ADS127L11 - 24-Bit 400-kSPS Delta-Sigma ADC | Texas Instruments
Артикул: ADS127L11 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.25 | $112,50 |
| 100 | $9.8 | $980,00 |
| 500 | $8.9 | $4.450,00 |
| 1.000 | $8.1 | $8.100,00 |
ADS127L11 Обзор
A delta-sigma ADC is a type of analog-to-digital converter that uses oversampling and noise shaping to achieve high resolution (typically 16 to 32 bits) with relatively low cost and power. It is part of the ADC family, which converts continuous analog signals into discrete digital values. Delta-sigma ADCs are widely used in precision measurement, audio, and industrial control where high resolution and low noise are critical. They differ from SAR ADCs in that they trade speed for resolution and often include digital filters for anti-aliasing.
Key features of the ADS127L11 include a programmable digital filter (wideband or low-latency), a 24-bit resolution, and a maximum sample rate of 1067 kSPS. The device supports both SPI and frame-sync serial interfaces, and includes an internal reference buffer and input buffer. It offers a signal-to-noise ratio (SNR) of dB and a total harmonic distortion (THD) of dB. The power consumption is 18.6 mW in high-speed mode, making it suitable for battery-powered and portable instruments.
Technically, the ADS127L11 uses a fourth-order delta-sigma modulator with a digital decimation filter. The wideband filter provides a passband up to 0.45 × data rate, while the low-latency filter offers faster settling for multiplexed applications. The device includes a reference buffer that allows the use of external references with high impedance, and an input buffer that reduces the kickback from the switched-capacitor input stage. The ADC operates from a single 3.3V or 5V supply, with a digital I/O supply from 1.8V to 3.6V.
Typical applications include vibration monitoring, industrial process control, medical instrumentation (e.g., EEG, ECG), and high-precision data acquisition systems. The high data rate and low latency make it ideal for closed-loop control and real-time monitoring. The integrated buffers simplify the analog front-end, reducing component count and board space.
When designing with the ADS127L11, ensure proper decoupling of the AVDD and DVDD supplies, and use a low-noise reference. The input buffer requires a bias voltage, and the reference buffer should be bypassed with a capacitor. For best performance, keep the analog input traces short and shielded from digital noise.
Аналоги без доработки для ADS127L11 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ADS127L11 (тот же форм-фактор и посадочное место) — отличается по Architecture, Input Type, Package, Dynamic Range, Interface.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ADS127L21
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ADS127L14
⚡ Тот же корпус ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ADS127L18
⚡ Тот же корпус ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ADS127L11IRUKR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADS127L11IPWR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADS127L11 Максимальные параметры и электрические характеристики
| Разрешение | 24 bit |
| Number of Channels | 1 |
| Sampling Rate (Max) | 400 kSPS (wideband), 1067 kSPS (low-latency) |
| Architecture | Delta-Sigma |
| Input Type | Differential |
| Интерфейс | SPI, Frame-Sync |
| Power Consumption | 18.6 mW (high-speed mode) |
| Supply Voltage (Analog) | 3.3 V or 5 V |
| Supply Voltage (Digital I/O) | 1.8 V to 3.6 V |
| Корпус | 20-TSSOP (IPWR), 20-VQFN (IRUKR) |
| Диапазон рабочих температур | -40C to +125C |
| Input Buffer | Yes |
| Reference Buffer | Yes |
| Digital Filter | Wideband and Low-Latency |
| Статус RoHS | Compliant |
Конфигурация выводов ADS127L11
| Контакт 1 | AVDD — Analog power supply |
| Контакт 2 | AINP — Positive analog input |
| Контакт 3 | AINN — Negative analog input |
| Контакт 4 | REFN — Negative reference input |
| Контакт 5 | REFP — Positive reference input |
| Контакт 6 | AVSS — Analog ground |
| Контакт 7 | DVDD — Digital power supply |
| Контакт 8 | DGND — Digital ground |
| Контакт 9 | SCLK — Serial clock input |
| Контакт 10 | DOUT — Serial data output |
| Контакт 11 | DIN — Serial data input |
| Контакт 12 | CS — Chip select (active low) |
| Контакт 13 | SYNC — Synchronization input |
| Контакт 14 | MODE — Interface mode select |
| Контакт 15 | RESET — Reset input (active low) |
| Контакт 16 | PWDN — Power-down input |
| Контакт 17 | CLK — Master clock input |
| Контакт 18 | NC — No connect |
| Контакт 19 | NC — No connect |
| Контакт 20 | AVDD — Analog power supply |
Типичное применение
ADS127L11 подходит для 6 применениеs: Vibration Monitoring, Medical Instrumentation, Industrial Process Control, Test and Measurement, Audio Test Equipment, Energy Monitoring.
