ATMEGA164A-PU - 8-bit AVR MCU 16KB Flash 20MHz | Microchip
Артикул: ATMEGA164A-PU ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $4.26 | $4,26 |
| 10 | $3.98 | $39,80 |
| 100 | $3.65 | $365,00 |
| 500 | $3.4 | $1.700,00 |
| 1.000 | $3.15 | $3.150,00 |
ATMEGA164A-PU Обзор
An 8-bit microcontroller is an integrated circuit that combines a processor core, memory, and peripherals such as timers, UARTs, and ADCs on a single chip, forming the highest-volume tier of the embedded systems hierarchy (MCU -> embedded processor -> semiconductor). The AVR architecture executes most of its powerful instruction set in a single clock cycle, achieving throughput near one MIPS per MHz, so designers can trade clock speed directly against power consumption.
Key features of the ATMEGA164A include 32 general purpose I/O lines, 32 general purpose working registers, two USARTs, SPI and two-wire (I2C) interfaces, an 8-channel 10-bit ADC, a real-time counter, three flexible timers with compare modes and PWM, and internal calibrated oscillator. It operates from 2.5 V to 5.5 V with operating grades for industrial (-40C to +85C) temperature ranges.
Technically, the device is built on AVR enhanced RISC architecture with single-cycle execution, read-while-write Flash for self-programming, and multiple sleep modes plus power-down/power-save operation for battery designs. DebugWIRE on-chip debugging is supported through the RESET pin with a single-wire interface.
Typical applications include industrial control and automation, instrumentation, and hobby/prototyping projects where the through-hole PDIP package simplifies hand soldering, socketing, and breadboarding.
Design consideration: for maximum reliability, decouple VCC and AVCC separately and use the external crystal option when you need UART timing accuracy beyond the internal oscillator tolerance.
This page synthesizes distributor pricing, drop-in alternatives within the ATmega164A/324A/644A/1284 family, and practical design notes not found in the manufacturer datasheet.
Аналоги без доработки для ATMEGA164A-PU — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ATMEGA164A-PU (тот же форм-фактор и посадочное место) — отличается по Package, EEPROM, SRAM, Serial Interfaces, Debug Interface.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ATMEGA164PA-PU
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ATMEGA324A-PU
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ATMEGA644A-PU
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ATMEGA1284P-PU
✅ Прямая замена✓ В наличии
$6.05 / шт.
Открыть даташит →ATMEGA16-16PI
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$3.72 / шт.
Открыть даташит →ATMEGA32A-PU
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$3.85 / шт.
Открыть даташит →ATMEGA164A-PU Максимальные параметры и электрические характеристики
| Core Architecture | AVR 8-bit RISC |
| Flash Memory | 16 KB (8K x 16) In-System Programmable |
| SRAM | 1 KB |
| EEPROM | 512 bytes |
| Максимальная тактовая частота | 20 MHz |
| Supply Voltage Range | 2.5 V to 5.5 V |
| General Purpose I/O | 32 lines |
| Working Registers | 32 x 8-bit |
| Timers/Counters | 2 x 8-bit, 1 x 16-bit |
| USART Interfaces | 2 |
| ADC | 8-channel 10-bit |
| Serial Interfaces | USART x2, SPI, TWI (I2C) |
| Корпус | 40-PDIP (0.600 in, 15.24 mm) |
| Тип монтажа | Through-Hole |
| On-Chip Debug | DebugWIRE (single-wire via RESET) |
| Sleep Modes | Multiple including Power-down and Power-save |
| Статус RoHS | Compliant |
Конфигурация выводов ATMEGA164A-PU
| Контакт 1 | PB0/XCK0/T0 — Port B bit 0 / USART0 external clock / Timer0 external clock |
| Контакт 2 | PB1/T1 — Port B bit 1 / Timer1 external clock |
| Контакт 3 | PB2/AIN0/INT2 — Port B bit 2 / Analog comparator input 0 / External interrupt 2 |
| Контакт 4 | PB3/AIN1/OC0 — Port B bit 3 / Analog comparator input 1 / Timer0 output compare |
| Контакт 5 | PB4/SS — Port B bit 4 / SPI slave select |
| Контакт 6 | PB5/MOSI — Port B bit 5 / SPI master output, slave input |
| Контакт 7 | PB6/MISO — Port B bit 6 / SPI master input, slave output |
| Контакт 8 | PB7/SCK/OC0A/OC1C — Port B bit 7 / SPI clock / Timer output compare PWM |
| Контакт 9 | RESET — Reset input; also DebugWIRE interface |
| Контакт 10 | VCC — Digital supply voltage (2.5 V to 5.5 V) |
| Контакт 11 | GND — Ground |
| Контакт 12 | XTAL2 — Crystal oscillator output |
