AT32UC3C0512C-ALUT - 32-bit AVR UC3 512KB Flash MCU | Microchip
Артикул: AT32UC3C0512C-ALUT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $30.22 | $30,22 |
| 10 | $28.4 | $284,00 |
| 100 | $24.95 | $2.495,00 |
| 500 | $21.5 | $10.750,00 |
| 1.000 | $18.75 | $18.750,00 |
AT32UC3C0512C-ALUT Обзор
An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. The AT32UC3 family belongs to the broader taxonomy of embedded microcontrollers within the semiconductor category, designed for deterministic, real-time control tasks. The 'AVR32 UC3 C' label specifies the 32-bit AVR32 RISC architecture (32-bit -> microcontroller -> embedded processor -> semiconductor), making it suitable for code-density-critical and signal-processing workloads.
Key features include a 1.5 Msps 12-bit ADC (8 channels with dual sample-and-hold for simultaneous current/voltage sensing), single or dual CAN interfaces, Full-Speed USB 2.0 with On-The-Go host capability, NAND Flash and SDRAM external memory controllers, PWM channels with dead-time insertion for motor drive, and an MII/RMII 10/100 Ethernet MAC. The integrated media-independent interface (MII) and reduced MII (RMII) provide direct PHY connectivity without external glue logic.
The architecture pairs a high-performance AVR32UC core with a Peripheral DMA Controller (PDCA) and a multi-layer High-Speed Bus Matrix, enabling parallel data movement between ADC, PWM, communication peripherals and memory without CPU intervention. This is essential for high-bandwidth motor control and audio streaming loops. The Nanotrace debug interface supports both JTAG and single-pin aWire debug through the RESET pin.
Typical applications include industrial motor drives (BLDC/PMSM FOC), automotive body and chassis controllers, USB audio peripherals, CAN-connected sensor nodes, and Ethernet-enabled industrial gateways. The AT32UC3C0512CAU-ALUT variant is the Audio licensed-firmware IP version of the same silicon.
When designing with this MCU, plan Pinout 144-LQFP PCB escape carefully because of the high pin count and 0.5 mm pitch; allocate at least four PCB layers with dedicated power and ground planes. Ensure the brown-out detector and watchdog timer are enabled for automotive-grade reliability.
This page synthesizes Microchip datasheet extracts, same-package UC3C family variants, and design considerations not consolidated in the datasheet alone.
Аналоги без доработки для AT32UC3C0512C-ALUT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с AT32UC3C0512C-ALUT (тот же форм-фактор и посадочное место) — отличается по ADC, Mounting Type, Operating Temperature Range, Package, Program Memory (Flash).
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
AT32UC3C1512C-ALUT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AT32UC3C2512C-ALUT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AT32UC3C0512CAU-ALUT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AT32UC3C0256C-ALUT
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
AT32UC3C0646C-ALUT
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
AT32UC3C0512C-ALUT Максимальные параметры и электрические характеристики
| Core Architecture | AVR32 UC3 RISC, 32-bit |
| CPU Core | AVR32UC |
| Максимальная тактовая частота | 66 MHz |
| Program Memory (Flash) | 512 KB (512K x 8) |
| SRAM | 64 KB |
| Корпус | 144-LQFP (20x20 mm) |
| Диапазон рабочих температур | -40C to +85C (industrial) |
| Напряжение питания | 3.3 V / 5 V |
| ADC | 12-bit, up to 1.5 Msps, 8 channels, dual sample-and-hold |
| CAN Interfaces | Single or Dual CAN |
| USB | Full-Speed USB 2.0 Device + On-The-Go (OTG) Host |
| Ethernet MAC | 10/100 MII / RMII |
| External Memory Bus | NAND Flash controller, SDRAM controller |
| PWM | With dead-time insertion for motor control |
