ROHM Semiconductor

BD3893FV-E2 3-5.5V Sensor Signal Processor | ROHM

Артикул: BD3893FV-E2 ✓ Активен
3 V to 5.5 V Vdss 50 MΩ Rds(on) 16-SSOP-B Package
MOQ: 1 |

BD3893FV-E2 Обзор

The ROHM Semiconductor BD3893FV-E2 is an analog signal-processor IC for sensor interfaces, featuring analog input and analog output in a 16-SSOP-B package. It operates from a 3 V to 5.5 V supply and includes a built-in 50 MΩ resistance for the pre-amplifier, making it suitable for shock-sensor signal conditioning in HDD, CD, and DVD drives.

A sensor signal processor is a specialized interface IC that converts a weak or variable sensor signal into a form suitable for further detection or control. Its role within the hierarchy is sensor interface IC → signal-processor IC → analog interface circuit. The BD3893FV-E2 can support both voltage-sensitivity and electric-charge-sensitivity shock-sensor designs, reducing the amount of external signal-conditioning circuitry required near a storage-drive actuator or sensor.

The principal features include a 3 V to 5.5 V operating supply range, analog input and output, an integrated 50 MΩ pre-amplifier resistance, and support for voltage-sensitive and charge-sensitive shock sensors. These characteristics make the device applicable where a sensor signal must be amplified or conditioned before being interpreted by another control or signal-processing circuit. Tape-and-reel packaging supports automated production handling.

The BD3893FV-E2 belongs to ROHM Semiconductor's sensor-interface product category and is specified for a 16-pin SSOP-B package measuring approximately 0.175 inch by 4.40 mm. Its analog architecture is intended for dedicated sensing systems rather than general-purpose data acquisition. The integrated pre-amplifier resistance can simplify the sensor network, but the complete circuit still requires suitable passive components, grounding, and protection appropriate to the mechanical shock and electrical-noise environment.

Typical applications include HDD, CD, and DVD drive shock sensors, where the IC can process a mechanical-impact or vibration signal close to the drive mechanism. It may also be evaluated in optical-disc mechanisms, compact electromechanical assemblies, and other sensor systems that use analog shock detection. The 3 V to 5.5 V supply range is compatible with common embedded and storage-system supply rails.

When designing around the BD3893FV-E2, match the sensor type to the voltage-sensitive or electric-charge-sensitive interface method and keep sensitive analog traces away from switching and high-current paths. Validate the pre-amplifier network, input filtering, grounding, and output range against the intended mechanical shock profile. Use the manufacturer pin-description table when assigning PCB tracks because complete pin names are not reproduced on this page.

This page combines the confirmed operating limits, package information, application context, practical circuit guidance, and sourcing information for BD3893FV-E2. It also distinguishes documented device characteristics from order-code and mechanical details that require confirmation during component qualification.

Аналоги без доработки для BD3893FV-E2 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Для этого товара нет аналогов без доработки.

Запросить аналоги

BD3893FV-E2 Максимальные параметры и электрические характеристики

Device Type Analog signal processor IC
Signal Input Analog input
Signal Output Analog output
Supply Voltage Range 3 V to 5.5 V
Built-in Pre-amplifier Resistance 50 MΩ
Supported Shock Sensor Type 1 Voltage-sensitivity type
Supported Shock Sensor Type 2 Electric-charge-sensitivity type
Package Type 16-SSOP-B
Package Width 0.175 inch
Package Length 4.40 mm
Primary Application HDD, CD, and DVD drives
Тип монтажа Surface mount
Packaging Tape and reel
Lead-Free Status Lead-free
Количество выводов 16 pins

Руководство по цоколевке BD3893FV-E2 в корпусе 4.40 mm

Цоколевка для BD3893FV-E2 (корпус 4.40 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 4.40 mm для BD3893FV-E2

Нет подробных данных о распиновке для BD3893FV-E2.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

BD3893FV-E2 подходит для 6 применениеs: Hard Disk Drive Shock Detection, CD and DVD Drive Protection, Voltage-Sensitive Shock Sensor Interface, Electric-Charge-Sensitive Shock Sensor Interface, Optical-Drive Actuator Protection, Compact Electromechanical Vibration Monitoring.

