ADV7181CBCPZ 10-Bit HDTV Video Decoder | Analog Devices
Артикул: ADV7181CBCPZ ✗ Снят с производстваADV7181CBCPZ Обзор
A video decoder is an interface IC that converts legacy analog baseband video into a digital representation suitable for processing by an FPGA, SoC, frame grabber, display controller, or video capture system. This device sits between external analog connectors and digital video logic, combining analog-to-digital conversion, color decoding, filtering, and standard detection. Its position in the signal chain makes it useful for legacy video compatibility within industrial control, broadcast, surveillance, conferencing, and professional display systems.
The principal features include four 10-bit ADCs capable of sampling to 110 MHz, six analog input channels, SCART fast-blank support, internal antialias filters, and automatic handling of NTSC, PAL, and SECAM color standards. The 10-bit conversion resolution preserves fine luminance and chroma detail, while support for both composite and S-Video reduces the number of external signal-conditioning paths required in a multi-standard design.
Technically, the ADV7181CBCPZ combines analog front-end sampling with digital color demodulation and output formatting. The product description identifies conversion into digital ITU-R BT.656 format, enabling connection to digital video processors using parallel or appropriately configured serialized digital interfaces. Internal antialias filtering helps constrain out-of-band energy before decoding, while fast-blank handling supports SCART-based source equipment.
Typical applications include professional video monitoring, legacy broadcast equipment, industrial inspection, secure video systems, set-top and video-processing designs, and graphics-digitizing systems. The component is particularly appropriate when an existing PAL, NTSC, or SECAM installation must coexist with a modern digital video pipeline.
Designers should follow the manufacturer datasheet for the exact 64-pin assignments, analog input routing, digital output mapping, supply sequencing, reference requirements, exposed-pad connection, and recommended decoupling. Signal integrity and layout are especially important around analog inputs, clocking, and digital outputs, so controlled-impedance routing and a quiet return path should be planned before layout release.
This product record combines the manufacturer function description with package information, interface details, source-level selection guidance, and practical implementation considerations. It is intended to accelerate component identification, legacy-video architecture planning, and direct comparison with compatible Analog Devices decoder options.
Аналоги без доработки для ADV7181CBCPZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ADV7181CBCPZ (тот же форм-фактор и посадочное место) — отличается по Product Type, Supported Analog Standards.
ADV7181DBCPZ
✅ Прямая заменаУточнить цену
Открыть даташит →ADV7181DWBCPZ
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADV7181CBCPZ Характеристики
| Product Type | Multiformat SDTV video decoder and RGB graphics digitizer |
| ADC Resolution | 10 bit |
| Number of ADCs | 4 |
| Maximum ADC Sampling Rate | 110 MHz |
| Analog Input Channels | 6 channels |
| Supported Analog Standards | NTSC, PAL, and SECAM |
| Supported Video Inputs | Composite and S-Video |
| Digital Output Format | ITU-R BT.656 |
| SCART Fast Blank Support | Supported |
| Internal Antialias Filters | Supported |
| Корпус | 64-LFCSP-VQ, 9 mm x 9 mm |
| Тип монтажа | Surface mount |
| Статус RoHS | RoHS compliant |
Руководство по цоколевке ADV7181CBCPZ в корпусе 64-lfcsp-vq, 9 mm x 9 mm
Цоколевка для ADV7181CBCPZ (корпус 64-lfcsp-vq, 9 mm x 9 mm). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для ADV7181CBCPZ.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ADV7181CBCPZ подходит для 6 применениеs: Professional Video Monitoring, Security and Surveillance Systems, Broadcast and Studio Equipment, Industrial Machine Vision, Video Conferencing and Legacy AV, RGB Graphics Digitization.
Professional Video Monitoring
The ADV7181CBCPZ is appropriate for professional monitoring equipment that must accept PAL, NTSC, or SECAM analog sources and present them to a digital display or processing path. Its four 10-bit ADCs sample to 110 MHz, while internal antialias filters condition the analog inputs before decoding. The resulting ITU-R BT.656 output can feed an FPGA, SoC, scaler, or frame grabber. Six analog input channels also allow a multi-source front end to be consolidated around one decoder. Engineering should preserve controlled-impedance routing around analog inputs and digital outputs and provide the supply bypassing and clocking specified by the manufacturer.
Рекомендуется
Security and Surveillance Systems
The ADV7181CBCPZ can serve as the legacy-video ingress stage in a surveillance system combining older cameras with newer digital recorders. PAL and NTSC decoding, 10-bit ADC resolution, and digital ITU-R BT.656 output create a defined transition between composite camera signals and digital pipeline processing. Six analog input channels are useful where several cameras share a multiplexing architecture. The design must account for isolation, surge protection, grounding, and electromagnetic compatibility outside the IC. For an industrial installation, verify the device's operating-temperature specification and any required qualification before releasing the design for outdoor or long-life deployments.