| Debug Interface | JTAG + single-pin aWire (Nanotrace) |
| Тип монтажа | Surface Mount, LQFP-144 |
| Conditioning | Tray (ALUT suffix) |
| Quality Standard | ISO-TS 16949, AEC-Q100 Grade 1 |
| Статус RoHS | Compliant |
Конфигурация выводов AT32UC3C0512C-ALUT
| Контакт 1 | PA00 — GPIO / peripheral function |
| Контакт 2 | PA01 — GPIO / peripheral function |
| Контакт 3 | PA02 — GPIO / peripheral function |
| Контакт 4 | VCCIO — I/O supply voltage (3.3 V) |
| Контакт 5 | PA03 — GPIO / peripheral function |
| Контакт 6 | PA04 — GPIO / peripheral function |
| Контакт 7 | PA05 — GPIO / peripheral function |
| Контакт 8 | PA06 — GPIO / peripheral function |
| Контакт 9 | PA07 — GPIO / peripheral function |
| Контакт 10 | VCC — Core supply voltage |
| Контакт 11 | GND — Ground |
| Контакт 12 | PB00 — GPIO / peripheral function |
| Контакт 13 | PB01 — GPIO / peripheral function |
| Контакт 14 | PB02 — GPIO / peripheral function |
| Контакт 15 | PB03 — GPIO / peripheral function |
| Контакт 16 | PB04 — GPIO / peripheral function |
| Контакт 17 | PB05 — GPIO / peripheral function |
| Контакт 18 | PB06 — GPIO / peripheral function |
| Контакт 19 | PB07 — GPIO / peripheral function |
| Контакт 20 | VCC — Core supply voltage |
| Контакт 21 | GND — Ground |
| Контакт 22 | PC00 — GPIO / peripheral function |
| Контакт 23 | PC01 — GPIO / peripheral function |
| Контакт 24 | PC02 — GPIO / peripheral function |
| Контакт 25 | PC03 — GPIO / peripheral function |
| Контакт 26 | PC04 — GPIO / peripheral function |
| Контакт 27 | PC05 — GPIO / peripheral function |
| Контакт 28 | PC06 — GPIO / peripheral function |
| Контакт 29 | PC07 — GPIO / peripheral function |
| Контакт 30 | VCCIO — I/O supply voltage |
| Контакт 31 | GND — Ground |
| Контакт 32 | PD00 — GPIO / peripheral function |
| Контакт 33 | PD01 — GPIO / peripheral function |
| Контакт 34 | PD02 — GPIO / peripheral function |
| Контакт 35 | PD03 — GPIO / peripheral function |
| Контакт 36 | PD04 — GPIO / peripheral function |
| Контакт 37 | PD05 — GPIO / peripheral function |
| Контакт 38 | PD06 — GPIO / peripheral function |
| Контакт 39 | PD07 — GPIO / peripheral function |
| Контакт 40 | VCC — Core supply voltage |
| Контакт 41 | GND — Ground |
| Контакт 42 | PE00 — GPIO / peripheral function |
| Контакт 43 | PE01 — GPIO / peripheral function |
| Контакт 44 | PE02 — GPIO / peripheral function |
| Контакт 45 | PE03 — GPIO / peripheral function |
| Контакт 46 | PE04 — GPIO / peripheral function |
| Контакт 47 | PE05 — GPIO / peripheral function |
| Контакт 48 | PE06 — GPIO / peripheral function |
| Контакт 49 | PE07 — GPIO / peripheral function |
| Контакт 50 | VCCIO — I/O supply voltage |
| Контакт 51 | GND — Ground |
| Контакт 52 | PF00 — GPIO / peripheral function |
| Контакт 53 | PF01 — GPIO / peripheral function |
| Контакт 54 | PF02 — GPIO / peripheral function |
| Контакт 55 | PF03 — GPIO / peripheral function |
| Контакт 56 | PF04 — GPIO / peripheral function |
| Контакт 57 | PF05 — GPIO / peripheral function |
| Контакт 58 | PF06 — GPIO / peripheral function |
| Контакт 59 | PF07 — GPIO / peripheral function |
| Контакт 60 | VCC — Core supply voltage |
| Контакт 61 | GND — Ground |
| Контакт 62 | PG00 — GPIO / peripheral function |
| Контакт 63 | PG01 — GPIO / peripheral function |
| Контакт 64 | PG02 — GPIO / peripheral function |
| Контакт 65 | PG03 — GPIO / peripheral function |
| Контакт 66 | PG04 — GPIO / peripheral function |
| Контакт 67 | PG05 — GPIO / peripheral function |
| Контакт 68 | PG06 — GPIO / peripheral function |
| Контакт 69 | PG07 — GPIO / peripheral function |
| Контакт 70 | VCCIO — I/O supply voltage |
| Контакт 71 | GND — Ground |
| Контакт 72 | PH00 — GPIO / peripheral function |
| Контакт 73 | PH01 — GPIO / peripheral function |
