BCM5325EIQMG - Six-Port Ethernet Switch | Broadcom
Артикул: BCM5325EIQMG ✓ АктивенBCM5325EIQMG Обзор
An Ethernet switch controller is a semiconductor that coordinates traffic between multiple network ports. In the product hierarchy, a switch controller is an Ethernet interface IC, then a networking semiconductor and a communications integrated circuit. Unlike a discrete switch assembled from separate PHYs and a switching block, the BCM5325E consolidizes the switch fabric, physical-layer transceivers, MACs, packet buffering, and address-management functions into one CMOS device, reducing board-level integration and simplifying multiport network design.
The principal feature is its six-port architecture with integrated PHY transceivers. IEEE 802.3 support covers conventional Ethernet operation, while IEEE 802.3u adds Fast Ethernet operation and IEEE 802.3x provides flow-control support. Combining six ports, packet buffers, and a non-blocking fabric in one 128-pin package makes the BCM5325E suitable for compact Ethernet switches, gateways, and embedded networking equipment where board area and external-component count are important.
The BCM5325E uses a 0.18-μm CMOS implementation to integrate the switch system on a single device. Its internal architecture separates port reception and transmission from the non-blocking switch fabric while using dedicated packet buffers and address management. This integration allows a five-port or six-port design to share centralized switching resources, although the final port configuration depends on the product variant, board design, firmware, and system requirements documented by Broadcom.
Typical applications include five-port and six-port Ethernet switches, network-interface equipment, broadband access products, and industrial Ethernet gateways. The integrated PHY transceivers can simplify designs that require several 10/100-class Ethernet ports close to a system processor. Products requiring different media types, higher port counts, or additional physical layers may need companion Ethernet interface devices or a different switch architecture.
PCB design should prioritize clean supply distribution, controlled-return paths, and high-speed signal integrity around the switch and PHY circuitry. Review the BCM5325E Product Brief and package documentation for the exact pin assignments, exposed-pad requirements, clocking, reference components, and layout constraints before releasing a new board; do not infer these details from the generic 128-pin package description.
This product page brings together the Broadcom product-brief architecture, IEEE support, package information, application guidance, and sourcing information in a format intended to accelerate initial device selection. The BCM5325EIQMG is best evaluated as an integrated multiport Ethernet switching solution rather than as a general-purpose processor or a discrete network transceiver.
Аналоги без доработки для BCM5325EIQMG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Для этого товара нет аналогов без доработки.
Запросить аналогиBCM5325EIQMG Максимальные параметры и электрические характеристики
| Product Type | Six-port Ethernet switch controller |
| Number of Ports | 6 ports |
| Process Technology | 0.18-μm CMOS |
| Integrated Functions | Packet buffers, PHY transceivers, MACs, address management, and non-blocking switch fabric |
| Ethernet Standard Support | IEEE 802.3, IEEE 802.3u, and IEEE 802.3x |
| IEEE 802.3 Support | Supported |
| IEEE 802.3u Support | Supported |
| IEEE 802.3x Support | Supported |
| Число выводов | 128 pins |
| Тип монтажа | Surface mount |
| Legacy Compatibility | Pin-compatible with BCM5325M ROBOSwitch |
| Switch Fabric Architecture | Non-blocking |
| Integrated PHY Transceivers | Yes |
| Integrated MACs | Yes |
| Integrated Address Management | Yes |
Руководство по цоколевке BCM5325EIQMG в корпусе standard
Цоколевка для BCM5325EIQMG (корпус standard). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для BCM5325EIQMG.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
BCM5325EIQMG подходит для 6 применениеs: Six-Port Ethernet Switch, Broadband Access Gateway, Industrial Ethernet Gateway, Network-Interface Equipment, Embedded Network Appliance, Home Networking Controller.
Six-Port Ethernet Switch
The BCM5325EIQMG fits a six-port Ethernet switch because it integrates PHY transceivers, MACs, packet buffers, address management, and a non-blocking switch fabric in one 128-pin device. IEEE 802.3, IEEE 802.3u, and IEEE 802.3x support covers the core Ethernet and flow-control functions required in a multiport system. Consolidation reduces the number of separate PHY and switching components, but board validation must still address clocking, thermal performance, and high-speed return-path control.
Рекомендуется
Broadband Access Gateway
In a broadband access gateway, the BCM5325EIQMG can centralize multiple Ethernet connections while handling frames through its integrated switch fabric. Six integrated ports provide a practical foundation for service-edge equipment with several customer-facing or management interfaces. The 0.18-μm CMOS switch integrates buffering, PHYs, MACs, and address management, while IEEE 802.3x support is relevant to flow control. Thermal, isolation, and surge requirements remain product-level design constraints.
