CD40102BE - 8-Stage BCD Down Counter | Texas Instruments
Артикул: CD40102BE ✓ АктивенCD40102BE Обзор
A synchronous BCD counter is a logic integrated circuit that advances its internal decimal count on an active clock transition rather than through ripple-style gating. The CD40102BE combines two cascaded 4-bit BCD stages, creating an eight-stage counting architecture with separate decade sections. This device belongs to the broader hierarchy of counter logic, digital logic IC, and CMOS semiconductor families used to implement deterministic state sequencing in electronic systems.
The principal features of the CD40102BE include presettable operation, synchronous down counting, two BCD decades, a four-bit counter interface, and positive-edge triggering. The manufacturer datasheet also identifies the E package as a 16-lead dual-in-line plastic package. The 0.300-inch, 7.62 mm package dimensions describe a leaded through-hole format suitable for conventional PCB assembly, prototyping, repair, and industrial control systems where a surface-mount package would offer no practical benefit.
Operationally, the counter supports clock enable and control functions for coordinating counting with surrounding digital logic. Preset and clear controls allow the count to be initialized from an external BCD value or returned to a defined terminal condition. Because the output indicates the zero count, the circuit can be cascaded with other digital blocks to create longer count intervals, event windows, or repetitive system timing sequences without relying on a microcontroller for simple counting tasks.
Typical uses include industrial batch and cycle counting, laboratory timer modules, digital test equipment, automotive control modules, and general-purpose sequencing logic. The synchronous counting architecture helps maintain a defined relationship between clock edges and count states, while the BCD organization maps directly to decimal displays, decade-based dividers, and equipment that presents count values in human-readable form.
When laying out a board around the CD40102BE, route the clock and control traces away from noisy switching nodes and keep all unused inputs at defined logic levels. Because the E package is a leaded 16-PDIP design, use the manufacturer's pin-description table and package drawing for every connection and verify the correct counter orientation during inspection.
This page combines the manufacturer identification, counter architecture, package details, drop-in sourcing analysis, comparison parameters, and practical implementation guidance. It is intended to help engineers determine whether the CD40102BE matches the required BCD count range, control interface, package, and through-hole assembly process before releasing a production design.
Аналоги без доработки для CD40102BE — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
CD40102BE
✅ Прямая заменаУточнить цену
Открыть даташит →CD40102BE Максимальные параметры и электрические характеристики
| Counter Type | 8-stage preset table synchronous down counter |
| Counting Direction | Down |
| Number of Counter Elements | 2 elements |
| Counter Data Width | 4 bits |
| Counting Format | BCD |
| Number of Decades | 2 decades |
| Total Counter Stages | 8 stages |
| Clock Edge | Positive edge |
| Logic Family | CMOS |
| Presettable | Yes |
| Zero Detection Output | Yes; active when the internal count is zero |
| Корпус | 16-PDIP, 0.300 inch (7.62 mm) |
| Lead Count | 16 leads |
| Способ монтажа | Through-hole |
Руководство по цоколевке CD40102BE в корпусе 16-pdip, 0.300 inch (7.62 mm)
Цоколевка для CD40102BE (корпус 16-pdip, 0.300 inch (7.62 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для CD40102BE.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
CD40102BE подходит для 6 применениеs: Industrial Batch Counter, Programmable Event Timer, Digital Decade Divider, BCD Display Counter, Legacy Sequencing Logic, Laboratory Test Sequence Generator.
Industrial Batch Counter
The CD40102BE fits industrial batch-counting systems that need to decrement from a preset value and stop at a defined terminal event. Its two cascaded 4-bit BCD decades represent 0 through 9 in each section, allowing direct connection to decade-oriented displays or external BCD decoders. The positive-edge clock input supports organized counting from a clean source, while the zero indication supplies a convenient end-of-batch signal. Because the device is packaged in a 16-PDIP through-hole format, it is particularly practical for machinery control boards, test fixtures, and legacy production equipment assembled with leaded components. Confirm the required supply voltage, maximum clock rate, and output timing in the manufacturer datasheet before connecting external sensors or load controls.
Programmable Event Timer
The CD40102BE can implement a programmable event timer by loading a preset count and decrementing it on each positive clock edge. Its 8-stage, two-decade BCD organization permits a decimal timing interval to be represented directly, while the zero-state output marks the end of the interval. This arrangement is useful when a discrete counter must trigger an actuator after a predetermined number of pulses without continuous microcontroller participation. A stable oscillator or external clock determines the time base, so its frequency accuracy and jitter directly affect timer precision. The 16-pin dual-in-line package also makes the circuit approachable for laboratory timers, educational equipment, maintenance instruments, and hand-built control panels where through-hole assembly and easy signal access are valuable.