🖥️

Hard Disk Drive Shock Detection

The BD3893FV-E2 fits HDD shock-detection circuitry because it combines analog input and output with a built-in 50 MΩ pre-amplifier resistance. Operated from a supply between 3 V and 5.5 V, it can condition the weak mechanical-impact signal generated near the drive mechanism before it reaches a controller or threshold detector. Its dedicated sensor-interface architecture is more appropriate than a general-purpose amplifier when the design must match the manufacturer's voltage-sensitive or charge-sensitive interface circuit.

💿

CD and DVD Drive Protection

Optical-disc mechanisms can use the BD3893FV-E2 to process shock signals generated during seeks, loading, or sudden mechanical disturbance. The IC's 3 V to 5.5 V operating range is compatible with common embedded drive electronics, while analog input and output support a dedicated conditioning path. The built-in 50 MΩ resistance can simplify the pre-amplifier network, although the external filter and sensor components must follow the application circuit and be validated over the intended shock profile.

⚡

Voltage-Sensitive Shock Sensor Interface

The BD3893FV-E2 supports voltage-sensitivity-type shock sensors used to detect impact or vibration in compact electromechanical equipment. Its analog input receives the sensor-derived voltage, and the integrated 50 MΩ pre-amplifier resistance provides a defined starting point for signal conditioning. Because the IC operates from 3 V to 5.5 V, it can be used near common embedded rails. The sensor impedance, bandwidth, and input range must be checked against the manufacturer application circuit.

🔧

Electric-Charge-Sensitive Shock Sensor Interface

For an electric-charge-sensitive shock sensor, the BD3893FV-E2 provides analog signal-processing functions in a compact 16-SSOP-B package. The device is specifically described for both voltage-sensitive and electric-charge-sensitive sensor types, allowing a drive-protection design to use the dedicated shock-sensor interface function instead of several unrelated analog stages. The 3 V to 5.5 V supply range supports embedded systems, but charge leakage, sensor geometry, grounding, and protection require prototype validation.

📀

Optical-Drive Actuator Protection

The BD3893FV-E2 can participate in an actuator-protection circuit that converts a mechanical disturbance from an optical-drive mechanism into a processable analog signal. Analog input accepts the sensor path, while analog output supports downstream comparison, filtering, or controller monitoring. The integrated 50 MΩ pre-amplifier resistance reduces the need for a discrete high-value feedback element when the circuit follows the manufacturer's configuration. Its 3 V to 5.5 V supply range aligns with common embedded drive rails.

🏭

Compact Electromechanical Vibration Monitoring

The BD3893FV-E2 can be evaluated in compact vibration-monitoring assemblies that use analog shock or impact sensors rather than a general-purpose data-acquisition converter. The dedicated analog input and output architecture, 3 V to 5.5 V supply range, and 50 MΩ pre-amplifier resistance provide the basic signal-conditioning functions needed in a dedicated embedded detector. Carefully assess noise, sensor impedance, input range, and environmental requirements before adapting the circuit beyond HDD, CD, or DVD applications.