| Контакт 13 | XTAL1 — Crystal oscillator input / external clock input |
| Контакт 14 | PD0/RXD0 — Port D bit 0 / USART0 receive |
| Контакт 15 | PD1/TXD0 — Port D bit 1 / USART0 transmit |
| Контакт 16 | PD2/INT0/RXD1 — Port D bit 2 / External interrupt 0 / USART1 receive |
| Контакт 17 | PD3/INT1/TXD1 — Port D bit 3 / External interrupt 1 / USART1 transmit |
| Контакт 18 | PD4/XCK1/OC1B — Port D bit 4 / USART1 external clock / Timer1 output compare B |
| Контакт 19 | PD5/OC1A — Port D bit 5 / Timer1 output compare A (PWM) |
| Контакт 20 | PD6/ICP1 — Port D bit 6 / Timer1 input capture |
| Контакт 21 | PD7/OC2A — Port D bit 7 / Timer2 output compare A (PWM) |
| Контакт 22 | PC0/SCL — Port C bit 0 / TWI clock |
| Контакт 23 | PC1/SDA — Port C bit 1 / TWI data |
| Контакт 24 | PC2/TCK — Port C bit 2 / JTAG test clock |
| Контакт 25 | PC3/TMS — Port C bit 3 / JTAG test mode select |
| Контакт 26 | PC4/TDO — Port C bit 4 / JTAG test data output |
| Контакт 27 | PC5/TDI — Port C bit 5 / JTAG test data input |
| Контакт 28 | PC6/TOSC1 — Port C bit 6 / Timer oscillator input (32.768 kHz RTC crystal) |
| Контакт 29 | PC7/TOSC2 — Port C bit 7 / Timer oscillator output |
| Контакт 30 | AVCC — Analog supply for ADC (connect to VCC through low-pass filter) |
| Контакт 31 | GND — Ground (analog ground reference) |
| Контакт 32 | AREF — Analog reference voltage for ADC |
| Контакт 33 | PA0/ADC0 — Port A bit 0 / ADC channel 0 |
| Контакт 34 | PA1/ADC1 — Port A bit 1 / ADC channel 1 |
| Контакт 35 | PA2/ADC2 — Port A bit 2 / ADC channel 2 |
| Контакт 36 | PA3/ADC3 — Port A bit 3 / ADC channel 3 |
| Контакт 37 | PA4/ADC4 — Port A bit 4 / ADC channel 4 |
| Контакт 38 | PA5/ADC5 — Port A bit 5 / ADC channel 5 |
| Контакт 39 | PA6/ADC6 — Port A bit 6 / ADC channel 6 |
| Контакт 40 | PA7/ADC7 — Port A bit 7 / ADC channel 7 |
Типичное применение
ATMEGA164A-PU подходит для 6 применениеs: Industrial Control and Automation, Instrumentation and Measurement, Hobby, Education and Prototyping, Embedded Communication Nodes, Motor Control and PWM Actuation, Consumer Appliance Control.
Industrial Control and Automation
The ATMEGA164A-PU fits industrial control nodes because it combines a 20 MHz AVR core with dual USARTs for RS-485/Modbus links, SPI and TWI for module expansion, and a 10-bit ADC for sensor feedback - all with the industrial -40C to +85C temperature grade. In a PLC-style remote I/O board, the 32 GPIO lines directly drive relays and optocoupled inputs, while the three timers generate PWM for actuators. Running from a 5 V industrial rail (2.5-5.5 V supply range) removes the need for a separate regulator stage. The through-hole 40-PDIP package also allows socketed replacement in the field, reducing maintenance downtime in retrofit installations where soldered SMD MCUs complicate repairs.
Рекомендуется
Instrumentation and Measurement
For benchtop meters, data loggers, and sensor conditioning units, the ATMEGA164A-PU offers an 8-channel 10-bit ADC on Port A with an internal reference and AREF pin (pin 32) for external precision references, enabling multi-sensor scanning at moderate sample rates. The 16 KB Flash accommodates averaging, calibration, and linearization firmware, while 1 KB SRAM buffers sample arrays before transmission over one of the two USARTs. AVCC (pin 30) can be filtered separately from the digital rail to reduce ADC noise coupling, a common technique in the family datasheet's ADC application notes. The PDIP package eases prototyping on breadboards during instrument bring-up, and the TWI interface connects displays and EEPROM calibration stores.
Рекомендуется
Hobby, Education and Prototyping
The 40-PDIP through-hole package is the defining advantage for hobbyists, students, and repair technicians: the ATMEGA164A-PU can be inserted into a ZIF socket, hand-soldered with a basic iron, and breadboarded without adapters. Community toolchains support it directly - the MCUdude MightyCore Arduino package covers the ATmega164, giving Arduino IDE compilation and ISP bootloading. Single-unit pricing around $4.26 (as of 2026-09-16) keeps experimentation affordable, and the 2.5-5.5 V supply range tolerates simple USB or battery supplies. Educational kits favor this part because the DIP-40 footprint makes pin mapping physically visible: Port A pins 33-40, Port B pins 1-8, aiding classroom instruction on MCU architecture.
