ATMEGA328-MMHR - 8-Bit AVR MCU 20MHz 32KB Flash | Microchip
Артикул: ATMEGA328-MMHR ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $2.94 | $2,94 |
| 10 | $2.65 | $26,50 |
| 100 | $2.31 | $231,00 |
| 500 | $2.1 | $1.050,00 |
| 1.000 | $1.92 | $1.920,00 |
| 3.000 | $1.8 | $5.400,00 |
ATMEGA328-MMHR Обзор
An 8-bit microcontroller is a single-chip processor executing instructions on 8-bit data words, sitting within the broader hierarchy of embedded processors: microcontroller -> embedded processor -> system-on-chip -> semiconductor device. AVR ATmega devices combine a Harvard-architecture RISC CPU with on-chip flash program memory, SRAM data memory, EEPROM, and rich analog/digital peripherals, allowing a complete embedded control system in one package.
Key features include the AVR RISC core executing most instructions in a single clock cycle (131 instructions, 32 general-purpose registers), up to 20 MIPS throughput, six-channel 10-bit ADC with 2x differential channels, two 8-bit timers and one 16-bit timer, USART, SPI, and 2-wire (I2C) serial interfaces, plus watchdog timer and on-chip debug capability via debugWIRE. The MMHR suffix denotes the RoHS-green QFN/MLF package supplied in tape and reel for automated assembly.
Technically, the ATMEGA328 uses an enhanced AVR core with pipelined single-cycle execution and a Harvard bus structure enabling concurrent program and data access. Self-programmable flash supports in-system programming through SPI and bootloader firmware, while 1.8V to 5.5V operation supports battery designs at reduced clock rates. Sleep modes from idle to power-down minimize average current draw.
Typical applications include embedded sensor nodes and IoT endpoints, industrial control and automation interfaces, consumer appliance controls, and the well-known Arduino UNO-class open-source platforms (the 328 family is the classic Arduino MCU).
Design consideration: place 100nF decoupling at the VCC pin and ensure the exposed die pad is soldered to a ground pour for thermal and EMI performance; keep XTAL traces short when using an external crystal.
This page synthesizes distributor data, drop-in alternatives, 28-pin QFN pinout, and practical design notes not found on the manufacturer product page.
Аналоги без доработки для ATMEGA328-MMHR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ATMEGA328-MMHR (тот же форм-фактор и посадочное место) — отличается по Package, Flash Memory, SRAM, Communication Interfaces, EEPROM.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ATMEGA328P-MMHR
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ATMEGA328P-MMH
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ATMEGA328-20MUR
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ATMEGA168PA-MU
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$1.72 / шт.
Открыть даташит →ATMEGA168PB-MU
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$1.31 / шт.
Открыть даташит →ATMEGA328-20MU
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ATMEGA328-MMHR Максимальные параметры и электрические характеристики
| Core | AVR 8-bit RISC |
| Core Size | 8-bit |
| Speed | 20 MHz |
| Flash Memory | 32 KB (16K x 16) |
| SRAM | 2 KB |
| EEPROM | 512 B |
| Supply Voltage Range | 1.8 V to 5.5 V |
| Рабочая температура | -40C to +85C |
| Number of I/O | 23 |
| ADC Channels | 6 x 10-bit |
| Timers | 2 x 8-bit, 1 x 16-bit |
| Communication Interfaces | USART, SPI, 2-Wire (I2C) |
| Корпус | 28-VQFN (4x4 mm) Exposed Pad |
| Тип монтажа | Surface Mount |
| Programming Interface | SPI ISP, debugWIRE |
| Sleep Modes | Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby |
| Статус RoHS | Compliant (Green package) |
Конфигурация выводов ATMEGA328-MMHR
| Контакт 1 | PC6 / RESET — Reset input or Port C bit 6 |
| Контакт 2 | PD0 / RXD — Port D bit 0, USART receive |
| Контакт 3 | PD1 / TXD — Port D bit 1, USART transmit |
| Контакт 4 | PD2 / INT0 — Port D bit 2, external interrupt 0 |
| Контакт 5 | PD3 / INT1 / OC2B — Port D bit 3, external interrupt 1, Timer2 output compare B |
