ATXMEGA32C3-AU - 32MHz 32KB Flash MCU | Microchip | TQFP-64
Артикул: ATXMEGA32C3-AU ✓ АктивенATXMEGA32C3-AU Обзор
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, peripherals, and interface circuitry on one device. Within the embedded-control hierarchy, the ATXMEGA32C3 belongs to the AVR 8/16-bit MCU family and uses the Harvard-style AVR architecture, which separates program-memory access from the data-memory path. This structure supports efficient instruction execution in applications involving sensors, communication interfaces, motor control, and local human-machine interaction.
The ATXMEGA32C3-AU combines 32 KB of in-system programmable Flash with read-while-write capability, 2 KB of EEPROM, and 4 KB of SRAM. Its four-channel event system can coordinate timing-sensitive tasks without excessive interrupt servicing. The device also provides a 12-bit ADC, multiple timer/counter resources, and serial interfaces suitable for industrial, consumer, and communication-oriented embedded products. The industrial-temperature ordering designation identifies it for extended-temperature equipment applications.
Its 32 MHz operating speed provides useful performance for protocol handling, signal conditioning, sampling, and supervisory control. The four-channel event system is particularly valuable when several peripheral actions must occur with predictable timing. Program memory can be updated in-system, supporting configuration changes and firmware maintenance, while read-while-write operation allows code execution to continue when flash locations do not overlap the active program section.
Typical uses include industrial sensor nodes, building-automation controllers, motor-control interfaces, compact data loggers, communication modules, and embedded measurement equipment. The combination of SRAM, EEPROM, timers, ADC channels, and serial peripherals allows one device to consolidate functions that might otherwise require several discrete components.
The primary design consideration is package and firmware compatibility. A 64-pin TQFP footprint requires adequate PCB routing space, and new designs should follow the Microchip pin description, recommended decoupling, clock, and programming-interface layouts. Firmware replacement also requires review of boot sections, interrupt vectors, peripheral resources, and application-specific timing rather than treating every electrically similar device as functionally identical.
This product record combines manufacturer specifications, package details, sourcing guidance, and engineering-focused design guidance to support initial component selection and board-level implementation. It also distinguishes exact ordering variants from genuine pin-compatible alternatives so that footprint and firmware decisions are not based solely on a matching package name.
Аналоги без доработки для ATXMEGA32C3-AU — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ATXMEGA32C3-AU (тот же форм-фактор и посадочное место) — отличается по Package, Event System Channels, Flash Memory.
Для этого товара нет аналогов без доработки.
Запросить аналогиATXMEGA32C3-AU Максимальные параметры и электрические характеристики
| Microcontroller Type | 8/16-bit AVR XMEGA microcontroller |
| Maximum Clock Speed | 32 MHz |
| Flash Memory | 32 KB |
| Flash Organization | 16K x 16 bits |
| Boot Loader Section | 8 KB |
| EEPROM Memory | 2 KB |
| SRAM | 4 KB |
| ADC Resolution | 12 bits |
| Рабочее напряжение питания | 1.6 V to 3.6 V |
| Event System Channels | 4 channels |
| Корпус | 64-pin TQFP, 14 mm x 14 mm |
| Тип монтажа | Surface mount |
| Temperature Grade | Industrial temperature |
| Program Memory Type | Flash |
| Programmable Flash | In-system programmable with read-while-write |
| Debug Interface | MPLAB Snap compatible, 8-pin SIL connection |
| Programming Interface | In-Circuit Serial Programming (ICSP) |
Руководство по цоколевке ATXMEGA32C3-AU в корпусе 64-pin tqfp, 14 mm x 14 mm
Цоколевка для ATXMEGA32C3-AU (корпус 64-pin tqfp, 14 mm x 14 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для ATXMEGA32C3-AU.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ATXMEGA32C3-AU подходит для 6 применениеs: Industrial Sensor and Condition Monitoring, Building Automation Controller, Compact Motor and Actuator Control, Industrial Communication Gateway, Portable Data Logger, Programmable Control and Automation.
Industrial Sensor and Condition Monitoring
The ATXMEGA32C3-AU suits compact sensor nodes that must acquire analog measurements, apply filtering, and store results locally. Its 12-bit ADC supports typical industrial process inputs, while 4 KB of SRAM provides working space for acquisition buffers and protocol processing. At the same time, 2 KB of EEPROM can retain calibration constants, device identity, and operating counters. The 1.6 V to 3.6 V range supports 1.8 V and 3.3 V designs, and the four-channel event system helps synchronize sampling with timers or communications.
Рекомендуется
Building Automation Controller
A building-automation controller can use the ATXMEGA32C3-AU to coordinate digital inputs, relay-control signals, serial sensors, and periodic status reporting. Its 32 KB of Flash accommodates application firmware, a bootloader, and configuration logic, while the 8 KB boot section supports controlled firmware updates. The event system provides deterministic coordination among timers and communications, reducing the need to poll every peripheral. EEPROM is useful for retaining room mappings and calibration values, while the 64-pin TQFP provides access to a broad peripheral set in a compact industrial controller.
