ATMEGA324A-MU - 8-bit AVR MCU 32KB Flash 20MHz | Microchip
Артикул: ATMEGA324A-MU ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $5.04 | $5,04 |
| 10 | $4.85 | $48,50 |
| 100 | $4.54 | $454,00 |
| 500 | $4.2 | $2.100,00 |
| 1.000 | $3.9 | $3.900,00 |
ATMEGA324A-MU Обзор
A microcontroller unit (MCU) integrates a processor core, program memory, data memory, and peripherals on a single silicon die. Within the power-management and embedded-systems hierarchy, the ATmega324A sits in the general-purpose 8-bit MCU family, a class still widely chosen for cost-sensitive, low-power control tasks where a 32-bit device would add cost and complexity without benefit.
Key features include the AVR enhanced RISC architecture executing 131 powerful instructions, most in a single clock cycle, delivering throughput close to 1 MIPS per MHz. The 32KB of In-System Programmable (ISP) Flash supports read-while-write operation, allowing firmware updates while executing. The part provides 32 general-purpose I/O lines and 32 general-purpose working registers directly connected to the ALU, enabling efficient single-instruction access to two independent registers.
Technical depth: the ATmega324A is fabricated in a low-power CMOS process and belongs to the ATmega164A/324A/644A/1284 datasheet family, which shares a common peripheral set including a real-time counter, multiple timers, USART, SPI, and TWI (I2C) serial interfaces. Operating voltage coverage of 2.5V, 3.3V, and 5V systems allows a single design to serve multiple power domains, with the -MU suffix denoting the VQFN industrial-temperature tape-and-reel option.
Typical applications include industrial automation controllers, sensor and data-acquisition nodes, HVAC and building-control boards, and consumer appliances that need robust 5V-tolerant I/O with mature tooling.
Design consideration: the 44-VFQFN exposed pad should be soldered to a grounded thermal land pattern for both mechanical reliability and heat dissipation; omitting the exposed-pad connection is a common field-failure cause on QFN AVRs.
This page synthesizes verified distributor pricing, drop-in same-family alternatives, and practical design guidance not consolidated in the manufacturer datasheet.
Аналоги без доработки для ATMEGA324A-MU — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ATMEGA324A-MU (тот же форм-фактор и посадочное место) — отличается по Package, Flash Memory, EEPROM, SRAM, Peripherals.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ATMEGA324PA-MU
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$2.05 / шт.
Открыть даташит →ATMEGA324PB-MU
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$1.35 / шт.
Открыть даташит →ATMEGA164A-MU
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$3.01 / шт.
Открыть даташит →ATMEGA644A-MU
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ATMEGA1284-MUR
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$1.72 / шт.
Открыть даташит →ATMEGA324A-MU Максимальные параметры и электрические характеристики
| Core Architecture | 8-bit AVR RISC |
| Flash Memory | 32 KB ISP Flash (read-while-write) |
| EEPROM | 1 KB |
| SRAM | 2 KB |
| Максимальная тактовая частота | 20 MHz |
| General Purpose I/O Lines | 32 |
| Working Registers | 32 general purpose |
| Supply Voltage Class | 2.5 V / 3.3 V / 5 V systems |
| Корпус | 44-VFQFN Exposed Pad |
| Тип монтажа | Surface Mount |
| Temperature Range | Industrial (-40C to +85C) |
| Instructions | 131 powerful instructions, most single-cycle |
| Throughput | Up to ~1 MIPS per MHz |
| Real Time Counter | Yes |
| Статус жизненного цикла | Active |
| Packaging | Tape & Reel |
Руководство по цоколевке ATMEGA324A-MU в корпусе 44-vfqfn exposed pad
Цоколевка для ATMEGA324A-MU (корпус 44-vfqfn exposed pad). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для ATMEGA324A-MU.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ATMEGA324A-MU подходит для 6 применениеs: Industrial Automation Controllers, Sensor and Data Acquisition Nodes, Building and HVAC Control, Embedded Firmware Training and Prototyping, Consumer Appliance Control Panels, Motor Control and Power Subsystems.