Рекомендуется
Broadcast and Studio Equipment
The ADV7181CBCPZ fits legacy broadcast and studio equipment that must ingest composite or S-Video from regional standards while transferring video into digital processing logic. Automatic support for PAL, NTSC, and SECAM reduces the need for separate decoder paths, and SCART fast-blank support assists compatible professional source equipment. The four 10-bit ADCs and internal antialias filters support signal acquisition before ITU-R BT.656 formatting. Production designs should validate supported input bandwidth, synchronization behavior, and output timing against the actual source format. Layout should keep sensitive analog traces short and route digital clock and output signals away from the analog input section.
Рекомендуется
Industrial Machine Vision
The ADV7181CBCPZ can bridge legacy analog camera or inspection-video signals into a digital machine-vision controller. Its 10-bit conversion resolution preserves more tonal detail than an 8-bit interface, while the maximum 110 MHz ADC sampling capability supports demanding analog-video acquisition paths. Composite and S-Video inputs offer flexibility when factory equipment uses different connector conventions. The ITU-R BT.656 output can be processed by an FPGA or embedded controller for inspection, measurement, or recording. Industrial implementations should assess camera noise, synchronization, analog filtering, ESD protection, and operating temperature independently, since those system requirements are not defined solely by the decoder IC.
Рекомендуется
Video Conferencing and Legacy AV
The ADV7181CBCPZ is useful in legacy audiovisual and conferencing systems that still receive PAL or NTSC composite video but require a digital interface to an FPGA or SoC. The integrated decoder avoids implementing separate analog-to-digital conversion, standard detection, filtering, and digital formatting stages. S-Video support permits direct use of separate luma and chroma sources when the source equipment provides them, while composite support covers general-purpose installations. SCART fast-blank handling can assist compatible equipment. The system integrator should confirm unsupported video modes, synchronization requirements, and timing behavior before using the ITU-R BT.656 output as the sole basis for product interchangeability.
Рекомендуется
RGB Graphics Digitization
The ADV7181CBCPZ also supports RGB graphics digitization alongside its television-decoding functions. This makes it applicable to equipment that captures legacy graphics or video sources and transfers them into a digital processing environment. Six analog input channels provide flexibility for multiplexed analog architectures, while the 10-bit ADCs and internal antialias filters support precise acquisition of the source signals. The digital ITU-R BT.656 interface provides a standardized handoff to downstream logic. Designers should define the intended RGB timing and synchronization scheme in the product requirements, then confirm every timing, impedance, and supported-mode condition against the manufacturer data before committing the FPGA or ASIC interface.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ADV7181CBCPZ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ADV7181DBCPZ | ADV7181DWBCPZ |
|---|---|---|---|
| Package | 64-LFCSP-VQ (9x9) | 64-LFCSP-VQ (9x9) | 64-LFCSP-VQ (9x9) |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Product Type | 10-bit multiformat SDTV video decoder and RGB graphics digitizer | Video decoder IC | RGB video decoder IC |
Ключевые отличия
- Broader explicitly documented conversion function (против ADV7181DBCPZ)
- Four high-speed 10-bit conversion channels (против ADV7181DWBCPZ)
- Six-channel analog input integration (против ADV7181DBCPZ)
- Integrated multistandard decoding and SCART support (против ADV7181DWBCPZ)
Заметки по проектированию
Place the analog input and decoupling networks directly at the associated ADV7181CBCPZ pins. Keep high-speed digital outputs and clock traces away from the analog inputs, use a continuous ground reference beneath the device, and connect the exposed pad according to the manufacturer package and thermal guidance. Treat the 64-LFCSP-VQ land pattern and exposed-pad connection as a single controlled PCB feature rather than treating the pad as optional.
Design the digital video path for the required ITU-R BT.656 timing and impedance. Route clocks and parallel data through controlled-impedance interconnects, minimize stub effects, and provide continuous return paths beneath the digital outputs. Since the decoder combines sensitive analog sampling with high-speed digital output, separate analog and digital return-current paths where the reference design permits and avoid routing video outputs across the analog input region.
Do not treat a matching 64-LFCSP-VQ body as proof that ADV7181DBCPZ or ADV7181DWBCPZ is an unconditional pin-for-pin replacement. Verify every pin, exposed-pad connection, supply rail, clock source, supported video mode, register behavior, and initialization sequence against the manufacturer documentation. Also confirm whether the system needs PAL, NTSC, SECAM, S-Video, composite, SCART fast blank, or RGB graphics digitizing before selecting the exact decoder.
Keep the analog source path away from switching regulators, high-current digital return paths, and fast clock sources. Use the shortest practical input routing, maintain consistent return references, and place any required filtering close to the source or input pins. Validate conducted and radiated emissions at the completed product level because decoder clocking and digital outputs can couple into analog video paths even when the IC itself is correctly decoupled.
Информация о соответствии
The component listing identifies the device as RoHS compliant. Other environmental, automotive, halogen-free, and conflict-minerals declarations are not established in the available records.