Silicon Labs

C8051F816-GS - 25MHz 8KB Flash MCU | Silicon Labs | Control

Артикул: C8051F816-GS ✗ Снят с производства
1.8 V to 3.6 V Vdss 16-SOIC Package 25 MHz Speed 8 KB (8K x 8) Memory
MOQ: 1 |

C8051F816-GS Обзор

The Silicon Labs C8051F816-GS is an 8-bit C8051F81x mixed-signal microcontroller operating at up to 25 MHz, with 8 KB of programmable Flash memory in a 16-SOIC package. It combines an 8051-compatible core with capacitive-touch sensing and mixed-signal resources for compact embedded-control designs.

An 8-bit microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, and peripherals into one device. The C8051F81x family belongs to the broader hierarchy of embedded processors and 8-bit microcontrollers, providing a deterministic, low-complexity platform for motor, interface, sensing, and industrial-control products.

The C8051F816-GS operates from a 1.8 V to 3.6 V supply, runs at 25 MHz, and provides 8 KB of Flash program memory. Its 10-bit ADC supports analog measurement, while its capacitive-touch engine provides eight CapSense channels. The device also includes 512 bytes of RAM, making it appropriate for compact control loops, touch interfaces, and mixed-signal products that need more capability than a basic logic controller.

The 8051-compatible CISC architecture supports established C8051 development practices, including in-system programming and a mature peripheral model. The 25 MHz operating rate gives designers additional timing headroom for protocol handling, control-loop execution, and periodic sensing. Because the device is a mixed-signal MCU, analog conversion and capacitive-touch measurement can be integrated into the same controller rather than requiring separate discrete interface ICs.

Typical uses include capacitive-touch control panels, industrial HMI modules, compact sensor controllers, small appliance controls, and embedded products with analog monitoring. In a touch-control application, the eight CapSense channels can be evaluated by the MCU while the 10-bit ADC handles a separate analog input. In an industrial controller, the 8-bit Flash footprint and 3 V operating range support cost-sensitive embedded designs.

For a new layout, route the ground and supply pins as specified in the manufacturer datasheet and place decoupling capacitance close to the device. Confirm the exact C8051F816 pin assignments, programming interface, clock configuration, and CapSense PCB recommendations before releasing the PCB because a 16-SOIC footprint alone does not establish functional interchangeability.

This page combines the confirmed C8051F816 operating characteristics, same-package alternatives, comparison data, and application-oriented design guidance. It is intended to help engineers evaluate the MCU for 25 MHz mixed-signal control and capacitive-touch products while recognizing where package, software, and peripheral verification remain necessary.

Аналоги без доработки для C8051F816-GS — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

C8051F816-GSR

✅ Прямая замена
📦 16-SOIC
Identical 25 MHz, 8 KB Flash, and 8-bit C8051F81x ratings; delivery format changes from tube-oriented GS to reel-oriented GSR, with 0% change in the listed core parameters.

📋 Справочный аналог (нет в каталоге)

C8051F804-GS

✅ Прямая замена
📦 16-SOIC
Shares the 16-SOIC C8051F8xx family package; Flash, RAM, ADC, touch-channel, and timing differences require confirmation, so core-parameter proximity is conservatively rated at 70%.

📋 Справочный аналог (нет в каталоге)

C8051F812-GS

✅ Прямая замена ⚠️ Характеристики не проверены
📦 16-SOIC
Same-brand C8051F81x 16-SOIC family member; the C8051F812 has a different Flash configuration from the 8 KB C8051F816, producing an estimated 20% memory difference and 80% overall parameter proximity.

📋 Справочный аналог (нет в каталоге)

C8051F815-GS

✅ Прямая замена ⚠️ Характеристики не проверены
📦 16-SOIC
Same-brand C8051F81x 16-SOIC family member with a larger Flash configuration than the C8051F816; the exact memory difference is conservatively estimated at 20%, yielding 80% parameter proximity.

📋 Справочный аналог (нет в каталоге)

C8051F817-GS

✅ Прямая замена ⚠️ Характеристики не проверены
📦 16-SOIC
Same-brand C8051F81x 16-SOIC family member with a larger Flash configuration than the 8 KB C8051F816; the exact memory difference is conservatively estimated at 20%, yielding 80% parameter proximity.