What is the ROHM Semiconductor BD3893FV-E2?
The ROHM Semiconductor BD3893FV-E2 is an analog signal-processor IC designed for shock-sensor interfaces in HDD, CD, and DVD drives. According to the manufacturer datasheet, it accepts analog input, provides analog output, operates from 3 V to 5.5 V, and contains a built-in 50 MΩ pre-amplifier resistance. The device is supplied in a 16-SSOP-B package.
What is the operating voltage of BD3893FV-E2?
The BD3893FV-E2 operates from 3 V to 5.5 V. This range allows use with common embedded and optical-drive power rails. The manufacturer datasheet identifies the IC as an analog signal processor with analog input and analog output functions, so the supply range should be treated as the device operating limit rather than the allowable analog signal range.
Where can I download the BD3893FV-E2 datasheet PDF?
The BD3893FV-E2 datasheet PDF is linked on this page. It describes the 3 V to 5.5 V supply range, analog input and output architecture, built-in 50 MΩ pre-amplifier resistance, 16-SSOP-B package, and support for voltage-sensitive and electric-charge-sensitive shock sensors. Use the manufacturer pin-description table for final signal assignments and application-circuit values.
Where can I find the BD3893FV-E2 pinout?
The BD3893FV-E2 pin assignments are found in the pin-description table of the manufacturer datasheet. The device has 16 pins in a 16-SSOP-B surface-mount package. Do not infer pin functions from a generic SSOP drawing because analog input, analog output, supply, ground, and configuration connections must be assigned according to the specific BD3893FV-E2 diagram.
What sensor types are supported by BD3893FV-E2?
The BD3893FV-E2 supports voltage-sensitivity and electric-charge-sensitivity shock sensors. According to the manufacturer datasheet, it also includes a built-in 50 MΩ resistance for the pre-amplifier. These features position the device for HDD, CD, and DVD drive applications where an impact or vibration signal must be conditioned before further processing.
What are the key specifications of BD3893FV-E2 that engineers should know?
The BD3893FV-E2 combines a 3 V to 5.5 V supply range, analog input, analog output, and a built-in 50 MΩ pre-amplifier resistance in a 16-SSOP-B package. The manufacturer datasheet also identifies voltage-sensitive and electric-charge-sensitive shock-sensor applications for HDD, CD, and DVD drives, making supply compatibility and sensor interface type the principal selection criteria.
Can BD3893FV-E2 be used in an HDD shock-sensing circuit?
Yes, the BD3893FV-E2 is specifically identified for HDD, CD, and DVD drive shock-sensor applications. Its analog input and output support sensor-signal conditioning, while the integrated 50 MΩ pre-amplifier resistance can simplify the sensing network. Final suitability depends on matching the sensor's voltage-sensitive or charge-sensitive output to the circuit described in the manufacturer datasheet.
Is BD3893FV-E2 suitable for a 5 V sensor interface?
The BD3893FV-E2 is suitable for a nominal 5 V design because its specified operating supply range is 3 V to 5.5 V. The analog input, analog output, and integrated 50 MΩ pre-amplifier resistance support shock-sensor conditioning. Check the individual pin voltage limits and application-circuit values in the manufacturer datasheet before applying the full 5 V rail.
What is the difference between BD3893FV-E2 and BD3893FV?
BD3893FV-E2 is the orderable tape-and-reel designation associated with the 16-SSOP-B package, while BD3893FV is the base device listing without the E2 suffix. The E2 ordering information identifies tape-and-reel packaging. Treat the suffix as a procurement detail and confirm that the pinout, electrical limits, and application circuit are identical before making a direct substitution.
When should I choose BD3893FV-E2 for a sensor design?
Choose BD3893FV-E2 when a compact HDD, CD, or DVD mechanism needs dedicated processing for a voltage-sensitive or electric-charge-sensitive shock sensor. Its 3 V to 5.5 V supply range, analog signal path, and integrated 50 MΩ pre-amplifier resistance align with embedded drive electronics. It is less suitable when a general-purpose amplifier or programmable sensor interface is required.
Is BD3893FV-E2 the same as a generic SSOP-16 interface IC?
No, the BD3893FV-E2 is not interchangeable with a generic SSOP-16 solely because both use 16 pins. Its documented functions include analog input, analog output, a built-in 50 MΩ pre-amplifier resistance, and operation from 3 V to 5.5 V. A functional substitute must match the complete pin assignment, sensor interface method, and analog operating limits.
What can replace BD3893FV-E2?
BD3893FV-E2 should be replaced only by a 16-SSOP-B device with an identical pin assignment, compatible 3 V to 5.5 V analog operation, and equivalent support for the selected shock-sensor interface. No cross-brand drop-in equivalent is recommended without a complete pin and parameter comparison. The BD3893FV base order code may be relevant, but its procurement suffix and device equivalence should be confirmed first.
What is the best cross-brand equivalent for BD3893FV-E2?
No cross-brand drop-in equivalent should be selected for BD3893FV-E2 based only on its 16-SSOP-B package. The replacement must also reproduce the analog input and output pin functions, 3 V to 5.5 V operating range, 50 MΩ pre-amplifier arrangement, and voltage-sensitive or charge-sensitive sensor behavior. Use a parametric cross-reference tool and then validate every pin against the manufacturer diagrams.
Where can I buy BD3893FV-E2 online?
Use the Request a Quote form on this page to request BD3893FV-E2 availability, current lead time, and ordering options for the tape-and-reel order code. The confirmed commercial configuration is the 16-SSOP-B package with tape-and-reel packaging. Request the exact MPN on the quote form so the inquiry cannot be confused with the base BD3893FV listing.
What is the price and lead time of BD3893FV-E2?
Use the Request a Quote form on this page for the current BD3893FV-E2 commercial quotation, stock status, minimum order quantity, and lead time. The confirmed configuration is ROHM Semiconductor's 16-SSOP-B tape-and-reel order code. A quote request is the most reliable way to establish the current commercial terms for this exact MPN.

