ATTINY24-20MU - 20MHz AVR MCU, 2KB Flash | Microchip
Артикул: ATTINY24-20MU ✓ АктивенATTINY24-20MU Обзор
An 8-bit microcontroller is a compact embedded-processing component that combines a CPU core, program memory, data memory, and peripherals in one integrated circuit. The ATTINY24 belongs to the AVR family of reduced-instruction-set microcontrollers. Its design places emphasis on efficient instruction execution, low-power operation, deterministic peripheral behavior, and simple in-system programming, making it suitable for compact control and signal-processing systems.
Core resources include 2 KB of flash organized as 1K x 16 bits, 128 bytes of EEPROM for nonvolatile data, 128 bytes of SRAM, and 32 general-purpose working registers. The device provides 12 I/O lines, a 10-bit analog-to-digital converter, and two timers/counters with two PWM channels each. These features support embedded firmware, analog measurement, event counting, motor or light control, and simple sensor-acquisition designs.
The AVR enhanced RISC architecture executes instructions within a small number of clock cycles, while the 20 MHz operating frequency provides useful processing headroom for compact embedded applications. Peripherals include SPI communication, an 8-channel 10-bit ADC, internal interrupts, and an internal oscillator. The 20-QFN-EP package also provides an exposed thermal pad for improved heat transfer on multilayer printed circuit boards.
Typical uses include industrial sensor modules, compact motor controllers, LED lighting controllers, battery-powered instruments, small appliances, and custom automation boards. The 12 I/O pins allow external sensing and control while the ADC provides direct analog measurement. The small 4 x 4 mm package supports compact layouts, although careful via and copper-pad planning is necessary to preserve signal and thermal performance.
The exposed pad should be connected to the ground plane according to the manufacturer's land-pattern guidance. Decoupling capacitors, programming access, reset behavior, and analog-reference routing must be implemented from the device pin description. Confirm that the assembled firmware, startup behavior, peripheral assignments, and power requirements satisfy the specific application before releasing a PCB.
This page organizes the controller's memory, clock, analog, timer, package, and programming characteristics together with replacement guidance and practical design considerations. It helps engineers compare the ATTINY24-20MU with compatible AVR-family devices while focusing on the electrical, mechanical, and firmware constraints that determine whether a replacement is truly drop-in compatible.
Аналоги без доработки для ATTINY24-20MU — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ATTINY24-20MU (тот же форм-фактор и посадочное место) — отличается по EEPROM Memory, Flash Memory, PWM Channels, SRAM, Architecture.
ATTINY24A-20MU
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ATTINY44-20MU
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →ATTINY84-20MU
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →ATTINY24-20MU Максимальные параметры и электрические характеристики
| Microcontroller Type | 8-bit AVR RISC microcontroller |
| Максимальная тактовая частота | 20 MHz |
| Flash Memory | 2 KB (1K x 16 bits) |
| EEPROM Memory | 128 bytes |
| SRAM | 128 bytes |
| General-Purpose I/O Pins | 12 pins |
| General-Purpose Working Registers | 32 registers |
| ADC Resolution | 10 bits |
| ADC Channels | 8 channels |
| Timers/Counters | 2, with 8-bit and 16-bit counters |
| PWM Channels | 2 per timer/counter |
| Supply Voltage Options | 3.3 V and 5 V |
| Корпус | 20-QFN-EP, 4 x 4 mm |
| Тип монтажа | Surface mount |
| Programming Interface | In-system programmable |
| Instruction Architecture | AVR enhanced RISC |
| External Interrupts | Supported |
| Internal Interrupts | Supported |
| SPI Interface | Supported |
Руководство по цоколевке ATTINY24-20MU в корпусе 20-qfn-ep, 4 x 4 mm
Цоколевка для ATTINY24-20MU (корпус 20-qfn-ep, 4 x 4 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для ATTINY24-20MU.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ATTINY24-20MU подходит для 6 применениеs: Industrial Sensor Module, LED Lighting Controller, Battery-Powered Instrument, Compact Motor Controller, Custom Automation Controller, Low-Power Data Logger.
Industrial Sensor Module
The ATTINY24-20MU fits compact industrial sensor modules because it combines a 20 MHz AVR core, 12 I/O lines, and an 8-channel 10-bit ADC in a 4 x 4 mm 20-QFN-EP package. A typical circuit samples analog sensors, applies digital filtering, evaluates limit thresholds, and reports status through a serial link. Its 2 KB flash supports small embedded routines, while 128 bytes of SRAM provides working space for time-critical acquisition. The compact land pattern also helps reduce board area. Designers should protect analog inputs from switching-node coupling, place input and ground returns according to the package guidance, and verify that the 3.3 V or 5 V operating condition remains within the device requirements.
Рекомендуется
LED Lighting Controller
The ATTINY24-20MU is appropriate for small LED-lighting and illumination-control boards because its two timers provide PWM outputs, and its 12 I/O pins can control channels, drivers, and status indicators. The 20 MHz clock allows timing routines to be scheduled accurately, while the 2 KB flash can hold a compact control program and the 128-byte EEPROM can preserve configuration values such as brightness presets. In a typical design, the MCU drives transistor or LED-driver inputs rather than carrying load current directly. Firmware can implement fading, pulse patterns, fault detection, and current feedback. The 20-QFN-EP footprint helps when board space is limited, but exposed-pad grounding and thermal layout remain important.
