AK4181A - 4-Wire Touch Screen Controller, 12-bit SAR ADC | AKM
Артикул: AK4181A ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $2.85 | $2,85 |
| 10 | $2.42 | $24,20 |
| 100 | $1.95 | $195,00 |
| 500 | $1.62 | $810,00 |
| 1.000 | $1.38 | $1.380,00 |
AK4181A Обзор
A touch screen controller is a mixed-signal data-acquisition IC that bridges a 4-wire resistive touch panel and an embedded host MCU. The AK4181A sits in the broader signal-chain hierarchy as: touch-screen controller -> resistive-touch digitizer -> data-acquisition IC -> analog front-end -> semiconductor. By handling the analog measurement locally and presenting digital results to the host, the part removes analog switching and biasing complexity from the host firmware, an essential role in any handheld, HMI, or industrial-control system using legacy resistive panels.
Key features include pen-pressure measurement (Z-axis), an on-chip thermal sensor for system-temperature monitoring, two auxiliary analog input channels for general-purpose ADC use, direct battery-voltage measurement, an on-chip 2.5 V voltage reference, and a 12-bit SAR ADC with integrated sample-and-hold. The low-power architecture supports battery-powered handheld designs, while the direct-battery-measurement channel allows the host to monitor its own supply without extra external dividers.
Typical applications include resistive-touch human-machine interfaces (HMIs), handheld data terminals, industrial control panels, point-of-sale (POS) terminals, consumer electronics with resistive touch, and portable instrumentation. The auxiliary ADC inputs and on-die temperature sensor make the AK4181A useful even in systems that do not require touch input.
Design consideration: the 4-wire resistive interface requires proper PCB routing to keep the X/Y drive signals away from noisy digital traces, and the SAR converter's 125 kHz maximum sampling rate limits touch-report rates to roughly a few hundred Hz. Designers should also account for the part's TSSOP thermal envelope and ESD handling at the panel connector.
This page synthesizes distributor pricing, drop-in alternatives, application examples, and practical design notes not found in the manufacturer datasheet alone - giving engineers a one-stop reference for evaluating the AK4181A in new designs and as a replacement candidate in legacy 4-wire touch systems.
Аналоги без доработки для AK4181A — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с AK4181A (тот же форм-фактор и посадочное место) — отличается по Direct Battery Measurement, Package, RoHS Status.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
AK4181
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ADS7843
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
TSC2046
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADS7845
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AD7873ARQZ
✅ Прямая замена✓ В наличии
$5.49 / шт.
Открыть даташит →AK4181A Максимальные параметры и электрические характеристики
| Функция | 4-wire resistive touch screen controller |
| ADC Architecture | 12-bit SAR with sample-and-hold |
| Maximum Sampling Frequency | 125 kHz |
| Touch Panel Interface | 4-wire resistive |
| Pen Pressure (Z-axis) Measurement | Yes |
| On-Chip Voltage Reference | 2.5 V |
| On-Chip Thermal Sensor | Yes |
| Auxiliary Analog Inputs | 2 channels |
| Direct Battery Measurement | Yes |
| Корпус | TSSOP |
| Тип монтажа | Surface Mount |
| Статус RoHS | unknown |
Руководство по цоколевке AK4181A в корпусе tssop
Цоколевка для AK4181A (корпус tssop). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для AK4181A.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
AK4181A подходит для 6 применениеs: Industrial HMI with 4-Wire Resistive Touch, Handheld Data Terminal / Portable Instrumentation, Point-of-Sale (POS) Terminal with Signature Capture, Consumer Electronics with Resistive Touch, Automotive Aftermarket Infotainment / Climate-Control Panels, Medical Monitoring Device Touch UI.
Industrial HMI with 4-Wire Resistive Touch
The AK4181A's 12-bit SAR ADC at 125 kHz is well-matched to factory-floor HMIs that still rely on legacy 4-wire resistive panels because they tolerate gloved hands, water spray, and cost-sensitive BOMs. The IC converts the X/Y plate voltages into 12-bit coordinates via two successive conversions and reports the Z-axis pen-pressure reading for signature-capture or stylus workflows common in machine-operator terminals. Its on-chip thermal sensor also feeds panel-temperature compensation into the host MCU, which improves touch accuracy in environments that swing from -20C to +70C. Compared with a capacitive-only solution, the AK4181A preserves a known firmware interface and avoids the cost of a projected-capacitive panel.
Рекомендуется
Handheld Data Terminal / Portable Instrumentation
Battery-powered handheld terminals benefit from the AK4181A's low-power SAR architecture and its direct battery-voltage measurement channel. The on-chip 2.5 V reference lets the host measure its own supply without adding external resistor dividers, simplifying the analog BOM. The 125 kHz maximum sampling rate delivers smooth stylus tracking on signature-capture workflows used in field-service, medical, and logistics devices. Two auxiliary analog inputs can monitor external sensors (e.g. a temperature probe or a current-sense amplifier), reducing part count versus an architecture that needs a separate general-purpose ADC.
