ADS7808U - 12-Bit 100 kHz SAR ADC | Texas Instruments
Артикул: ADS7808U ✓ АктивенADS7808U Обзор
An ADC is an analog-to-digital converter, a mixed-signal semiconductor that converts a continuous voltage into a numeric code for measurement, control, or processing. The ADS7808 belongs to the SAR ADC hierarchy, where successive approximation compares the sampled input against a capacitor DAC. Compared with flash, pipelined, and sigma-delta converters, this architecture provides straightforward low-power conversion and a compact serial interface suitable for embedded acquisition systems.
Key features include a maximum sampling rate of 100 kHz, 12-bit resolution, and linearity specified as ±1/2 LSB for INL and DNL. The converter operates from a single +5 V supply, uses a serial output, and accepts one analog input. Its maximum power dissipation is 100 mW. Pin compatibility with the 16-bit ADS7809 provides an upgrade path when greater resolution is needed without changing the package architecture.
Internally, the ADS7808 uses state-of-the-art CMOS structures and supports conversion with its internal clock or synchronization to an external data clock. An output synchronization pulse simplifies interfacing with DSP-based systems. The internal reference can be used for standalone operation, while an external reference offers a route to improve stability or share precision reference circuitry across multiple channels.
Typical applications include industrial process measurement, factory automation, DSP data acquisition, closed-loop control, and embedded instrumentation. The 100 kHz conversion rate and 12-bit code width are suitable for signals where rapid sampling and moderate resolution are required. The device is also appropriate for battery-powered or compact industrial systems because its stated maximum power dissipation is only 100 mW.
When designing a circuit around the ADS7808U, verify the selected input range, reference configuration, logic levels, and digital interface timing against the manufacturer datasheet. Decoupling and analog signal-path layout are critical because the converter contains a sample-and-hold stage and may be sensitive to supply and reference noise. Confirm the complete conversion and data-read cycle before synchronizing it to a DSP.
This page consolidates verified manufacturer and distributor information, package details, application guidance, and clearly qualified drop-in alternatives. It also highlights where direct cross-reference evidence is limited and where engineers must verify pin behavior, electrical limits, and availability before approving a replacement.
Аналоги без доработки для ADS7808U — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ADS7808U (тот же форм-фактор и посадочное место) — отличается по Package, Resolution, Number of Input Channels, Sampling Rate, Supply Voltage.
ADS7808U/1K
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADS7808UG4
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADS7808UE4
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADS7822U
✅ Прямая заменаУточнить цену
Открыть даташит →ADS7807UBE4
✅ Прямая заменаУточнить цену
Открыть даташит →ADS7808U Максимальные параметры и электрические характеристики
| Разрешение | 12 bits |
| Conversion Time | 10 µs |
| Частота дискретизации | 100 kHz |
| Signal-to-Noise and Distortion | 72 dB SINAD with 45 kHz input |
| Integral Nonlinearity | ±1/2 LSB |
| Differential Nonlinearity | ±1/2 LSB |
| Number of Input Channels | 1 channel |
| Input Ranges | 6 specified ranges |
| ADC Architecture | 12-bit capacitor-based SAR |
| Sample-and-Hold | Internal sample-and-hold circuit |
| Reference | Internal or external reference |
| Напряжение питания | +5 V |
| Maximum Power Dissipation | 100 mW |
| Output Interface | Serial output |
| Clocking | Internal clock or external data-clock synchronization |
| Output Synchronization | Synchronization pulse |
| Корпус | 20-pin SOIC, 0.3 inch body width |
| Тип монтажа | Surface mount |
| Рабочая температура | -40 °C to +85 °C |
| Pin-Compatible Upgrade | 16-bit ADS7809 |
| Recommended Voltage References | REF02 and REF102 |
Руководство по цоколевке ADS7808U в корпусе 20-pin soic, 0.3 inch body width
Цоколевка для ADS7808U (корпус 20-pin soic, 0.3 inch body width). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для ADS7808U.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ADS7808U подходит для 6 применениеs: Industrial Process Measurement, Factory Automation and Control, DSP Data Acquisition, Embedded Instrumentation, Closed-Loop Feedback Control, Portable Measurement Equipment.
Industrial Process Measurement
The Texas Instruments ADS7808U fits industrial process measurement because it combines a 100 kHz sampling rate, 12-bit resolution, and 72 dB SINAD with a 45 kHz input. Its six specified input ranges allow a conditioned sensor signal to be mapped to an appropriate converter range. The converter is placed behind the transmitter’s signal-conditioning network, with the serial result read by a controller or DSP. The 10-µs conversion time supports rapid acquisition, while the single +5 V supply simplifies system integration. Designers should still verify input bandwidth, settling time, isolation, and industrial surge requirements, because the converter does not replace the protection and conditioning circuitry ahead of its analog input.