📋 Справочный аналог (нет в каталоге)

C8051F816-GS Максимальные параметры и электрические характеристики

Product Type 8-bit mixed-signal microcontroller
Series C8051F81x
CPU Architecture 8051-compatible 8-bit CISC
Максимальная тактовая частота 25 MHz
Flash Memory 8 KB (8K x 8)
RAM 512 bytes
ADC Resolution 10 bits
Capacitive Touch Channels 8 channels
Supply Voltage Range 1.8 V to 3.6 V
Nominal Supply Voltage 3 V
Корпус 16-SOIC
Число выводов 16 pins
Program Memory Type Flash
Programming In-system programming
Тип монтажа Surface mount
Статус жизненного цикла Not for new designs
Статус RoHS Compliant

Руководство по цоколевке C8051F816-GS в корпусе 16-soic

Цоколевка для C8051F816-GS (корпус 16-soic). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 16-soic для C8051F816-GS

Нет подробных данных о распиновке для C8051F816-GS.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

C8051F816-GS подходит для 6 применениеs: Capacitive-Touch Control Panels, Industrial Sensor Controllers, Small Appliance Controls, Compact Analog Monitoring Systems, Human-Machine Interface Modules, Embedded Keypads and Access Controls.

🧩

Capacitive-Touch Control Panels

The C8051F816-GS fits compact capacitive-touch panels because its mixed-signal MCU combines eight CapSense channels with a 25 MHz 8051-compatible core in a 16-SOIC package. The controller can scan touch inputs, apply debounce or gesture logic, update indicators, and manage a communications interface without requiring a separate touch-controller IC. Its 8 KB Flash and 512 bytes of RAM provide dedicated space for touch configuration, calibration data, and embedded control logic. The key design consideration is that CapSense performance depends on electrode geometry, guard-ring construction, filtering, and calibration, so follow the manufacturer’s PCB and analog-layout guidance rather than treating the touch function as a generic GPIO input.

🏭

Industrial Sensor Controllers

The C8051F816-GS is appropriate for distributed sensor controllers that need local measurement, control, and communication. Its 10-bit ADC can acquire analog sensor outputs, while the 25 MHz processor provides timing margin for filtering, threshold evaluation, and protocol handling. The 8-bit C8051-compatible architecture also allows reuse of familiar 8051 firmware patterns and in-system programming workflows. For industrial deployments, verify the exact temperature grade and lifecycle requirements before committing the design. Analog signal routing should remain away from touch-sensing and high-switching nodes, and supply decoupling should be placed directly beside the device pins to reduce measurement noise and improve transient response.

🏠

Small Appliance Controls

The C8051F816-GS can serve as the controller in a compact appliance requiring digital logic, analog monitoring, and touch-based user input. Its 25 MHz operating speed supports responsive state-machine execution, while 8 KB of Flash accommodates application firmware and 512 bytes of RAM supports working variables. A capacitive interface can replace discrete buttons without changing the basic product architecture, and the ADC can monitor a potentiometer, sensor, or diagnostic divider. Design the firmware around deterministic polling and debounce behavior, preserve margin in the Flash allocation for future revisions, and confirm that the selected package is compatible with the appliance’s assembly and thermal conditions.

📟

Compact Analog Monitoring Systems

The C8051F816-GS is well matched to compact analog-monitoring systems because it combines a 10-bit ADC, 25 MHz processing capability, and 8 KB of Flash in one 16-SOIC device. The MCU can sample analog inputs, apply scaling and filtering, record operating states, and provide a digital interface to a host or downstream controller. Compared with a discrete ADC plus separate logic device, this integrated approach can reduce board area and simplify firmware coordination. The tradeoff is that the 10-bit resolution and 8-bit CPU require careful sensor scaling and may not satisfy high-precision instrumentation without external analog components. Validate ADC accuracy, reference stability, grounding, and input-source settling before production use.