| Контакт 6 | PD4 / T0 / XCK — Port D bit 4, Timer0 counter input, USART external clock |
| Контакт 7 | VCC — Digital supply voltage |
| Контакт 8 | GND — Ground |
| Контакт 9 | PB6 / XTAL1 / TOSC1 — Port B bit 6, crystal oscillator input 1 / Timer oscillator 1 |
| Контакт 10 | PB7 / XTAL2 / TOSC2 — Port B bit 7, crystal oscillator output 2 / Timer oscillator 2 |
| Контакт 11 | PD5 / T1 / OC0B — Port D bit 5, Timer1 counter input, Timer0 output compare B |
| Контакт 12 | PD6 / AIN0 / OC0A — Port D bit 6, analog comparator positive input, Timer0 output compare A |
| Контакт 13 | PD7 / AIN1 — Port D bit 7, analog comparator negative input |
| Контакт 14 | PB0 / ICP1 / CLK0 — Port B bit 0, Timer1 input capture, clock output |
| Контакт 15 | PB1 / OC1A — Port B bit 1, Timer1 output compare A |
| Контакт 16 | PB2 / SS / OC1B — Port B bit 2, SPI slave select, Timer1 output compare B |
| Контакт 17 | PB3 / MOSI / OC2A — Port B bit 3, SPI master output, Timer2 output compare A |
| Контакт 18 | PB4 / MISO — Port B bit 4, SPI master input |
| Контакт 19 | PB5 / SCK — Port B bit 5, SPI serial clock |
| Контакт 20 | AVCC — ADC supply voltage |
| Контакт 21 | AREF — ADC analog reference input |
| Контакт 22 | GND — Ground |
| Контакт 23 | PC0 / ADC0 — Port C bit 0, ADC input 0 |
| Контакт 24 | PC1 / ADC1 — Port C bit 1, ADC input 1 |
| Контакт 25 | PC2 / ADC2 — Port C bit 2, ADC input 2 |
| Контакт 26 | PC3 / ADC3 — Port C bit 3, ADC input 3 |
| Контакт 27 | PC4 / ADC4 / SDA — Port C bit 4, ADC input 4, I2C data |
| Контакт 28 | PC5 / ADC5 / SCL — Port C bit 5, ADC input 5, I2C clock |
Типичное применение
ATMEGA328-MMHR подходит для 6 применениеs: Embedded Sensor Nodes and IoT Endpoints, Industrial Control and Automation, Arduino-Compatible Open-Source Hardware, Consumer Appliance Controls, Battery Management and Portable Instrumentation, Hobbyist, Education, and Prototyping.
Embedded Sensor Nodes and IoT Endpoints
The ATMEGA328-MMHR fits battery-powered sensor nodes because its 1.8V-5.5V supply range and multiple sleep modes (down to power-save and power-down) let designers trade clock speed for ultra-low average current. The six-channel 10-bit ADC with differential channels digitizes analog sensors directly without an external converter, and the 2KB SRAM handles protocol stacks such as lightweight mesh or LoRaWAN-class packet framing. Wired to an RF module via SPI at up to 20 MHz, the MCU runs in active mode briefly then parks in power-down, stretching coin-cell life from days to months. The compact 4x4 mm QFN keeps the node PCB small for wearable and retrofit deployments.
Рекомендуется
Industrial Control and Automation
In factory automation the ATMEGA328-MMHR provides reliable 20 MIPS control of actuators, valves, and process loops within an industrial -40C to +85C envelope. The 16-bit timer supports precise PWM generation for motor and heater control, the watchdog timer recovers from transient faults, and the brown-out detector guarantees safe resets on noisy 24V-derived supplies. Its USART links to Modbus RTU gateways, while SPI and I2C connect isolated ADCs, EEPROMs, and human-machine interfaces. The exposed-pad QFN solders to a ground pour improving EMC on electrically harsh panels, and ISP flash allows field firmware updates through a bootloader without desoldering the device.
Рекомендуется
Arduino-Compatible Open-Source Hardware
The ATmega328 family is the core of the Arduino UNO ecosystem, and the ATMEGA328-MMHR is fully code-compatible with Arduino sketches and bootloaders. Designers of custom Arduino-compatible boards choose the 28-pin QFN to shrink board area versus the TQFP-32 UNO footprint while keeping full compatibility with the standard 16 MHz (or faster) build configuration. The chip accepts the standard Optiboot bootloader over its SPI ISP interface, after which sketches upload through USART. The 32KB flash accommodates substantial sketches, and the AVR instruction set matches thousands of published libraries and shields, minimizing porting effort for maker products transitioning to volume manufacturing.