Рекомендуется
Factory Automation and Control
ADS7808U is appropriate for factory automation loops that measure a single analog process variable and need deterministic digital conversion. Its 100 kHz sampling capability and 10-µs conversion time allow the controller to observe changing actuator or sensor conditions more rapidly than a slow display-oriented ADC. A typical circuit conditions the sensor current or voltage, connects it to one of the six supported input ranges, and transfers the 12-bit code through the serial interface. The single +5 V operation reduces supply complexity. For machinery, isolate the analog front end and validate EMC, grounding, and transient protection independently rather than assuming the bare ADC package provides industrial ruggedness.
Рекомендуется
DSP Data Acquisition
The ADS7808U can feed a DSP-based acquisition system that needs compact, low-power conversion without the complexity of a high-resolution multichannel converter. Its internal clock supports standalone operation, while external data-clock synchronization and the output synchronization pulse help align acquisition with digital processing. The serial interface reduces the number of signal lines required around a 20-pin SOIC, and the specified 100 mW maximum power dissipation supports space- and power-conscious embedded designs. System designers should calculate the complete sample transaction, including acquisition, conversion, and serial transfer, and ensure the DSP supports the converter’s timing and logic levels.
Рекомендуется
Embedded Instrumentation
ADS7808U is well suited to embedded instrumentation where a compact instrument must acquire an analog measurement and present it digitally. The 12-bit code provides 4096 discrete levels, while the 100 kHz sampling rate and 72 dB SINAD are useful for dynamic measurement rather than only static readings. The converter can use its internal reference for simplicity or an external reference when greater system-level stability is required. REF02 and REF102 are specifically identified as recommended references. Place the input filter, reference, and bypass components close to the device, and account for the ADC’s front-end settling behavior when changing the selected input range.
Рекомендуется
Closed-Loop Feedback Control
The ADS7808U can serve as the measurement element in a closed-loop feedback controller because it converts a conditioned analog feedback signal in 10 µs and supports external-clock synchronization. The 12-bit resolution gives the controller 4096 code levels, and the six available input ranges can match different actuator feedback signals. The resulting code is read serially and used to adjust power, position, flow, or another control variable. Designers should confirm that the loop bandwidth, acquisition latency, serial transfer time, and output-code step size meet the control dynamics. The ADC should be paired with filtering that rejects noise without adding excessive group delay.
Рекомендуется
Portable Measurement Equipment
The ADS7808U is appropriate for portable measurement equipment because it offers a 100 kHz sampling rate and a 12-bit result in a compact 20-pin SOIC, with maximum power dissipation specified at 100 mW. It can operate from one +5 V supply and use an internal reference to reduce the number of external precision components. In a handheld tester, the analog sensor or input network feeds the ADC, while a controller reads the serial data and applies calibration. Battery operation still requires careful attention to regulator efficiency, analog noise, and input-signal settling, but the converter’s stated power ceiling supports space-constrained designs when thermal margins are acceptable.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ADS7808U — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ADS7808U/1K | ADS7808UG4 | ADS7808UE4 | ADS7822U | ADS7807U |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 20-pin SOIC | 20-pin SOIC - same | 20-pin SOIC - same | 20-pin SOIC - same | 20-pin SOIC - same | 20-pin SOIC - same |
| Resolution | 12 bits | 12 bits | 12 bits | 12 bits | 12 bits | 12 bits |
| Input Channels | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel |
Ключевые отличия
- Documented 72 dB SINAD performance (против ADS7808U/1K)
- Pin-compatible path to 16-bit resolution (против ADS7809)
- Low stated power dissipation (против ADS7808UG4)
- Multiple analog ranges with external-reference flexibility (против ADS7808UE4)
Заметки по проектированию
Route the analog input and reference signals away from the serial clock and data lines. Keep the input conditioning components close to ADS7808U, use a short ground-return path, and place supply bypass capacitors at the device power pins. The converter contains a sample-and-hold stage and a 12-bit SAR core, so input settling and return-path geometry directly affect code accuracy even when the clock rate is below 100 kHz.
Design the +5 V rail to support the ADC and the required reference option without introducing noise into the conversion. The verified maximum power dissipation is 100 mW, but that figure does not determine total system heat or analog supply quality. Use separate routing or filtering between noisy digital circuitry and the ADC supply when necessary, and verify reference startup and settling before taking the first valid conversion.
Do not treat the 100 kHz sampling rate as permission to change input ranges without allowing acquisition and reference settling time. The 10-µs conversion time covers conversion, while the complete system transaction also includes command handling and serial transfer. Confirm the selected input range, clock polarity, conversion-start behavior, and output synchronization using the manufacturer datasheet to avoid reading stale or incorrectly scaled conversion data.
Use a controlled reference source when measurement repeatability depends on more than the internal reference can provide. Texas Instruments identifies REF02 and REF102 as recommended references, but each reference still requires suitable decoupling and grounding. Account for reference noise, temperature drift, and startup behavior in the system error budget. For externally clocked operation, ensure the data clock and synchronization pulse meet the interface timing shown in the manufacturer datasheet.
Информация о соответствии
The supplied manufacturer and distributor results do not extract explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements. AEC-Q100 is not applicable to the general-purpose ADC category; no automotive-qualified ADS7808U variant is identified in the verified data.
