ATSAMD51J20A-AF - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
Артикул: ATSAMD51J20A-AF ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $10.4 | $10,40 |
| 10 | $9.45 | $94,50 |
| 100 | $8.2 | $820,00 |
| 500 | $7.15 | $3.575,00 |
| 1.000 | $6.4 | $6.400,00 |
| 2.500 | $5.85 | $14.625,00 |
ATSAMD51J20A-AF Обзор
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals on one die. Within the broader IC taxonomy, MCUs sit under embedded processors -> microcontrollers -> ARM Cortex-M microcontrollers. The Cortex-M4F class adds DSP extensions and a hardware FPU for floating-point math, sitting between the Cortex-M3 (no FPU) and Cortex-M7 (higher performance, more memory bandwidth) tiers.
Key features include a 120 MHz core with FPU, 1 MB dual-bank Flash supporting live update, 256 KB SRAM with ECC for safety, a 12-bit 1 MSPS ADC, two 12-bit DACs, up to 51 general-purpose I/O, full-speed USB 2.0 with on-chip transceiver, CAN-FD, I2S, SD/MMC, QSPI for XIP, and SERCOM peripherals configurable as UART/SPI/I2C. An on-chip FPU accelerates sensor fusion and audio processing without offloading to a DSP.
The device is built on a low-power CMOS process with multiple power domains and an Event System that lets peripherals trigger each other without CPU intervention, enabling deterministic latency and ultra-low sleep current. The dual-panel Flash bank architecture supports in-application programming without stalling executing code, which is critical for firmware OTA update scenarios.
Typical applications include industrial sensor hubs, IoT edge nodes with secure connectivity, USB Human Interface Devices (HID), audio front-ends with on-chip DSP, motor control via PWM, and graphical user interfaces on TFT displays. The integrated USB, CAN-FD, and crypto accelerators also suit automotive body and industrial automation designs.
When designing with this part, plan PCB layout to keep the VDDCORE decoupling loop small and provide a 32.768 kHz crystal for RTC accuracy. Ensure the BOOTPROT fuse is set before production to lock debug access. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer page.
Аналоги без доработки для ATSAMD51J20A-AF — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ATSAMD51J20A-AF (тот же форм-фактор и посадочное место) — отличается по SRAM, MSL Level, Package, Communication Interfaces, Core Architecture.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ATSAME51J20A-AF
✅ Прямая замена✓ В наличии
$5.1 / шт.
Открыть даташит →ATSAMD51J19A-AFT
✅ Прямая замена✓ В наличии
$4.8 / шт.
Открыть даташит →ATSAMD51J18A-AF
✅ Прямая замена✓ В наличии
$4.5 / шт.
Открыть даташит →ATSAMD51J20A-AF Максимальные параметры и электрические характеристики
| Core | ARM Cortex-M4F with single-precision FPU |
| Maximum Clock Speed | 120 MHz |
| Program Memory (Flash) | 1 MB (1M x 8), dual-panel with ECC |
| SRAM | 256 KB with ECC |
| Корпус | 64-TQFP (10x10 mm) |
| Диапазон рабочих температур | -40 C to +125 C (extended) |
| Тип монтажа | Surface Mount |
| Number of I/O | 51 |
| Core Size | 32-Bit single core |
| USB | Full-speed USB 2.0 Device/Host with on-chip transceiver |
| Communication Interfaces | CAN-FD, I2S, SD/MMC, QSPI, SERCOM (UART/SPI/I2C) |
| Статус RoHS | Compliant |
| Уровень MSL | 3 |
| Packaging | Tray |
Руководство по цоколевке ATSAMD51J20A-AF в корпусе 64-tqfp (10x10 mm)
Цоколевка для ATSAMD51J20A-AF (корпус 64-tqfp (10x10 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для ATSAMD51J20A-AF.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ATSAMD51J20A-AF подходит для 6 применениеs: Industrial IoT Edge Gateway, USB Human Interface Device (HID), Audio Front-End with On-Chip DSP, Motor Control and BLDC Drive, TFT Display HMI Controller, CAN-FD Industrial Sensor Hub.
Industrial IoT Edge Gateway
The ATSAMD51J20A-AF is a strong fit for industrial IoT edge gateways because its 120 MHz Cortex-M4F with FPU executes TLS 1.2/1.3 handshakes in well under 500 ms, and its 1 MB dual-panel Flash stores OTA firmware images for both bank A and bank B during live update. Engineers typically route the full-speed USB to a cellular or Wi-Fi module, CAN-FD to field sensors, and the SERCOM peripherals to UART-attached modems. The hardware crypto accelerator offloads AES/SHA from the CPU. Trade-off vs an external secure element: on-chip crypto keeps BOM low but secret keys are exposed if the debug port is unlocked; set BOOTPROT and lock the debug interface before deployment.
Рекомендуется
USB Human Interface Device (HID)
The integrated full-speed USB 2.0 Device/Host controller with on-chip transceiver makes the ATSAMD51J20A-AF ideal for USB HID peripherals such as keyboards, mice, gaming controllers, and industrial input panels. The on-chip transceiver eliminates the external PHY, saving roughly $0.50 BOM and 50 mm2 of PCB area versus competing MCUs that require an external PHY. The Cortex-M4F at 120 MHz runs USB polling at the 1 kHz standard interval with comfortable headroom for HID report processing and LED animation. Pair with the Microchip ASF4 USB stack or TinyUSB for rapid development; trade-off is the device's larger 64-TQFP footprint vs 32-QFN alternatives for space-constrained HID dongles.