Рекомендуется
Industrial Ethernet Gateway
The BCM5325EIQMG can serve as the multiport Ethernet switching element in an industrial gateway that connects sensors, controllers, and supervisory equipment. Its six-port configuration and integrated PHY transceivers support compact field-side products with limited board area. IEEE 802.3-family compliance provides the basic Ethernet behavior, while the non-blocking fabric and packet buffers assist simultaneous traffic handling. Confirm the device’s temperature and qualification ratings before using it in harsh industrial environments.
Рекомендуется
Network-Interface Equipment
Network-interface equipment can use the BCM5325EIQMG to combine several Ethernet-facing ports with centralized packet handling. Integrating the PHYs, MACs, address management, packet buffers, and switch fabric shortens the signal path compared with a discrete implementation and reduces board-level component count. The 128-pin package requires careful layout planning, so designers should follow the manufacturer’s reference circuits and package constraints. Additional media or higher-speed links may require separate interface ICs.
Рекомендуется
Embedded Network Appliance
The BCM5325EIQMG is appropriate for embedded appliances requiring several local Ethernet ports but limited external interface components. Its integrated six-port switch architecture can connect embedded modules, service interfaces, and management ports through a common non-blocking fabric. IEEE 802.3u support is relevant to 100-Mbit/s Ethernet equipment, while IEEE 802.3x provides flow-control behavior. Firmware, media support, reset sequencing, and thermal conditions must be validated as part of the complete appliance design.
Рекомендуется
Home Networking Controller
The BCM5325EIQMG can support a compact home-networking switch platform by combining multiple Ethernet ports and internal traffic management in one controller. The integrated PHY transceivers are useful in consumer gateways and distributed access devices where PCB space is constrained, while address management and packet buffers support centralized switch operation. IEEE 802.3, IEEE 802.3u, and IEEE 802.3x support covers the relevant Ethernet and flow-control functions. Final compliance testing remains necessary for the finished network product.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для BCM5325EIQMG — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Brand | Broadcom |
| Switch Port Count | 6 ports |
| Product Type | Ethernet switch controller |
| Process Technology | 0.18-μm CMOS |
| IEEE 802.3 | Supported |
| IEEE 802.3u | Supported |
| IEEE 802.3x | Supported |
| Switch Fabric | Non-blocking |
| Integrated Functions | Packet buffers, PHY transceivers, MACs, address management, and switch fabric |
| Legacy Compatibility | Pin-compatible with BCM5325M ROBOSwitch |
Ключевые отличия
- Six integrated Ethernet ports in one switching controller (против BCM5325M)
- Feature-enhanced Broadcom switch architecture (против BCM5325M)
- Integrated switching and physical-layer functionality (против BCM5325M)
Заметки по проектированию
Use the BCM5325E package drawing and reference layout before assigning Ethernet traces. Route high-speed pairs as controlled-impedance connections with continuous reference planes, avoid splits beneath the switching circuitry, and keep PHY-related components close to their associated pins. The 128-pin package provides many signal and supply connections, so an explicit layer-stackup and via-transition plan is important for maintainable signal integrity.
Partition supplies by the requirements in the manufacturer’s reference circuit rather than assuming every rail has identical filtering. Place required bypass capacitors at their specified package pins and provide low-impedance return paths for each supply domain. Review startup sequencing and current limits in the complete documentation before power is applied. PCB thermal performance should be assessed using the final copper, enclosure, airflow, and worst-case traffic conditions.
Do not treat the statement that BCM5325E is pin-compatible with BCM5325M as proof that every firmware, electrical, thermal, or lifecycle requirement is identical. Check ordering suffixes, package construction, operating limits, supported port features, clock requirements, and software dependencies before substituting either device. Likewise, the reference to six ports does not by itself define the speed, media, or operating mode of every port in the finished product.
Pay particular attention to clock, reset, and management interfaces because switch functionality depends on stable timing and correct initialization. Keep sensitive control traces away from high-energy switching paths and follow the manufacturer’s recommended component-placement and grounding conventions. Validate Ethernet compliance with the actual magnetics, connector, cable, and firmware configuration; successful data transmission alone is not a substitute for protocol and EMC testing.
Информация о соответствии
The Broadcom BCM5325E Product Brief identifies IEEE 802.3, IEEE 802.3u, and IEEE 802.3x compliance. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product declaration or product-page documentation.