Рекомендуется
Battery-Powered Instrument
The ATTINY24-20MU suits battery-powered instruments and compact portable controls where a low-power 8-bit MCU and limited board area are valuable. Its 20 MHz AVR core can service timers, button inputs, display updates, and serial communication, while the 2 KB flash and 128-byte SRAM suit tightly scoped embedded tasks. The 3.3 V and 5 V operating options allow design integration with common low-voltage systems. A practical instrument can use the 10-bit ADC for a battery or sensor reading, store calibration data in EEPROM, and sleep between user interactions. The 20-QFN-EP package requires careful thermal-pad and ground-plane layout, and firmware should avoid unnecessary peripheral activity to reduce overall energy use.
Рекомендуется
Compact Motor Controller
The ATTINY24-20MU can serve as the logic controller in a compact motor or actuator design because it provides two timers/counters, two PWM channels per timer, 12 I/O pins, and an 8-channel 10-bit ADC. The MCU can generate command signals for an external gate driver, monitor analog feedback, detect overcurrent or stall conditions, and coordinate startup timing. With 2 KB of flash, it is best suited to focused control loops rather than elaborate motion algorithms. Its 20 MHz clock supports responsive timing and PWM updates, and the 4 x 4 mm package assists compact board construction. A production design must include suitable driver stages, current protection, thermal analysis, and safe disconnect behavior.
Рекомендуется
Custom Automation Controller
The ATTINY24-20MU is well suited to a dedicated automation controller with modest control requirements and limited PCB area. Twelve I/O lines can operate relays, discrete inputs, indicators, and communication peripherals, while the 20 MHz AVR core handles deterministic state-machine logic. The 8-channel 10-bit ADC allows the controller to monitor analog process values, and the two timer/counters support periodic sampling or output timing. At 2 KB of flash and 128 bytes of SRAM, the firmware must remain compact, but that limitation can improve cost and validation efficiency for a focused machine. The surface-mount package also reduces assembly size. ESD protection, isolation, grounding, and fail-safe power behavior depend on the external circuitry.
Рекомендуется
Low-Power Data Logger
The ATTINY24-20MU can act as the control element in a small sensor logger that records selected measurements and communicates them through SPI or another serial interface. Its 10-bit ADC supports up to eight analog channels, and the 2 KB flash stores firmware while EEPROM retains configuration or counters between power cycles. A practical logger can wake periodically, sample the ADC, update stored state, and transmit a compact record. The 20 MHz controller provides enough timing flexibility for scheduled acquisition, although its limited SRAM requires a streaming approach for larger data sets. The 20-QFN-EP footprint supports compact instrumentation. Analog grounding, bypass placement, oscillator behavior, and power-cycling margins should be verified on the final PCB.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ATTINY24-20MU — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ATTINY24A-20MU | ATTINY44-20MU | ATTINY84-20MU |
|---|---|---|---|---|
| Package | 20-QFN-EP (4x4 mm) | 20-QFN-EP (4x4 mm) | 20-QFN-EP (4x4 mm) | 20-QFN-EP (4x4 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 2 KB (1K x 16 bits) | 2 KB | 4 KB | 8 KB |
| EEPROM Memory | 128 bytes | 128 bytes | 256 bytes | 512 bytes |
| SRAM | 128 bytes | 128 bytes | 256 bytes | 512 bytes |
| General-Purpose I/O Pins | 12 pins | 12 pins | 12 pins | 12 pins |
| ADC | 8-channel, 10-bit | 8-channel, 10-bit | 8-channel, 10-bit | 8-channel, 10-bit |
| Timers/Counters | 2 with 8-bit and 16-bit counters | 2 with 8-bit and 16-bit counters | 2 with 8-bit and 16-bit counters | 2 with 8-bit and 16-bit counters |
| PWM Channels | 2 per timer/counter | 2 per timer/counter | 2 per timer/counter | 2 per timer/counter |
| Programming | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
Ключевые отличия
- Compact 20 MHz AVR control with integrated analog conversion (против ATTINY84-20MU)
- Directly comparable surface-mount family positioning (против ATTINY44-20MU)
- Small exposed-pad package for space-constrained designs (против ATTINY24-20PU)
Заметки по проектированию
Treat the exposed pad as a functional thermal and electrical feature rather than an optional copper area. Follow the manufacturer land-pattern and exposed-pad connection instructions when assigning the PCB footprint. Provide a continuous ground connection to the pad through the package's designated thermal-via arrangement, but retain solder mask and assembly clearances defined by the recommended footprint. This is especially important because the controller can dissipate power during sustained high-clock operation.
Place the required bypass capacitor at the supply pins using the shortest possible current path, with its ground termination connected into the nearby ground plane. Keep the 20 MHz clock and programming traces away from analog inputs and switching-power routing. Because the device offers only 12 I/O lines, assign multiplexing functions early in firmware and verify that every alternate-function pin remains available for boot programming or recovery.
Do not substitute a 20-pin through-hole ATTINY24 package for the ATTINY24-20MU on an existing board: their physical footprints and solder requirements differ. Also avoid treating the family-level pin diagram as sufficient for the exact surface-mount ordering code. Verify the exposed-pad connection, pin-one orientation, programming signals, reset circuit, supply decoupling, and analog-reference arrangement against the package-specific manufacturer documentation before fabrication.
Keep analog sensor inputs short and route them away from PWM outputs, clock signals, and exposed-pad currents. If the 10-bit ADC is used for precision measurements, provide a quiet reference arrangement and consistent return paths. For SPI communication, use short traces with a continuous ground reference, and review signal levels and rise times rather than assuming that nominal logic voltage guarantees robust communication with every peripheral.
Информация о соответствии
Compliance status was not established by the cited product listings. Confirm RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals declarations using the current manufacturer product documentation before procurement release.