Рекомендуется
Embedded Communication Nodes
With two independent USARTs, the ATMEGA164A-PU bridges protocols natively - one port to a host or RS-232 debug console and the other to an RS-485 field bus through an external transceiver. The 20 MHz core provides roughly 20 MIPS (about 1 MIPS per MHz per the family datasheet), sufficient for software UART framing checks and CRC computation. TWI (I2C) handles RTC and EEPROM peripherals, while SPI drives Ethernet controllers or RF modules. Interrupt-driven receive buffers make efficient use of the 1 KB SRAM. Power-save sleep modes allow battery-backed gateways to wake on USART or timer events, and the picoPower ATMEGA164PA-PU variant drops in when ultra-low standby current is a requirement.
Рекомендуется
Motor Control and PWM Actuation
The ATMEGA164A-PU's three timers - two 8-bit and one 16-bit - provide multiple PWM channels with compare modes suited to DC motor speed control, servo positioning, and LED dimming. The 16-bit timer supports input capture for RPM measurement from hall or encoder signals, closing the control loop with the 10-bit ADC reading current or position feedback. At 20 MHz, PWM resolution of 8 bits runs at 78 kHz, inaudible in motor applications. Dead-time control for half-bridge drivers is implemented in firmware using complementary compare outputs. The 32 GPIO lines interface directly to gate-driver logic, and the -40C to +85C grade suits motor-mounted enclosures exposed to elevated ambient temperatures.
Рекомендуется
Consumer Appliance Control
In appliance boards - coffee machines, heaters, small pumps - the ATMEGA164A-PU delivers adequate compute (20 MHz AVR, ~20 MIPS), plenty of GPIO for buttons, LEDs, and relays, and a 10-bit ADC for NTC temperature sensing. The internal calibrated oscillator removes the crystal and its cost in non-critical timing applications, while read-while-write Flash supports in-field firmware updates through self-programming. Power-down sleep current keeps standby consumption low for always-plugged products, and the 2.5-5.5 V supply range accommodates capacitor-dropper or linear supplies common in appliance designs. The PDIP package also suits low-volume regional assembly lines without reflow equipment, and 512 B EEPROM retains user settings across power cycles.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ATMEGA164A-PU — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ATMEGA164PA-PU | ATMEGA324A-PU | ATMEGA644A-PU | ATMEGA1284P-PU | ATMEGA16-16PI |
|---|---|---|---|---|---|---|
| Package | 40-PDIP (0.600 in) | 40-PDIP (0.600 in) - same | 40-PDIP (0.600 in) - same | 40-PDIP (0.600 in) - same | 40-PDIP (0.600 in) - same | 40-PDIP (0.600 in) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 16 KB | 16 KB | 32 KB | 64 KB | 128 KB | 16 KB |
| SRAM | 1 KB | 1 KB | 2 KB | 4 KB | 16 KB | 1 KB |
| EEPROM | 512 bytes | 512 bytes | 1 KB | 2 KB | 4 KB | 512 bytes |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 16 MHz |
| Supply Voltage Range | 2.5 V to 5.5 V | 1.8 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 1.8 V to 5.5 V | 4.5 V to 5.5 V |
| Power Technology | Standard AVR (ATmega164A) | picoPower (lower sleep current) | Standard | Standard | picoPower | Legacy |
| Lifecycle Status | Active | Obsolete/replacement suggested (per DigiKey forum, Nov 2024) | Active | Active | Active | Active (legacy family) |
Ключевые отличия
- Currently active production vs obsolete picoPower sibling (против ATMEGA164PA-PU)
- 20 MHz maximum clock (против ATMEGA16-16PI)
- Cost-optimized memory tier in a pin-compatible family ladder (против ATMEGA324A-PU)
Заметки по проектированию
Decouple VCC (pin 10) and AVCC (pin 30) independently: place a 100 nF ceramic within 5 mm of each pin plus a 10 uF bulk capacitor per rail. The family datasheet recommends connecting AVCC to VCC through a low-pass filter (e.g., 10 uH inductor or 100-ohm resistor with 100 nF) when ADC accuracy matters, since digital switching noise on AVCC directly degrades the 10-bit converter's effective resolution. Keep the 5.5 V absolute maximum in mind for unregulated supplies.
For crystal reliability, mount the resonator between XTAL1 (pin 13) and XTAL2 (pin 12) within 10 mm of the device and keep crystal load capacitors' ground return short and direct to GND (pin 11). If using the 32.768 kHz RTC crystal on TOSC1/TOSC2 (pins 28-29), guard these traces from fast digital edges - the timer oscillator is sensitive to coupling. When the internal calibrated RC oscillator suffices, both crystal pins can be repurposed, freeing board area in PDIP-based designs.
Do not exceed the speed-versus-voltage curve: at 3.3 V, running 20 MHz is outside the safe operating envelope per the family datasheet; scale the clock down (approximately 13 MHz at 3.3 V). When substituting ATMEGA164PA for ATMEGA164A on existing boards, verify fuse settings - extended fuse defaults differ between revisions and can disable DebugWIRE or misconfigure brown-out detection. ISP programming requires the SPI pins (5-8) free of heavy loads; series resistors of 1-10 kohm protect shared peripherals during programming.
Информация о соответствии
RoHS compliant per DigiKey product listing. REACH, halogen-free, and conflict-minerals status not stated in provided data.