Рекомендуется
Point-of-Sale (POS) Terminal with Signature Capture
POS terminals in retail and banking still depend on 4-wire resistive panels because they accept pen-based signature capture, which the AK4181A supports natively via its pen-pressure (Z-axis) measurement. The 12-bit resolution is more than enough to capture legible signatures with sub-millimeter coordinate precision, while the 125 kHz sampling rate keeps the on-screen ink trail responsive. The on-chip temperature sensor provides panel-drift compensation that improves touch accuracy in warm retail environments, and the TSSOP package footprint keeps the analog island compact behind the display connector.
Рекомендуется
Consumer Electronics with Resistive Touch
Cost-sensitive consumer products such as e-readers, GPS handhelds, portable DVD players, and older-generation smart-home control panels still use 4-wire resistive touch because the panel cost is roughly one-third of an equivalent projected-capacitive stack. The AK4181A's integrated SAR ADC and on-chip reference remove the analog-switch network that an MCU would otherwise need, lowering BOM cost and freeing up GPIO. Its auxiliary ADC inputs can be repurposed as general-purpose ADC channels for buttons, battery monitoring, or external thermistors, increasing the value of every PCB square millimeter.
Рекомендуется
Automotive Aftermarket Infotainment / Climate-Control Panels
Aftermarket automotive head units, climate-control panels, and rear-seat entertainment modules continue to use 4-wire resistive touch because it survives wide temperature ranges and gloved-finger operation better than capacitive alternatives. The AK4181A's on-chip thermal sensor plus pen-pressure measurement support stylus-based input for navigation. Engineers planning an automotive design should note that the part is not AEC-Q100 qualified - confirm with AKM for automotive-grade material or select an automotive-qualified alternative such as TI's automotive-graded ADS7843-Q1 variant.
Рекомендуется
Medical Monitoring Device Touch UI
Bedside patient monitors, infusion pumps, and diagnostic handhelds often pair a 4-wire resistive panel with a dedicated touch controller because medical housings need an easy-to-clean, glove-compatible surface. The AK4181A's 12-bit SAR delivers the coordinate precision required for accurate selection of dosage parameters, while the two auxiliary analog inputs can monitor backup sensors or a battery-management IC voltage rail. The on-chip temperature sensor simplifies the thermal compensation routine, which keeps touch accuracy stable during long patient-monitoring sessions where panel temperature drifts.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для AK4181A — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | AK4181 | ADS7843 | TSC2046 | ADS7845 | AD7873 |
|---|---|---|---|---|---|---|
| Brand | Asahi Kasei Microdevices (AKM) | Asahi Kasei Microdevices | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices |
| Package | TSSOP | TSSOP - same | TSSOP-16 - same | TSSOP-16 - same | TSSOP-16 - same | TSSOP-16 - same |
| Touch Panel Type | 4-wire resistive | 4-wire resistive | 4-wire resistive | 4-wire resistive | 5-wire resistive | 4-wire resistive |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
| Max Sampling Frequency | 125 kHz | 125 kHz | 125 kHz | 125 kHz | 125 kHz | 125 kHz |
| Pen-Pressure (Z-axis) Measurement | Yes | Yes | Yes | Yes | Yes | Yes |
| On-Chip Temperature Sensor | Yes | Yes | No | No | No | No |
| Auxiliary Analog Inputs | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 0 channels |
Ключевые отличия
- Built-in on-chip temperature sensor (против ADS7843)
- Two auxiliary analog inputs + direct battery measurement (против AD7873)
- AKM-native firmware ecosystem (против TSC2046)
Заметки по проектированию
Route the X+, X-, Y+, Y- touch-panel traces as a tight matched quad on the same PCB layer, with ground guarding on both sides. The 12-bit SAR converter's 125 kHz sampling rate means any imbalance in trace capacitance or resistance will translate directly into a touch-coordinate offset - so keep the four traces the same length (within 5 mm) and avoid vias on the high-impedance Y- axis trace.
Decouple VDD with a 100 nF ceramic capacitor placed within 3 mm of the supply pin, plus a 10 uF bulk capacitor on the same rail. Because the AK4181A uses an internal 2.5 V reference that is shared with the auxiliary ADC channels, noisy VDD will couple into the auxiliary measurements and degrade battery-monitoring accuracy. A ferrite bead between the AK4181A supply and a noisy digital rail is recommended when the part shares a board with a switching DC-DC converter.
Do not assume that every 4-wire resistive touch controller uses the same SPI mode. The AK4181A may differ from the TI ADS7843 / TSC2046 in CPOL/CPHA timing, and swapping parts without re-validating the host driver can produce inverted coordinate readings or stuck-low touch flags. Always re-run the panel calibration routine after a touch-controller swap, because the internal reference and switch-on-resistance differ slightly between AKM and TI parts.
Информация о соответствии
Compliance values not present in verified web data; set to unknown. The part is not AEC-Q100 qualified per industry listings.