Справочные инженерные данные для BD3893FV-E2 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose BD3893FV-E2 for HDD, CD, or DVD mechanisms that use a dedicated shock-sensor signal path and require analog conditioning around a 3 V to 5.5 V rail. Its integrated 50 MΩ pre-amplifier resistance and support for voltage-sensitive or electric-charge-sensitive sensors make it more purpose-specific than a generic SSOP amplifier. Consider BD3893FV when its procurement configuration and device equivalence are confirmed for the same production process. Do not select a generic 16-SSOP interface IC based on footprint alone; the replacement must match all 16 pin functions, analog input and output limits, sensor interface method, and grounding requirements. For a new design, begin with the manufacturer application circuit and validate noise immunity, sensor impedance, startup behavior, and mechanical-shock thresholds on prototypes.

Сравнение с аналогами

Параметр Этот товар
Package 16-SSOP-B
Brand ROHM Semiconductor
Supply Voltage Range 3 V to 5.5 V
Device Type Analog signal processor IC
Input Signal Type Analog input
Output Signal Type Analog output
Built-in Pre-amplifier Resistance 50 MΩ
Shock Sensor Support Voltage-sensitivity and electric-charge-sensitivity types
Primary Applications HDD, CD, and DVD drives
Packaging Tape and reel

Ключевые отличия

  • Integrated high-value pre-amplifier resistance (против BD3893FV)
  • Dedicated support for two shock-sensor interface methods (против BD3893FV)
  • Common embedded supply compatibility (против BD3893FV)

Заметки по проектированию

Route the sensor and pre-amplifier portion of the circuit away from switching-regulator, motor-driver, and write-driver traces. Keep the BD3893FV-E2 ground connection short and use a quiet ground reference for the analog network. The built-in 50 MΩ resistance is sensitive to leakage from board contamination and adjacent circuitry, so clean the PCB and verify the actual sensor impedance during prototype testing.

Operate the BD3893FV-E2 from a supply within its specified 3 V to 5.5 V range and place suitable bypass capacitance close to the supply and ground pins. Check the application's supply tolerance, startup sequence, and noise because analog sensor thresholds can respond to rail ripple or shared-ground current. Use the manufacturer application circuit as the starting point for component values and decoupling placement.

Place the sensor input, pre-amplifier, and output filter components close to their corresponding BD3893FV-E2 pins to minimize parasitic capacitance and resistance. Avoid routing sensitive analog traces beneath digital or power-switching sections of the board. The 16-SSOP-B footprint is compact, so preserve solder-mask spacing and ground-copper geometry around the package when the mechanical shock environment is severe.

Do not select the IC solely by its 16-pin SSOP outline or 3 V to 5.5 V supply rating. Voltage-sensitive and electric-charge-sensitive sensor circuits can require different external networks even though the same device supports both methods. Confirm the complete pin description, analog input limits, output range, grounding arrangement, and sensor characteristics in the manufacturer datasheet before releasing a PCB revision.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Yes
Без галогенов
Unknown
Конфликтные минералы
Unknown

The component is identified as lead-free in the manufacturer datasheet. No additional RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals status is stated.

Данные проверены: 2026-11-11 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

BD3893FV-E2 BD3893FV-E2 datasheet BD3893FV-E2 datasheet pdf BD3893FV-E2 pinout BD3893FV-E2 3V 5.5V BD3893FV-E2 50M ohm BD3893FV-E2 shock sensor BD3893FV-E2 replacement BD3893FV-E2 equivalent ROHM BD3893FV-E2 BD3893FV-E2 price BD3893FV-E2 stock

Связанные компоненты & термины

ROHM Semiconductor BD3893FV-E2 BD3893FV analog signal processor sensor interface IC signal processor IC analog input analog output pre-amplifier 50 MΩ resistance shock sensor voltage-sensitivity-type sensor electric-charge-sensitivity-type sensor HDD CD drive DVD drive 16-SSOP-B SSOP-16 surface mount semiconductor 3 V to 5.5 V power supply lead-free
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