Industrial Automation Controllers
The ATMEGA324A-MU fits industrial automation control nodes because it combines an industrial temperature rating (-40C to +85C), 32KB of ISP Flash with read-while-write field-updating, and 32 I/O lines for driving relays, optocouplers, and sensor inputs. Running at up to 20 MHz, the single-cycle AVR core delivers roughly 20 MIPS, sufficient for deterministic PLC-style scan loops, Modbus RTU over USART, and PID control. The 1KB EEPROM stores configuration and calibration that must survive power cycles, while the exposed-pad 44-VFQFN provides robust solder joints under vibration. Place the MCU on a 5V rail with 100nF decoupling per supply pin and isolate RS-485 lines for noisy factory-floor environments.
Рекомендуется
Sensor and Data Acquisition Nodes
In data-acquisition nodes, the ATMEGA324A-MU reads analog sensors via its ADC port (Port A) and streams data over SPI or USART. The 2KB SRAM buffers sample blocks, and 32KB Flash retains logging or DSP coefficients. The 3.3V supply class allows direct interfacing with modern MEMS sensors and 3.3V logic, while the 20 MHz maximum clock supports sample rates appropriate for slow-to-medium-speed acquisition (temperature, pressure, vibration envelope monitoring). The low-power AVR architecture permits sleep-mode sampling between conversions in battery-backed installations. Connect AVCC cleanly to the analog supply, add an RC filter on AREF, and keep analog traces away from switching signals to protect ADC accuracy in dense mixed-signal layouts.
Рекомендуется
Building and HVAC Control
HVAC and building-control boards benefit from the ATMEGA324A-MU's combination of 5V-tolerant I/O, 1KB EEPROM for setpoint storage, and a real-time counter for scheduling functions. Its 32 I/O lines drive zone valves, damper actuators, and relay banks, while dual serial interfaces handle networked thermostats and BMS gateways over RS-485 or TWI. The 20 MHz core executes control algorithms for staged heating and cooling with headroom for communications stacks. Because many building products require long service life, the industrial temperature rating and Microchip's stable long-term AVR product roadmap reduce obsolescence risk. Use the ISP Flash read-while-write feature to push firmware updates to installed units without pulling controllers from ceilings or panels.
Рекомендуется
Embedded Firmware Training and Prototyping
The ATmega324A family is a staple in engineering education and prototyping because it is fully supported by the open-source MightyCore Arduino hardware package (which covers ATmega324 and ATmega324PB) and by classic AVR ISP tooling. The 44-pin VQFN can be evaluated on breakout boards while the TQFP ATMEGA324A-AU supports breadboard-friendly DIP-style development. With 32KB Flash, students and engineers can fit substantial C/C++ applications, RTOS-lite schedulers, and peripheral drivers, while the 131-instruction single-cycle RISC core teaches efficient assembly-level thinking. The identical family pinout between ATmega164A/324A/644A/1284 lets one PCB design span four memory classes, making the platform ideal for course laboratories and rapid design iteration.
Рекомендуется
Consumer Appliance Control Panels
White-goods and appliance control panels use the ATMEGA324A-MU to read keypads, drive LED/LCD displays, and monitor motor feedback within one MCU. The 3.3V/5V supply flexibility accommodates cost-optimized linear supplies common in appliances, and the 32KB Flash holds menus, fault logs, and communication firmware for smart-appliance connectivity modules. The 44-VFQFN's exposed pad and compact footprint enable two-layer control boards that pass cost targets, while the industrial temperature range tolerates harsh kitchen and laundry environments. Designers should implement watchdog-based fault recovery and reserve EEPROM for usage statistics. The mature AVR toolchain and abundant second-source inventory make this MCU a low-risk choice for appliance manufacturers managing decade-long product lifecycles.
