ADUM3151BRSZ - 7-Ch SPI Digital Isolator | Analog Devices
Артикул: ADUM3151BRSZ ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $11.06 | $11,06 |
| 10 | $10.2 | $102,00 |
| 100 | $9.35 | $935,00 |
| 500 | $8.5 | $4.250,00 |
| 1.000 | $7.8 | $7.800,00 |
ADUM3151BRSZ Обзор
A digital isolator is a component that provides electrical isolation between two circuits while allowing digital signals to pass across the isolation barrier. It is essential in applications where ground potential differences, noise, or safety requirements demand galvanic isolation. The ADUM3151BRSZ uses Analog Devices' iCoupler chip-scale transformer technology, which offers superior performance compared to optocouplers in terms of speed, power consumption, and reliability.
Key features include low propagation delay of 14 ns on the CLK, MO/SI, MI/SO, and SS channels, supporting SPI clock rates up to 17 MHz. The device also features a 7-channel configuration with three forward channels and four reverse channels, making it ideal for full-duplex SPI communication. The high CMTI of 25 kV/µs ensures reliable operation in noisy industrial environments.
The ADUM3151BRSZ is designed for isolated SPI interfaces in applications such as industrial automation, motor control, and data acquisition systems. Its low propagation delay and high data rate enable high-speed SPI communication across the isolation barrier without significant timing degradation. The device also includes an enable pin for power management and a thermal shutdown feature for protection.
When designing with the ADUM3151BRSZ, ensure proper PCB layout with adequate creepage and clearance distances for the isolation rating. The device requires a bypass capacitor on both supply pins to maintain signal integrity. The SSOP-20 package is suitable for space-constrained designs, and the device is RoHS compliant.
Аналоги без доработки для ADUM3151BRSZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ADUM3151BRSZ (тот же форм-фактор и посадочное место) — отличается по Package, Technology, Propagation Delay, RoHS Status, Supply Voltage.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ADUM3152BRSZ
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$5.81 / шт.
Открыть даташит →ADUM3153BRSZ
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$3.35 / шт.
Открыть даташит →ADUM3151BRSZ Характеристики
| Number of Channels | 7 |
| Isolation Voltage | 3750 Vrms |
| Скорость передачи данных | 34 Mbps |
| CMTI | 25 kV/µs |
| Propagation Delay | 14 ns |
| Напряжение питания | 3 V to 5.5 V |
| Корпус | 20-SSOP (0.209", 5.30mm Width) |
| Рабочая температура | -40°C to +125°C |
| Technology | iCoupler |
| SPI Clock Rate | 17 MHz |
| Forward Channels | 3 |
| Reverse Channels | 4 |
| RoHS | Compliant |
| Тип монтажа | Surface Mount |
| Количество выводов | 20 |
Конфигурация выводов ADUM3151BRSZ
| Контакт 1 | VDD1 — Supply voltage side 1 |
| Контакт 2 | GND1 — Ground side 1 |
| Контакт 3 | VOA — Output channel A |
| Контакт 4 | VIA — Input channel A |
| Контакт 5 | VOB — Output channel B |
| Контакт 6 | VIB — Input channel B |
| Контакт 7 | VOC — Output channel C |
| Контакт 8 | VIC — Input channel C |
| Контакт 9 | VOD — Output channel D |
| Контакт 10 | VID — Input channel D |
| Контакт 11 | GND2 — Ground side 2 |
| Контакт 12 | VDD2 — Supply voltage side 2 |
| Контакт 13 | VOE — Output channel E |
| Контакт 14 | VIE — Input channel E |
| Контакт 15 | VOF — Output channel F |
| Контакт 16 | VIF — Input channel F |
| Контакт 17 | VOG — Output channel G |
| Контакт 18 | VIG — Input channel G |
| Контакт 19 | EN — Enable pin |
| Контакт 20 | NC — No connect |
Типичное применение
ADUM3151BRSZ подходит для 6 применениеs: Industrial Automation, Motor Control, Data Acquisition Systems, Medical Equipment, Renewable Energy Systems, Automotive Electronics.
Industrial Automation
The ADUM3151BRSZ provides isolated SPI communication in industrial automation systems, such as PLCs and motor drives. Its 3750 Vrms isolation and 25 kV/µs CMTI ensure reliable data transfer in noisy environments. The low propagation delay of 14 ns supports high-speed SPI, enabling real-time control of sensors and actuators. The device's wide temperature range (-40°C to +125°C) makes it suitable for harsh industrial conditions.