Рекомендуется
Compact Motor and Actuator Control
The ATXMEGA32C3-AU can coordinate timers, pulse-width modulation, position inputs, and actuator commands in compact motor-control subsystems. Its 32 MHz processing rate provides headroom for control calculations and supervisory logic, while the four-channel event system helps trigger timed actions without relying entirely on software polling. The 12-bit ADC can monitor analog feedback from current or position sensors. Firmware designers should reserve timing-critical peripherals and use PWM outputs for deterministic actuator drive rather than bit-banged timing.
Рекомендуется
Industrial Communication Gateway
The ATXMEGA32C3-AU is appropriate for a compact gateway that terminates local serial traffic, validates frames, and transfers summarized information to a higher-level controller. Its 4 KB of SRAM can hold partial protocol frames and working buffers, while 32 KB of Flash is sufficient for protocol stacks and configuration logic. The hardware event system supports deterministic timing for periodic transmission and reception events. For standards-compliant isolated RS-485 or CAN connectivity, pair the MCU with a dedicated interface transceiver and validate timing under the required bus loading.
Рекомендуется
Portable Data Logger
The ATXMEGA32C3-AU can serve as the control and processing element of a compact data logger when the design must remain within a constrained memory and power budget. EEPROM can store configuration and status information, while Flash supports firmware, event handling, and data-format routines. The 12-bit ADC handles basic analog measurements, and the event system can schedule regular sampling without continuous interrupt activity. A practical design should add external nonvolatile storage when log capacity exceeds the MCU's 32 KB Flash and should account for the energy cost of frequent writes.
Рекомендуется
Programmable Control and Automation
The ATXMEGA32C3-AU is well suited to programmable control panels and compact automation modules combining local I/O, analog acquisition, timers, and serial configuration. Its 32 MHz clock supports responsive menu, logging, and supervisory routines, while in-system programmable Flash permits firmware maintenance through an established bootloader. The 64-pin TQFP exposes enough pins for multiple digital inputs, outputs, and communications in a modest board area. Keep high-current loads off the MCU pins and use suitable drivers, protection networks, and power regulation for actuators.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ATXMEGA32C3-AU — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Package | 64-pin TQFP, 14 mm x 14 mm |
| Brand | Microchip Technology |
| Maximum Clock Speed | 32 MHz |
| Flash Memory | 32 KB |
| EEPROM Memory | 2 KB |
| SRAM | 4 KB |
| ADC Resolution | 12 bits |
| Operating Supply Voltage | 1.6 V to 3.6 V |
| Event System Channels | 4 channels |
| Temperature Grade | Industrial temperature |
Ключевые отличия
- Hardware event-system support for coordinated peripheral timing (против ATXMEGA128C3-AU)
- Balanced embedded memory configuration (против ATXMEGA128C3-AU)
- On-chip measurement and event-driven control (против ATSAM4S16BB-AN)
Заметки по проектированию
Use the manufacturer 64-pin TQFP land pattern and verify pin 1 orientation against the PCB assembly drawing. Place all required supply-decoupling capacitors directly beside the corresponding power and ground pins, with short, low-impedance connections. Route the analog input, external clock, reset, and programming signals away from switching nodes and switching-regulator inductors. Adequate copper and ground-plane continuity are important because the package exposes many high-frequency-capable pins in a compact 14 mm by 14 mm footprint.
Design the supply for the full 1.6 V to 3.6 V operating range and check every input and output pin for its voltage-domain limits. Provide a regulator with suitable transient response for the 32 MHz operating condition, and verify brownout behavior during startup, sleep transitions, and load changes. The MCU's analog and digital functions should share a stable ground reference; split-plane changes or long return paths can degrade ADC measurements even when the supply voltage itself appears correct.
Preserve the reset line and the two I/O pins used by the 8-pin SIL debug connection because the Microchip product page identifies this interface for MPLAB Snap debugging and ICSP programming. Keep programming access accessible in the assembled enclosure and avoid loading these signals permanently. Maintain a defined state on unused I/O pins during reset and startup, and confirm that external pull-ups, pull-downs, and peripheral connections do not interfere with programming or debug operation.
Do not treat a different XMEGA32C3 ordering code as interchangeable without checking the package and suffix. The ATXMEGA128C3-AU has a larger memory configuration, and other family members may differ in memory size, package, temperature grade, or pinout. A genuine replacement must match the PCB footprint and pin functions, then undergo firmware, timing, brownout, peripheral, and programming validation. Confirm the final ordering code on the package drawing and the manufacturer product page before releasing a production BOM.
Информация о соответствии
The industrial-temperature and green designations in the catalog listing do not independently establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals compliance. Obtain the current manufacturer product declarations before making a compliance claim.