Vibration Monitoring
The ADS127L11's high data rate (up to 400 kSPS) and 24-bit resolution enable precise vibration analysis in industrial machinery. Its low power consumption (18.6 mW) allows deployment in battery-powered wireless sensors. The integrated input buffer simplifies interfacing with piezoelectric accelerometers, reducing external components and improving signal integrity.
Рекомендуется
Medical Instrumentation
For EEG and ECG applications, the ADS127L11 provides high resolution and low noise, essential for capturing small biopotential signals. The low-latency filter enables real-time monitoring, and the integrated reference buffer allows precise reference voltage. Its low power is ideal for portable medical devices, and the SPI interface simplifies data transfer to microcontrollers.
Рекомендуется
Industrial Process Control
The ADS127L11's wide bandwidth and high accuracy make it suitable for industrial process control loops. It can digitize sensor signals from temperature, pressure, and flow transmitters with high precision. The device's low power and small package (20-TSSOP) allow integration into compact control modules, and the frame-sync interface supports synchronized multi-channel systems.
Рекомендуется
Test and Measurement
In data acquisition systems, the ADS127L11 offers high resolution and fast sampling, enabling accurate capture of transient signals. The low-latency filter is beneficial for triggered measurements, and the input buffer reduces loading on the signal source. Its wide supply range and SPI interface make it versatile for benchtop instruments and modular DAQ systems.
Рекомендуется
Audio Test Equipment
The ADS127L11's high SNR and low distortion are critical for audio analysis. It can digitize audio signals with high fidelity, and its low power consumption is beneficial for portable audio testers. The wideband filter supports full audio bandwidth, and the SPI interface allows easy integration with DSPs for real-time analysis.
Рекомендуется
Energy Monitoring
The ADS127L11 can be used in energy metering and power quality analysis. Its high resolution and sampling rate enable accurate measurement of voltage and current waveforms. The integrated buffers simplify connection to current transformers and voltage dividers, and the low power is suitable for smart meters. The SPI interface allows communication with metering SoCs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ADS127L11 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ADS127L21 | ADS127L14 | ADS127L18 |
|---|---|---|---|---|
| Package | 20-TSSOP (IPWR) | 20-TSSOP | 20-TSSOP | 20-TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Number of Channels | 1 | 2 | 4 | 8 |
| Max Data Rate (Wideband) | 400 kSPS | 400 kSPS | 400 kSPS | 400 kSPS |
| Max Data Rate (Low-Latency) | 1067 kSPS | 1067 kSPS | 1067 kSPS | 1067 kSPS |
| Power Consumption | 18.6 mW | 18.6 mW | 18.6 mW | 18.6 mW |
| Input Buffer | Yes | Yes | Yes | Yes |
| Reference Buffer | Yes | Yes | Yes | Yes |
Ключевые отличия
- Higher maximum data rate than many competing 24-bit delta-sigma ADCs (против ADS127L21)
- Integrated input and reference buffers reduce external component count (против ADS127L14)
- Low power consumption of 18.6 mW (против ADS127L18)
Заметки по проектированию
Decouple AVDD and DVDD with 10uF and 0.1uF capacitors placed close to the pins. Use separate analog and digital grounds to minimize noise coupling. The device operates from 3.3V or 5V analog supply; ensure the digital I/O supply (DVDD) is within 1.8V to 3.6V to match the host interface.
For optimal performance, use a low-noise reference and bypass the REFP and REFN pins with 10uF and 0.1uF capacitors. The input buffer requires a bias voltage; connect a 0.1uF capacitor from AINP and AINN to ground. Keep analog input traces short and shielded from digital signals.
Avoid exceeding the absolute maximum ratings on the analog inputs. Ensure the master clock (CLK) is stable and within the specified frequency range. The SYNC pin can be used to synchronize multiple ADCs; tie it high if not used. Always reset the device after power-up to ensure proper initialization.
Информация о соответствии
RoHS compliant per TI product page. Not AEC-Q100 qualified.
