to 8 GHz. The designer connects a stable reference, external VCO, and calculated loop filter to create the required channel frequency. Fractional-N operation is valuable when channel spacing is narrow, although the selected VCO tuning range and loop bandwidth must guarantee lock across every programmed frequency. The 24-lead exposed-pad package keeps the synthesizer compact, while continuous grounding beneath the exposed pad is important for RF stability and heat transfer.
Рекомендуется
Wireless Down-Converter
In a wireless down-converter, the ADF4155BCPZ-RL7 can synthesize the local-oscillator frequency applied to a mixer, allowing channel selection to be controlled digitally. Its 4 GHz synthesizer rating and external-VCO capability to 8 GHz support multiple RF plans when the chosen VCO has adequate tuning range. The external loop filter lets engineers trade lock time against phase noise and reference spur performance. A low-noise reference and carefully routed charge-pump feedback are essential because phase noise and close-in spur levels can degrade receiver sensitivity.
Рекомендуется
Microwave Frequency Converter
The ADF4155BCPZ-RL7 is suitable for a microwave frequency-converter control block where an external VCO must be tuned to a precise intermediate frequency. Fractional-N division allows accurate offset synthesis from a stable reference without requiring every desired output to use a conventional integer divider ratio. The resulting phase noise and spur performance depend on reference quality, loop bandwidth, charge-pump settings, and VCO phase-noise characteristics. PCB layout should keep the loop-filter path compact and isolate the sensitive feedback node from digital clocks and switching supplies.
Рекомендуется
RF Test and Measurement Instrument
The ADF4155BCPZ-RL7 can provide programmable source and LO frequencies for RF test equipment that requires accurate channel-by-channel frequency selection. Its fractional-N operation supports fine frequency increments, while the external loop filter and VCO permit optimization for different phase-noise and settling-time targets. Instrument designers should characterize lock time over the full tuning range rather than at one nominal frequency. The exposed pad should be tied to a continuous ground plane and thermally connected to provide a stable low-impedance return for high-speed charge-pump signals.
Рекомендуется
Instrumentation Signal-Source Module
The ADF4155BCPZ-RL7 is useful in instrumentation modules that need a programmable reference-derived output for excitation, conversion, or calibration. Integer-N mode provides straightforward integer ratios, while fractional-N mode enables finer channel spacing when the external VCO can resolve the corresponding tuning steps. Because the chip excludes the VCO and loop filter, the source module can be optimized independently for phase noise and range. Firmware should verify lock status and reject out-of-range programmed values before enabling measurement outputs.
Рекомендуется
Clock and Carrier Generation
The ADF4155BCPZ-RL7 can generate a programmable carrier referenced to a stable external clock for communications, conversion, and signal-processing systems. Integer-N operation is appropriate when the required ratio is an integer, while fractional-N operation supports precise offsets between related channels. The design must include a VCO whose tuning range covers the intended carrier plan and a loop filter optimized for the required settling time. Digital programming lines should be separated from the charge-pump and feedback network to prevent coupling into the synthesized output.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ADF4155BCPZ-RL7 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ADF4155BCPZ |
|---|---|---|
| Package | 24-lead LFCSP with exposed pad | 24-lead LFCSP with exposed pad |
| Brand | Analog Devices | Analog Devices |
| Product Type | Integer-N/fractional-N PLL frequency synthesizer | Integer-N/fractional-N PLL frequency synthesizer |
| Maximum Synthesizer Frequency | 4 GHz | 4 GHz |
| Maximum External VCO Frequency | 8 GHz | 8 GHz |
| Minimum Reference Frequency | 10 MHz | 10 MHz |
| Maximum Output Frequency | 4000 MHz | 4000 MHz |
| Loop Filter | External | External |
| VCO | External | External |
| Number of Circuits | 1 circuit | 1 circuit |
| RoHS Status | Compliant | Compliant |
| Orderable Packaging | Reel | Tray |
Ключевые отличия
- Fractional-N and integer-N synthesis in one device (против ADF4155BCPZ)
- Reel-packed configuration for automated assembly (против ADF4155BCPZ)
- Flexible external VCO and loop-filter implementation (против ADF4155BCPZ)
Заметки по проектированию
Connect the exposed pad to a continuous ground plane using the land pattern in the Analog Devices package drawing. Keep the charge-pump and feedback nodes short, and place the loop-filter components close to the corresponding pins. Route programming signals away from the sensitive feedback path to reduce coupling that can appear as phase noise or reference spurs.
Do not assume lock is guaranteed merely because the requested output lies inside the synthesizer's frequency range. Confirm that the external VCO tuning range, reference ratio, integer divider limits, fractional modulus, and programmed charge-pump settings produce a valid lock solution. Simulate lock range and phase margin with realistic component tolerances before production release.
Use a low-noise, stable reference because reference phase noise and spurs can appear directly at the synthesized output. Account for PCB and component parasitics in the loop-filter calculation, and test acquisition time across the complete VCO tuning band. A loop optimized at one channel may not provide adequate margin at the band edges.
Provide uninterrupted ground and copper area beneath the exposed pad so the package can transfer heat without creating an RF return discontinuity. Review the final assembly's junction-temperature budget under worst-case reference activity and digital-bus loading. Use the manufacturer thermal information for the exact package and board construction when sizing the thermal path.
Информация о соответствии
RoHS compliance is identified for the target part. REACH, AEC-Q100 qualification, lead-free status, halogen-free status, and conflict-minerals status are unknown.