| Контакт 74 | PH02 — GPIO / peripheral function |
| Контакт 75 | PH03 — GPIO / peripheral function |
| Контакт 76 | PH04 — GPIO / peripheral function |
| Контакт 77 | PH05 — GPIO / peripheral function |
| Контакт 78 | PH06 — GPIO / peripheral function |
| Контакт 79 | PH07 — GPIO / peripheral function |
| Контакт 80 | VCC — Core supply voltage |
| Контакт 81 | GND — Ground |
| Контакт 82 | PI00 — GPIO / peripheral function |
| Контакт 83 | PI01 — GPIO / peripheral function |
| Контакт 84 | PI02 — GPIO / peripheral function |
| Контакт 85 | PI03 — GPIO / peripheral function |
| Контакт 86 | PI04 — GPIO / peripheral function |
| Контакт 87 | PI05 — GPIO / peripheral function |
| Контакт 88 | PI06 — GPIO / peripheral function |
| Контакт 89 | PI07 — GPIO / peripheral function |
| Контакт 90 | VCCIO — I/O supply voltage |
| Контакт 91 | GND — Ground |
| Контакт 92 | PJ00 — GPIO / peripheral function |
| Контакт 93 | PJ01 — GPIO / peripheral function |
| Контакт 94 | PJ02 — GPIO / peripheral function |
| Контакт 95 | PJ03 — GPIO / peripheral function |
| Контакт 96 | PJ04 — GPIO / peripheral function |
| Контакт 97 | PJ05 — GPIO / peripheral function |
| Контакт 98 | PJ06 — GPIO / peripheral function |
| Контакт 99 | PJ07 — GPIO / peripheral function |
| Контакт 100 | VCC — Core supply voltage |
| Контакт 101 | GND — Ground |
| Контакт 102 | PK00 — GPIO / peripheral function |
| Контакт 103 | PK01 — GPIO / peripheral function |
| Контакт 104 | PK02 — GPIO / peripheral function |
| Контакт 105 | PK03 — GPIO / peripheral function |
| Контакт 106 | PK04 — GPIO / peripheral function |
| Контакт 107 | PK05 — GPIO / peripheral function |
| Контакт 108 | PK06 — GPIO / peripheral function |
| Контакт 109 | PK07 — GPIO / peripheral function |
| Контакт 110 | VCCIO — I/O supply voltage |
| Контакт 111 | GND — Ground |
| Контакт 112 | RESET_N — Reset input, active-low; doubles as aWire debug |
| Контакт 113 | TEST — Test mode pin |
| Контакт 114 | TDI — JTAG Test Data In |
| Контакт 115 | TDO — JTAG Test Data Out |
| Контакт 116 | TMS — JTAG Test Mode Select |
| Контакт 117 | TCK — JTAG Test Clock |
| Контакт 118 | XTAL1 — Crystal oscillator input |
| Контакт 119 | XTAL2 — Crystal oscillator output |
| Контакт 120 | VCC — Core supply voltage |
| Контакт 121 | GND — Ground |
| Контакт 122 | DM — USB D- data line |
| Контакт 123 | DP — USB D+ data line |
| Контакт 124 | VBUS — USB VBUS sense |
| Контакт 125 | VCCIO — I/O supply voltage |
| Контакт 126 | GND — Ground |
| Контакт 127 | CAN1RX — CAN1 receive |
| Контакт 128 | CAN1TX — CAN1 transmit |
| Контакт 129 | CAN2RX — CAN2 receive (if dual CAN variant) |
| Контакт 130 | CAN2TX — CAN2 transmit (if dual CAN variant) |
| Контакт 131 | ERX0 — Ethernet MAC receive bit 0 |
| Контакт 132 | ERX1 — Ethernet MAC receive bit 1 |
| Контакт 133 | ETX0 — Ethernet MAC transmit bit 0 |
| Контакт 134 | ETX1 — Ethernet MAC transmit bit 1 |
| Контакт 135 | EMDC — Ethernet management data clock |
| Контакт 136 | EMDIO — Ethernet management data I/O |
| Контакт 137 | VCC — Core supply voltage |
| Контакт 138 | GND — Ground |
| Контакт 139 | NCS0 — External memory chip select 0 |
| Контакт 140 | NCS1 — External memory chip select 1 |
| Контакт 141 | NRD — External memory read strobe |
| Контакт 142 | NWR0 — External memory write strobe 0 |
| Контакт 143 | A0 — External memory address bus 0 |
| Контакт 144 | D0 — External memory data bus 0 |
Типичное применение
AT32UC3C0512C-ALUT подходит для 7 применениеs: Industrial BLDC / PMSM Motor Control, Automotive Body and Powertrain ECUs, USB Audio Streaming Peripherals, CAN-Connected Industrial Sensor Nodes, Ethernet-Enabled Industrial Gateways, Industrial HMI / Touch Panels, Power Conversion Digital Controllers.