Рекомендуется
Motor Control and Power Subsystems
The ATMEGA324A-MU suits small motor-control boards - DC fans, pumps, and light appliance motors - where its timers generate PWM outputs and its ADC reads current-sense and back-EMF signals. At 20 MHz the core closes control loops fast enough for sensorless commutation of small BLDC motors, while 32KB Flash holds commutation tables plus communication firmware. The exposed-pad QFN dissipates heat into the PCB, supporting the higher switching frequencies used in MOSFET gate-drive schemes. Pair the MCU with gate drivers and sense resistors, filter ADC inputs at the current shunt, and disable PWM outputs during fault interrupts. For CAN-connected motor nodes, the ATmega16M1 family provides an integrated CAN controller within the same AVR ecosystem.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ATMEGA324A-MU — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ATMEGA324PA-MU | ATMEGA324PB-MU | ATMEGA164A-MU | ATMEGA644A-MU | ATMEGA1284-MU |
|---|---|---|---|---|---|---|
| Package | 44-VFQFN Exposed Pad | 44-VFQFN - same | 44-VFQFN - same | 44-VFQFN - same | 44-VFQFN - same | 44-VFQFN - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 32 KB | 32 KB | 32 KB | 16 KB | 64 KB | 128 KB |
| SRAM | 2 KB | 2 KB | 2 KB | 1 KB | 4 KB | 16 KB |
| EEPROM | 1 KB | 1 KB | 1 KB | 0.5 KB | 2 KB | 4 KB |
| General Purpose I/O | 32 | 32 | 39 | 32 | 32 | 32 |
| Max Clock Speed | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Power Feature | Low-power AVR CMOS | picoPower ultra-low power | picoPower + extra peripherals | Low-power AVR CMOS | Low-power AVR CMOS | picoPower |
Ключевые отличия
- Same memory class as P variant with mature design ecosystem (против ATMEGA324PA-MU)
- Higher I/O count available in the same footprint (против ATMEGA324PB-MU)
- Seamless memory upgrade path (против ATMEGA644A-MU)
- Cost-optimized mid-memory position (против ATMEGA1284-MU)
Заметки по проектированию
The 44-VFQFN exposed pad must be connected to a grounded copper land pattern on the PCB. Beyond thermal dissipation, the pad provides the primary mechanical anchor for QFN packages; un-soldered exposed pads are a leading cause of QFN field failures under thermal cycling and vibration. Use an array of small thermal vias (e.g., 4x4 grid of 0.3mm vias) under the pad to tie into internal ground planes. Follow the datasheet land-pattern dimensions and use a standard QFN solder stencil with ~50% coverage on the pad to prevent excessive solder voiding.
Decouple all VCC pins with 100nF ceramic capacitors placed within a few millimeters of each supply pin, plus one bulk 10uF capacitor near the IC. Connect AVCC to a filtered supply (ferrite bead plus 100nF) even if ADC is unused - the datasheet requires AVCC connection for correct operation. At 20 MHz and 5V, verify the supply rail can support peak switching current; a weak regulator or long thin power trace can cause brown-out resets during simultaneous I/O switching. Configure the on-chip brown-out detector to a level appropriate for the operating voltage class.
Respect the frequency-versus-voltage derating curves in the Microchip datasheet (document 40002070B): 20 MHz operation is only guaranteed at the higher end of the supply range, so a 3.3V design must lower the clock. Migrating firmware between family members (ATmega164A/324A/644A/1284) requires checking SRAM and EEPROM sizes in the linker map - the 164A's 1KB SRAM will silently corrupt a 2KB buffer allocation built for the 324A. Also note the ATMEGA324PB differs in peripheral mapping despite the same footprint, so register-level code needs conditional compilation.
Информация о соответствии
Compliance data not present in the provided web data; verify against the Microchip ATmega324A product page and Microchip's RoHS/REACH certificate database before volume orders.