Digital Decade Divider
The CD40102BE serves as a decade-oriented divider when one output cycle should occur after a selected number of input clocks. Presetting the counter establishes the desired interval, and the zero output can be used to trigger the next state in a longer timing chain. Its two 4-bit BCD stages offer a practical decimal count organization instead of requiring binary-to-BCD conversion elsewhere in the system. The dedicated counter frees the rest of the circuit from repeated counting and comparison tasks. In instrumentation, aging systems, and laboratory fixtures, the part can generate repeatable delayed events from a master clock. Preserve setup and hold timing around preset and clear controls, and use a clean clock source to avoid accumulating timing uncertainty across each count interval.
BCD Display Counter
The CD40102BE is suited to BCD display-counter designs because its two counter elements each present a 4-bit decimal digit. The first decade can feed one display decoder or display driver and the second decade can feed another, allowing a two-digit countdown without binary arithmetic. Positive-edge counting and a dedicated zero output simplify event sequencing around the display. This is useful in process timers, calibration equipment, auction timers, and simple test panels where the displayed number is the primary output. The through-hole 16-PDIP package also eases repair and retrofits. Debounce or qualify the input clock in mechanical applications, observe the manufacturer's timing limits, and select a display decoder with compatible input levels and polarity before final circuit integration.
Legacy Sequencing Logic
The CD40102BE can serve as fixed-sequence logic in legacy equipment that needs a repeatable count and terminal-state indication without adding a microcontroller. A preset count defines the length of each operating interval, and the zero output can gate the next operation, create a one-shot pulse, or advance another counter. Its 8-stage, two-decade BCD architecture makes it appropriate for cycle controllers, sequencers, and repeat-delay modules. The 16-PDIP package remains advantageous in older through-hole designs because it avoids introducing a new footprint and supports field replacement. During modernization, verify that the clock remains within the device's rated frequency, that unused control inputs have defined states, and that any replacement part matches the original pinout and control polarity.
Laboratory Test Sequence Generator
The CD40102BE can divide a master laboratory clock into preset decimal intervals for repeatable test-sequence generation. Two 4-bit BCD stages allow test steps to be counted in decimal decades, and the zero output provides a convenient boundary event for advancing fixtures or synchronizing instrumentation. This makes the device useful in production testers, automated bench fixtures, and educational pulse-counting systems. A dedicated counter offloads timing division from a controller and produces a simple hardware-defined sequence. For dependable results, use a low-jitter clock source, respect the preset timing requirements, and isolate the counter from high-energy switching nodes. The 16-lead through-hole package is easy to prototype and replace, although long-term sourcing should be checked before committing the design to production.
Справочные инженерные данные для CD40102BE — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | CD40102BE |
|---|---|---|
| Brand | Texas Instruments | Harris |
| Package | 16-PDIP | 16-PDIP |
| Counter Type | 8-stage preset table synchronous down counter | 8-stage preset table synchronous down counter |
| Counting Format | BCD | BCD |
Ключевые отличия
- Dedicated two-decade BCD architecture (против CD40102BE from Harris)
- Direct decimal-count implementation (против CD40102BE from Harris)
- Through-hole 16-PDIP integration (против CD40102BE from Harris)
Заметки по проектированию
Use the 16-PDIP footprint and follow the manufacturer package drawing when assigning rows of through-hole pads. Keep the clock and count outputs away from high-current switching nodes to reduce false clock edges. Place any decoupling capacitor close to the device supply pins according to the manufacturer datasheet, and provide a solid ground return for all 16 leads. Confirm pin orientation against the package notch or pin-1 marking before soldering.
Drive the clock input from a clean, low-jitter source and respect the setup and hold requirements for clock, preset, and clear inputs. Debounce mechanical contacts or condition sensor outputs before allowing them to clock the counter, because an extra transition can shift the terminal count by one. If the counter is used as a divider in a precision timer, calculate the oscillator tolerance and jitter budget rather than relying only on the nominal clock frequency.
Do not treat the two decades as one binary counter: the output is BCD, and each 4-bit section represents one decimal digit. Verify the control-input truth table in the manufacturer datasheet, particularly preset priority, clear behavior, clock enable, and the state of the zero output. Also verify that replacement inventory uses the same pinout and control polarity rather than assuming that any CD40102-family counter is interchangeable.
Route the count outputs according to their destination and avoid unnecessarily long traces between the counter and external display or control circuitry. For systems combining this counter with switching converters or relays, separate clock, preset, and clear routing from power-stage paths. A ground-plane layout is preferable where practical, but verify the analog and logic grounding arrangement used by the surrounding board before applying a generic mixed-signal layout.
Информация о соответствии
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for CD40102BE in the available manufacturer and distributor information.