Рекомендуется
Audio Front-End with On-Chip DSP
The ATSAMD51J20A-AF serves audio front-ends where the Cortex-M4F DSP extensions and FPU accelerate biquad filtering, dynamic range compression, and FFT-based visualization in real time at 48 kHz sample rates. Its I2S peripheral connects directly to 24-bit audio codecs, while the 12-bit DACs can drive headphone amplifiers for low-cost preview outputs. With 256 KB of SRAM, audio engineers can buffer 30 ms of stereo at 48 kHz while still leaving headroom for application code. Trade-off: for higher-end audio paths with 96 kHz or 192 kHz streams and large reverb tails, designers should migrate to Cortex-M7 parts with 512 KB+ SRAM; the SAM D51 reaches its ceiling around 48 kHz with moderate DSP.
Рекомендуется
Motor Control and BLDC Drive
For brushless DC motor control, the ATSAMD51J20A-AF provides the TCC (Timer/Counter for Control) peripherals that generate complementary PWM with programmable dead-time insertion and hardware fault shutdown for safe inverter driving. The Cortex-M4F executes field-oriented control (FOC) loops within a typical 10-20 kHz control period using its FPU for Park/Clarke transforms. The 12-bit 1 MSPS ADC samples phase currents with comfortable timing margin, while CAN-FD links the drive to industrial controllers. Trade-off: the device lacks the high-resolution PWM (150 ps steps) found on dedicated dsPIC33 parts, so ultra-precise torque control applications should evaluate those parts instead.
Рекомендуется
TFT Display HMI Controller
The ATSAMD51J20A-AF drives small TFT displays for human-machine interface panels because its QSPI peripheral supports XIP (execute-in-place) from external Flash, allowing large bitmap assets to stay outside the 1 MB internal Flash while still being CPU-accessible at high speed. The 2D graphic acceleration through the parallel display peripheral offloads frame buffer updates, leaving CPU cycles for touch processing and UI logic. Engineers typically connect the TFT via the SMC bus and overlay widgets using LVGL or emWin libraries. Trade-off: for larger than 5-inch displays at 60 Hz refresh, the part may saturate its 128-bit Hmatrix; consider external display controllers in such cases.
Рекомендуется
CAN-FD Industrial Sensor Hub
For industrial sensor hubs aggregating CAN-FD traffic, the ATSAMD51J20A-AF combines hardware CAN-FD at up to 5 Mbit/s with USB for upstream PC connectivity, letting engineers build compact gateways between sensor networks and SCADA systems. The dual-panel Flash supports firmware update over the air or over CAN without disrupting sensor polling, and the 51 GPIO drive discrete I/O lines for legacy 24 V interfaces. Industrial temperature grade -40 C to +125 C suits factory-floor enclosures. Trade-off: for designs needing CAN-XL or Ethernet, designers must add external PHYs and migrate to higher-tier SAM RH71 or SAM E70 parts.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ATSAMD51J20A-AF — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ATSAME51J20A-AF | ATSAMD51J19A-AF | ATSAMD51J18A-AF |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) |
| Core | Cortex-M4F @ 120 MHz | Cortex-M4F @ 120 MHz | Cortex-M4F @ 120 MHz | Cortex-M4F @ 120 MHz |
| Flash | 1 MB | 1 MB | 512 KB | 256 KB |
| SRAM | 256 KB | 256 KB | 256 KB | 256 KB |
| USB | Full-speed USB 2.0 Device/Host | Full-speed USB 2.0 Device/Host | Full-speed USB 2.0 Device/Host | Full-speed USB 2.0 Device/Host |
| CAN-FD | Yes | Yes | Yes | Yes |
| GPIO | 51 | 51 | 51 | 51 |
| Operating Temperature | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C |
Ключевые отличия
- Largest Flash density in the 64-TQFP SAM D51 family (против ATSAMD51J19A-AF)
- On-chip USB 2.0 transceiver vs external PHY alternatives (против ATSAMD51J18A-AF (same family))
- Drop-in upgrade path to SAM E51 within Microchip family (против ATSAME51J20A-AF)
Заметки по проектированию
Provide a tight 4.7 uF X7R decoupling capacitor within 5 mm of the VDDCORE pin and a 100 nF high-frequency bypass right at the pin. Use a ferrite bead or LC filter between VDDIO and VDDCORE, because the SAM D51 internal LDO dissipates the VIN-VCORE difference. At 120 MHz full load, estimate (using VDDIN=3.3 V and VDDCORE=1.2 V at 50 mA total core current) roughly 0.1 W internal LDO dissipation, which a 1 square inch copper pour handles without a heatsink.
Route the 32.768 kHz crystal traces symmetrically within 5 mm of the XIN32/XOUT32 pins and guard them with a ground ring; longer traces pick up switching noise from the USB D+/D- pair and degrade RTC accuracy. Keep the USB D+/D- differential pair at 90 ohm impedance and length-matched to within 150 mil to avoid USB compliance failures at full-speed.
Set BOOTPROT to lock the bootloader region and set SECCTRL to disable external debug access before production programming. The SAM D51 ships with debug enabled by default, so failing to lock allows an attacker to read out firmware including the AES/SHA keys. Estimate the effort: this is a 30-second fuse-write step in Atmel Studio / MPLAB X that must never be skipped.
Do not power VDDCORE directly from 3.3 V - the SAM D51 expects the internal LDO to drop it to ~1.2 V. Apply power to VDDIN/VDDIO and let the internal regulator handle VDDCORE. Forgetting this step causes the part to latch up or burn out instantly. Also ensure the NRST pin is held low until all rails stabilize for at least 1 ms after VDDIO reaches 1.6 V.
Информация о соответствии
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified; for automotive applications choose ATSAME51J20A-AF or ATSAMD51J20A-AF in AEC-Q100 variant.
