AM2632-Q1 - Automotive Dual-Core Cortex-R5F MCU | TI
Артикул: AM2632-Q1 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $22.5 | $22,50 |
| 10 | $20.75 | $207,50 |
| 100 | $18.9 | $1.890,00 |
| 500 | $16.5 | $8.250,00 |
| 1.000 | $15 | $15.000,00 |
AM2632-Q1 Обзор
A microcontroller (MCU) is a compact integrated circuit that integrates a processor core, memory, and programmable input/output peripherals on a single chip, used to control embedded systems. In the hierarchy of processing devices, MCUs sit above simple logic ICs but below application processors, with real-time MCUs like the AM2632-Q1 targeting deterministic control loops in automotive and industrial systems.
Key features include dual R5F cores at 400 MHz, 256 KB TCM, AEC-Q100 automotive qualification, integrated industrial protocols, hardware encryption, real-time control with PRU-ICSS, and support for functional safety lockstep modes. The device is built on the Arm Cortex-R5F real-time core with a 32-bit architecture, offering deterministic response and low latency. The AM263x family features pin-to-pin compatibility across devices with up to four cores, enabling scalability. The PRU-ICSS subsystem provides integrated industrial protocols such as EtherCAT, Profinet, and Ethernet, critical for factory automation.
Typical applications include automotive motor control, battery management systems, industrial servo drives, robotics, power converters, and functional safety systems. The wide availability of peripherals and security features makes it a versatile choice for safety-critical designs. In addition, the device's hardware encryption capabilities (AES/DES/SHA/MD5) support secure communication and firmware updates, addressing cybersecurity requirements in modern vehicles. The 324-NFBGA package offers a compact footprint while providing ample I/O for complex control systems.
Designers should ensure adequate decoupling of the 1.2V core power supply and 3.3V I/O supplies with low-ESR capacitors, and carefully manage thermal dissipation in high-frequency operation. The device is designed to operate in harsh automotive environments, with an operating temperature range that should be verified against the datasheet. When using the AM2632-Q1 in safety-critical systems, consider enabling the lockstep mode on the R5F cores to achieve higher diagnostic coverage, which is essential for ISO 26262 compliance.
Аналоги без доработки для AM2632-Q1 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с AM2632-Q1 (тот же форм-фактор и посадочное место) — отличается по Number of Cores, Series, Core Architecture, Package / Case, Tightly Coupled Memory (TCM).
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
AM2632
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AM2634-Q1
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →AM2634
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AM2631-Q1
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AM2631
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AM2632-Q1 Максимальные параметры и электрические характеристики
| Series | Sitara AM263x |
| Core Processor | ARM Cortex-R5F |
| Core Architecture | 32-bit |
| Number of Cores | 2 (dual-core) |
| Max Clock Speed | 400 MHz |
| Tightly Coupled Memory (TCM) | 256 KB (256K x 8) |
| Корпус / Типоразмер | 324-NFBGA (15x15) |
| Тип монтажа | Surface Mount |
| I/O Interfaces | CAN, EtherCAT, Ethernet, SPI |
| Industrial Protocols | EtherCAT, Profinet |
| Hardware Encryption | AES, DES, SHA, MD5 |
| Qualification | AEC-Q100 (automotive) |
Руководство по цоколевке AM2632-Q1 в корпусе 324-nfbga (15x15)
Цоколевка для AM2632-Q1 (корпус 324-nfbga (15x15)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для AM2632-Q1.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
AM2632-Q1 подходит для 6 применениеs: Automotive Motor Control, Battery Management System (BMS), Industrial Servo Drives, Robotics, Power Converters, Functional Safety Systems.
Automotive Motor Control
The AM2632-Q1 is ideal for automotive motor control such as traction inverters and electric power steering. Its dual-core R5F at 400 MHz ensures deterministic real-time current and torque control loops. The integrated hardware PWM units and high-resolution timers enable precise switching frequency generation. With AEC-Q100 qualification, it meets automotive reliability requirements. The device supports encoder interfaces and resolver feedback. Its 256 KB TCM provides fast data access for control algorithms, reducing latency. Unlike general-purpose MCUs, the AM2632-Q1's PRU-ICSS can execute time-critical tasks without CPU intervention, improving system efficiency and safety.
Рекомендуется
Battery Management System (BMS)
In battery management systems, the AM2632-Q1 manages cell monitoring, balancing, and protection. Its dual-core architecture allows one core to handle state-of-charge estimation while the other runs safety diagnostics. The 400 MHz clock speed ensures rapid sampling of voltage and temperature sensors. The device's hardware encryption (AES/DES/SHA/MD5) secures communication with battery controllers. AEC-Q100 qualification ensures reliable operation in harsh automotive environments. The 324-NFBGA package supports a compact PCB layout, making it suitable for space-constrained battery pack designs. A typical configuration includes isolated CAN interfaces for battery management communication.