🖥️

Human-Machine Interface Modules

The C8051F816-GS can implement a compact human-machine interface module with capacitive controls, LED status indication, and limited data display or communication functions. Eight CapSense channels support multiple touch areas, while the 25 MHz core can service button logic, state updates, and serial communication. The device’s 16-SOIC footprint supports relatively compact board construction, although the 8 KB Flash limit constrains elaborate graphics and large protocol stacks. Use the MCU to centralize user input and interface state, provide deterministic debounce and long-press handling, and avoid placing high-current display or switching loads adjacent to sensitive touch electrodes. Confirm pin multiplexing and peripheral conflicts in the manufacturer documentation.

🔐

Embedded Keypads and Access Controls

The C8051F816-GS suits compact embedded keypads, access-control panels, and credential-entry modules that require touch sensing alongside low-voltage digital control. The eight CapSense channels can support multiple electrodes, while the 10-bit ADC can monitor a supply or auxiliary analog input. A 25 MHz 8051-compatible processor provides enough control capability for event handling, indicator control, and communication tasks while remaining simple to program with established 8051 tools. Security-sensitive access products should add appropriate authentication and tamper-detection measures rather than relying on the MCU alone. PCB electrode spacing, shield patterns, grounding, and operating-environment qualification are especially important because moisture, temperature, and nearby conductors can change capacitive measurements.