Рекомендуется
Motor Control
In motor control applications, the ADUM3151BRSZ isolates the microcontroller from the power stage, protecting low-voltage logic from high-voltage transients. The high CMTI of 25 kV/µs prevents false triggering during fast switching events. The device supports SPI communication for configuring motor drivers and reading encoder data. Its compact SSOP-20 package fits space-constrained designs, and the 3 V to 5.5 V supply range allows interfacing with various logic levels.
Рекомендуется
Data Acquisition Systems
The ADUM3151BRSZ is used in data acquisition systems to isolate the ADC from the host controller, preventing ground loops and noise. Its 34 Mbps data rate allows high-speed transfer of sampled data. The 7-channel configuration provides dedicated lines for SPI signals, ensuring synchronized communication. The device's low propagation delay minimizes timing errors, which is critical for accurate data capture. It operates over a wide temperature range, making it suitable for remote sensing applications.
Рекомендуется
Medical Equipment
The ADUM3151BRSZ provides galvanic isolation in medical devices, ensuring patient safety by isolating sensitive electronics from high-voltage sections. Its 3750 Vrms isolation rating meets safety standards for medical equipment. The low power consumption and high data rate make it suitable for portable monitoring devices. The device's small SSOP-20 package enables compact designs, and its wide temperature range ensures reliable operation in clinical environments.
Рекомендуется
Renewable Energy Systems
In solar inverters and wind turbines, the ADUM3151BRSZ isolates control electronics from high-voltage power stages. Its high CMTI ensures reliable communication in the presence of fast switching transients. The device supports SPI for monitoring and controlling power converters. The wide operating temperature range and robust isolation make it ideal for outdoor installations. The 3 V to 5.5 V supply range allows integration with low-power microcontrollers.
Рекомендуется
Automotive Electronics
The ADUM3151BRSZ is used in automotive systems for isolated SPI communication between ECUs and sensors. Its 3750 Vrms isolation protects low-voltage logic from high-voltage transients in hybrid and electric vehicles. The device's high data rate and low propagation delay enable real-time data exchange. It operates over a wide temperature range (-40°C to +125°C), suitable for under-hood applications. The compact SSOP-20 package fits space-constrained automotive PCBs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ADUM3151BRSZ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ADUM3151BRWZ | ADUM3152BRSZ | ADUM3153BRSZ | ISO7741DW | SI8642BB-B-IS1 |
|---|---|---|---|---|---|---|
| Package | 20-SSOP | 20-SOIC | 20-SSOP | 20-SSOP | 20-SOIC | 16-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | Skyworks Solutions |
| Isolation Voltage | 3750 Vrms | 3750 Vrms | 3750 Vrms | 3750 Vrms | 5000 Vrms | 2500 Vrms |
| Data Rate | 34 Mbps | 34 Mbps | 34 Mbps | 34 Mbps | 100 Mbps | 150 Mbps |
| CMTI | 25 kV/µs | 25 kV/µs | 25 kV/µs | 25 kV/µs | 100 kV/µs | 35 kV/µs |
| Propagation Delay | 14 ns | 14 ns | 14 ns | 14 ns | 10 ns | 13 ns |
| Supply Voltage | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 2.25 V to 5.5 V | 2.5 V to 5.5 V |
| Channel Configuration | 3 forward, 4 reverse | 3 forward, 4 reverse | 4 forward, 3 reverse | 5 forward, 2 reverse | 4 forward, 3 reverse | 4 forward, 2 reverse |
Ключевые отличия
- Optimized for SPI with 7 channels (против ISO7741DW)
- High CMTI of 25 kV/µs (против SI8642BB-B-IS1)
- Low propagation delay of 14 ns (против ADUM3151BRWZ)
Заметки по проектированию
For the ADUM3151BRSZ, ensure proper PCB layout with adequate creepage and clearance distances for the 3750 Vrms isolation rating. Maintain at least 8 mm creepage between the two sides of the isolation barrier. Place bypass capacitors (0.1 µF) close to VDD1 and VDD2 pins to reduce noise. Use a solid ground plane under the device to minimize EMI.
The ADUM3151BRSZ requires a stable power supply on both sides of the isolation barrier. Use separate LDOs or isolated DC-DC converters to power VDD1 and VDD2. Ensure the supply voltage is within 3 V to 5.5 V. Decouple each supply pin with a 0.1 µF ceramic capacitor and a 10 µF bulk capacitor to handle transient currents.
Do not exceed the absolute maximum ratings, including the isolation voltage and supply voltage. Ensure the enable pin (EN) is properly driven to avoid unintended shutdown. When routing SPI signals, keep traces short and matched to minimize skew. Avoid routing high-speed signals near the isolation barrier to prevent coupling.
Информация о соответствии
RoHS compliant per distributor data. AEC-Q100 qualification not specified.