Рекомендуется
Consumer Appliance Controls
Home appliances, small HVAC controllers, and kitchen devices benefit from the ATMEGA328-MMHR's combination of low cost, integrated peripherals, and RoHS-green packaging. The 10-bit ADC reads NTC temperature sensors and user potentiometers, timers generate button-scanning interrupts and buzzer tones, and the EEPROM retains user settings and calibration data across power cycles with 100k write endurance. Operating at 5V from transformer-derived supplies keeps the design simple, while the 4x4 mm QFN fits compact control PCBs behind front panels. Sleep-mode support helps products meet regional standby-power regulations, dropping controller current to microamps when the appliance idles between user interactions.
Рекомендуется
Battery Management and Portable Instrumentation
Portable instruments use the ATMEGA328-MMHR for measurement front ends: the differential ADC channels with 1x/10x/200x gain measure bridge sensors and shunt currents, while the internal 1.1V/2.56V bandgap references give absolute readings without external references. Fuel-gauge and battery-protection firmware exploits fast wake-from-power-save interrupts to service charger events within microseconds yet return to sub-microamp sleep. SPI drives OLED/graphical LCDs, and USART provides field service links. The 5.5V maximum supply tolerates a single Li-ion cell directly through an LDO, and the industrial temperature range supports outdoor meters. Self-programmable flash enables calibration coefficients and datalogging buffers updated in the field.
Рекомендуется
Hobbyist, Education, and Prototyping
Universities, maker labs, and rapid-prototyping teams standardize on ATmega328-class MCUs because the documentation, toolchain (AVR-GCC, Microchip Studio, Arduino IDE), and community resources are unmatched. The ATMEGA328-MMHR's 20 MHz rating gives 25% more throughput than UNO-spec 16 MHz designs while remaining fully compatible with existing sketches. debugWIRE single-wire debugging requires only the RESET line, letting students step through code with a one-pin connection and an inexpensive programmer. The 23 GPIOs drive servos, LEDs, and H-bridges directly, and abundant through-hole breakout adapters exist for the 28-pin QFN, enabling breadboard prototyping before a custom PCB commit.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ATMEGA328-MMHR — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ATMEGA328P-MMHR | ATMEGA328-20MUR | ATMEGA168PA-MU | ATMEGA168PB-MU |
|---|---|---|---|---|---|
| Package | 28-VQFN (4x4 mm) Exposed Pad | 28-VQFN (4x4 mm) - same | 28-VQFN (4x4 mm) - same | 28-VQFN (4x4 mm) - same | 28-VQFN (4x4 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 32 KB | 32 KB | 32 KB | 16 KB | 16 KB |
| SRAM | 2 KB | 2 KB | 2 KB | 1 KB | 1 KB |
| Max Speed | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| picoPower Technology | No | Yes | No | Yes | Yes |
| USART Count | 1 | 1 | 1 | 1 | 2 |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Ключевые отличия
- 20 MHz maximum clock versus UNO-class 16 MHz designs (против ATMEGA328-20MUR)
- Double the flash and SRAM of the 168 series (против ATMEGA168PA-MU)
- Lower production cost than the picoPower variant (против ATMEGA328P-MMHR)
Заметки по проектированию
The 28-VQFN (4x4 mm) exposed pad must be soldered to a grounded copper pour for reliable ground return, heat dissipation, and EMC. Use a 3x3 or 4x4 via array under the die pad to the internal ground plane. Place 100nF X7R ceramic decoupling capacitors within 3 mm of VCC (pin 7) and AVCC (pin 20); add 10uF bulk capacitance near the supply entry. Keep the AREF node quiet with a 100nF cap to ground when using internal references.
Clock frequency must be derated versus supply voltage: 20 MHz operation is guaranteed only at 4.5V-5.5V; at 3.3V the safe maximum is roughly 13.3 MHz and at 1.8V approximately 4 MHz per the datasheet frequency-vs-VCC curve. Designers running 16 MHz at 3.3V (common Arduino-derived practice) are within the safe boundary. Also connect AVCC to VCC through an LC or RC filter when the ADC is used in noisy switching-supply environments.
The bare ATMEGA328-MMHR ships unprogrammed - it has no bootloader, so a first-time bring-up requires an ISP programmer (SPI on PB3-PB5, pin 17-19) or a debugWIRE-capable tool on the RESET line. Do not route other signals on PC6/RESET, and ensure the RESET pull-up (10k) is present if using debugWIRE. When migrating from DIP/TQFP designs, note pin 1 remains RESET and the QFN numbering matches DIP-28 one-to-one, but the exposed pad is ground and must not float.
Информация о соответствии
Mouser listing identifies the ATMEGA328-MMHR as 'GRN' (green, RoHS-compliant, NiPdAu plating). REACH and conflict-minerals declarations must be requested from Microchip via certificate of conformance.