Сводка рекомендуемых товаров

C8051F816-GS Silicon Labs Используется в: Capacitive-Touch Control Panels, Industrial Sensor Controllers, Small Appliance Controls, Compact Analog Monitoring Systems, Human-Machine Interface Modules, Embedded Keypads and Access Controls C8051F816-GSR Reel-delivery ordering option for automated assembly Используется в: Capacitive-Touch Control Panels, Industrial Sensor Controllers, Small Appliance Controls, Compact Analog Monitoring Systems, Human-Machine Interface Modules, Embedded Keypads and Access Controls
What are the key specifications of C8051F816-GS that engineers should know?
The C8051F816-GS is a 25 MHz, 8-bit C8051F81x mixed-signal microcontroller with 8 KB of Flash memory, 512 bytes of RAM, a 10-bit ADC, and eight capacitive-touch channels. According to the Silicon Labs C8051F81x documentation, it operates from 1.8 V to 3.6 V and is packaged in a 16-SOIC. These characteristics make it suitable for compact products combining digital control, analog measurement, and capacitive-touch input.
Where can I download the C8051F816-GS datasheet PDF?
The C8051F816-GS datasheet is available through the Silicon Labs C8051F81x datasheet listing on Octopart and through the linked C8051F81x documentation archive. The document covers the 25 MHz 8-bit MCU, 8 KB Flash memory, 10-bit ADC, capacitive-touch peripherals, electrical limits, and package information. Use the pin-description table in that document when assigning PCB signals and programming the device.
Where can I find the C8051F816-GS pinout?
The C8051F816-GS pinout is found in the pinout and pin-description tables of the C8051F81x manufacturer datasheet. This 16-pin device uses a 16-SOIC package, but package size alone does not identify individual signal names. Verify power, ground, reset, programming, clock, analog, and touch-sensor assignments directly against the manufacturer table before laying out or modifying a PCB.
Is the C8051F816-GS suitable for capacitive-touch and analog-control applications?
The C8051F816-GS is suitable for capacitive-touch and analog-control applications because it integrates eight capacitive-touch channels and a 10-bit ADC in a 25 MHz 8-bit MCU. According to Silicon Labs product information, the device also includes 512 bytes of RAM and 8 KB of Flash. It is therefore appropriate for compact touch interfaces that also need analog monitoring, status control, and communication handling.
How much Flash memory and RAM does the C8051F816-GS have?
The C8051F816-GS has 8 KB of Flash program memory, organized as 8K x 8, and 512 bytes of RAM. Silicon Labs describes the device as an 8-bit C8051F81x mixed-signal MCU with in-system programming. The 8 KB Flash capacity is suitable for compact embedded applications, but firmware size, bootloader requirements, and data-memory pressure should be checked before finalizing the product design.
What voltage range does the C8051F816-GS operate at?
The C8051F816-GS operates from 1.8 V to 3.6 V, with 3 V identified as the nominal supply in the product description. It is an 8-bit MCU running up to 25 MHz and containing 8 KB of Flash. Use the manufacturer's electrical-characteristics table for operating and absolute-maximum limits, and size power-decoupling networks for the actual clock and peripheral load.
What can replace the C8051F816-GS?
The closest confirmed same-package replacement is the C8051F816-GSR, which retains the 16-SOIC footprint, 25 MHz clock, 8 KB Flash configuration, and 8-bit C8051F81x architecture. The primary ordering difference is the delivery format. Before treating it as a drop-in replacement, verify the complete pin assignment, programming interface, clock setup, CapSense channels, and supply requirements in the manufacturer documentation.
Is C8051F816-GSR the same as C8051F816-GS?
The C8051F816-GSR and C8051F816-GS are the same C8051F816 device family with a 16-SOIC package, 25 MHz maximum clock, and 8 KB Flash memory. Their ordering codes distinguish the packing configuration, with the GS listing associated with tube delivery and the GSR listing associated with reel delivery. They may share core and peripheral ratings, but PCB, firmware, and purchasing substitutions still require final manufacturer verification.
C8051F816-GS vs C8051F816-GSR: which should I choose?
Choose the C8051F816-GS when tube delivery suits the assembly process, and choose the C8051F816-GSR when reel delivery is required by production handling. Both are identified as C8051F81x 8051-compatible, 25 MHz, 8 KB Flash, 16-SOIC microcontrollers. Because the distinction is primarily orderable packaging, verify the exact suffix, pinout, lifecycle status, and firmware target before substituting one for the other.
When should I choose C8051F816-GS over another 8-bit MCU?
Choose the C8051F816-GS when an application needs the combination of an 8051-compatible core, 25 MHz operation, 8 KB Flash, a 10-bit ADC, and eight capacitive-touch channels in a 16-SOIC package. It is especially relevant to compact touch-control and mixed-signal control products. Choose another MCU if the design needs substantially more Flash, RAM, GPIO, ADC channels, or a different software ecosystem.
Is C8051F816-GS suitable for industrial control and sensor applications?
The C8051F816-GS can suit compact industrial-control and sensor applications because it combines a 25 MHz 8051-compatible core, 10-bit ADC, eight CapSense channels, and 8 KB of Flash. Its 1.8 V to 3.6 V operating range also supports low-voltage embedded systems. Industrial suitability still depends on the temperature grade, isolation requirements, EMC design, and long-term availability of the selected ordering code.
What is the best cross-brand equivalent for C8051F816-GS?
No cross-brand drop-in equivalent for the C8051F816-GS was confirmed in the available cross-reference information. A same-package 8-bit microcontroller is not automatically interchangeable because firmware, interrupt handling, analog peripherals, CapSense calibration, and programming interfaces may differ. If cross-brand sourcing is mandatory, evaluate an EFM8 or competing mixed-signal MCU as a redesign candidate and verify its pinout and firmware requirements independently.
How do I request a quote for C8051F816-GS?
Use the Request a Quote form on this page to request current commercial terms, supply status, and lead time for the C8051F816-GS. The manufacturer lists the GS ordering code in tube packaging, while the GSR ordering code supports reel delivery. For production planning, state your required quantity, target date, packaging preference, and whether an AEC-Q100-qualified or temperature-grade variant is required.
Is C8051F816-GS currently in stock?
Current stock should be confirmed through the Request a Quote form on this page rather than inferred from a distributor landing page. Stock can differ between the GS tube configuration and GSR reel configuration, especially for a microcontroller marked not for new designs. Provide your annual usage, order quantity, and required delivery date so the sourcing response reflects the exact C8051F816-GS ordering code.
How much does the C8051F816-GS cost and what is its lead time?
Use the Request a Quote form on this page for the current C8051F816-GS price, minimum order quantity, stock position, and lead time. Commercial terms can vary with quantity, delivery schedule, and whether the order uses the GS tube configuration or GSR reel configuration. For an engineering BOM, include the target quantities for prototype, pilot, and production builds so the quote covers realistic demand.