Рекомендуется
Industrial Servo Drives
The AM2632-Q1 is well-suited for industrial servo drives in factory automation. Its dual-core Cortex-R5F at 400 MHz provides the computational power for field-oriented control (FOC) of PMSM motors. The PRU-ICSS subsystem enables integrated EtherCAT and Profinet, eliminating the need for external communication ICs. This reduces BOM cost and simplifies design. The 256 KB TCM ensures fast data storage for real-time feedback loops. The device's thermal performance in the 324-NFBGA package allows operation in enclosed industrial cabinets. With hardware encryption, it also supports secure firmware updates and IP protection.
Рекомендуется
Robotics
Robotics applications, including collaborative robots and automated guided vehicles, benefit from the AM2632-Q1's real-time processing capabilities. The dual-core architecture enables simultaneous execution of motion control and sensor fusion algorithms. At 400 MHz, the MCU handles high-frequency sensor data, such as encoders and IMUs, with minimal latency. The PRU-ICSS supports additional industrial Ethernet protocols, enhancing connectivity. Its AEC-Q100 qualification makes it suitable for robotics used in automotive manufacturing. The 324-NFBGA package provides sufficient I/O for actuators and feedback devices. The device's reliability ensures continuous operation in demanding environments.
Рекомендуется
Power Converters
The AM2632-Q1 is an excellent choice for next-generation power converters, including DC-DC converters and on-board chargers. Its dual-core R5F at 400 MHz enables high-frequency digital compensation loops, improving transient response. The integrated comparators and high-resolution PWM modules provide precise switching control. The device can execute complex power management algorithms without external DSPs. Its low-latency TCM supports fast interrupt handling for fault detection. With AEC-Q100 qualification, it meets automotive power requirements. The package's thermal characteristics allow operation in high-temperature environments, critical for power electronics.
Рекомендуется
Functional Safety Systems
The AM2632-Q1 supports functional safety applications by allowing the dual R5F cores to operate in lockstep mode. This redundancy enables fault detection and safe shutdown in safety-critical systems such as steering and braking. According to the datasheet, the R5F subsystem can be programmed for lockstep or dual-core mode. This flexibility allows engineers to balance performance and safety. With AEC-Q100 qualification, the MCU meets ISO 26262 requirements for automotive safety integrity. Its hardware accelerators enhance diagnostic coverage. The 324-NFBGA package facilitates a certified PCB layout with proper safety monitoring circuits.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для AM2632-Q1 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | AM2632 | AM2634-Q1 | AM2631-Q1 | AM2634 |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 324-NFBGA (15x15) | 324-NFBGA (15x15) - same | 324-NFBGA (15x15) - same | 324-NFBGA (15x15) - same | 324-NFBGA (15x15) - same |
| Core Type | ARM Cortex-R5F | ARM Cortex-R5F | ARM Cortex-R5F | ARM Cortex-R5F | ARM Cortex-R5F |
| Number of Cores | 2 (dual-core) | 2 (dual-core) | 4 (quad-core) | 1 (single-core) | 4 (quad-core) |
| Max Clock Speed | 400 MHz | 400 MHz | 400 MHz | 400 MHz | 400 MHz |
| Automotive Qualified | Yes (AEC-Q100) | No | Yes (AEC-Q100) | Yes (AEC-Q100) | No |
| Integrated Industrial Protocols | EtherCAT, Profinet, Ethernet | EtherCAT, Profinet, Ethernet | EtherCAT, Profinet, Ethernet | EtherCAT, Profinet, Ethernet | EtherCAT, Profinet, Ethernet |
Ключевые отличия
- Automotive qualification (против AM2632)
- Dual-core processing (против AM2631-Q1)
- Pin-to-pin compatible with AM2634-Q1 (против AM2634-Q1)
Заметки по проектированию
Decouple the 1.2V core supply and 3.3V I/O supplies with 0.1uF and 1uF ceramic capacitors placed close to the ball pads. Use a dedicated power plane to minimize impedance. The device requires a stable supply with low ripple; consider ferrite beads for noise isolation.
The AM2632-Q1 in a 324-NFBGA package dissipates heat through the PCB. Use at least 8 vias to a ground plane under the center ball area, and provide a solid copper pour on the bottom layer for heat spreading. In high-current designs, consider an airflow path to maintain junction temperature below 125C.
Place the oscillator crystals and clock circuits close to the device, and route the high-speed DDR or QSPI traces with controlled impedance. Keep the real-time control signal paths short and avoid crossing power planes. Use separate ground planes for analog and digital domains to reduce noise.
Информация о соответствии
AEC-Q100 qualified per Q1 suffix. RoHS compliant per TI product page. REACH and halogen-free status not explicitly mentioned in verified data.