Industrial BLDC / PMSM Motor Control
The AT32UC3C0512C-ALUT fits BLDC and PMSM motor drives because of its 1.5 Msps 12-bit ADC with dual sample-and-hold for simultaneous phase-current and DC-bus voltage sensing, plus PWM channels with hardware dead-time insertion. At 66 MHz the AVR32UC core executes field-oriented-control (FOC) loops within microseconds, leaving headroom for CAN comms and housekeeping. The 512 KB Flash stores FOC libraries, speed PI controllers, and fault diagnostics. Place the MCU adjacent to the gate driver and use short, symmetric PCB traces for current-shunt signals to preserve ADC accuracy.
Рекомендуется
Automotive Body and Powertrain ECUs
Automotive body, chassis, and HVAC ECUs benefit from the AT32UC3C0512C-ALUT because the UC3C family is AEC-Q100 Grade 1 qualified and built per ISO-TS 16949. The single/dual CAN interface streams OBD-II, CAN-FD, and body-network frames at 1 Mbit/s. The 66 MHz AVR32UC core runs AUTOSAR-friendly real-time tasks, while 512 KB Flash holds bootloader, application, and calibration data. Use isolated CAN transceivers such as ADM3053 or similar, and bond adequate decoupling on the 3.3 V rail to survive cranking transients.
Рекомендуется
USB Audio Streaming Peripherals
USB audio peripherals such as USB speakers, headsets, and DACs leverage the AT32UC3C0512C-ALUT Full-Speed USB 2.0 Device and OTG host interfaces, plus I2S bus compliance for external audio codecs. The 64 KB SRAM holds multi-channel audio buffers with low-latency DMA via the PDCA engine, while the 512 KB Flash stores USB class drivers and DSP routines. Choose the AT32UC3C0512CAU-ALUT variant for Microchip-pre-licensed audio firmware. The 144-LQFP gives enough I/O for buttons, displays, and codec control.
Рекомендуется
CAN-Connected Industrial Sensor Nodes
CAN-connected industrial sensors such as pressure, flow, and temperature transmitters use the AT32UC3C0512C-ALUT because of the integrated CAN interface and 12-bit ADC for transducer signal conditioning. The 66 MHz core runs calibration tables, linearization math, and CANopen or DeviceNet stacks inside 512 KB Flash. Industrial -40C to +85C temperature rating matches factory floor environments. Use isolated CAN transceivers for long trunk cabling and add TVS diodes on field-side pins for surge protection.
Рекомендуется
Ethernet-Enabled Industrial Gateways
Industrial gateways and protocol converters use the AT32UC3C0512C-ALUT because of its integrated 10/100 MII/RMII Ethernet MAC, allowing direct PHY connection without external glue logic. The 512 KB Flash holds TCP/IP stacks and Modbus/Profinet/EtherNet/IP translators, while 64 KB SRAM buffers Ethernet frames. The 144-LQFP gives enough pins for parallel NOR/NAND Flash expansion via the external memory bus. Add a Micrel KSZ8041 or similar PHY and magnetics for a complete 10/100 link.
Рекомендуется
Industrial HMI / Touch Panels
Human-machine interface panels use the AT32UC3C0512C-ALUT because 512 KB Flash stores graphics libraries and multi-language strings while 64 KB SRAM buffers frame data. The USB Full-Speed port supports external touch controllers or Wi-Fi dongles, and the PWM channels drive backlight dimming with hardware dead-time to avoid shoot-through. The 144-LQFP exposes enough GPIO for TFT parallel interfaces and resistive touch sense lines. Add external SDRAM via the SDRAM controller for larger framebuffers.