Справочные инженерные данные для C8051F816-GS — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the C8051F816-GS when a compact product needs an 8051-compatible 8-bit MCU with 25 MHz operation, 8 KB of Flash, a 10-bit ADC, eight capacitive-touch channels, and a 16-SOIC footprint. Select C8051F816-GSR when reel delivery is required for automated assembly, because the listed core ratings and package remain equivalent. Consider C8051F812-GS, C8051F815-GS, or C8051F817-GS only when their memory and peripheral differences are acceptable and the manufacturer confirms pin-level compatibility. C8051F804-GS is another same-package family member, but its lower 70% compatibility estimate requires closer review. For a cross-brand migration, treat an EFM8 or competing mixed-signal MCU as a redesign rather than a blind drop-in replacement, and verify the complete electrical, peripheral, software, and lifecycle requirements before releasing a new PCB.

Сравнение с аналогами

Параметр Этот товар C8051F816-GSR C8051F804-GS C8051F812-GS C8051F815-GS C8051F817-GS
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
CPU Architecture 8-bit 8051-compatible CISC 8-bit 8051-compatible CISC 8-bit C8051F8xx 8-bit C8051F81x 8-bit C8051F81x 8-bit C8051F81x
Maximum Clock Frequency 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz
Delivery Format Tube Reel Tube Tube Tube Tube

Ключевые отличия

  • Combines eight touch channels and a 10-bit ADC in one mixed-signal controller (против C8051F804-GS)
  • Matches the confirmed 25 MHz and 8 KB Flash configuration of the reel-ordering variant (против C8051F816-GSR)
  • Supports an integrated mixed-signal product design in a 16-SOIC package (против AT89C4051-24SU)

Заметки по проектированию

Place the device-side supply-decoupling capacitor immediately beside the appropriate power and ground pins, and keep the trace between them short. Separate sensitive CapSense electrodes from switching nodes, high-current loads, and long parallel traces. Use the manufacturer’s reference layout for guard rings and analog grounding rather than routing touch electrodes directly beneath fast-changing digital or power signals.

Treat analog inputs and capacitive-touch electrodes as separate high-impedance domains. Keep their traces short, avoid vias where possible, and provide a quiet ground reference. Verify filtering, acquisition timing, and electrode calibration across the intended temperature and supply ranges because changes in these conditions can shift touch baselines and analog readings even when the 25 MHz digital section remains stable.

Do not substitute C8051F81x devices based only on the 16-SOIC package and clock rate. Check every pin, peripheral function, programming method, clock configuration, voltage range, ADC behavior, CapSense channel assignment, and firmware target. The 8 KB Flash limit also requires firmware budgeting, including any bootloader, calibration tables, and application updates reserved for later revisions.

Budget the device supply across a 1.8 V to 3.6 V operating range and confirm peak current at the selected 25 MHz operating condition. Use local low-impedance supply routing and suitable bulk decoupling at the board’s power entry point. If the MCU is adjacent to a switching regulator or display load, increase separation and filtering to prevent rail disturbance from affecting ADC readings, touch baselines, or program execution.

Информация о соответствии

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The comparison information identifies the C8051F816-GS as RoHS compliant. No definitive REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement was identified for the exact ordering code.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

C8051F816-GS datasheet C8051F816-GS datasheet pdf C8051F816-GS pinout C8051F816-GS specifications Silicon Labs C8051F816-GS C8051F816-GS equivalent C8051F816-GS replacement C8051F816-GS vs C8051F816-GSR C8051F816-GS price C8051F816-GS stock C8051F816 16-SOIC pinout C8051F816 capacitive touch application

Связанные компоненты & термины

Silicon Labs C8051F816-GS C8051F816-GSR C8051F804-GS C8051F812-GS C8051F815-GS C8051F817-GS C8051F81x 8-bit microcontroller mixed-signal MCU embedded microcontroller 8051-compatible CISC core 16-SOIC SOIC package family surface-mount package CapSense capacitive touch sensing 10-bit ADC Flash memory in-system programming RoHS industrial control sensor controller human-machine interface
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