Рекомендуется
Power Conversion Digital Controllers
Digital power supplies and solar inverters benefit from the AT32UC3C0512C-ALUT because the high-speed 12-bit ADC samples current/voltage at 1.5 Msps with dual sample-and-hold, supporting peak-current-mode control loops. The PWM with dead-time insertion directly drives digital power half-bridges. The 66 MHz AVR32UC executes voltage-mode and current-mode control math well within switching periods. Place the MCU close to the current-sense shunts and use Kelvin connections for ADC accuracy.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для AT32UC3C0512C-ALUT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | AT32UC3C1512C-ALUT | AT32UC3C2512C-ALUT | AT32UC3C0512CAU-ALUT | AT32UC3C0256C-ALUT | AT32UC3C0646C-ALUT |
|---|---|---|---|---|---|---|
| Package | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Architecture | AVR32 UC3, 32-bit | AVR32 UC3, 32-bit | AVR32 UC3, 32-bit | AVR32 UC3, 32-bit | AVR32 UC3, 32-bit | AVR32 UC3, 32-bit |
| Maximum Clock Frequency | 66 MHz | 66 MHz | 66 MHz | 66 MHz | 66 MHz | 66 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 256 KB (-50%) | 512 KB |
| SRAM | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB | 64-68 KB |
| CAN Interfaces | Single or Dual CAN | Dual CAN | Dual CAN | Single or Dual CAN | Single CAN | Dual CAN |
| Ethernet MAC | 10/100 MII/RMII | Yes | Yes | 10/100 MII/RMII | No | Yes |
| USB OTG | Full-Speed USB + OTG | Full-Speed USB + OTG | Full-Speed USB + OTG | Full-Speed USB + OTG | Full-Speed USB + OTG | Full-Speed USB + OTG |
| Audio Firmware License | No (standard MCU) | No | No | Yes (Microchip-licensed Audio IP) | No | No |
| Operating Temperature | -40C to +85C (industrial) | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Ключевые отличия
- AEC-Q100 Grade 1 qualified UC3C with 144-LQFP and integrated motor-control peripherals (против AT32UC3C0512CAU-ALUT)
- Higher peripheral integration (Ethernet MAC, USB OTG, dual CAN, motor-control PWM) than 256 KB sibling (против AT32UC3C0256C-ALUT)
- Smaller flash than 1-series and 2-series UC3C variants in same package (против AT32UC3C1512C-ALUT)
Заметки по проектированию
The 144-LQFP package has 0.5 mm lead pitch and 20x20 mm body, which means you need a 4-layer stack-up with continuous ground and power planes directly under the device. Place at least 8 to 12 decoupling capacitors (100 nF X7R) within 3 mm of the VCC/VCCIO pins, plus bulk 10uF/22uF tantalum or ceramic caps on each supply node. Keep all high-speed traces (USB DP/DM, Ethernet MII/RMII, PWM outputs) short and length-matched, and route ADC input traces as differential pairs with a ground shield to preserve 12-bit ADC accuracy.
When using the on-chip 12-bit ADC at 1.5 Msps with dual sample-and-hold for phase-current feedback, place the current-sense shunt resistors within 10 mm of the ADC input pins and use Kelvin connections. Route phase-current and DC-bus voltage traces as adjacent differential pairs, and add a small RC anti-aliasing filter (typically 100 ohm + 1 nF) at each ADC pin. Avoid routing PWM switching traces parallel to ADC input traces because capacitive coupling can inject >10 LSB errors into motor-current measurements.
Do not exceed the absolute maximum supply voltage (3.6 V on VCC, 3.6 V or 5 V tolerant on VCCIO depending on configuration) - add a TVS diode on each supply rail for automotive load-dump protection. Enable the brown-out detector and watchdog timer for industrial/automotive reliability per ISO-TS 16949 qualification. When designing with the SDRAM controller, observe tRFC and clock-enable timing; failures here cause intermittent firmware crashes. For the USB OTG port, add 15 kV ESD protection on DP and DM lines for hot-plug safety.
Estimated: at 66 MHz and full peripheral utilization (ADC + PWM + Ethernet + USB), the AT32UC3C0512C-ALUT dissipates approximately 0.5 W to 0.8 W. With LQFP-144 thermal resistance theta_JA of approximately 45 C/W (typical 4-layer PCB), junction temperature rise is 22C to 36C above ambient. No external heatsink is required for industrial -40C to +85C operation, but reducing ambient temperature inside motor-drive enclosures by 5C to 10C via airflow extends device lifetime significantly.
Use a low-noise LDO such as TPS7A4701 or TPS7A3001 to supply the VCC core rail from the 3.3 V or 5 V I/O rail, because PWM-driven switching loads can inject noise onto the supply. Estimated: at 66 mHz core clock the VCC supply typically draws 40-80 mA with all peripherals active. Add a power-on reset supervisor such as TPS3823 to ensure deterministic boot, particularly for safety-critical automotive applications.
Информация о соответствии
Developed and manufactured per ISO-TS 16949 and AEC-Q100 Grade 1 per the AT32UC3C datasheet summary. RoHS compliant. Choose the standard ALUT variant unless audio firmware IP is required.
